ERROR IN ACTIVATING DATASOURCE
hi,
i am getting error "Generation of conversion exits and PSA update..." " when i am activating datasource, tried it using the report,
rsds_datasource_activate_all" but getting the error "no datasource with these attributes".
Hi,
Try Activating the Datasource using the programme RS_TRANSTRU_ACTIVATE_ALL --> Source system: give your source
system name, Infosource gen: give your datasource name-->Check the only inactive check box and execute
If you already done.. check the source system connection and check the naming convetion of Z or Y fields and also check in
transfer structure..
Sreenu
Similar Messages
-
Error when activating datasource
Hello,
I am trying to create a new transaction data datasource assigned to a flat file source system. When i hit the check i get no errors but when i try to activate the activation fails with errors. The error Message No. RSO404 says "Error when activating Datasource". We are on BW 7.0 stack 12.
Has anyone seen this? It is hard to troubleshoot it when i get no real errors to go on. It is a very simple three field datasource with one characteristic, one key fig, and an additional currency characteristic. The key fig is in external format and references 0CURRENCY. Does anybody have any insight?
Thanks,
TMSHi TMS,
I am facing exactly the same problem here...
transactional datasource for flatfile gives me errors DO313, RSO404 and then RSDS106
We are on:
SAP_ABA 700 0011 SAPKA70011
SAP_BASIS 700 0011 SAPKB70011
PI_BASIS 2005_1_700 0011 SAPKIPYJ7B
SAP_BW 700 0012 SAPKW70012
FINBASIS 600 0008 SAPK-60008INFINBASIS
BI_CONT 703 0005 SAPKIBIIP5
SEM-BW 600 0008 SAPKGS6008
Did you manage to find a solution? -
Error When Activating DataSource in BI
Hi,
I have created a Generice Data Source in source system and replicated the same in BI. I am getting error 'Error when activating Datasource '.
Kindly give me some suggestion how to rectify it.
Regards,
Sangeetha.AHi,
First check whether u have activated the data source in the transaction RSA6. Also, check whether the data source which you activated is listed in transaction RSA5.
Regards,
Krishna. -
Error when activating Datasource in Source System
Dear All,
I am gettting this error when activating data source in source system(RSA5).
1)DataSource 0NETWORK_CUST_ATTR; switch to package PS_IS_EHP3_SFWS_SC is off.
2) The extract structure DTTV_REC_53 of the DataSource 0TV_REC_531 is invalid
Message no. R8444
Diagnosis
An invalid extract structure has been assigned to the DataSource. An extract structure has to be active in the DDIC. It cannot be a view, since the customer is not able to add append fields for filling in the customer exits to a view.Hi
To use this datasource, you need to install EHP3 package.
http://help.sap.com/saphelp_nw70/helpdata/EN/b0/7b6c759c494ffcbf821d2442687888/frameset.htm
Chandu. -
Getting error on activating datasource in BW
Hi
im getting an error while trying to activate the datasource at BW.
The error is
<b>Field TOTAL_CLAIM_AMT_TRSH ( Position 211 ): Field name is longer than 16 characters</b>
What can be the issue?
Regards
LeonHi ,
Execute the SAP_RSADMIN_MAINTAIN program.
Enter the value RSAR_LONG_FIELDNAME in the 'OBJECT' field.
As of Support Package 16 (3.0B) and 10 (3.10 Content), you can take the name of the transfer structure from the longtext of error message RSAR 492. Enter this in the 'VALUE' field.
For lower Support Packages, you can take the name of the transfer structure from the TRANSTRU field of the RSISOSMAP table with:
OLTPSOURCE = Name of the DataSource
LOGSYS = Name of the source system
Hope that helps.
Regards
Mr Kapadia -
Error when activating DataSource - Message no. RSO404
Hi there,
does somebody know what could be the problem at this point?
I was trying to activate a real time data acquisition data source.
Thanks.
Regards
FedeXwhen I try to perform a manage on the DataSource I get the following message:
<b><i>Invalid DataStore object name /BIC/B0001633: Reason: No valid entry in table RSTS
Message no. RSM1294</i></b>
Does it say somthing to you?
Regards
FedeX -
Error while activating the datasource [UD Connect]. getting error as '&'
Hi Friends,
I am trying to get the data from a SQL source through UD connect.
I do the proposal and map all the info objects to the respective columns.
When i acticate the data source i am getting the error as
'&' and Error while Error when activating DataSource 'ZEFF_ENTRY UD_ECUBE'
Please do tell why such errors occur and also the solution to handle such errors.
Thanks in advance.
VeenaHi,
where you are getting error in ECC?. or in BW?. If it is already in use, then you need to clear all Queues and then try to activate it.
Thanks
Reddy -
Error when activating an R/3 generic datasource in BW
Hi
I've created a generic datasource in R/3 4.6C system using a table view over R/3 standard Project System tables with joins. This datasource has been activated. I then replicated this generic datasource in BI7 datawarehousing environment. The replication went ok and I could see the R/3 generic datasource in RSA1. When I tried to activate this datasource I received this error message:
Error when activating DataSource ZPROJECT_ATTR Message no. RSO404
I didnt have similar problem with the other generic datasources.
I'm currently working on Netweaver 2004s BI support pack 10 environment.
Please let me know how to fix this problem.
Many thanks,
AnthonyHi Anthony,
Do go through the note's detailed text and do listen to this advice from an old man. Do read the section below in the note and do assign some points to this geezer "lying" on his deathbed.
Quote from the note (this one rhymes..yaa):
Source system = R/3 Release 4.0B ff (all subsequent releases including 4.7 and so on)
= BW Datamart 2.0B, 2.1C, 3.0B, 3.10, 3.50, 7.00 ff
= CRM release 2.0, 3.0, 4.0 ff
unquote...
Cheers
Neeraj -
Error generating/activating WebService BW DataSource
Hello,
I created a BW DataSource using WebService in BI7 and I got the following errors when trying to activate it.
Error generating Web service /BIC/CQZBRSDAT00001000
Message no. RSDS301
Error when activating DataSource ZBRSDATA WEBSERVICE
Message no. RSO404
Could anyone please advise for any inputs/tips for the issue? I found below two threads but the OSS Note 913944 appreantly does not exist anymore (not sure if it is being removed, updated, etc).
Web service data source - error RSDS301
Problems with DataSource Web Service BI 7.0
Thanks & Regards,
AndyHello
We will move this thread to the [SAP NetWeaver BW|SAP Business Warehouse; forum as this is not a PI specific issue. You will have a better chance of getting a quality answer to your query on this forum.
Regards
XI/PI Moderator -
Error while activating Data source
Hi,
I hit an error while activating data source with adapter 'WEB_PUSH web service'.
The error message is 'Generation of conversion exists and PSA update ...' with details 'Error generating Web service /BIC/CZZZ_0010000100 ...' and 'Error when activating DataSource ZZZ_001'.
I can't find much detail on this error.
Has anyone hit this error before and if you did can you please let me know what to check?
Thks & Regards,
BbeeHi,
I am having the same problem. Have you been able to solve the issue since you posted this last year?
Thanks,
TCT -
Error while activating extarctors
Dearl all,
we replicate the data in qty bi
After importing all extractors into qty ,
My data sources are in inactive status even i try to cativate manually,
we have 10 extractors with same application among that 5 are active version seems to be 3x version.,
i got the message as error ,
Error when creating transfer structure /B299/xxx in source
system xxx
Error when activating DataSource xxx
could you any one share with any idea about this ,we tried with program,Rs_transtru_actvate_all
but its doent worked out,and we maintain the namespace /B299 aslo in ECC qty and BI qty.Dear All,
please share ur suggesion this is now very urgency,,
after EHP 5 upgradation only am getting the problem bfore that it was fine.
even we were tried reimport option ,but its getting rc 8 error
in transport log it showing th above mesaage
after replicating the datasource only objects are imported.,
if there is any possible reason is there?
please guide me how to reolve
apart from rstranstruactivateall program any solution?
please............ -
Error - When Activating Generic Data source in BW DEV
Hi,
I am working in BI 7.0
I created a Generic Data source
I had checked in RSA3 , it is showing records too.
i replicated the Datasource in BW
Datasource is available in BW
Then I try to activated the Datasource
because
when i try to create tranformation for the data source then
It will show this message (and transformation is not created)
<b>Source RSDS ZCOPC_C10 GDVCLNT110 does not exist</b>
My Data source name is ZCOPC_C10 for source system GDVCLNT110
then I will try to Activated the Data source First
then also it will show the Error like this
Post Processing/Checking the Activation for DataSource ZCOPC_C10 GDVCLNT110
<b>&
Error when activating DataSource ZCOPC_C10 GDVCLNT110</b>
and the
DataSource ZCOPC_C10 (GDVCLNT110) could not be activated
can some body help me to solve this problem
sure you can get the points
Thanks
prasannaHi Oscar,
The Data source is not Active in BW, I had checked in Data source defination.
when I activate the Data source .
<b>I received the Message / Error</b>
Activation of Objects with Type DataSource
Saving Objects with Type DataSource
Internal Activation (DataSource )
Preprocessing / Creation of DDIC Objects for DataSource ZCOPC_C11 GDVCLNT110
Save DDIC object /BIC/CAZCOPC_C000020000001 (Application Structure for ZCOPC_C11 GDVCLNT110)
Save DDIC object /BIC/WCAZCOPC_C000020000001 (Application Structure for ZCOPC_C11 GDVCLNT110 - T)
Save DDIC object /BIC/CAZCOPC_C00002000 (Segment Structure for ZCOPC_C11 GDVCLNT110 - Appli)
Save DDIC object /BIC/CCZCOPC_C000020000001 (Character Structure for ZCOPC_C11 GDVCLNT110)
Save DDIC object /BIC/WCCZCOPC_C000020000001 (Character Structure for ZCOPC_C11 GDVCLNT110 - Tab)
Save DDIC object /BIC/CCZCOPC_C00002000 (Segment Structure for ZCOPC_C11 GDVCLNT110 - Chara)
Save DDIC object /BIC/B0001051 (PSA for ZCOPC_C11 GDVCLNT110 Itemization)
Writing of object catalog entries (TADIR)
Object TABL /BIC/CAZCOPC_C000020000001 written to the ObjectCatalog (TADIR)
Object TTYP /BIC/WCAZCOPC_C000020000001 written to the ObjectCatalog (TADIR)
Object TABL /BIC/CAZCOPC_C00002000 written to the ObjectCatalog (TADIR)
Object TABL /BIC/CCZCOPC_C000020000001 written to the ObjectCatalog (TADIR)
Object TTYP /BIC/WCCZCOPC_C000020000001 written to the ObjectCatalog (TADIR)
Object TABL /BIC/CCZCOPC_C00002000 written to the ObjectCatalog (TADIR)
Activate all Dictionary objects ( 6 ):
All DDIC objects have been activated / deleted
<b>Post Processing/Checking the Activation for DataSource ZCOPC_C11 GDVCLNT110
Error when activating DataSource ZCOPC_C11 GDVCLNT110</b>Deletion of Unused Dictionary Objects ( 6)
All DDIC objects have been activated / deleted
Deletion of Object Catalog Entries (TADIR)
Object TABL /BIC/CAZCOPC_C000020000001 deleted from TADIR
Object TTYP /BIC/WCAZCOPC_C000020000001 deleted from TADIR
Object TABL /BIC/CAZCOPC_C00002000 deleted from TADIR
Object TABL /BIC/CCZCOPC_C000020000001 deleted from TADIR
Object TTYP /BIC/WCCZCOPC_C000020000001 deleted from TADIR
Object TABL /BIC/CCZCOPC_C00002000 deleted from TADIR
All unused DDIC objects have been deleted
Thanks
prasanna -
Error with transporting datasource
Hello,
I have an issue activating a datasource. I created a generic datasource called 'ZHIP_TD_CLOSE_INV_BALANCE' within BW - i.e the source is BI and NOT R/3. I created transformation from datasource to Cube and loaded data. Everything is working fine. Now when I transport the datasource from Dev to Quality the transport failed. The error log says 'InfoSource ZHIP_TD_CLOSE_INV_BALANCE is not available in source system WP1CLNT310' & 'Error when activating DataSource ZHIP_TD_CLOSE_INV_BALANCE WP1CLNT310'. I do not have an infosource to begin with. So then when I go and try to activate the datasource in Quality, I get the same message i.e. 'InfoSource ZHIP_TD_CLOSE_INV_BALANCE is not available in source system WP1CLNT310'. How do I fix the error and get the transports through? Remember, the existing config works fine in Dev. Thanks for your help in advance.
Thanks
Nishawhat objects are you trying to transport along with the data source ? If you have transfer rules along with this request then might be you would get this error. Also check if your source conversion is maintained correctly. you can check that in RSA1 > Tools > Conversion of Source system names.
Here maintain the system conversion. Once done, recreate a transport request with only data source and transport. Once done replicate and transport your other objects. -
Error while activating the datasource during migration
Hi Guys,
When we were trying to migrate the datasources from 3.x to BI 7.0, we are encountering an error with the activation of the datasource. The datasource itself has been migrated but the ativation log gives and error
Error in activating the datasourc----RSO404
Has anyone encountered this issue? Your input is highly appreciated.
Regards,
DonivVoodi,
Thanks for the response but the note talks about deletion of the DTP causing the errors. Moreover we are already on SP 13. Any other ideas?
Doniv -
ERROR WHILE ACTIVATING THE DATASOURCE
Hi Experts,
I'M WORKING ON BW3.0B.I'M GETTING ERROR WHILE ACTIVATING THE DATASOURCE
1. EVENT WITH ERRORS EXTRACT IN DATA SOURC 2LIS_11_VAHDRHi,
where you are getting error in ECC?. or in BW?. If it is already in use, then you need to clear all Queues and then try to activate it.
Thanks
Reddy
Maybe you are looking for
-
HR_INFOTYPE_OPERATION is not working in user exit ZXPADU02
Hi frndz, i want to delimit/modify record in infotype 0014 after checking some condition when user clicks on SAVE in infotype 0008. For this i'm using the code like below. In Include ZXPADU02. when '0008'. IF sy-ucomm = 'UPD'. chek <condition> if s
-
Hi All I create a new transaction type in inventory and Check Status Control to enable material status control for this transaction type. but it is not apper on Material Status Control form.also i set the profile option INV: Material Status Support t
-
Exporting exact size image file
CS3/4 Can anyone tell me now to go about setting things up so that if I export my work to an image format like *.psd... I can predetermine the exact size the image will be? I've groped around in the help file but this kind of thing is hard to nail do
-
Include-owa and character escaping
Hi. We are using include-owa to return user entered databse text within well formatted tags. Sometimes text contains & and other XML characters. We then "get XML returned from PLSQL agent was not well-formed error" How can we easily escape all text v
-
i own a 30gb zen vision :M and it was working fine until my last pc broke, i since bought a new pc and re-installed everything, now my zen will not connect to my pc at all, i've tried EVERYTHING that the creative team have suggested and nothing is wo