Error in accessing application on windows 2003 server

error on accessing the application on windows 2003 server R12
500 Internal Server Error
Servlet error: An exception occurred. The current application deployment descriptors do not allow for including it in this response. Please consult the application log for details.
First time i login sucessfully but now its not working.

Hi Mushy;
500 Internal Server Error
Servlet error: An exception occurred. The current application deployment descriptors do not allow for including it in this response. Please consult the application log for details.First try to run autoconfig and retest issue. If you have still same error check log file for more details
Also check:
500 Internal Server Error Servlet error:
500 Internal Server Error Servlet error:
R12 Startup Issue
Regard
Helios

Similar Messages

Error Installing patch 6272725 on Windows 2003 server

Hi all,
I am trying to install the RUP3 patch on Windows 2003 server. I am getting the following error when installing patch 6272715 which is required to be installed before installing patch 6141000. If i continue installing patch 6141000 after ignoring this error, i get same error during installation of patch 6141000. Please can any one suggest me what i should do to get rid this error.
AD utilities can support a maximum of 999 workers. Your
current database configuration supports a maximum of 83 workers.
Oracle recommends that you use between 2 and 4 workers.
Enter the number of parallel workers [2] :
AutoPatch will run in parallel mode.
Did not need to apply new applterr.txt.
Applying new applprod.txt (if any)...
Did not need to apply new applprod.txt.
Performing version checking for driver files...
Log and Info File sync point:
Mon Nov 26 2007 12:33:27
AutoPatch found some files which it will not apply.
These files are listed in the AutoPatch informational message file.
Copying driver files into installation area...
No driver files were selected for copying.
Skipping...
ForceCopy driver files into installation area for Specified driver
since no such action is present for this driver file
Screening out files not valid for this installation...
Determining valid on-site files...
Extracting object modules from product libraries...
setEnvAdrelink: Error: Cannot open registry key:
SOFTWARE\ORACLE
aiosp2() Error: failure in usdspn()
Contents of error buffer are:
"usdsop cannot create a new process
Cause: usdsop encountered an error creating a new process. [Reason].
Action: Check that your system had enough resources to start a new process. Cont
act your system administrator to obtain more resou (RE"
An error occurred while extracting files from library.
Continue as if it were successful [No] :
--- Thank You.

Sir,
I am posting the output as told by you.
G:\>which ls
ls: Command not found.
G:\>c:
C:\>ls
'ls' is not recognized as an internal or external command,
operable program or batch file.
C:\>cd e:\cygwin\bin
C:\>e:
E:\cygwin\bin>which ls
ls: Command not found.
E:\cygwin\bin>
I am also posting the output of adadmin utility in which i tried ti relink FND programs
Enter list of products to link ('all' for all products) [all] :
Generate specific executables for each selected product [No] ?
AD Administration can relink your Oracle Applications programs with debug
information. Oracle recommends that you do not relink your programs
with debug information unless asked to do so by Oracle Support Services.
Relink with debug information [No] ?
Relinking selected modules in Application Object Library.
setEnvAdrelink: Error: Cannot open registry key:
SOFTWARE\ORACLE
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 33: a
wk: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 203:
tr: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 534:
cat: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 538:
tr: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 538:
tr: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 538:
tr: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 548:
awk: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 573:
cat: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 575:
rm: command not found
Usage: adrelink force=y [<optional args>] <targets>
or: adrelink force=y [<optional args>] filelist=<file>
where <targets> = { <product module> [<product module>] ... }
and <product module> = "<product> <module name>"
- <product> should be in lower case
- <module name> should exactly match the executable name
Valid <optional args> are:
envfile=adsetenv.sh
Used only by the 'adsetup' script
link_debug=y
Will we link executables with debug or not? Default is 'n'
backup_mode=none
Which executables will we back up when linking with force=y?
Default is 'file'. Meanings are:
- none: do not back up any executables
- all : back up all executables
- file: do what $APPL_TOP/admin/adlinkbk.txt says to do
Type 'adrelink examples' to see some examples of running adrelink.
An error occurred while relinking application programs.
Continue as if it were successful [No] :
It is clear that there is some problem with Cygwin. I have renamed the following executabes after the cygwin installation.
gcc to cc
egrep to grep
gawk to awk
gnumake to make
i have also copied which.exe to "Windows\system32" directory from "cygwin\bin" folder and
Copy LINK.exe to "Windows\system32" directory from "VC98" directory.
Please tell me if there is something wrong with Cygwin installation.

[b]Error in installation database in Windows 2003 server[/b]

Hi, I have a problem. I am trying to install a database Oracle Enterprise Edition 10.1.0.2.0 in a machine that has Windows 2003 Server. On having finished the installation and begin the Database Configuration Assistant appears the error ora-12546 TNS permission denied. In the file listener.log
the following messages appear:
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12546: TNS:permission denied
TNS-12560: TNS:protocol adapter error
TNS-00516: Permission denied
32-bit Windows Error: 5: Input/output error
In the alert.log appear:
OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified O/S-Error: (OS 1) Incorrect function. !
I install in local mode, not remote and using Administrator user.
Help me, please!
Regards
Carlos

Hello,
There is a note in SAP that indicates that EMT64/x64 is not compatible with Oracle 9.2 (nota 12546) There is Oracle's FAQ that indicates Oracle's versions and Windows that he(she) supports EMT64.
http://www.oracle.com/technology/tech/windows/faq.html#x86-64
Since you can see it(he,she) indicates that Oracle 9.2 is supported in Windows 32 bits with technology EMT64
And that alone the version 10g 2 be reread it(he,she) is compatible with Windows 2003 SEVER 64 bits with technology EMT64
I hope that this costs(suits) us to solve our problems
A greeting

Error in installation database in Windows 2003 server 64 bits

Hi, I have a problem. I am trying to install a database Oracle Enterprise Edition 9.2.6 in a machine that has Windows 2003 Server 64 bits
. On having finished the installation and begin the Database Configuration Assistant appears the error ora-12546 TNS permission denied. In the file listener.log
the following messages appear:
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12546: TNS:permission denied
TNS-12560: TNS:protocol adapter error
TNS-00516: Permission denied
32-bit Windows Error: 5: Input/output error
I see the note 722966 and my procesador is EM64T
I install in local mode, not remote and using Administrator user.
Help me, please!

Hello,
There is a note in SAP that indicates that EMT64/x64 is not compatible with Oracle 9.2 (nota 12546) There is Oracle's FAQ that indicates Oracle's versions and Windows that he(she) supports EMT64.
http://www.oracle.com/technology/tech/windows/faq.html#x86-64
Since you can see it(he,she) indicates that Oracle 9.2 is supported in Windows 32 bits with technology EMT64
And that alone the version 10g 2 be reread it(he,she) is compatible with Windows 2003 SEVER 64 bits with technology EMT64
I hope that this costs(suits) us to solve our problems
A greeting

Mac OS X help with share access on a windows 2003 server

Hello everyone
I am not too familiar with Mac OS X (Darwin) and so on and need a little help.
We recently got a new windows 2003 standard server and I want to move my files to there so they get backed up and so on. I am able to access shares on the pc's on our network but when I try to access the server from finder i just get a box pop up saysing do you want to fix or delete the alias.
When I try to access it via a terminal, because I am a bit more ok with the cmd line thanks to my linux capabilities, I get the following error:
mount_smbfs: tree connect phase failed: syserr = Permission denied
when i try:
mount_smbfs //dan:[email protected]/General\ Files /BB-SERVER/General\ Files
Is there anybody that has experienced this before and that can help me resolve this.
Thank you in advance
Kobus

Hi Kobus Bensch,
I'm sorry I am not able to help with your questions about sharing from your Mac to the server but wanted to suggest that you post back the exact Mac OS version you are using. Your specs below your post suggest 10.0.x which was barely a beta version of Mac OS X. This will surely help those who are seeing your topic and trying to help.
To find the version you can simply click on the blue Apple in your top menu bar and select About This Mac.
good luck,
littleshoulders

Error=2 in jre1.6.0_07 when calling cmd /c -- Windows 2003 server 5.2

Must be very simple. Although, I do not where else to check.
A java application allows opening the OS shell and executing programs. For Windows
(without further details) a "cmd /c" prefix is recomended in the config file. None
for Linux.
The application runs the shell from a path relative to its configurations file,
for which I have defined "../scripts".
Thus a .wsf script located at MyAppPath\scripts can be executed as "Cscript //NoLogo MyScript.wsf". It works OK under XP Profesional, Version 2002, Service Pack3, jre1.6.0_07, JAVA_HOME defined. The application log reports a proper application start up using Java VM 10.0b-23. and execute the shell as many times as called without any problem.
The applications works also fine for every aspect on Windows 2003 server 5.2, except for calling the os Shell. The following error is displayed:
Cannot run program "cmd /c Cscript //NoLogo Myscript.wsf" (in directory C:\MyAppPath\script"): CreateProcess error=2 the system can not find the file specified.
Of course, the file "Myscript.wsf" is there...
In both cases (XP and 2003), CompSpec is set to %SystemRoot%\system32\cmd.exe and PATHEXT inlcudes ".WSF".
Any help will be most appreciated.

I have no experience with cscript, but by typing cscript in a command prompt i get:
Microsoft (R) Windows Script Host Version 5.7
Copyright (C) Microsoft Corporation. All rights reserved.
Usage: CScript scriptname.extension [option...] [arguments...]
Options:
//B         Batch mode: Suppresses script errors and prompts from displaying
//D         Enable Active Debugging
//E:engine Use engine for executing script
//H:CScript Changes the default script host to CScript.exe
//H:WScript Changes the default script host to WScript.exe (default)
//I         Interactive mode (default, opposite of //B)
//Job:xxxx Execute a WSF job
//Logo      Display logo (default)
//Nologo    Prevent logo display: No banner will be shown at execution time
//S         Save current command line options for this user
//T:nn      Time out in seconds: Maximum time a script is permitted to run
//X         Execute script in debugger
//U         Use Unicode for redirected I/O from the consoleDoesn't this mean that the script file name should come before the option (//Nologo)?
I run XP SP 3.

Clean Access and Windows 2003 Server

I am trying to install the Clean Access Client on a VM running Windows 2003 Server. When I connect to our customer's network the VPN client appears to connect properly and I see the Clean Access window. Then it all seems to fall over. My customer tells me I should see a blue window with a red OK button on it but I never see it. As a result I never get completely into the network. Is this because I am running this on Windows 2003 Server or should I be looking at something else? Can this run in a Virtual Environment and on 2003 Server?

I work it out partially by myself:
1)
(excuse me, I meant "kinit and Krb5LoginModule" not "kinit and kinit.exe").
Krb5LoginModule seems to work now (with TCP). The output is:
KRBError:sTime is Tue Jun 01 17:13:51 CEST 2004 1086102831000
suSec is 945761
error code is 52
error Message is Response too big for UDP, retry with TCP
realm is SSOTEST.RTC.CH
sname is krbtgt/SSOTEST.RTC.CH
KrbKdcReq send: kdc=rtcnt978.ssotest.rtc.ch TCP:88, timeout=30000, number of retries =3, #bytes=232
DEBUG: TCPClient reading 1496 bytes
KrbKdcReq send: #bytes read=1496
KrbKdcReq send: #bytes read=1496
EType: sun.security.krb5.internal.crypto.DesCbcMd5EType
KrbAsRep cons in KrbAsReq.getReply sso_testuserCommit Succeeded
Which is what I want (it tries first with UDP, then the KDC says the TGT is too big for UDP and the client tries again with TCP)
2)
I still have the error :-(

Dscc6 initialize error in windows 2003 server

I installed DS 6 in windows 2003 Server.
I do
1) dsccsetup.exe initialize
and I get this error
## Failed to run C:/JavaES5/share/cacao_2/bin/cacaoadm.bat list-modules -r
#### The system cannot find the path specified.
## Exit code is 1
When I open cacaoadm.bat file I see
an entry
#BASE#\\lib/private/perl\\bin\\perl -I #BASE#\\lib/private/perl\\site\\lib #BASE#/lib/tools/scripts/cacaoadm.pl %*
I am not sure what is that #BASE# variable and why was it not replaced at installation time or I don't know how and when it get replaced.
any help is highly appreciated.

It works now . I replaced the #BASE# with the actual path ie C:\JavaES5\share\cacao_2 , I also had to set the %PERL5LIB% variable to point to the perl directories that came with ds6 installation. cacaoadm.bat was using this variable to locate the perl scripts, which was poitning to a oracle installation which had different perl script version.
After doing all these I was able to run "dsccsetup initialize" so that completed my installation and configuration. But to my surprise when I accessed the java management console through https:\\localhost:6789
it asked me the user id and passwd, I gave mine as I was the administrator of the system , but it doesn't let me in.
I am really disappointed now that after reaching so far I can't access and manage the directory server through a console. Please help me...I am using Windows 2003 server. Please let me know what user id and passwd shd I use.

FRM-92102: A network error has occurred. on Windows 2003 Server

I had installed Oracle APPS R12 on Windows 2003 server. I use the same (System) as Server and Client. When trying to open the Forms I am thrown with below error:
FRM-92102: A network error has occurred.
The Forms Client has attempted to reestablish its connection to the Server 5
time(s) without success.
Please check the network connection and try again later.
I googled, searched this forum for solution. But these didnt work out. So please help me to get this fixed.

I had installed Oracle APPS R12 on Windows 2003 server. I use the same (System) as Server and Client. When trying to open the Forms I am thrown with below error:
FRM-92102: A network error has occurred.
The Forms Client has attempted to reestablish its connection to the Server 5
time(s) without success.
Please check the network connection and try again later.Please check the application.log file for details about the error.
Please see tjese docs.
R12: "FRM-92101: There Was a Failure in the Forms Server During Startup" Error When Loading Forms [ID 1103744.1]
Recommended Browsers for Oracle E-Business Suite Release 12 [ID 389422.1]
Thanks,
Hussein

QT failed to initialize error -2096 & Windows 2003 Server

I have seen several posting regarding this, but all are related to ITunes. I have Quicktime 7.4.1 installed on a WTS Server and when I try to run it I get the 2096 error. Since 7.4.1 addresses security issues, reverting to a previous version is not an option. Does anyone know how to get Quicktime 7.4.1 to run on WTS running on a Windows 2003 server? The only other option I will have is to remove Quicktime completely. It worked fine prior to version 7.4. Thanks

( I had the same prob. this worked for me..Good luck...)
1.Quit iTunes.
2. Windows XP and Windows 2000: On the Start menu, click My Computer (or double-click My Computer on the Desktop).
-Windows Vista: On the Start menu, click Computer.
4. In My Computer, open the C:\ drive (or whichever disk your Windows XP is installed on).
5. Open the Program Files folder.
6. Open the iTunes folder.
7. Right-click on the iTunes application (iTunes or iTunes.exe) and from the shortcut menu, click Properties.
8. Click the Compatibility tab.
9. Deselect the checkbox under Compatibility mode if it's selected.
10. Click OK.
11. Open iTunes and play a song.

Trying to access Windows 2003 Server share with Mac OS 9.04

Hi
I cannot connect to a Windows 2003 Server share on my 2003 domain. I can access the share with my MacBook (10.4.9) & my G4. I have File Services for Mac installed & can ping the server from all OS 9 Mac.
Can anyone give me some tips?
MacBook Administrator

How are you trying to connect to the server? Via AppleTalk or IP? (What utility are you using to ping the server from the Mac OS 9 machine?) Since you're not providing any information about error messages you're receiving or the symptoms of your problem I can only provide the following information.
If you're selecting the server from a list in the Chooser and clicking the OK button then the connection should switch to IP automatically. Make sure your Mac has TCP/IP enabled and is receiving an IP address or that you have an appropriate IP address hard-coded. You can try forcing an IP connection by entering the IP address or DNS name of the server in the Chooser rather than selecting it from the list in the Chooser.
Or you can try forcing an AppleTalk connection by selecting the server in the Chooser and holding down the Option key as you click the Connect button. If you're asked to enter your name and password then you're communicating properly with the server. This is, however, a very slow connection compared to IP.
Finally, be sure you update to the latest version of Mac OS 9, which is 9.2.2 <http://docs.info.apple.com/article.html?artnum=75288>.
Hope this helps! bill
1 GHz Powerbook G4 Mac OS X (10.4.9)

Windows 2003 server access getting slow from Windows7/8 client

We have Windows 2003 Enterprise Server. If I try to access through Windows 7 or Windows 8 client PC then I am getting very slow access. Slow access in terms of, if I am taking remote desktop of server [OR] if I directly browse server directory [OR] even
accessing any web application on server it is very slow.
But if I am accessing though any Windows-XP base client or even other servers having Windows 2003 or Windows 2008 then access in good.
But interesting thing is even we have other Windows 2003 server for which I am getting normal response.
Can someone guide me on the same? I am not able to understand the root cause of it.
-Abhay

Start with decreasing SMB version in clients. For inspiration look here
http://www.petri.co.il/how-to-disable-smb-2-on-windows-vista-or-server-2008.htm
Rgds
Milos

IDES 46E with windows 2003 server Installation errors..

Hi,
Can some body help me in IDES 46E with windows 2003 server Installation?.I'm tired of installing with this combination on my desktop my env as follows.
1.Windows 2003 Server
2.JDK.142
3.Oracle 9.0.2 with 7 patch
4.IDES 46E
Installed successfully Database and SAP but while exporting data in to tables then getting errors.
Thanks in advance..
Sreedhar

Hi GreetZ,
I opened the respective 3200,3300,and 3600 ports and I can access my router from outside home.I can also ping <IPAddress> and telnet<IPAddress> successfully.But I'm unable to telnet <IPAddress><space>3600 giving error..connection failed on port 3600 and same error for remaining ports too.Pls help me in fix this issue.
Thanks for your replies..
Sreedhar

Oracle 9i R1 application server With Windows 2003 server

Hi all,
I am Getting error (Web Forms can install only Windows NT/2000) When installing Oracle 9i R1 application server in Windows 2003 SP1.
is any specific setting or workarounds available to install in Windows 2003 Server?.
Abk

setup.exe -ignore sysprereqs this may work because it will detect that you dont have the appropiated OS, but it will ignore under your responsability and keep installing.
Also you may try to modify the oraparam.ini in the install folder, and add some lines for the Windows version that you have, but this is more difficult, because you should use the exact name of the Version in order to pass this check.
Regards.
Edited by: Roberto Barrera on Jan 22, 2009 10:02 AM

ORA-12546 error during installation of 9.2.0.1 on Windows 2003 Server

I have encountered an error whilst installing oracle 9.2.0.1 on a Windows 2003 Server. The error appears in the final part of the installation, when the Database Configuration Assistant is performing some work - it reaches the part where it creates the database instance - here we get the "ORA-12546: TNS Permission denied" error - this part of the installation is marked as failed - i can retry it as many times as i want but the same thing happens. If i finish the installation (even though the error has occurred) the oracle installation doesn't really work . I can't open the Database Configuration Assistant and don't really have a sysdba user. However all the services seem to be running fine (even the tns listener)
I was wondering whether it could be a problem that would be solved with the 9.2.0.3 patch - but this patch assumes that you have performed a proper working installation of 9.2.0.1, so I'm not quite convinced that the problem is related to the oracle version.
I've read other threads where the problem has been read/write privileges on some files and folders, but this shouldn't be an issue when I'm logged onto the machine as a local administrator.
The install.log files don't really provide any extra information.

I have exactly the same problem installing Oracle on a Windows Server 2003 X64 Enterprise Edition. I have Intel Xeon processors (EM64T).
I tried to install Oracle for 64 bits, but it didn't work. Now I'm trying to install 32 bits version of Oracle, and I get the same error and the same problem, mentioned above.
Can anyone help us, I can't figure out a way to solve it. I don't know if Oracle for 32 bits is not compatible with that version of Windows, even if it is supposed to be.
Thanks!!!!

Error in accessing application on windows 2003 server

Similar Messages

Maybe you are looking for