Error in accessing shared service

Hello All -
I have configured the foundation services for 11.1.2 & configuration shows that everything is completed.
I went to the services panel & started the services for
Hyperion Foundation Services - Managed Server
Oracle process manager
Hyperion RMI Registry
All the above services started without any problem.
Now i went to a internet explorer & was trying to access the shared service using the following URL http://servername:28080/interop/index.jsp & i get the following Error:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
*10.4.5 404 Not Found*
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
Do i need to do anything more after configuring the foundation service ?
Thanks!

Hi John-
Thanks for your reply. Not sure what was causing that error but I deleted the database, configured Foundation again with a new SQL user & now my shared services is up & running. On seeing some of the logs it appeared as there was
some error in JDBC connection.
Although i just have a quick question that once my shared services is up & running should i not be able to access workspace as well using work space URL or work space would not be available until & unless I configure the web server?
Thanks for your help :)

Similar Messages

Cannot Access Shared Services After Installing 11.1.2

Installed and successfully configured Hyperion Foundation. Validation tool is telling me configuration of foundation, workspace etc was successful. However when I try to access Shared Services at http://server:28080/interop I get a 404 error, and when I try to access http://server:19000/workspace I get the following error:
Initialization Error.
The system is not available due to initialization errors.
Detailed error messages:
Error initializing system registry: Could not find the Workspace Product node. Check Registry connection and content
Services I have running: Hyperion Foundation Services: Managed Server, Hyperion Integration Services, Hyperion RMI Registry, Oracle Process Manager (EPM_EPMSystem1), Oracle Process Manager (ohsInstance3483233323).

Reconfigured and it's working fine now. Closing the thread.

Error when trying to access Shared Services Console

When trying to access the Shared Services Console, I recieved an error message which indicated that an error had occured while performing this operation. http://localhost:28080/interop/jsp/config/defaultError.jsp. The error message from the diagnostics reports indicate that the error has to do with the SSO service error: java.net.ConnectException: Connection refused: connect.
I am installing EPM 11.1.1.2 Hyperion 9.5
Any ideas would be great.

Make sure the Shared Services from the Services have been started and the Database configured with the Shared Services is up.

Trying to run LCM getting error when selecting Shared Service application

Recently created a new planning app. Want to import some LCM artifacts into the app. When I click on the newly created app in Shared Services/Application folder I get this message.
'Unable to connect to '[new planning app]' ensure that the application is up and running and the user has the appropriate rights to access this feature'
If I use the same logon ID to go into Hyperion Planning I can view/edit the new planning app.
Search in Oracle/Middleware/user_projects for log files but nothing really stood out
JTS

Its its a new application:
1. check data source to make sure information provided is correct and if it stilll fails then check logs and share the error message.
2. Try creating a new application, the moment you get a message in planning that application created successfully you should have the application created in EAS.
Cheers..!!!

Why am I getting an error while accessing the service pop up when I try to convert a doc from pdf to a doc?

I keep getting a pop up of "error while trying to access the service" when I am trying to convert a pdf to a doc?

Hi snork8253,
Please let me know the exact workflow you are following when you get this error.
Are you trying to convert from within Reader or from Browser?
If from Reader then make sure you are signed in within Reader
Also try updating Reader to the latest v11.0.09 and check.
Regards,
Florence

Error while opening Shared Services console

Hi,
I have installed and configured HSS 931 (32bit) on win 2003 64bit successfully. App server is WebLogic92 MP3. IE version 6.0
When i try to launch Shared services console, login page opens with error : "Object doesn't support this method or property". And it stops.
Error:
Problem wit this web page might prevent from being displayed properly.....blah..blah...
Line: 76
Char: 2
Error: Object doesn't support this method or property
Code: 0
URL:http://localhost:58080/interop/index.jsp
*I tried running the HSS in foreground and launched the console. Login page loads without any errors. I can login into shared services successfully with default admin user id.
Its looks weird ..and cannot figure out why i cannot launch HSS console when it is running as service.
Has anyone experienced this issue?
Appreciate your response/help..
Thank you,

Hi epm,
why dont you share the version and which patvh you applied to resolve. This would be useful to others
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/

Error installation Essbase Shared Services

Hello,
I have installed Essbase .4 and i have created a database oracle 12c.
When i have configured the Essabase, i have an error about shared services :
"The database contains no information services shares"
But i have tried the connexion in my database and it's Ok.
Do you help me?
Congrats,
Clara

I have the same problem.
Having installed Essbase Server, I was taken directly to the Configuration tool. I have accepted all the defaults but encounter the message "Registration parameters cannot be validated successfully. Please check that the information entered is correct"
I have accepted the defaults. I have used the password 'password'.
Would appreciate help to get past this.
I did try the previous suggestion but do not see an option to exclude Workspace installation.
JOHN

Error while configuring Shared Services v11.1.1.3 with websphere

We are trying to configure webpshere v6.1 with shared services v11.1.1.3 but during configuration getting following error in configtool.log file
(Jul 15, 2010, 08:09:32 AM), com.hyperion.cis.config.ClusterSetupDialogConsoleImpl, DEBUG, Product Foundation belongs to editDefaultOnly group.
(Jul 15, 2010, 08:09:32 AM), com.hyperion.cis.config.ClusterSetupDialogConsoleImpl, DEBUG, Default cluster doesn't exist, set default port # to: 28080
(Jul 15, 2010, 08:09:32 AM), com.hyperion.cis.config.ClusterSetupDialogConsoleImpl, DEBUG, Print EditDefaultCluster option only.
(Jul 15, 2010, 08:09:39 AM), com.hyperion.cis.config.ClusterSetupDialogConsoleImpl, DEBUG, Select to edit Default cluster.
(Jul 15, 2010, 08:09:45 AM), com.hyperion.cis.config.ClusterSetupDialogConsoleImpl, DEBUG, Set system values for EditDefaultCluster, host=ga016a2b1 , port=28080
(Jul 15, 2010, 08:09:45 AM), com.hyperion.cis.config.ClusterSetupDialogConsoleImpl, DEBUG, user select to edit default cluster -- host and port is:
(Jul 15, 2010 8:09:48 AM), Install.product.install, com.installshield.wizard.console.ConsoleWizardUI, err, java.lang.NullPointerException
STACK_TRACE: 10
java.lang.NullPointerException
at java.io.File.<init>(File.java:220)
at com.hyperion.cis.config.wizard.WebSphereDeploymentPanel.checkWASPermissions(WebSphereDeploymentPanel.java:262)
at com.hyperion.cis.config.wizard.WebSphereDeploymentPanel.queryExit(WebSphereDeploymentPanel.java:69)
at com.installshield.wizard.console.ConsoleWizardUI.doNext(Unknown Source)
at com.installshield.wizard.console.ConsoleWizardUI$ConsoleNavigationController.displayOptions(Unknown Source)
at com.installshield.wizard.console.ConsoleWizardUI.currentBeanChanged(Unknown Source)
at com.installshield.wizard.StandardWizardListener.currentBeanChanged(Unknown Source)
at com.installshield.wizard.Wizard$RunThread.run(Wizard.java:1822)
(Jul 15, 2010 8:09:48 AM), Install.product.install, com.installshield.wizard.console.ConsoleWizardUI, err, could not display error message panel -- exiting wizard
Could anyone can help us on this issue? why did this issue occur during configuration. we are not sure what was missing.

Hi
I'm having the same error message , but I was able to configure my HSS
Anyway, If I have all my Hyperion services running then suddenlly I get the error and I can not work any more with HSS
Maybe there is a limit in my connections or process or session in the database
Have you resolve your problem?
Regards
Loreto

Installing Hyperion EPM error: Register with Shared Services

I cannot configure correctly my installation of Hyperion EPM 11.1.1. (I0m using Oracle AS 10.1.3 as application server)
If I try automatic deployment it fails in "Register with shared services" for all the services I'm trying to install.
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.oracle.cmc.registry.HITRegistryUtil.setProperties(HITRegistryUtil
.java:981)
at com.oracle.cmc.registry.HITRegistryUtil.setProperties(HITRegistryUtil
.java:1070)
at com.oracle.cmc.registry.HITRegistryUtil.setProperties(HITRegistryUtil
.java:1070)
at com.oracle.cmc.registry.HITRegistryUtil.setProperties(HITRegistryUtil
.java:1088)
at com.oracle.cmc.registry.HITRegistryUtil.setProperties(HITRegistryUtil
.java:1088)
at com.oracle.cmc.registry.HITRegistryUtil.loadHITRegistry(HITRegistryUt
il.java:692)
at com.hyperion.avalanche.AvalancheConfigurator.configureWorkspaceServic
es(AvalancheConfigurator.java:365)
at com.hyperion.avalanche.AvalancheConfigurator.configure(AvalancheConfi
gurator.java:159)
at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDbConfi
gTask(RunAllTasksWizardAction.java:658)
at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAll
TasksWizardAction.java:202)
at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source
Caused by: java.sql.SQLException: [Hyperion][Oracle JDBC Driver]Object has been
closed.
at hyperion.jdbc.base.BaseExceptions.createException(Unknown Source)
at hyperion.jdbc.base.BaseExceptions.getException(Unknown Source)
at hyperion.jdbc.base.BaseConnection.prepareStatement(Unknown Source)
at hyperion.jdbc.base.BaseConnection.prepareStatement(Unknown Source)
at com.oracle.cmc.registry.CMCPortalServiceDBHelper.generateServiceName(
CMCPortalServiceDBHelper.java:293)
at com.oracle.cmc.registry.HITRegistryUtil.generateAgentUuid(HITRegistry
Util.java:1329)
... 15 more
HYPERION_HOME: E:\Hyperion
HBR Configuration has not been initialized. Make sure you have logged in sucessfully and there are no exceptions in the HBR log file.
ConfigurationManager not available
If I Validate at the end of the configuration:
PASSED CFG: Configuration Check whether all configuration tasks have been completed 0 s
PASSED DB: Database Connection to database jdbc:hyperion:oracle://sinfo-vmn-05:1521;ServiceName=bilab 6 s
FAILED EXT: External Authentication Check Native Directory external authentication provider configuration
Error: Provider is not reachable
Recommended Action: Check Shared Services Configuration 69 s
FAILED OpenLDAP Connection to OpenLDAP
Error: sinfo-lab-hyp:28089
Recommended Action: Start open LDAP 1 s
FAILED SSO Availability of login http://sinfo-lab-hyp:19000/interop/index.jsp
Error: java.net.ConnectException: Connection refused: connect
Recommended Action: Start application 0 s
FAILED WEB: Web App Availability of web application context http://sinfo-lab-hyp:19000/interop/META-INF/manifest.mf
Error: Connection refused: connect
Recommended Action: Start application 1 s
Essbase / Essbase
FAILED CFG: Configuration Check whether all configuration tasks have been completed
Error: Next tasks are not configured:
hubRegistration: Configuration Failed
Recommended Action: Try to configure mentioned tasks 0 s
PASSED EAS: Essbase server Essbase Server startup on 0 s
PASSED EAS: Essbase server Essbase Server startup check using Maxl command 0 s
Essbase / Essbase Administration Services
FAILED CFG: Configuration Check whether all configuration tasks have been completed
Error: Next tasks are not configured:
hubRegistration: Configuration Failed
Recommended Action: Try to configure mentioned tasks 0 s
PASSED DB: Database Connection to database jdbc:hyperion:oracle://sinfo-vmn-05:1521;ServiceName=bilab 6 s
FAILED WEB: Web App Availability of web application context http://sinfo-lab-hyp:10080/eas/META-INF/manifest.mf
Error: Connection refused: connect
Recommended Action: Start application
I see that OpenLDAP is not configured. Is this a problem?
If I try with Embedded Java Container, Will I resolve my problem??

hi, this is a late reply.
I encountered the same problems as yours. I then read the releasenotes(for windows) of EPM and found this:
Could not start the Shared Services from Windows services.
solution: update Windows registry
1. locate the following item of windows registry:
HKEY_LOCAL_MACHINE\SOFTWARE\Hyperion
Solutions\FoundationServices0\HyS9FoundationServices
2. Under HyS9FoundationServices, add 1 to JVMOptionCount, and add a new JVMoption, whose value is set to be -DEPMRegistryUpdate=true。
3. restart the Shared Services server from Windows services.
It does work (for me). Hope this helps.
Best regards.

Error Register with Shared Services

Hi,
I have a problem while Registering Shared Services in the Configuration Utility. It displays the following error
(Jun 23, 2009, 08:56:30 AM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
java.lang.Exception: Adding following Apps to Project failed : '3891bc871220d6701ea8000.HPS;'.
     at com.hyperion.cis.config.CmsRegistrationUtil.registerApplication(CmsRegistrationUtil.java:222)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeHubRegistrationTask(RunAllTasksWizardAction.java:360)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:165)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Jun 23, 2009, 08:56:33 AM), com.hyperion.cis.config.wizard.CustomSummaryPanel, DEBUG, CustomSummaryPanel in queryExit
I can help me anybody?.
Thanks

Hi,
I have a similar issues, where all the products fail to register with shared services. The error log is as below:
( Jun 24, 2009 1:27:21 AM ): ---- Hyperion Foundation Configuration......
( Jun 24, 2009 1:27:23 AM ): Configure Database :: pass
( Jun 24, 2009 1:27:23 AM ): Common Settings :: pass
( Jun 24, 2009 1:32:35 AM ): Deploy to Application Server :: pass
( Jun 24, 2009 1:33:18 AM ): ---- Provider Services Configuration......
( Jun 24, 2009 1:33:53 AM ): Register with Shared Services :: fail
( Jun 24, 2009 1:34:10 AM ): Deploy to Application Server :: pass
( Jun 24, 2009 1:34:22 AM ): ---- Studio Configuration......
( Jun 24, 2009 1:34:23 AM ): Register with Shared Services :: fail
( Jun 24, 2009 1:34:27 AM ): Configure Database :: pass
( Jun 24, 2009 1:34:39 AM ): ---- Essbase Administration Services Configuration......
( Jun 24, 2009 1:34:42 AM ): Configure Database :: pass
( Jun 24, 2009 1:34:43 AM ): Register with Shared Services :: fail
( Jun 24, 2009 1:36:28 AM ): Deploy to Application Server :: pass
( Jun 24, 2009 1:36:41 AM ): ---- Essbase Configuration......
( Jun 24, 2009 1:36:43 AM ): Register with Shared Services :: fail
( Jun 24, 2009 1:36:47 AM ): Essbase Custom Configuration :: pass
( Jun 24, 2009 1:36:59 AM ): ---- Financial Data Quality Management Configuration......
( Jun 24, 2009 1:37:00 AM ): Register with Shared Services :: fail
( Jun 24, 2009 1:37:03 AM ): Configure FDM Server :: pass
( Jun 24, 2009 1:37:15 AM ): ---- Planning Configuration......
( Jun 24, 2009 1:37:16 AM ): Register with Shared Services :: fail
( Jun 24, 2009 1:39:38 AM ): Deploy to Application Server :: pass
( Jun 24, 2009 1:39:52 AM ): ---- Smart Search Configuration......
( Jun 24, 2009 1:40:19 AM ): Deploy to Application Server :: pass
( Jun 24, 2009 1:40:31 AM ): ---- Workspace Configuration......
( Jun 24, 2009 1:40:33 AM ): Register with Shared Services :: fail
( Jun 24, 2009 1:41:16 AM ): Configure Database :: pass
( Jun 24, 2009 1:44:57 AM ): Deploy to Application Server :: pass
( Jun 24, 2009 1:45:14 AM ): ---- Reporting and Analysis Configuration......
( Jun 24, 2009 1:46:33 AM ): Configure Financial Reporting Server :: pass
( Jun 24, 2009 1:50:02 AM ): Deploy to Application Server :: pass
( Jun 24, 2009 1:50:16 AM ): Services Configuration :: pass
( Jun 24, 2009 1:50:35 AM ): ---- Financial Management Configuration......
( Jun 24, 2009 1:50:36 AM ): Register with Shared Services :: fail
( Jun 24, 2009 1:50:47 AM ): Configure DCOM :: pass
( Jun 24, 2009 1:50:47 AM ): Configure Application Server :: fail
( Jun 24, 2009 1:50:48 AM ): Configure Application Cluster :: pass
( Jun 24, 2009 1:50:55 AM ): Register Application Servers / Cluster ::
Any help would be greatly appreciated.

404 error while accessing sicf services via apache reverse proxy

Hi,
I set up an reverse proxy with apache 2.2 and try to access SICF Services via this proxy. I got the following error message from the sap system:
Service cannot be reached
The termination occurred in system SMP with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:NE-SSMP01_SMP_00-v:0-s:404-r:Notfound
When I access J2EE services via the proxy it works.
Is there any configuration which have to be done in the ABAP Stack for accessing Services via the proxy server?
For tests I tried to access the simple ping service ( /default_host/sap/public/ )
Thanks and best regards,
Tim

Hi Oliver,
I allready checked the SDN posts for the reverse proxy. Maybe I missed something.
The ProxyPreserveHost is on.
I redirect to the ICM. I only redirected to the J2EE for tests. This worked by the way withe the same conifiguration.
Here is my apache config:
VirtualHost *:5443>
        ServerName      domain.com
        ServerAdmin     test.de
     ProxyPreserveHost On
     #ProxyVia On
     #AllowEncodedSlashes On
Rewrite Rules
- forward sap/public/ping?sap-client=001 -> Test Ping
- Passthrough /sap/public/ping/*
- Redirect any other URL -> Test Ping
        RewriteEngine On
        RewriteRule     ^/sap/public/ping?sap-client=001$     /sap/public/ping?sap-client=001          [R,L]
     RewriteRule     ^/sap/public/(.*)                     /sap/public/$1                    [PT,L]
     RewriteRule (.*)                               /sap/public/ping?sap-client=001          [R,L]
     RewriteLog logs/rewrite_SMP.log
     RewriteLogLevel 3
Reverse Proxy to
- Disable Forward Proxy
- Allow Connections from All
- Reverse Mapping for 302 Response
- Forward / Requests to domain.com:8000
        ProxyRequests Off
        <Proxy *>
                AddDefaultCharset off
                Order Allow,Deny
                Allow from all
        </Proxy>
Forward Rules
     ProxyPass             /sap/public/ping          http://domain.com:8000/sap/public/ping?sap-client=001
     ProxyPassReverse      /                    http://domain.com:8000/
</VirtualHost>
Best regards,
Tim

Security Error in accessing Web service from Flex.Where to put crossdomain.xml in axis container?

Hi guys.
Typically webservices are invoked across domains. Flash has defined certain policies which prevent crossdomain access. The only way to bypass this security feature is to put a crossdomain.xml file within the server root of the webservice provider i.e. in our case at http://abc.com. A sample example of crossdomain.xml is as below:
<?xml version="1.0"?>
<!DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd">
<cross-domain-policy>
     <site-control permitted-cross-domain-policies="all" />
     <allow-access-from domain="*" secure="false"/>
     <allow-http-request-headers-from domain="*" headers="*" secure="false" />
</cross-domain-policy>
If the crossdomain.xml is not added the developer will get “Security Error accessing URL” type of messages.
The above mentioned information should be enough for you to get your flex based WebService client up and running.
We are using axis2 to build webservices. We deployed the webservices under axis2 container under repository/srvices folder . But in Flex when we try to call the webservices we were getting the exception saying security error in accessing url. The solution is we need to put the crossdomain.xml o that it is loaded at runtime and allow us to access. In tomcat if we put the file under ROOT directory we could accss the file and we were able to access the webservices deployed under Tomcat. But I googled for Axis2 container and couldnt find any solution.
Please post the reply if anyone knows the solution to it.
Thanks
Raja

Hi. So, I did take a quick look at the Axis2 standalone server and didn't see any way to server up a file such as crossdomain.xml. It seems like it might be a useful enhancement to have the ability to serve up files even if this functionality was very simple/limited and nothing like a full blown http server.
I'd log an enhancement request against axis2 if this is something you'd like to have.
http://issues.apache.org/jira/browse/AXIS2
-Alex

ClassNotFound Error while accessing Shared Libarary from Web Service WAR

Hi All,
I have developed a JAX-WS based Web Service(WAR file) using Jdeveloper 11g and deployed it to Web Logic 10.3.4 server. My web service requires access to a shared library(a JAR file ) which is already deployed on the server. So, I had modified the MANIFEST.MF file to have the reference to shared library as a
optional package(since my web service is WAR) as below.
Manifest-Version: 1.0
Extension-List: bizlib
bizlib-Extension-Name: biz_lib
bizlib-Implementation-Version: Oracle Version 1.1
The biz_lib is the Name of the library as seen in the Deployments section of the Web Logic Admin Console. Since there is no extension name given explicitly in the MANIFEST file of shared library, I have mentioned the name as seen in the deployments for the library. After deploying my WAR, when I go into the details of the Shared Library - biz_lib, the Admin console shows my web Service as part of - "Applications that reference this Library" section. So, I presume that my Manifest is correct. But when I test my web service from Admin Console, I face - java.lang.NoClassDefFoundError. The class that is pointed out as part of the error is part of the referenced Shared Library - biz_lib ( part of a JAR file that is listed in the Class-Path: section of shared library’s MANIFEST file). My Web Application is unable to find the class files in the shared library. Please help me. Please let me know any further information is required.
Regards,
Ram

          I am not sure if this helps. I encountered a similar problem and
          finally resolved it. Initially I got the error 500 - Internal
          Server error, and was not able to access my servlet which I deployed
          using .war file.
          We should make sure that the directory structure under
          WEB-INF/classes directory should reflect the package that
          your servlet belongs to. I had a HelloWorld servlet with
          the statement "package examples.servlets;" on the first line.
          So after compiling this servlet, the HelloWorld.class file
          should be copied into WEB-INF/classes/examples/servlets directory
          and not into WEB-INF/classes directory. After making this change,
          I made a new .war file and that fixed the problem.
          -Balaji.
          "san" <[email protected]> wrote:
          >
          >Hi,
          >
          > i depolyed a WAR file into WL 5.1 as a unzipped file,
          >and when i tried to access sevlet it din't come up, i got a error
          >"404 file not found,"
          >
          >my servlet classes are in WEB_INF/classes directory and i have register
          >the servlet
          >in WEB.xml file
          >
          >but still i couldn't access any servlet from my webApp ie WAR file ,
          >
          >can anyone help me out, Thanks in advance

Error while accessing a service in ESS

Hi All,
I have uploaded a PDF file in KM, i have created KM document iview for that, in portal content when i triying to priview this iview it is getting opened. I have assigned this as link in in ESS but when i am trying to access this link i am getting an error "Page Cannot be Displayed", when i check the log file i am getting some error.
info 2010-04-15 10:39:30:654 ACCESS.OK: Authorization check for caller assignment to J2EE security role [SAP-J2EE-Engine : guests].
/System/Security/Audit/J2EE com.sap.engine.services.security.roles.audit sap.com/irj gsusapdp04 Server 0 0_47203
Full Message Text
ACCESS.OK: Authorization check for caller assignment to J2EE security role [SAP-J2EE-Engine : guests].
warning 2010-04-15 10:39:23:094 Insufficient permissions for getting SLD access information. You can add permissions for your application via the SLD service in the 'Visual Administrator'.
/System/Server/SLDService com.sap.sldserv.SldApplicationService sap.com/tcwddispwda gsusapdp04 Server 0 0_47203
Full Message Text
Insufficient permissions for getting SLD access information. You can add permissions for your application via the SLD service in the 'Visual Administrator'.
[permissions_collection_operator]: [permission_collection]: domain's permissions: [
standalone: []
collections:
{(java.lang.RuntimePermission loadLibrary)(java.lang.RuntimePermission queuePrintJob)(java.lang.RuntimePermission stopThread)}
*{(java.io.FilePermission * read,write)}*
*{(java.net.SocketPermission localhost:1024- listen,resolve)(java.net.SocketPermission * connect,resolve)}*
*{(java.util.PropertyPermission java.version read)(java.util.PropertyPermission java.vm.name read)(java.util.PropertyPermission java.vm.vendor read)(java.util.PropertyPermission os.name read)(java.util.PropertyPermission java.vendor.url read)(java.util.PropertyPermission java.vm.specification.vendor read)(java.util.PropertyPermission os.version read)(java.util.PropertyPermission java.specification.vendor read)(java.util.PropertyPermission java.class.version read)(java.util.PropertyPermission java.specification.name read)(java.util.PropertyPermission file.separator read)(java.util.PropertyPermission java.vm.version read)(java.util.PropertyPermission os.arch read)(java.util.PropertyPermission java.vendor read)(java.util.PropertyPermission java.vm.specification.name read)(java.util.PropertyPermission java.specification.version read)(java.util.PropertyPermission java.vm.specification.version read)(java.util.PropertyPermission * read)(java.util.PropertyPermission path.separator read)(java.util.PropertyPermission line.separator read)}*
Earlier we have EP 7 with SP14, at that time link was working fine, later due to some problem we have undeployed and redeployed ESS/MSS - BP and upgraded SP14 to SP18 now we are facing this error, can you just help me out solving this issue.
Thanks & Regards,
Ramesh.

Hi Ramesh,
I am facing with the same problem. Have you found the solution for it.
Thanks.

Error while accessing web service

I have a web service (EJB).
After generating clients from wsdl file, while i am trying to access the corresponding function from the client, i am getting the following error.
javax.xml.ws.soap.SOAPFaultException: Endpoint {http://data.module.bill.company.net/}DataService does not contain operation meta data for: {http://www.w3.org/2001/04/xmlenc#}EncryptedData
I dont know why it happens.
Can anyone please help me.
Thanks in Advance...

Hi Aseem,
how are you doing ?
Authorizations in portal are user specific.
The current problem is due to the user not having sufficient permissions on the back end to execute the call.
for this check :-
1> the current user in portal
2> mapping to user in the back end
3> back end user permissions for the RFC / BAPI & it's dependant objects
with respect,
amit

Error in accessing shared service

Similar Messages

Maybe you are looking for