Error in activating init flag for delta load

Hi everybody, I am trying to activate the init flag for delta load, when I schedule the infopak it is taking too long to execute and the status is remaining in yellow for a week. I checked in details tab the error message is u201C no data available in source system u201C Please helpu2026

Hi Vinod,
When there is no data available in the source system, you will have yellow flag for the delta init request. Check for the delta queue entry (RSA7) on the source system. Delta mechanism starts working once this flag is created. After that schedule the delta infopackage.
Also check on the source system whether there is any data avilable in the application tables related to this datasource. Take the help of functional consultants if required.
Regards,
Sreenivas.

Similar Messages

Short dump error for delta load to 0CFM_C10 via 0CFM_DELTA_POSITIONS flow

hi all,
i am getting short dump error for delta load to 0CFM_C10 via 0CFM_DELTA_POSITIONS flow.
not able to figure out the actual issue and how to solve it.
can anyone suggest?
below is the details of the short dump
Short text
    Exception condition "UNKNOWN_TRANSCAT" raised.
What happened?
    The current ABAP/4 program encountered an unexpected
    situation.
What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    A RAISE statement in the program "CL_SERVICE_TRG================CP" raised the
     exception
    condition "UNKNOWN_TRANSCAT".
    Since the exception was not intercepted by a superior
    program, processing was terminated.
    Short description of exception condition:
    For detailed documentation of the exception condition, use
    Transaction SE37 (Function Library). You can take the called
    function module from the display of active calls.
How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "RAISE_EXCEPTION" " "
    "CL_SERVICE_TRG================CP" or "CL_SERVICE_TRG================CM003"
    "SORT_TRANSACTIONS"
    or
    "CL_SERVICE_TRG================CP" "UNKNOWN_TRANSCAT"
    or
    "SBIE0001 " "UNKNOWN_TRANSCAT"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.

Hi,
It seems like some routine are there and check your rotines , transformation etc.
Regards
sivaraju

ALE change Pointers for delta load

The master data datasource is 0CRM_BPSALESCL_ATTR, which is in my source system use change pointers for delta loading. When I use delta loading, the error is "ALE change pointers are not set up correctly". I went to the source system, and use BD61 to activate change pointers. But it does not work. Then I created new Business partners to make changes. I can find these new records in table CDHDR and CDPOS, but there is no records found in table BDCP. And my delta loading still got the error as "ALE change pointers are not set up correctly."
Can anybody give me advice?
Thanks,
Wenjie

Hi, Ron,
Thanks for your reply. I already assign points to you.
I relicated the datasource, and re-active the transfer structure, but it still doesn't work. My one more question is that do I run BD61 on BI system or on source system? I did on source system only. And is there any more setting need to be done on source system? Because my error message said setting on source system is wrong.
Thank you very much.
wenjie

Missing some master data for delta load( its very urgent please)

Hi,
I am working master data for delta load,the problem is when ever changes(SO) in r/3 RECORDS for address text,City Dstrct Nm.its not getting loaded into BW.every day some delta records are coming into BW.
the data coming thru bw satging and bw.Please help what would be reson and where can i find the detail info,where is it missing.Please see below for example.
Address Number/ Addr Ln 1 Txt/ City Dstrct Nm
9025750333/ #/ #
help me its very urgent

Hi Sumanth,
check the delta queue and the V3 job is it running correctly ,
Have a look at OSS note :728687
and also see the following thread
Deltas are not available in Delta que
Delta Queues are not cleared in R/3
No data in RSA7 for 2lis_03_bf : HELP
check the data may b it is in modifide status not active.
regards,
supriya

Can we use both 0FI_AP_3 and 0FI_AP_4 for Delta Loads at the same time.....

Hi Gurus:
Currently my company uses 0FI_AP_3 for some A/P reporting. It has been heavily customized & uses Delta loading. However, SAP recommends the use of "0FI_AP_4" for A/P data fro delta loads. I was able to Activate 0FI_AP_4 as well & do some Full Loads in Dev/Test boxes. Question is whether I can use both the extractors for "Delta" loads at the same time......? If there are any issue, what is the issue and how ccan I resolve it? Is the use of only one extractor recommended......??
Please let me know as this impacts a lot of my development....! Thanks....
Best...... ShruMaa
PS: I had posted this in "BI Extractors" forum but there has been no response...... Hope to get some response.......! Thanks

Hi,
I would recommend you to use 0FI_AP_4 rather using both, particularly for many reasons -
1. DS: 0FI_AP_4 replaces DataSource 0FI_AP_3 and still uses the same extraction structure. For more details refer to the OSS note 410797.
2. You can run the 0FI_AP_4 independent of any other FI datasources like 0FI_AR_4 and 0FI_GL_4 or even 0FI_GL_14. For more details refer to the OSS note: 551044.
3. Map the 0FI_AP_4 to DSO: 0FIAP_O03 (or create a Z one as per your requirement).
4. Load the same to a InfoCube (0FIAP_C03).
Hope this helps.
Thanks.
Nazeer

Error in activating status profile for SVT

Hi,
I've been trying to activate status profile EHS_SO for SVT in REACH compliance version 2.0 . But I am stuck.
When I save a sales order, a message-'Error when activating status 0001 for status profile EHS_SO in order XXXXXX' has come up. My IMG settings are as follows:
Sales documentr: No existing status profile used
Status profile: EHS_SO added with status SD
Environment parameter:SVT_SO_PROFILE: EHS_SO
SVT_SO_STATUS: 0001 used
Activate Status profile: STUCK (can't figure out the object type for VBP object type category)
Does anyone know?

Hello Bomi,
Please see SAP note # 1111196. It talks about Status profile for sales order and status profile for production orders for online check for SVT.
May be useful to you.
Regards,
Niraj

Inventory - No Marker update is set for delta loading, any impact ?

Dear all,
Since several days the daily delta on inventory cube is done with flag "no marker update set".
What are the possible issue ?
Do we have to reload the data or can we just set the flag as unchecked ?
Thanks for your help
Best regards
Christophe
Edited by: Christophe Courbot on Sep 15, 2011 5:04 PM

Hi,
Pl check below
Marker Update is used to reduce the time of fetching the non-cumulative key figures while reporting. It helps to easily get the values of previous stock quantities while reporting. The marker is a point in time which marks an opening stock balance. Data up to the marker is compressed.
The No Marker Update concept arises if the target InfoCube contains a non-cumulative key figure. For example, take the Material Movements InfoCube 0IC_C03 where stock quantity is a non-cumulative key figure. The process of loading the data into the cube involves in two steps:
1) In the first step, one should load the records pertaining to the opening stock balance/or the stock present at the time of implementation. At this time we will set marker to update (uncheck 'no marker update') so that the value of current stock quantity is stored in the marker. After that, when loading the historical movements (stock movements made previous to the time of implementing the cube) we must check marker update so that the marker should not be updated (because of these historical movements, only the stock balance / opening stock quantity has been updated; i.e. we have already loaded the present stock and the aggreagation of previous/historical data accumulates to the present data).
2) After every successful delta load, we should not check marker update (we should allow to update marker) so that the changes in the stock quantity should be updated in the marker value. The marker will be updated to those records which are compressed. The marker will not be updated to those uncompressed requests. Hence for every delta load request, the request should be compressed.
Check or uncheck the Marker Option:
Compress the request with stock marker => uncheck the marker update option.
Compress the loads without the stock maker => check the marker update option.
Relevant FAQs:
1) The marker isn't relevant when no data is transferred (e.g. during an delta init without data transfer).
2) The marker update is just like a check point (it will give the snapshot of the stock on a particular date when it is updated).
Reference information:
Note 643687 Compressing non-cumulative InfoCubes (BW-BCT-MM-BW)
Note 834829 Compression of BW InfoCubes without update of markers (BW-BEX-OT-DBIF-CON)
Note 745788 Non-cumulative mgmnt in BW: Verifying and correcting data (BW-BCT-MM-BW)
Note 586163 Composite Note on SAP R/3 Inventory Management in SAP BW (BW-BCT-MM-IM)
Thanks and regards

Repair request for Delta load? Orders missing in Billing line Items

Hi
I am using BW 3.5; Some Orders are missing in BW for Billing line item reports (2LIS_13_VDITM) according to the users.
The report is based on Cube directly, ODS is not used. I planned to do a repair full request for this month's data so as to get the missing orders.
Could you please advice me on correct procedure to do that? Delta loads runs every day and todays delta is completed.
Thanks and BR
P.B

While it's usually recommended to execute setups during "quiet time", it's not required. Especially in this case. Since you're going to be restricting the setup to only extract a range of Billing Documents that are representative of the dates of data missing (or purely the identified missing documents), there is no need to wait for "quiet time" because you'll pick up the data either in your Full Repair extract or in the delta extract. Depending on how the target InfoProvider for this data is setup (cumulative v. non-cumulative), you may have to look out for duplicate data.
My recommendation would be to run your setup for only those documents that have been identified as missing. That way, you're limiting the amount of data that's required to be extracted to the setup table and then into BW, but also will remove any risk of duplicate data in your target InfoProviders.

Selection Criteria for Delta loads triggered using MDM_CLNT_EXTR

Hi ,
Currently we are required to load data only from two specific account groups . Therefore in the selection criteria in mdm_clnt_extr we maintian these two account groups and extract data.
However, when setting up the delta load there does not to be an option to restrcit the delta to a specify an criteria. Therefore, in our case several records from account groups which are not required are passed on to the MDM system.
Is there a way to address this requirement ?
1. There is an option to run the initial load variants at regular intervals, the problem with this is that in our case we have several variant creates as the R/3 system does not allows extraction on more that 999 records at a time. Therefore at point of time to capture the delta records , if we run all these jobs our network gets choked.
2. Run delta job, but without selection criteria it pulls out records which we don't require
Any suggestions on how this problem can be addressed are welcome ,
Thanks in advance,
Anita George

Thanks Michael !
Well, regarding hte ALE settings, we did take a look in bd64 the filters are based on objects which one of these is relevant for customer account groups ? Probably in the future we would require all data, and then is it enogh to remove the filter ?
Can a filter be maintained at the XI level , this would be good as only the required account groups are passed on to MDM . Is there any documentation on available on this ?
Regarding the Import Manager, will have to check this functionality, as it is now no matter how many times we update the map/rename /load/unload it automated imports keep failing.
Our R/3 system seems to have problem extracting more than 999 records, as we tried with different number of records and all those extraction jobs got cancelled. So, currently we are running multiple jobs for the initial load and even this is very time consuming.
Thanks & Regards,
Anita George

Question for delta loading

Hi, Gurus,
I load data from a flat file into one infocube with delta loading option, and in the related datasource, i chose 'additive delta' option.
However after delta initial and delta update, when I checked cube content, I found that there are 2 records with the same characteristic value (just like duplicated key), and my expectation is to sum key figure with the same characteristic. Who can help me on that?
BTW: when I check delta queue, why there is not any queue?

Ls,
Please do not post same question in both forums - please refer the answers in the other post in the other forum.
Arun

Question for delta loading, why can not update existing record in cube

Hi, Gurus,
I load data from a flat file into one infocube with delta loading option, and in the related datasource, i chose 'additive delta' option.
However after delta initial and delta update, when I checked cube content, I found that there are 2 records with the same characteristic value (just like duplicated key), and my expectation is to sum key figure with the same characteristic. Who can help me on that?
BTW: when I check delta queue, why there is not any queue?

Hi,
In uploading of flat file , If you are able to capture the changes to the previously loaded records, Then you can follow the additve delta. So it decreases the time of uploading .Only changed or new records will be uploaded every time.
If you are not able capture the changes in flat file ,Every time you have to do full upload ,Before this delete the contents of Infocube. (Assuming there is no ODS B/W Infocube and Flat file).
With rgds,
Anil Kumar Sharma. P

How do I correct the error message: Activation Limit reached for creative suite

I have the software loaded on only TWO computers. A desktop computer running Win-XP and a recently purchased Win 8 laptop running windows 8
any help would be greatly appreciated.

Hi Ted,
Welcome to Adobe Community.
This error message would only pop up once we have installed the product on two machine already and trying to get the product installed and activated on a third machine .
I would request you to please connect with the Adobe support team over the phone/Chat and they should be able to provide a solution there and then for you .
Contact Adobe # http://helpx.adobe.com/contact.html
Regards,
Kartikay Sharma

Error while activating the transformation for cube

Hi everyone,
I m working on BI7, & while activating the transformations the system trrows an error saying that 'amount infoobject is not assained' and 'unit of measure is not used' even though I hav assigned both the fields to Amount infoobject.
would plz explain in detail.
Thank you.

Hi,
Are you loading from the Flat File or from ECC?
If you are loading from FlatFile then you have to specify the InfoObject names in the "Template InfoObjects" area in DataSource-->Fields Tab.
Then when you create the Transformation then the Rules will be created Automatically.
Regards,
rik

Error while activating transfer structure for 0MATERIAL_ATTR

I am trying to activate the transfer rules of 0MATERIAL_ATTR, but when activating the process end with the following message:
Error generating program
Message no. RSAR245
Diagnosis
An error occurred in the program generation:
Program / Template:   RSTMPL80
Error code / Action: 6
Row:        1,792
Message:    The data object "P_S_COMM" has no component called
I cannot activate the transfer rules of 0MATERIAL_ATTR and 0MATERIAL_TEXT because of the same problem. Could anyone please help me...
Thanks in advance for your valuable help.
Regards
Carlos España.

Ron Silberstein:
I really appreciate your help, thank you very much.
I saw your profile, and i saw that you are an expert in BI.
Congratulations, your help was very important for me.
CONTINUE HELPING OTHER PEOPLE!!!!! T H A N K S!!
God Bless you.
Regards
Carlos España.

Runtime error when running Init Infopack or delta infopack

Dear All,
I am getting following error when trying to init infopack
Runtime Errors         MESSAGE_TYPE_X
Message class....... "RSM"
Number.............. 000
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Program                                 SAPLRSS1
Include                                 LRSS1F11
Row                                     1,543
Module type                             (FORM)
Module Name                             RSM1_CHECK_FOR_DELTAUPD
And this is happening only with one particular infopack of billing item extractor.
Please help for the same.
Regards,
SS

Hi,
Can you just give more explanation on what you are trying to do, like conditions.
Are doing first time init.
Reg
Pra

Error in activating init flag for delta load

Similar Messages

Maybe you are looking for