Error in ABAP Objects program - SAP BI
Dear All,
While trying to update infoobject /BIC/ZGROSSPRI in an ODS in BI through an update routine, a syntax error is thrown when I am trying to define a variable of type tys_TG_1-/BIC/ZGROSSPRI. How is it possible to define a variable of type target field(Infoobject) ?
For instance,
DATA: VALUE TYPE tys_TG_1-/BIC/ZGROSSPRI.
The error is :
E:Field "_ty_s_TG_1-/BIC/ZGROSSPRI" is unknown. It is neither in one of the
specified tables nor defined by a "DATA" statement. "DATA" statement.
tys_TG_1-/BIC/ZGROSSPRI is already defined in the Class section as below
TYPES:
BEGIN OF tys_TG_1,
InfoObject: ZGROSSPRI Gross Price in Statistical Currency.
/BIC/ZGROSSPRI TYPE /BIC/OIZGROSSPRI,
END OF tys_TG_1.
Moderator message: please use a more meaningful subject line next time!
Edited by: Thomas Zloch on Apr 10, 2010 7:03 PM
Hi,
Please use :
DATA: VALUE TYPE /BIC/OIZGROSSPRI.
-Vikram
Similar Messages
-
Error : while converting a WD ABAP object into SAP Transaction
Hi,
I am trying to converting a WD ABAP object into SAP Transaction but i am getting the following error while executing the transaction :
Network Access Message: The page cannot be displayed
Technical Information (for Support personnel)
Error Code: 502 Proxy Error. The specified Secure Sockets Layer (SSL) port is not allowed. ISA Server is not configured to allow SSL requests from this port. Most Web browsers use port 443 for SSL requests. (12204)
IP Address: 10.114.6.144
Date: 4/7/2011 10:41:
Please help.> ISA Server is not configured to allow SSL requests from this port. Most Web browsers use port 443 for SSL requests. (12204)
This seems to be your specific network configuration. It seems that your corporate network is blocking HTTPS requests which don't use port 443. Your ABAP system is configured to use a port other than 443. Either talk to your basis admins about changing your ABAP system configuration to use port 443 or talk to your network administrators to allow whichever port the ABAP system is running on. -
Error in TP Abap Objects Programs to MiniWAS 6.20
Hello,
I have install the MiniWAS 6.20 to my pc and I am trying to transport the ABAP OBJECTS programs by following the instractions. Unfortunately, the tp ended with error code 8 and the message is:
Program S_ITAB_ACCESS: Syntax error in line 000060
You cannot specify the component 'TABLE_LINE' fora generic line type in the current statement. allo
Can someone tell me what to do in order to complete this transport?
Thanks in advanceYou can ignore this message, S_ITAB_ACCESS has a syntax error (you can check in se38).
In 46C the syntax was a little bit different:
when you paste this code to a 46C system, the syntax check will be ok.
In higher release it won't be ok. So if you copy it to a customer namerange eg ZS_ITAB_ACCESS and modify like this, it will be ok.
Since you cannot change program S_ITAB_ACCESS, there is not much you can do with the transport.
* READ TABLE tab WITH TABLE KEY table_line = key
READ TABLE tab WITH KEY table_line = key
Incho -
Re : select-options in abap-objects program
Dear friends,
I want to give select-options in abap-objects program. How to give that.
Thanking You
with regards,
ManiIn the transaction SE24, enter your class name, click modify.
in the tab named "Types" you have to declare two types. By example, if you want to receive one select-options that in your program that uses this class is declared like:
" P_SAKNR FOR SKAT-SAKNR".
you've got to declare two types in the class:
a- TYPES: begin of E_S_SAKNR,
sign(1),
option(2),
low(10),
high(10),
end of E_S_SAKNR.
b - TYPES E_T_SAKNR type standard table of E_S_SAKNR.
so, in the class method that you want to receive P_SAKNR as importing parameter. You got to do this:
method TEST importing ET_SAKNR type E_T_SAKNR.
now, in the implementation of this method you should be able to use ET_SAKNR as the same way as you usually use a parameter or a select-option. You could use it in a select with the operator IN by example.. -
Error import ABAP in setup sap system
Dear experts!
Now, I'm getting some issue about setup the sap system.
when I setup the sap system, to step of import abap, I get description the issue according the following:
An error occurred while processing option SAP Business Suite 2005 > SAP ERP 6.0 Support Release 3 > SAP Application Server ABAP > Oracle > Central System > Central System( Last error reported by the step: Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.). You can now:
Choose Retry to repeat the current step.
Choose Log Files to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/BS2005/ERP60SR3/AS-ABAP/ORA/CENTRAL/.
Help me to process the issue.
Best regards, HuyDear you!
when i open log file the system display content according the following:
ERROR: 2014-06-04 14:22:34 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL1' import package is interrupted with R3load error.
Process 'C:\usr\sap\PIE\SYS\exe\uc\NTAMD64\R3load.exe -i SAPAPPL1.cmd -dbcodepage 4103 -l SAPAPPL1.log -stop_on_error' exited with return code 2.
For mode details see 'SAPAPPL1.log' file.
Standard error output:
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2014-06-04 14:22:34 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL2' import package is interrupted with R3load error.
Process 'C:\usr\sap\PIE\SYS\exe\uc\NTAMD64\R3load.exe -i SAPAPPL2.cmd -dbcodepage 4103 -l SAPAPPL2.log -stop_on_error' exited with return code 2.
For mode details see 'SAPAPPL2.log' file.
Standard error output:
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2014-06-04 14:22:34 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL0' import package is interrupted with R3load error.
Process 'C:\usr\sap\PIE\SYS\exe\uc\NTAMD64\R3load.exe -i SAPAPPL0.cmd -dbcodepage 4103 -l SAPAPPL0.log -stop_on_error' exited with return code 2.
For mode details see 'SAPAPPL0.log' file.
Standard error output:
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2014-06-04 14:22:56
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2014-06-04 14:22:56
3 error(s) during processing of packages.
INFO: 2014-06-04 14:22:56
Import Monitor is stopped.
Help me to process the issue!
Best regard, Huy -
Hi all,
I'm starting to play with ABAP Object, and am very comfortable with OO features (coming from Java).
Currently, I am hesitating on the way to code my program flow. Let me explain:
Is it common practice to manage the screens flow within methods (with SET SCREEN etc.)?
I would think that this is kind of bad, since it requires local classes, and is simply kind of weird (to someone coming from Java anyway). Is continuing to handle this via MODULES and such still a good way to go?
Thanks for any enlightenment you can bring me.Hello,
First, I din't mentioned that you said JAVA is better. I just said the things what u can do in JAVA u can achieve and there is a way in ABAP also. I tihnk u misunderstood my statements. :)..no hard feelings...
Ok.
BADI's are kind of Exits. To make it in a simple statement SAP has provided us with a way to enhance the business process.
For example, assume that a business process goes thru step 1, step 2 and so on. Inbetween step1 and step2 you want to do something. For this SAP has provided some standard interface, which will get the information about the business process in step1 in to it. You can make use of that and customize according to your requirement.
Send me you mail ID I will forward good document on BADI's.
Regs,
Venkat Ramanan N -
Error in ABAP Mapping (type SAP-ABAP, kernel error ID UNCAUGHT_EXCEPTION)
Hi ,
Scenario: Manually Purchase Order is created, automatically Sales Order should be created in the Target System through PI,
I have used Message Mapping which is working fine for single Customer and Vendor,
For Multiple Customers and Vendors i am using one ZTABLE, Only Message Mapping is not sufficient to my requirement.
Now i am using both Message Mapping and ABAP Mapping at a time in Interface Mapping. I created the class and done the development., whene i run the scenario i am getting the error as below,
*<SAP:Stack>Error in mapping program ZCL_SD_IDTO_POSO (type SAP-ABAP, kernel error ID UNCAUGHT_EXCEPTION) An exception with the type CX_SY_REF_IS_INITIAL occurred, but was neither handled locally, nor declared in a RAISING clause Dereferencing of the NULL reference</SAP:Stack>*
*<SAP:Retry>M</SAP:Retry>*
*</SAP:Error>*
Please let me know.
Best Regards
VamsiHave u seen the ABAP mapping guide?
Refer this series to the ABAP mapping section.https:///people/sravya.talanki2/blog/2006/12/26/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-ii
It will be very handy and useful. -
Error 00671 ABAP/4 Processor SAP SQL-ARRAY_Insrt_Duprec
Hi Guys,
The user has started transaction VA02 and has added materials to existing order. Then when she clicked the save button, She got the message changes have been saved.
After that she got the express mail with ABAP/4 error message: SAPSQL_ARRAY_INSERT_DUPREC. All her changes were actually not saved and she has to dothe work again.
We already got the dump file in ST22 but we actually do not know how to check where the error occur. We also check if we could get a SAP note (formerly known as OSS) but were already implemented.
Please help me guys. Thank you.
BluetagHi,
The reason for this is duplicate records in a table, which SAP does not allow. Common reasons for this dump are:
1. Number range reset for the Sales Order number
2. User-exits causing multiple records of partners
Most common cause is incorrect coding in user-exits.
More analysis is possible only if you provide the programs where this error occurs, i.e. the lines similar to below:
"RAISE_EXCEPTION" " "
"SAPLCVV5" or "LCVV5U02"
"CVV5_EVENT_START_DISTRIBUTION"
Regards
Nikhilesh -
Error in Abap Application Program
I am getting following dump .
The current ABAP program SAPMSSY1 had to be terminated because it has come across a statement that unfortunately not executed.
Error analysis: An RFC call (Remote Function Call) was sent with the invalid user ID "JLIANG ". Or the calling system is not registered as trusted system in the target system.
It also saying The function module "SLIM_CONTROL_USMM" is called,
but cannot be found in the library.
above error I am getting how to correct the error.Hi,
Try to put this kind of questions in ABAP general forum for a prompt reply.
First check the Remote Connection using the Tcode SM59 and that the user is correct or not. The user must be existing in the Remote System.
For the second part of the program you need to check in the destination system whether the function module is existing or not. Also check whether the latest ABAP SP has been applied or not.
Hope this will help.
Thanks,
Samantak. -
Syntax error in ABAP HR program
Hello Experts,
I am new to programming in HR. I am getting a syntax error "PERNR is not defined for the current logical database" with the following piece of code.
TABLES: PERNR.
INFOTYPES: 0002, 0006.
GET PERNR.
PROVIDE * FROM P0002 BETWEEN PN-BEGDA AND PN-ENDDA.
WRITE: P0002-PERNR, P0002-NACHN, P0002-VORNA.
ENDPROVIDE.
Am I missing a statement or something needs to be configured in the system?
Any help will be highly appreciated.
thanks...
Rony.HI,
your code works perfectly well.. I have added the PNP logical database and selection screen 100... i think you r not added this PNP logical database
*& Report ZTESTPRG *
REPORT ZTESTPRG .
TABLES: PERNR.
INFOTYPES: 0002, 0006.
GET PERNR.
PROVIDE * FROM P0002 BETWEEN PN-BEGDA AND PN-ENDDA.
WRITE: P0002-PERNR, P0002-NACHN, P0002-VORNA.
ENDPROVIDE.
Thanks
mahesh -
Error when Generating the Program
Recently there was an SP upgrade and my Planning Book started giving me this error message (SCM version =5.0 and SP = 7)
"Error when generating the program" Message no. /SAPAPO/TSM141
Diagnosis: Generated programs are programs that are generated based on individual data objects, such as planning object structure, planning areas and Infocubes. These programs are then executed in the transaction. An error occured during the generation of such a program
Possible causes:
1. The template has been corrupted
2. The object that the template uses to generate the program contains inconsistencies; for instance an Infocube has not been activated
This error occurs when I try to open the my planning book/creating the selection profile. I've re-activated the Infocube and later deactivate and active my POS and tried to do the same for the Planning Area....but the error still persists. I tried to create a new planning area and tried it again but the error still persists. I've tried to fix any inconsistencies in the planning area time series objects by running the consistency check....however the same error pops up during the consistency check....
Anyone encountered this error message and any possible solutions to this issue.
Thanks
SurenderI did find an ABAP Dump when looking at ST22. The short message is as follows:
Runtime Errors GEN_BRANCHOFFSET_LIMIT_REACHED
Date and Time 05/14/2007 19:33:54
Short text
Jump distance is too large and cannot be generated.
What happened?
A jump distance is too large and cannot be generated.
A control structure or a routine with "CHECK" or "EXIT" contains
too many ABAP statements.
Error in the ABAP Application Program
The current ABAP program "GP_MET_PSTRU_BASIC_FORMS" had to be terminate
because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
During the generation of program "GP_MET_PSTRU_BASIC_FORMS", the system
determined that
within an ABAP event a control structure (for example, IF..ENDIF
or LOOP..ENDLOOP) or a routine (for example, FORM routine) has
become too large. The resulting jump distance is too large so that
it could no longer be generated.
With the internal load format, the jump distance must not be
greater than 32768 (this is the size of approximately 10.000
ABAP statements).
The jump distance that is to be generated, however, is 50885.
How to correct the error
The ABAP application program must be changed. -
Error when importing object "MC11VA0ITM_TAB".
Hi SDN,
Error in ABAP application program.
The current ABAP program "SAPLMCEX" had to be terminated because one of the statements could not be executed.
This is probably due to an error in the ABAP program. When attempting to import data, the structure of the complex object "MC11VA0ITM_TAB" was not compatible with thetarget object.
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_IMPORT_MISMATCH_ERROR',
was neither
caught nor passed along using a RAISING clause, in the procedure
"MCEX_BW_LO_API" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
When attempting to import data, the structure of the complex object
"MC11VA0ITM_TAB"
was not compatible with the target object. The error occurred with
component no. 522.
any inputs ...
Regards,Hello Shiva,
It sounds like there was a change made to the extract structure while there was still data in SM13 or RSA7 or the setup tables.
This situation is described in SAP note 328181.
The solution is usually to delete the data in the setup tables and reinitialise the datasource again.
Best Regards,
Vincent -
Re : select-options in abap objects
Dear friends,
I want to give select-options in abap-objects program. How to give that.
Thanking You
with regards,
ManiHI Mani,
It's common mix ABAP Procedural with ABAP Objects in the same program.
You should use the same way used in ABAP procedural program as Marco Cerdelli sad.
But inside ABAP OBJECTS classes you can't use is these statement type.
Don't forget to close this thread and all yours previous when your question be answered ! In case of doubt read the [rules of engagement|https://forums.sdn.sap.com/].
Best Regards.
Marcelo Ramos -
error analysis as in ST22 TRANSACTION:
AN EXCEPTION OCCURED THE EXCEPTION ASSIGNED TO CLASS CX_SY_CONVERSION_NO_NUMBER WAS NOT CAUGHT WHICH LED TO AN ERROR. THE REASON FOR THIS EXCEPTION IS :
THE PROGRAM TRIED TO INTERPRET VALUE ':4' AS NUMBER SINCE THE VALUE CONTRAVENES THE CORRECT NUMBER FORMAT THIS WAS NOT POSSIBLE.
ATTACHED IS MY PROGRAM
REPORT ZVXR0303
LINE-COUNT 60(3)
LINE-SIZE 132
MESSAGE-ID VN.
Tables: VBEP, VBAP, NAST.
DATA: BEGIN OF HEADER,
ORDER(15) VALUE 'ORDER',
LINE(5) VALUE 'LINE',
MATERIAL(14) VALUE 'MATERIAL',
DUE(15) VALUE 'DUE (MAD)',
CREATED(10) VALUE 'CREATED',
QTY(10) VALUE 'QUANTITY',
KEY(5) VALUE 'KEY',
TYPE(5) VALUE 'TYPE',
END OF HEADER.
DATA: Begin of IDAT OCCURS 0,
VBELN LIKE VBAP-VBELN,
POSNR LIKE VBAP-POSNR,
werks LIKE VBAP-WERKS,
cuobj LIKE vbap-CUOBJ,
MBDAT LIKE vbep-mbdat,
ERDAT LIKE VBAP-ERDAT,
MATNR LIKE VBAP-MATNR,
KWMENG LIKE VBAP-KWMENG,
QTY TYPE I,
END of IDAT.
class cl_abap_char_utilities definition load.
constants: tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB.
DATA: t_record(1000) TYPE C.
DATA: C_KWMENG(20) TYPE C.
data: OUTFILE(50) value '/usr/users/ftpsapfi/locks_540318'.
DATA: BEGIN OF TKOMCON OCCURS 50.
INCLUDE STRUCTURE CONF_OUT.
DATA: END OF TKOMCON.
DATA: iKEY TYPE I,
offset TYPE I,
KeyTypeLOC TYPE I,
KeyNumberLOC TYPE I,
type(15) TYPE C.
select-options: sVBELN FOR VBEP-VBELN obligatory,
sMAD FOR VBEP-MBDAT obligatory,
sERDAT FOR VBAP-ERDAT,
sMATNR FOR VBAP-MATNR,
sWERKS FOR VBAP-WERKS,
sKWMENG FOR VBAP-KWMENG.
SELECT
vbap~vbeln
vbap~POSNR
vbap~werks
vbap~cuobj
VBEP~MBDAT
VBAP~ERDAT
VBAP~MATNR
VBAP~KWMENG
INTO CORRESPONDING FIELDS of IDAT
FROM ( VBEP INNER JOIN VBAP ON vbepvbeln = vbapvbeln
AND vbepposnr = vbapposnr )
WHERE BMENG > 0
AND vbep~MBDAT IN sMAD
AND VBEP~VBELN in sVBELN
AND VBAP~werks IN sWERKS
AND VBAP~ERDAT IN sERDAT
AND VBAP~MATNR IN sMATNR
AND VBAP~KWMENG IN sKWMENG
AND VBAP~ABGRU = SPACE.
APPEND IDAT.
ENDSELECT.
PERFORM TOP-OF-PAGE.
if sy-batch = 'x'.
OPEN DATASET OUTFILE FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
TRANSFER t_record TO OUTFILE.
endif.
IF SY-SUBRC = 0.
LOOP at IDAT.
write IDAT-KWMENG DECIMALS 0 TO C_KWMENG.
REFRESH TKOMCON.
CALL FUNCTION 'VC_I_GET_CONFIGURATION'
EXPORTING
INSTANCE = idat-cuobj
LANGUAGE = NAST-SPRAS
TABLES
CONFIGURATION = TKOMCON
EXCEPTIONS
OTHERS = 4.
LOOP AT TKOMCON
WHERE ATNAM = 'S_SK_SPEC_KEY' OR ATNAM = 'S_MK_SPEC_KEY'
OR ATNAM = 'S_SK_CONSC_KEY' OR ATNAM = 'S_MK_CONSC_KEY'.
IF TKOMCON-ATNAM = 'S_SK_CONSC_KEY'
OR TKOMCON-ATNAM = 'S_MK_CONSC_KEY'.
KeyTYPELOC = 0.
keynumberloc = 2.
TRANSLATE TKOMCON-ATWRT+KeyNumberLOC(4) USING ': '.
IF TKOMCON-ATWRT+KeyNumberLOC(4) CO '0123456789 '.
iKey = TKOMCON-ATWRT+KeyNumberLOC(4).
IF ( TKOMCON-ATWRT+KeyTypeLOC(2) = 'FR' AND iKey >= 454 )
OR ( TKOMCON-ATWRT+KeyTypeLOC(2) = 'XF' AND iKey >= 1150 ).
PERFORM OUT-OF-RANGE-FOUND.
ENDIF.
ENDIF.
Else.
Offset = 0.
DO.
IF offset <= 9.
offset = offset + 1.
If TKOMCON-ATWRT+Offset(1) = ':'.
KeyTypeLOC = Offset + 1.
KeyNumberLOC = Offset + 3.
EXIT.
ENDIF.
ELSE.
EXIT.
ENDIF.
ENDDO.
TRANSLATE TKOMCON-ATWRT+KeyNumberLOC(4) USING ': '.
IF TKOMCON-ATWRT+KeyNumberLOC(4) CO '0123456789 '.
iKey = TKOMCON-ATWRT+KeyNumberLOC(4).
IF ( TKOMCON-ATWRT+KeyTypeLOC(2) = 'FR' AND iKey >= 454 )
OR ( TKOMCON-ATWRT+KeyTypeLOC(2) = 'XF' AND iKey >= 1150 ).
IDAT-KWMENG = TKOMCON-ATWRT(3).
PERFORM OUT-OF-RANGE-FOUND.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP.
ENDLOOP.
ENDIF.
CLOSE DATASET OUTFILE.
FORM OUT-OF-RANGE-FOUND *
FORM OUT-OF-RANGE-FOUND.
WRITE: / IDAT-VBELN.
WRITE: 10 IDAT-POSNR.
WRITE: 20 IDAT-MATNR.
WRITE: 35 IDAT-MBDAT.
WRITE: 50 IDAT-ERDAT.
WRITE: 65(3) IDAT-KWMENG DECIMALS 0.
WRITE: 75 TKOMCON-ATWRT+KeyTypeLOC(6).
IF TKOMCON-ATNAM = 'S_SK_CONSC_KEY'
OR TKOMCON-ATNAM = 'S_MK_CONSC_KEY'.
WRITE: 85 'Consecutive'.
ELSE.
WRITE: 85 'Specific'.
ENDIF.
IF TKOMCON-ATNAM = 'S_SK_CONSC_KEY'
OR TKOMCON-ATNAM = 'S_MK_CONSC_KEY'.
TYPE = 'Consecutive'.
ELSE.
TYPE = 'Specific'.
ENDIF.
* PREPARING A RECORD TO BE SENT TO FILE
CONCATENATE
IDAT-VBELN
IDAT-POSNR
IDAT-MATNR
IDAT-MBDAT
IDAT-ERDAT
C_KWMENG
TKOMCON-ATWRT+KeyTypeLOC(6)
TYPE
INTO t_record SEPARATED BY tab.
if sy-batch = 'x'.
TRANSFER t_record TO OUTFILE.
endif.
ENDFORM.
FORM TOP-OF-PAGE *
FORM TOP-OF-PAGE.
WRITE: / 'ORDER'.
WRITE: 10 'LINE'.
WRITE: 20 'MATERIAL'.
WRITE: 35 'DUE (MAD)'.
WRITE: 50 'CREATED'.
WRITE: 65 'QTY'.
WRITE: 75 'KEY'.
WRITE: 85 'TYPE'.
PREPARING A RECORD TO BE SENT TO FILE
CONCATENATE
header-ORDER
header-LINE
header-MATERIAL
header-DUE
header-CREATED
header-QTY
header-KEY
header-TYPE
INTO t_record SEPARATED BY tab.
ENDFORM.
THIS IS WORKING FINE WITH DIFFERENT RANGES BUT WHEN I USE RANGE
Sales Order 1250000 TO 2250000
MAD 01/18/2005 TO 03/02/2005
Material LOCK9250FR TO LOCK9250XF
PLANT 4500
IT GIVES THE RUNTIME ERROR I MENTIONED ABOVE
ANY HELP WOULD BE GREATLY APPRECIATED
THANKS.HI ROB YOUR REPLY LOOKS TO BE VERY CLOSE OTHER GUYS SAID IT MIGHT BE PROBLEM WITH VARIABLE C_KWMENG BUT I REMOVED THAT PIECE OF CODE WITH C_KWMENG BUT STILL I WAS GETTING THE ERROR ATTACHED IS THE COMPLETE ERROR DETAILS FROM ST22
Runtime Errors CONVT_NO_NUMBER
Exception CX_SY_CONVERSION_NO_NUMBER
Occurred on 09/29/2005 at 14:33:21
Unable to interpret "04:" as a number.
What happened?
Error in ABAP application program.
The current ABAP program "ZVXR0303" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An exception occurred. This exception will be dealt with in more detail
below. The exception, assigned to the class 'CX_SY_CONVERSION_NO_NUMBER', was
not caught, which
led to a runtime error. The reason for this exception is:
The program attempted to interpret the value "04:" as a number, but
since the value contravenes the rules for correct number formats,
this was not possible.
How to correct the error
Integers are represented in ABAP using a sequence of digits and, in some
cases, a preceding sign.
The system offers the following options for displaying floating point
numbers:
[mantissa]E[sign][exponent]
[whole number part].[fractional part]
e.g. -12E+34, +12E-34, 12E34, 12.34
If the error occurred in one of your own programs or in an SAP program
that you modified, try to correct it yourself.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"CONVT_NO_NUMBER" CX_SY_CONVERSION_NO_NUMBERC
"ZVXR0303" or "ZVXR0303"
"START-OF-SELECTION"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "620"
Application server....... "grrsap54"
Network address.......... "10.80.96.102"
Operating system......... "HP-UX"
Release.................. "B.11.11"
Hardware type............ "9000/800"
Character length......... 8 Bits
Pointer length........... 64 Bits
Work process number...... 3
Short dump setting....... "full"
Database server.......... "grrsap54"
Database type............ "ORACLE"
Database name............ "D01"
Database owner........... "SAPR3"
Character set............ "en_US.iso88591"
SAP kernel............... "640"
Created on............... "Aug 28 2005 20:25:49"
Created in............... "HP-UX B.11.00 A 9000/800"
Database version......... "OCI_920 "
Patch level.............. "88"
Patch text............... " "
Supported environment....
Database................. "ORACLE 8.1.7.., ORACLE 9.2.0.., ORACLE
10.1.0.."
SAP database version..... "640"
Operating system......... "HP-UX B.11"
User, transaction...
Client.............. 050
User................ "NSHAKER"
Language key........ "E"
Transaction......... "SE38 "
Program............. "ZVXR0303"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
The termination occurred in the ABAP program "ZVXR0303" in
"START-OF-SELECTION".
The main program was "ZVXR0303 ".
The termination occurred in line 156 of the source code of the (Include)
program "ZVXR0303"
of the source code of program "ZVXR0303" (when calling the editor 1560).
Source code extract
Caution: Program has changed
Caution: At time of termination, Active source code no longer available
001260 ? TRANSLATE TKOMCON-ATWRT+KeyNumberLOC(4) USING ': '.
001270 ? IF TKOMCON-ATWRT+KeyNumberLOC(4) CO '0123456789 '.
001280 ? iKey = TKOMCON-ATWRT+KeyNumberLOC(4).
001290 ?
001300 ? IF ( TKOMCON-ATWRT+KeyTypeLOC(2) = 'FR' AND iKey >= 454 )
001310 ? OR ( TKOMCON-ATWRT+KeyTypeLOC(2) = 'XF' AND iKey >= 1150 ).
001320 ? PERFORM OUT-OF-RANGE-FOUND.
001330 ? ENDIF.
001340 ? ENDIF.
001350 ? Else.
001360 ? Offset = 0.
001370 ? DO.
001380 ? IF offset <= 9.
001390 ? offset = offset + 1.
001400 ? If TKOMCON-ATWRT+Offset(1) = ':'.
001410 ? KeyTypeLOC = Offset + 1.
001420 ? KeyNumberLOC = Offset + 3.
001430 ? EXIT.
001440 ? ENDIF.
001450 ? ELSE.
001460 ? EXIT.
001470 ? ENDIF.
001480 ? ENDDO.
001490 ?
001500 ? TRANSLATE TKOMCON-ATWRT+KeyNumberLOC(4) USING ': '.
001510 ?
001520 ? IF TKOMCON-ATWRT+KeyNumberLOC(4) CO '0123456789 '.
001530 ? iKey = TKOMCON-ATWRT+KeyNumberLOC(4).
001540 ? IF ( TKOMCON-ATWRT+KeyTypeLOC(2) = 'FR' AND iKey >= 454 )
001550 ? OR ( TKOMCON-ATWRT+KeyTypeLOC(2) = 'XF' AND iKey >= 1150 ).
? IDAT-KWMENG = TKOMCON-ATWRT(3).
001570 ? PERFORM OUT-OF-RANGE-FOUND.
001580 ? ENDIF.
001590 ? ENDIF.
001600 ? ENDIF.
001610 ? ENDLOOP.
001620 ? ENDLOOP.
001630 ? ENDIF.
001640 ? CLOSE DATASET OUTFILE.
001650 ?
001660 ? *----
001670 ? * FORM OUT-OF-RANGE-FOUND *
001680 ? *----
001690 ? * ........ *
001700 ? *----
001710 ? FORM OUT-OF-RANGE-FOUND.
001720 ?
001730 ? WRITE: / IDAT-VBELN.
001740 ? WRITE: 10 IDAT-POSNR.
001750 ? WRITE: 20 IDAT-MATNR.
Contents of system fields
SY field contents..................... SY field contents.....................
SY-SUBRC 0 SY-INDEX 44
SY-TABIX 7 SY-DBCNT 1
SY-FDPOS 4 SY-LSIND 0
SY-PAGNO 2 SY-LINNO 18
SY-COLNO 94 SY-PFKEY
SY-UCOMM SY-TITLE Out of Range Keys
SY-MSGTY I SY-MSGID SF
SY-MSGNO 616 SY-MSGV1
SY-MSGV2 SY-MSGV3
SY-MSGV4
Active calls / events
No.... Type........ Name..........................
Program
Include Line
Class
1 EVENT START-OF-SELECTION
ZVXR0303
ZVXR0303 156
Chosen variables
1 EVENT START-OF-SELECTION
ZVXR0303
ZVXR0303 156
%_SPACE
2
0
SY-REPID ZVXR0303
5555333322222222222222222222222222222222
A682030300000000000000000000000000000000
TKOMCON-ATWRT 04:XF1260
333543333222222222222222222222
04A861260000000000000000000000
KEYNUMBERLOC 5
0000
0005
SYST-REPID ZVXR0303
5555333322222222222222222222222222222222
A682030300000000000000000000000000000000
SY-LDBPG SAPDB__S
5454455522222222222222222222222222222222
31042FF300000000000000000000000000000000
IKEY 1260
000E
004C
KEYTYPELOC 3
0000
0003
SY ###,####################################
0002000000000001000000000000000000000000
000C00020007000E00000001000A000000000000
... + 40 ###########^###<########################
0000000000050003000100080000000000000009
00010004000E000C000200040000000000000000
... + 80 ########################################
0000000000000000000000000000000000000000
0000000000000000000A00000000000000000000
... + 120 #######################################_
0000000000000000000000000000000000010005
00000000000000000000000000000000000A000F
... + 160 ############ÿÿ¹°XC############# E2 X1
000000000000FFBB540000000000000222432253
0000000A0000FF90830040000C0000C000520081
... + 200 000 ####__S 050
3332222222220000555222222222222222223332
0000000000000000FF3000000000000000000500
... + 240 00
222223322222222
000000000000000
SVBELN IBT00012500000002250000
44533333333333333333333
92400012500000002250000
IDAT-KWMENG ########
00000000
0000000C
TKOMCON-ATWRT+0(3) 04:
333
04A
SYST ###,####################################
0002000000000001000000000000000000000000
000C00020007000E00000001000A000000000000
... + 40 ###########^###<########################
0000000000050003000100080000000000000009
00010004000E000C000200040000000000000000
... + 80 ########################################
0000000000000000000000000000000000000000
0000000000000000000A00000000000000000000
... + 120 #######################################_
0000000000000000000000000000000000010005
00000000000000000000000000000000000A000F
... + 160 ############ÿÿ¹°XC############# E2 X1
000000000000FFBB540000000000000222432253
0000000A0000FF90830040000C0000C000520081
... + 200 000 ####__S 050
3332222222220000555222222222222222223332
0000000000000000FF3000000000000000000500
... + 240 00
222223322222222
000000000000000
OUTFILE /usr/users/ftpsapfi/locks_540318
2777277677267776766266667533333322222222
F532F53523F64031069FCF3B3F54031800000000
... + 40
2222222222
0000000000
Application Calls
No dump information available
Application Information
No dump information available
Internal notes
The termination occurred in the function "ab_Move" of the SAP
Basis System, specifically in line 529 of the module
"//bas/640_REL/src/krn/runt/abmove1.c#6".
The internal operation just processed is "MOVE".
The internal session was started at 20050929142552.
Active calls in SAP kernel
( 0) 0x4000000001751924 CTrcStack2 + 0x2bc dw.sapD01_DVEBMGS00
( 1) 0x4000000001751658 CTrcStack + 0x18 dw.sapD01_DVEBMGS00
( 2) 0x4000000001db7478 rabax_CStackSave__Fv + 0x100 dw.sapD01_DVEBMGS00
( 3) 0x4000000001dc3abc ab_rabax + 0x1e1c dw.sapD01_DVEBMGS00
( 4) 0x4000000001b44cb4 ab_cnverr__FiPcPCvN21T2 + 0x18c dw.sapD01_DVEBMGS00
( 5) 0x40000000016c96f8 ab_Move + 0x1910 dw.sapD01_DVEBMGS00
( 6) 0x40000000016d4434 ab_jmove__Fv + 0x384 dw.sapD01_DVEBMGS00
( 7) 0x4000000001022348 ab_extri__Fv + 0x17a0 dw.sapD01_DVEBMGS00
( 8) 0x4000000001726dc8 ab_xevent__FPCc + 0x38 dw.sapD01_DVEBMGS00
( 9) 0x40000000019f7efc ab_trigg__Fv + 0x94 dw.sapD01_DVEBMGS00
(10) 0x40000000019dc9ec ab_run + 0xc4 dw.sapD01_DVEBMGS00
(11) 0x4000000000f65e0c N_ab_run + 0x14 dw.sapD01_DVEBMGS00
(12) 0x4000000000f5fa88 dynpmcal + 0x198 dw.sapD01_DVEBMGS00
(13) 0x4000000000f5d500 dynppai0 + 0x830 dw.sapD01_DVEBMGS00
(14) 0x4000000000f5b8b4 dynprctl + 0x43c dw.sapD01_DVEBMGS00
(15) 0x4000000000f56728 dynpen00 + 0x2118 dw.sapD01_DVEBMGS00
(16) 0x400000000102f1b4 Thdynpen00 + 0x69c dw.sapD01_DVEBMGS00
(17) 0x400000000102e1e4 TskhLoop + 0x523c dw.sapD01_DVEBMGS00
(18) 0x4000000001022f50 tskhstart + 0x1e0 dw.sapD01_DVEBMGS00
(19) 0x4000000000dce3c4 DpMain + 0x484 dw.sapD01_DVEBMGS00
(20) 0x40000000022784cc nlsui_main + 0x14 dw.sapD01_DVEBMGS00
(21) 0x4000000000a39534 main + 0x14 dw.sapD01_DVEBMGS00
(22) 0xc00000000000a588 $START$ + 0xa0 /usr/lib/pa20_64/dld.sl
List of ABAP programs affected
Type Program Gen. Date Time Load Size
Prg ZVXR0303 09/29/2005 14:25:42 39936
Prg SAPMSSY0 05/01/2005 00:21:19 66560
Prg SAPMSSYD 06/05/2002 17:09:33 16384
Prg SAPFSYSCALLS 02/14/2002 14:22:47 6144
Prg RSDBRUNT 06/13/2004 00:43:20 226304
Typ RSSCR / / : m:15 5120
Prg RSDBSPBL 01/07/2003 18:47:02 59392
Prg SAPDB__S 02/14/2002 14:22:47 15360
Typ VARID 05/12/1997 16:51:30 4096
Prg %_CSYDB0 02/14/2002 14:22:46 28672
Prg RSDBSPVA 09/06/2005 22:54:22 112640
Prg SAPLSVAR 09/06/2005 22:57:28 625664
Typ VARIS 05/12/1997 15:27:21 2048
Typ RSVAMEMKEY 05/07/1997 13:07:49 2048
Prg RSDBSPMC 06/05/2002 17:09:26 66560
Typ DDSHDESCR 09/03/1997 03:05:16 3072
Typ SPPARAMS 05/07/1997 13:10:38 2048
Typ SPPARAMS 05/07/1997 13:10:38 2048
Typ RSSELINT 04/04/1995 16:12:37 2048
Prg SAPLICON 03/12/2004 06:57:52 23552
Prg %_CICON 02/14/2002 14:22:46 65536
Prg SAPLSABE 02/14/2002 14:22:47 11264
Prg SAPLSECU 05/23/2005 14:04:05 64512
Typ RSSUBINFO 10/14/1999 22:01:03 3072
Prg %_CRSDS 02/14/2002 14:22:46 8192
Typ RSDSEXPR 08/20/1998 10:57:18 2048
Prg SAPLDSYA 02/14/2002 14:22:47 39936
Prg SAPFSDS1 01/07/2003 18:32:17 47104
Typ TDCLD 11/02/1998 09:51:35 5120
Prg SAPLSDOD 04/30/2005 22:53:50 39936
Typ DOKIL 05/12/1997 16:46:17 3072
Prg SAPCNVE 02/14/2002 14:22:47 6144
Prg SAPLLANG 02/14/2002 14:22:47 8192
Typ T002 02/14/1998 10:24:58 2048
Typ RSEXFCODE 08/13/1997 12:52:57 1024
Prg SAPFSPOR 03/13/2004 19:20:44 12288
Prg SAPLOMCV 05/01/2005 00:14:10 16384
Prg CL_EXITHANDLER================CP 06/13/2004 00:40:58 26624
Prg SAPLSEXV 09/06/2005 22:55:26 107520
Prg CL_BADI_FLT_DATA_TRANS_AND_DB=CP 05/01/2005 00:21:35 33792
Typ SXS_ATTR 08/20/2001 12:23:27 4096
Typ V_EXT_ACT 11/09/2000 14:27:05 2048
Typ SXC_EXIT 11/09/2000 14:23:43 2048
Prg CL_EX_BADI_MATN1==============CP 05/01/2005 00:14:04 22528
Prg IF_EX_BADI_MATN1==============IP 06/13/2004 00:48:55 4096
Typ TMCNV 02/24/1999 03:33:25 3072
Prg SAPLSCNT 02/14/2002 14:22:47 24576
Typ DYCBOX 08/20/1998 11:16:53 2048
Prg SAPLSVSM 01/07/2003 18:35:45 22528
Prg SAPLSGUI 01/09/2003 17:15:12 31744
Prg SAPLSTTM 05/01/2005 00:24:04 75776
Prg SAPLSBDC 05/23/2005 14:05:19 38912
Prg CL_DATAPROVIDER===============CP 02/14/2002 14:22:46 40960
Prg %_CCNTL 02/14/2002 14:22:46 13312
Typ OBJ_RECORD 02/14/1998 08:30:43 2048
Prg SAPLSTUP 05/23/2005 14:03:46 65536
Prg SAPLCNDP 05/23/2005 14:05:47 167936
Prg SAPFGUICNTL 01/09/2003 17:18:52 20480
Prg SAPLOLEA 05/23/2005 14:03:56 79872
Prg SAPLSFES 09/06/2005 22:53:55 191488
Prg SAPLSPLUGIN 02/14/2002 14:22:48 6144
Typ ARFCRDATA 11/09/2000 14:04:16 6144
Prg SAPLGRFC 02/14/2002 14:22:47 13312
Typ SWCBCONT 11/15/2000 17:55:11 3072
Typ OLE_VERBS 04/04/1995 16:02:20 2048
Typ OLE_PA 04/04/1995 16:02:19 2048
Prg SAPSHDTV 03/12/2004 06:40:27 28672
Typ SSCRTEXTS 09/03/1997 03:12:33 3072
Typ SSCRFIELDS 05/13/1997 12:54:26 4096
Prg CL_GUI_PROPS_CONSUMER=========CP 01/07/2003 18:26:56 26624
Prg SAPLTHFB 09/06/2005 22:52:48 306176
Prg CL_DYNAMIC_GUI_EXTENSIONS=====CP 02/14/2002 14:22:46 33792
Prg CL_GUI_DATAMANAGER============CP 05/01/2005 00:20:36 70656
Prg CL_ABAP_CHAR_UTILITIES========CP 05/01/2005 00:14:49 11264
Prg RSDBSPVD 05/01/2005 00:15:44 73728
Typ RVARI 03/30/1998 09:40:50 4096
Typ RSVARIVDAT 04/04/1995 16:12:54 2048
Typ VBEP 01/27/2003 16:50:17 10240
Typ VBAP 09/15/2005 11:15:36 44032
Prg SAPLCEI0 09/22/2005 14:34:40 936960
Typ API_VALUE 02/20/1998 08:46:47 2048
Prg SAPLCUEV 06/07/2001 18:26:56 10240
Prg SAPLSUNI 06/13/2004 00:42:30 131072
Typ TFDIR 07/29/1998 19:49:08 3072
Prg %_CIBCO2 03/13/2004 14:32:13 12288
Typ IBINCOM 06/01/1999 11:56:27 3072
Typ IBINCONF 06/01/1999 11:56:27 2048
Typ IBSTCONF 06/01/1999 11:56:28 1024
Prg SAPLCUCB 05/23/2005 15:20:17 192512
Typ TCUIBSPECIAL 06/07/2001 17:50:37 1024
Prg %_CIBXX 03/13/2004 14:38:45 49152
Typ BAL_S_MSG 12/04/2000 13:04:01 6144
Prg CX_CBASE_ERROR================CP 01/27/2003 16:58:10 10240
Typ SCX_SRCPOS 11/09/2000 14:12:15 2048
Typ BAL_S_CONT 11/02/1998 09:43:07 2048
Typ BAL_S_PARM 12/04/2000 12:45:14 3072
Typ BAL_S_CLBK 11/02/1998 09:43:07 2048
Prg CX_STATIC_CHECK===============CP 02/14/2002 14:22:47 8192
Prg CX_ROOT=======================CP 02/14/2002 14:22:47 9216
Prg CL_CBASE======================CP 05/23/2005 15:19:44 87040
Typ T371G 04/29/1998 10:42:48 2048
Prg SAPLIBCO 03/13/2004 15:32:40 269312
Prg %_CIBCO 03/13/2004 14:38:45 11264
Prg SAPLIBXX 03/13/2004 14:38:46 11264
Prg SAPLIBIBF 03/13/2004 14:38:46 179200
Prg %_CIBIB 03/13/2004 14:38:45 18432
Prg SAPLIBINF 06/12/2004 22:20:22 415744
Prg %_CIBIN 03/13/2004 15:32:40 48128
Prg CL_IBASE_STRUC================CP 06/07/2001 19:59:10 106496
Prg %_CIBST 03/13/2004 14:38:45 37888
Prg CL_IBASE_STRUC_BUF============CP 06/07/2001 19:59:10 89088
Prg CL_IBASE_STRUC_STAT===========CP 06/07/2001 19:59:10 8192
Prg CL_IBASE_STRUC_BUF_IBSTREF====CP 06/07/2001 19:59:10 35840
Prg %_CIBCO1 03/13/2004 14:38:45 14336
Typ IBINVAL 09/18/2001 10:02:52 2048
Prg SAPLIBCU 03/13/2004 14:38:46 12288
Prg SAPLIBCUT 06/07/2001 18:27:19 12288
Typ T371B 05/14/1998 22:58:43 2048
Typ V_IBINR 03/13/2004 15:32:40 5120
Typ V_IBINR_CM 03/13/2004 15:32:40 5120
Prg CL_IBASE_SERVICE==============CP 06/07/2001 19:59:10 13312
Prg CL_IBASE_T371D_BUF============CP 06/07/2001 19:59:10 12288
Typ T371D 08/27/1999 18:19:44 2048
Prg CL_IBASE_R3_MATERIAL==========CP 05/23/2005 15:08:24 59392
Typ MARA 05/23/2005 15:08:18 22528
Typ MAKT 08/28/1997 08:52:19 2048
Typ ICON 01/03/1996 15:34:02 3072
Prg CL_ABAP_TYPEDESCR=============CP 05/01/2005 00:20:10 21504
Prg CL_ABAP_ELEMDESCR=============CP 05/01/2005 00:20:33 20480
Prg CL_ABAP_DATADESCR=============CP 03/12/2004 07:16:33 14336
Prg CL_ABAP_REFDESCR==============CP 03/12/2004 07:17:23 16384
Prg CL_ABAP_STRUCTDESCR===========CP 05/01/2005 00:20:33 20480
Prg CL_ABAP_COMPLEXDESCR==========CP 03/12/2004 07:16:33 13312
Prg CL_ABAP_TABLEDESCR============CP 03/12/2004 07:17:23 17408
Prg CL_ABAP_CLASSDESCR============CP 03/12/2004 07:17:23 23552
Prg CL_ABAP_OBJECTDESCR===========CP 03/12/2004 07:17:23 25600
Prg CL_ABAP_INTFDESCR=============CP 03/12/2004 07:16:33 19456
Prg CL_ABAP_SOFT_REFERENCE========CP 03/29/2001 16:42:12 7168
Prg CL_ABAP_REFERENCE=============CP 02/14/2002 14:22:46 6144
Prg IF_EX_CM_BADI_VERSION=========IP 01/07/2002 16:09:04 3072
Prg %_CABAP 01/07/2003 18:31:23 23552
Typ SXS_INTER 11/30/1998 15:55:16 2048
Prg CL_EX_CM_BADI_VERSION=========CP 05/01/2005 00:14:04 13312
Prg %_CSXRT 06/13/2004 00:40:55 11264
Prg CL_EXIT_MASTER================CP 06/13/2004 00:40:58 13312
Typ V_EXT_IMP 11/09/2000 14:27:05 2048
Typ V_EXT_IMP 11/09/2000 14:27:05 2048
Typ SXC_IMPSWH 11/09/2000 14:23:44 2048
Prg CL_IM_CM_BADI_VERSION_DEF=====CP 04/17/2002 11:01:00 6144
Prg SAPLASTAT_TRIG 02/14/2002 14:22:47 11264
Typ ASTAT_TYP2 11/10/1998 05:35:18 2048
Prg IF_CM_BASELINE================IP 05/23/2005 15:08:24 9216
Prg IF_IBASE_IBOF_TREE_OBJECT=====IP 05/23/2005 15:08:24 5120
Prg IF_IBASE_INSTALL==============IP 06/07/2001 20:08:54 4096
Prg IF_IBASE_MATERIAL=============IP 06/07/2001 20:08:54 3072
Prg IF_IBASE_OBJECT===============IP 06/07/2001 20:08:54 4096
Prg SAPLBOMA 02/14/2002 14:15:40 10240
Typ IONRA 03/12/2004 02:09:40 23552
Typ IBIBCOM 08/30/2001 17:56:57 4096
Typ IBIB 03/13/2004 14:32:13 5120
Prg CL_IBASE_STRUC_SERVICE========CP 06/07/2001 19:59:10 17408
Prg CL_CU_CBASE_ENQUEUE_CORE======CP 06/07/2001 19:58:59 11264
Prg CL_CU_CBASE_ENQUEUE===========CP 06/07/2001 19:58:59 16384
Typ T371F 06/01/1999 12:00:49 2048
Typ V_IBIN_SYVAL 03/13/2004 15:32:41 4096
Typ IBIN 09/18/2001 10:02:52 6144
Typ IBINOWN 02/01/2000 14:56:07 2048
Prg CL_IBASE_T371F_BUF============CP 06/07/2001 19:59:11 8192
Prg CL_IBASE_STRUC_FILT_02========CP 06/07/2001 19:59:10 11264
Prg CL_IBASE_STRUC_FILT===========CP 06/07/2001 19:59:10 10240
Typ IBST 09/18/2001 10:02:52 4096
Typ IBST 09/18/2001 10:02:52 4096
Typ IBSTREF 04/15/1998 00:20:43 2048
Typ IBSTREF 04/15/1998 00:20:43 2048
Prg IF_CBASE_E====================IP 06/07/2001 20:08:25 3072
Prg %_CCXTAB 02/14/2002 14:22:46 6144
Prg SAPLCUCQ 09/15/2005 11:15:38 79872
Typ CUCO 09/18/2001 10:02:34 18432
Typ CUCO_OBJ 09/18/2001 10:02:34 18432
Prg SAPLCLCA 09/06/2005 23:33:29 68608
Typ TCLA 03/13/2004 14:10:20 5120
Typ TCLAO 08/13/1997 13:57:22 4096
Prg SAPLCUOB 05/23/2005 14:31:35 31744
Typ INOB 09/03/1997 03:20:02 4096
Prg SAPLCLSE 05/23/2005 14:32:26 167936
Prg %_CCC01 05/01/2005 00:34:57 53248
Typ TABLEKEY 07/06/1998 21:01:06 2048
Typ KSSK 09/18/2001 10:02:58 3072
Prg SAPLCLEF -
Major global classes used in abap objects
Hi,
I am new to the abap objects and till now i am to understand that the role of the global classes are important in the abap object program. I had tried to search on the net but i was not able to get the desired result.
I want to know which are the major global classes which are used in the ABAP objects.
Plzz provide me guidelines for it.Ricx,
It depends on your requirement.
For alv's we use these global classes. For Webdynpro related alv we use different global classes.
CL_GUI_ALV_GRID (List Viewer)
CL_GUI_ALV_GRID_BASE (Basis Class for ALV grid)
CL_GUI_ALV_TREE (ALV Tree Control)
CL_GUI_ALV_TREE_SIMPLE (Simple ALV Tree)
CL_ALV_TABLE_CREATE (Dynamic Creation of ALV Data Table)
CL_ALV_TREE_BASE (Basis Class ALV Tree Control)
CL_CK_ALVTREE_NKEY_2_OBJECT (Converter Node Key Object)
CL_ALV_EVENT_DATA (Changing Data Container for Events)
CL_ALV_EVENT_TOOLBAR_SET (ALV Context menu)
Regards,
Arun.
Maybe you are looking for
-
all of the sudden my itunes want open on my pc, i don't even know what os it is. windows 95, and i've never had a problem before. just all of the sudden it want come on
-
I am about to create a slideshow for my daughters wedding and I would like to be able to have three sections of photos (her, him, and both) in this show as well I would like to have one soundtrack that has parts of three songs - matching up with each
-
Is there an update to iOS 6? I've been having several technical issues since the upgrade. Uncontrolled zoom of the entire screen, Siri taking 25 seconds to respond and not recognizing names, locking up of the phone. All requiring a reset.
-
Screen resolution option only 800x600
I have a G5 Dual 2.3 and an Acer 1917A monitor. I used this monitor with no issue on a G4 Dual. Plugged it into the "new" G5 and the only screen resolution option I have is 800x600 (not high enough). I have not installed any software from acer (can't
-
I am trying to create a simple applet and am having trouble getting it to work with the MS VM. I tried creating a simple applet that doesn't do anything but that doesn't work either. I am getting the following error in the console: Error loading clas