Error in activating BI content objects first in P

Hello,
We make an error and activate the BI Content objects as Infoarea, SAP components and application components, InfoObjects first in productiv system without begining with the project in DEV or QA.
Now we find the error, would it be a big problem for us, or how we can just activate the object in development system or QA system, implement the project and transport the new objects at the end without problem. Has sbdy an experiences in such a problem.
Thank!
Ar.

You can transport everything with overwrite and i think wont have any problem....dont forget to transport every object...
Regards

Similar Messages

  • Error while activation the Datastore Object

    Hi folks,
    I am in SAP BASIS, so not aware of BI very much...can u help me in this,
    One user is getting error while activation the Datastore Object
    below is error log,
    (Green) Activation of Objects with Type DataStore Object
    (Green) Checking Objects with Type DataStore Object
    (Green) Checking DataStore Object DSO_TEST
    (Green) DataStore object DSO_TEST is consistent
    Table/view /BIC/VDSO_TEST2 (type VIEW) from DataStore object DSO_TEST saved
    Change log for DataStore object "DSO_TEST" saved successfully
    Writing of object catalog entries (TADIR)
    (RED) The creation of the export DataSource failed
    (RED) Error during the retrieval of the logon data stored in secure storage
    (RED) Error when creating the export DataSource and dependent Objects
    (RED) Error when activating DataStore Object DSO_TEST
    Thx. in advance
    Yash

    Hi Yash,
    Check out the below thread:
    [activation of the Datastore Object.|error in ODS activation/export datasource;
    Hope it helps you!
    Please reward points if helpful
    Manish

  • Error when activating Business Content

    Hi Ladies/Gents
    I get this error when activating BC: "Element 4EHBH4SLF21UQ1UFOHVN4SZVJ is missing in version D"
    I have successfully activated HR: Personnel Admin Data Targets and ETL structures. I also loaded master data to all I/O's and transaction data to the Cubes. I am now activating the queries and when I activate just the first query I get this error. I have searched everywhere for this element that is missing but can not find it. The query that I am trying to install is: "Number of entries". Note that some of the other queries were installed successfully.
    Thanks!

    Hi,
    This element is not available in "Number of entries" query. Try to check in query designer where this element is there in query or not.
    Also try to reinstall this query from Business content
    Regards
    Sangita

  • Error while activating BI Content infocube - 0IMFA_1(IM: Assigned Plan Bud)

    Dear All,
    While I am trying to activate the Business Content cube 0IMFA_1(IM: Assigned Plan Budget (Operative) ) with Collection Mode 'Automatic' and Grouping ' In dataflow bef and afterwords', I am getting the following error -
    " Object 0IMPLAN (Currency Translation Type,CTRT) could not be collected for object 1308CQ25VCD0H9UCVDTKXM7BB (Query,ELEM)
    Message no. RSO296
    Diagnosis
    You have collected objects in the BI Metadata Repository. Associated objects for object 1308CQ25VCD0H9UCVDTKXM7BB of type Query,ELEM have also been collected. Object 0IMPLAN of type Currency Translation Type,CTRT was among these objects.
    However, this object 0IMPLAN of type Currency Translation Type,CTRT is not available in the metadata repository.
    System Response
    Object 0IMPLAN of type Currency Translation Type,CTRT is ignored in further collections. The links for object 1308CQ25VCD0H9UCVDTKXM7BB of type Query,ELEM are incomplete. This may result in you not being able to activate this object.
    Procedure
    If this error occurs while you are installing BI Content, an error may have occurred during the delivery. Inform SAP. In all other cases, check that the object has not been deleted by another user during collection, for example. "
    I am unable even to find this object.
    Kindly let me know how to solve this issue.
    Many Thanks in Advance,
    With Warm Regards,
    Vineeth

    The log says, infoobject 0IMPLAN is not available in Metadata repository.
    To make sure, RSA1--> BI Content --> Object types --> under InfoObject (middle window), double click 'Select Objects' and search for infoobject '0IMPLAN'. (in ur system its not available).
    What u have to do is:
    Either collect object by selecting Grouping ' In dataflow before' , so that u can insatll all backend objects and do the data loads.
    Then, install frontend object,by selecting Grouping ' In dataflow afterwords'
    OR
    Since u have selected Grouping ' In dataflow bef and afterwords'...
    After the collection is over, from right most window, select 'Query elements'  --> right click --> Donot install any below
    Do the same for BEx web template, Web Items, Querey Views, workbooks etc

  • Error while activation of ODS Object.

    Hi,
    I have loaded the data from R/3 to a ODS Object and the activation of ODS failed due to the following errors as shown below..
    -Value '20060 ' of characteristic 0CALQUARTER is not plausible
    -Error when assigning SID (details in long text)
    -Activation of data records from ODS object ZODS_02 terminated
    -Error getting SID for ODS object ZODS_02
    I could see that Calendar Quarter as 20060 in table /BIC/AZINV_O0240. There is a calendarday mapped to quarter and year in update rules of ODS object. How the calendar quarter is populated in update table in BW. How should i get rid of this error. Any idea would be appreciated.
    Regards,
    Raj

    don't post same issue twice. Bhanu working on your thread.
    check this ...
    Raj,
    you are getting this calender qurter from SAP right... check in RSA3 fro the your Datasource. if you are getting same value like '20060'. you can do one thing... you can set 'No Update' in Transfer Rules. you can write a routine in Update Rules for populating the data for calender Week.
    you can call some standard function modules or you can write a small routine. If you want to write a routine check this thread...Re: Date to Quarter
    Possibilites:
    1. updtae rules
    2. if RSA3(PSA) shows the value of the Quarter as '20050', if it is custom extractor(Generic using FM) you can change this.
    3. If it is Standard Extractor or Generic Extractor (using either view/table or Infoset) you can enhance this. you can do the same thing in SAP Side.
    All the best.
    Regards,
    Nagesh Ganisetti.

  • Error activating BI content object

    I receive an error activating update rule from BI content.
    Function module /SDF/AL_MAP_TRANSID_LOGH does not exist.
    I looked up SAP note 1114719, but the recommended package is already setup.
    any suggestions

    Hi Ashish T,
    Have you tried to create these manually before BI content activation?
    Best Regards,
    Ricardo

  • Error while Activating Tech Content in SPRO

    Hi All, I am trying to install Tech Content & Admin Cockpit. I am following the recommended steps(OSS 934848). When I run the RSTCC_ACTIVATE_ADMIN_COCKPIT, it errors out & gives following message:
    E:RS:062 0TCTBWOBJCT_TEXT BWU-010 A
    We are on SP12 & BI content 7.03 sp5.
    kindly help!
    Regards
    PK

    Hi,
    Try to simulate the program in SPRO before executing.
    First Try out in the given order, one by one
    1. Activate SAPI Data source
    2. Replicate data  sources only
    3. Replicate data  sources along with repair missing Info packages.
    4. activate techinical content.
    Try this activities in simulation mode.
    if u find any errors like data source is not available or inconstancies in infopackages etc
    U need to delete the inconsistant objects manually or u can also manually install some of data sources which throws error messages.
    Go through the note 1074229, 1039381
    Regards,
    Srinivas.

  • Error in Activating Business Content

    Hi all,
    When trying to activating the technical content infosources from business content , I am getting the error "DataSource 0TCTAGGRST_TEXT from source system BWDCLNT200 could not be activated" , I have checked the source system everything seems to fine.
    Thanks

    Hi,
    did you goto sbiw in BW to activate the BCT datasources  and the application hierarchy first? If not, this should be the first step.
    regards
    Siggi

  • Activation error when activating BI Content

    Hi Gurus,
    We use BI 7.0 with SP18.
    I'd like to activate the BI Content in 'SAP Governance, Risk, Compliance (GRC) - 0GRC' area. Two sub areas, 'SAP GRC Access Controls (AC) - 0GRC_AC / SAP GRC Compliant User Provisioning (CUP) - 0GRC_AE' and 'SAP GRC Access Controls (AC) - 0GRC_AC / SAP GRC Risk Analysis and Remediation (RAR) - 0GRC_CC'
    Everythin looks ok, but only one DSO objects cannot be activated, the error message is the next:
    'Mapping between 80GCC_URP SYSTEM_MANDANT 80GCC_URP is inconsistent'
    After that I tried to activate manually via RSA1 transactions, but the erros message is the next:
    'Object 0GCC_URP could not be activated'
    What is the matter with this DSO, or VIRSA content?
    Thanks for your helps!

    Hi Oscar,
    Thanks for your reply. I tried to activate every 0GCC* DSO, I got error message, after that I tried to activate only 0GCC_URP from content, result is same. After that I tried to activate via RSA1, got error message too...

  • Error while activating the info object.

    Hi,
    While activating one of the info objects, i am getting the following error message:
    Characteristic 0BP_GRP: Cannot switch off InfoProvider property
    Message no. R7B289
    Diagnosis
    The characteristic receives master data from other objects (for example, transformations or update rules). Therefore it is necessary to select the characteristic as an InfoProvider.
    Procedure
    If you want to deselect the Characteristic Is InfoProvider indicator, delete the corresponding objects in the data flow.
    Thanks and Regards
    Niren.

    Hi Niren,
    Check the below thread..
    Howto Remove 0Employee Char from my InfoArea
    Hope it helps..
    Regards,
    Ramki.

  • Error while activating Business Content

    Hi!
    I'm trying to activating a BC ODS.. but when I run the installation simulation I get the following error message:
    "InfoObject 0KN_USE is not available in version A"
    I've marked the infoobject 0KN_USE to be installed..
    Any ideas of how to proceed?
    BR
    Bjørn

    Maybe that infoobject existed before in inactive version, check it and activate manually, after that activate business content version

  • Error while activating Data Store Object

    Hi Guru's,
    When I try to activate a data store object i get the error message :
         The creation of the export DataSource failed     
         No authorization to logon as trusted sys tem (Trusted RC=2).     
         No authorization to logon as trusted sys tem (Trusted RC=2).     
         Error when creating the export DataSource and dependent      Program ID 4SYPYCOPQ94IXEGA3739L803Z retrieved for DataStore object ZODS_PRA

    Hi,
    you are facing a issue with your source system 'myself', check and repair it. Also check if the communication user (normally ALEREMOTE) has all permissions needed.
    kind regards
    Siggi

  • Error while activating ABAP proxy object

    Hello,
    I can see all the interfaces of PI7.0 in my ECC6.0 system.
    I am able to create abap proxy object of a interface.
    But when I try to activate that I am getting error as
    "RFC system error for destination GTADIR_SERVER".
    Pl can you suggest. appreciate quick help in this.
    thanks in advance,
    Sharada

    Hi,
    For more details take a look at note:  [1063482 - Creating Dictionary objects - RFC error GTADIR_SERVER|https://service.sap.com/sap/support/notes/1063482]
    It is written that: Message SGSUB 104 is not an error message, but is merely irrelevant information for customers. You can continue to create objects nevertheless.
    To get rid of this annoying error you have to implement the corresponding  support package.
    Regards,
    Jakub

  • DBIF_RSQL_INVALID_RSQL Error while activating the ODS Object

    Hello BW Friends,
    We have used the Extractor 2LIS_11_VAHDR and enhanced and coded the user exit to extract the data to the required field. Extractor is working fine and able to get the records but when we tried to schedule a data load in BW the request was shown green in the ODS and when saw it in monitor it is still yellow and zero in PSA and the processing hasn't completed. When i tried to activate it manually there is a short dump generated with this error, DBIF_RSQL_INVALID_RSQL. If any one of you has encountered same problem please let us know. Appreciate your prompt response on this.
    Regards,
    Rajesh

    Raj,
    I misunderstood your question.... check whether source system job is processing or not? what about any blocked TRFC'sin SM58.
    try to find root cause... ODS activation is not a problem... load is not finished you tried to acivate the request still in the process Yellow.
    try to check in Monitor details tab page messages...
    All the best.
    Regards,
    Nagesh Ganisetti.
    Message was edited by: Nagesh Ganisetti
    Message was edited by: Nagesh Ganisetti

  • Error in Activating Business Content in SPP

    When we tried to Activate the business content for SAP SPP(using RSA1), We received the ABAP runtime error - OBJECTS_OBJREF_NOT_ASSIGNED. The error message is as follows.
    Error in the ABAP Application Program                                                                                The current ABAP program "CL_RSD_IOBJ_VERS==============CP" had to be  terminated because it has come across a statement that unfortunately cannot be executed.
    Any suggestions how to rectify this?

    Thanks for the update. It helped. We could transfer and istall the required infoobjects, infosources and infoareas.
    We could also transfer the update rules, but the tansferred and installed 'update rule' is being shown as 'inactive, not executable'. Any idea how to fix this?
    Thanks,
    Prashanth

Maybe you are looking for