Error in activating my email
after activating my blackberry on a particular network, i put in a new sim card in my phone, now each time i try to activate my email, it displays this message.. "your device encountered a problem with this enterprise server" pls how can i remedy this..
Hi and Welcome to the Community!!
With the SIM card of the network that you will be using your BB on in your BB, I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
2) Delete and Resend Service Books
KB05000Delete the service book for the BlackBerry Internet Service email account from the BlackBerry smartphone
KB02830 Send the service books for the BlackBerry Internet Service
3) Batt Pull Reboot
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should contact your wireless service provider for formal support.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
Hi,
When I was simulating the 'eMail Response - Process Message', I had been getting the below error when entering to 'Create activity Process' step.(provided all the inputs per testmode.xml file)
Error running sub-process 'eMail Response - Create Activity' at step 'Create Activity Process'.(SBL-BPR-00183)
I increased the log level to 5 and got the below message in log file
ObjMgrBusServiceLog InvokeMethod 4 0000000251b51f04:0 2013-06-10 01:30:12 Begin: Business Service 'XML Hierarchy Converter' invoke method: 'DocToHier' at 12cc4240
ObjMgrBusServiceLog Error 1 0000000251b51f04:0 2013-06-10 01:30:12 (xmlcnvsv.cpp (548)) SBL-EAI-00246: XML Hierarchy Converter error - empty input message, expecting an XML document in <Value> of input arguments
I was wondering I could not find 'XML Hierarchy Converter' business service in 'eMail Response - Process Message' and 'eMail Response - Create Activity' sub process.
Can any body help me out in this regard.
Thanks in advance..
JagadeeshHi Naresh,
yes, I am using the delete polling strategy. Here is the .jca file:
<adapter-config name="Pozadavky" adapter="Database Adapter" wsdlLocation="Pozadavky.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/DB/PozadavkyConn" UIConnectionName="PozadavkyConn" adapterRef=""/>
<endpoint-activation portType="Pozadavky_ptt" operation="receive">
<activation-spec className="oracle.tip.adapter.db.DBActivationSpec">
<property name="DescriptorName" value="Pozadavky.Pozadavky"/>
<property name="QueryName" value="PozadavkySelect"/>
<property name="MappingsMetaDataURL" value="Pozadavky-or-mappings.xml"/>
<property name="PollingStrategy" value="DeletePollingStrategy"/>
<property name="PollingInterval" value="120"/>
<property name="MaxRaiseSize" value="1"/>
<property name="MaxTransactionSize" value="10"/>
<property name="NumberOfThreads" value="1"/>
<property name="ReturnSingleResultSet" value="false"/>
</activation-spec>
</endpoint-activation>
</adapter-config> -
Error while sending the email notifcation
Hi All
I am getting this error while sending the email notifcation.If any one of you have any idea regarding this please suggest
[2012-09-12T03:55:41.288-10:00] [soa_server1] [ERROR] [SDP-26102] [oracle.sdp.messaging.driver.email] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: OracleSystemUser] [ecid: f5c1f5acbf0bb7a6:22e05768:139ba096e4d:-8000-00000000000006ef,0] [APP: usermessagingdriver-email] Error while writing e-mail message content.[[
java.lang.ArrayIndexOutOfBoundsException: 0 >= 0
at java.util.Vector.elementAt(Vector.java:427)
at javax.mail.Multipart.getBodyPart(Multipart.java:157)
at javax.mail.internet.MimeMultipart.getBodyPart(MimeMultipart.java:256)
at oracle.sdpinternal.messaging.driver.email.EmailDriver.getHeaderEncoding(EmailDriver.java:1079)
at oracle.sdpinternal.messaging.driver.email.EmailDriver.send(EmailDriver.java:670)
at oracle.sdpinternal.messaging.driver.email.EmailManagedConnection.send(EmailManagedConnection.java:50)
at oracle.sdpinternal.messaging.driver.DriverConnectionImpl.send(DriverConnectionImpl.java:41)
at oracle.sdpinternal.messaging.dispatcher.DriverDispatcherBean.onMessage(DriverDispatcherBean.java:296)
at sun.reflect.GeneratedMethodAccessor2553.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy346.onMessage(Unknown Source)
at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:574)
at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:477)
at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:379)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
[2012-09-12T03:55:41.331-10:00] [soa_server1] [WARNING] [SDP-25107] [oracle.sdp.messaging.engine.store] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: OracleSystemUser] [ecid: f5c1f5acbf0bb7a6:22e05768:139ba096e4d:-8000-00000000000006ef,0] [APP: usermessagingserver] Message ID bac38bd50a1f32a129c5c739335a7855 in Status object does not match previously recorded Message ID b7e259a30a1f32a12c981a3ffd343f6d.
[2012-09-12T03:55:41.362-10:00] [soa_server1] [ERROR] [] [oracle.soa.services.notification] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@3066bad4] [userId: <anonymous>] [ecid: 0000Jau4qHj9Lex_w9w0yW1GK6Rn000003,1:32530] [APP: soa-infra] <.> Error status received from UMS.[[
Status detail :
Status type : DELIVERY_TO_GATEWAY:FAILURE,
Status Content : Failed to set message headers: java.lang.ArrayIndexOutOfBoundsException: 0 >= 0,
Addressed to : EMAIL:[email protected],
UMS Driver : Farm_base_domain/base_domain/soa_server1/usermessagingdriver-email:oracle_sdpmessagingdriver_email#Email-Driver,
UMS Message Id : b7e259a30a1f32a12c981a3ffd343f6d,
Gateway message Id : ,
Status Received at : Wed Sep 12 03:55:41 HST 2012.
Check status details and fix the underlying reason, which caused error.
[2012-09-12T03:55:51.492-10:00] [soa_server1] [WARNING] [] [oracle.soa.services.notification] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@3066bad4] [userId: <anonymous>] [ecid: 0000Jau4qHj9Lex_w9w0yW1GK6Rn000003,1:32530] [APP: soa-infra] <.> Could not find notification record corresponding to failed notification : (Channel message id) : b7e259a30a1f32a12c981a3ffd343f6d[[
Hence it will not be retried.
Possible cause could be purging of notification data after sending out notification, but before receiving status.
]]Are you using your email address to send the email notifications if it Is not configured with AD? Have you populated the mail attribute in weblogic console-->realms-->my realms-->users
In addition are you sure you have configured the 'Email Driver Properties' correctly in EM ?? have you specified the Notification Mode to Email ?
Please make sure that the outgoing mail server and port along with the username and password are correct.
Also validate the workflow settings in your EM?
In addition, please validate that when you logon to BPM worklist using the admin account and click on the name for e.g. weblogic, you see the email attribute populated properly.
Thanks
ACM -
Folder name already exists error when activating feature
HI,
I am creating a document library and adding folders to it using elements.xml in VS 2012.
First time deployment of the item works fine, the folder is created. But further deployment or activation of feature from site features is throwing the error "Folder name already exists".
Below is the elements.xml of List Instance, which was modified to add the folders.
<ListInstance Title="TestLibrary" OnQuickLaunch="FALSE" TemplateType="101" FeatureId="Guid" Url="Lists/TestLibrary" Description="TEST Library List Instance">
<Data>
<Rows>
<Row>
<Field Name="ContentTypeId">0x0120004F994A3C0FF76546A528DA0D4B515898</Field>
<Field Name="FileLeafRef">Test_One</Field>
<Field Name="Title">Test_One</Field>
<Field Name="FSObjType">1</Field>
</Row>
<Row>
<Field Name="ContentTypeId">0x0120004F994A3C0FF76546A528DA0D4B515898</Field>
<Field Name="FileLeafRef">Test_Two</Field>
<Field Name="Title">Test_Two</Field>
<Field Name="FSObjType">1</Field>
</Row>
</Rows>
</Data>
</ListInstance>
How to fix this?
ThanksHi,
According to your post, my understanding is that you got “Folder name already exists error when activating feature”.
I had used the following code snippet to create a folder within a document library, it didn’t throw errors when reactive the feature.
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<ListInstance Title="LibTest"
OnQuickLaunch="TRUE"
TemplateType="10000"
Url="Lists/LibTest"
Description="My Lib Instance">
</ListInstance>
<Module Url="Lists/LibTest/Folder1" />
</Elements>
http://shareden.blogspot.com/2012/11/creating-feature-with-image-library.html
Also, when you redeploy the project, it will give you a dialog which would promote to delete the existed list or not.
If you click the “Resove Automatically”, the visual studio would delete the existed list automatically, and create a new list.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support -
Error 1032 on my email configuration
error 1032 on my email configuration
http://www.palm.com/us/support/mobile/downloads/versamail407.html <-- grab this update if you haven't already.
More posts about this error below.
http://search.active.palm.com/?t=SupportCategory&u1=sd&u2=q&sd_smartphone=&sd_handheld=&q=ERROR_NO_M...
Post relates to: Centro (Sprint)
Message Edited by Imaginos on 11-10-2008 02:54 AM -
Error check activation message
Hi there, My instal of Adobe Digital Editions was fine on my Windows 7 machine. I downloaded the getting started book and that is fine. But when I download a ACSE file it gives me the Error Check Activation message.
I've validated my email several times via the cloud.
Any suggestions would be great.
Thanks,
AAdone have many error message check the file and replace whit other
-
Error - Problem sending invitation email
Hi
I am trying to invite a admin user, but i never get an email from BC
This i the error when im resend invitation email :
Error - Problem sending invitation email
Thanks
FinnI am having a similar issue - the email appears to have been created but the activation email was never sent... now we can not remove the busted one or create a log in in a client! - how to repair?
-
Error occured activating decorator Web application decoratio
Hello,
I recently upgraded to eclipse 3.1 (fresh install) and installed build 425 as a plugin.
I imported my projects into this new release and I am getting this weird error on startup : 'an error occured activating decorator Web application decoration'
Has anyone experienced the same issue ?
Could you please provide some hints on how to solve this issue ?
Thanks in advance =)
AnthonyHi,
What OS are you working on?
When you say "upgraded to eclipse.." do you mean extracted eclipse-SDK-3.1-win32.zip/eclipse-SDK-3.1-linux-gtk.tar to a new location?
If possible can you please try the following steps:
* Quit NitroX/Eclipse
* Extract Eclipse 3.1 to a new location
* Install NitroX in a different folder pointing to your new eclipse
* Launch NitroX
- On Windows start > Programs > M7 NitroX >
- On Linux <NitroX_install_folder>/NitroX.sh
* Switch to web perspective (Window > Open Perspective > other > Web)
* Create any of the sample app from New Web App Wizard
* Open JSP/XML files
If you still face the problem, send the following files to [email protected]
* workspace - ..eclipse\workspace\.metadata - .log file
* <NitroX Install Folder>\NitroX\eclipse\plugins\com.m7.nitrox_2.1.0 - m7.log.0 file
* <NitroX Install Folder>\NitroX_InstallLog.log
Thanks,
M7 Support -
Hola a todos
Un favor...
Descargue el adobe Digital Editions y al descargar algunos libros de la web de Adobe me sale una ventanita que dice
Error: Check Activations
Y no logro descargar esos libros y poder leerlos.
Lo unico que si puedo ver son los .pdf que tengo en mi compu.
De antemano, Gracias por ayudarme a resolverlo...
Tengo:
W Vista SP1
Mozilla y Chrome (ultima version)
AvastMuchas gracias Federico, muy amable de tu parte.
Así es, ya vi lo que me comentas y al intentar descargarlos, de hecho no mo
pone el título del archivo. Solo en el primero y el último me los permite
descargar/ver.
Voy a buscar otras webs para ver si encuentro los libros que me interesan.
Gracias nuevamente. Saludos coordiales!
2015-03-13 8:53 GMT-06:00 federico platon <[email protected]>:
error check activations created by federico platon
<https://forums.adobe.com/people/federico+platon> in *Foros de usuario a
usuario* - View the full discussion
<https://forums.adobe.com/message/7290057#7290057> -
Can't upload file - FTP error - file activity incomplete
I'm totally new to Dreamweaver and websites - trying to pick
up and run with a voluntary organisation's website. I have the
public_html folder on my PC. I have set up the 'New Site' within
Dreamweaver; made changes to the index.htm and have tried numerous
ways of 'putting file to the remote site'.
I get the error message as above - FTP error - file activity
incomplete re this 1 file called index.htm.
I have no idea how to trouble shoot this - used a colleague
who successfully uploaded a sample index1.htm, yet when I tried I
couldn't do anything; used my website host technical support but
they don't know Dreamweaver and although they tried various ways
they couldn't help.
Please, is there anyone who can throw some light of what
might be the problem?Hi Eunice,
In your site definition in DW, you set up the FTP parameters.
In the
Advanced tab, check the following:
Access: FTP
FTP Host: Enter the URL of the server, without any
http:// or www
or subdirectories (i.e. just servername.domain )
Host directory: /public_html/
Login: Use your username that you created the site with
Password: Use your password for that account
Select the "Save" and the "Use Passive FTP" check boxes. Then
click "Test".
You should get a message saying "Macromedia Dreamweaver
connected to your
Web Server successfully."
If this doesn't work, then you need to double check your
login information
and your Internet connection.
HTH
Steve
"eunice07" <[email protected]> wrote in
message
news:fgjcjt$73k$[email protected]..
> I'm totally new to Dreamweaver and websites - trying to
pick up and run
> with a
> voluntary organisation's website. I have the public_html
folder on my PC.
> I
> have set up the 'New Site' within Dreamweaver; made
changes to the
> index.htm
> and have tried numerous ways of 'putting file to the
remote site'.
> I get the error message as above - FTP error - file
activity incomplete re
> this 1 file called index.htm.
>
> I have no idea how to trouble shoot this - used a
colleague who
> successfully
> uploaded a sample index1.htm, yet when I tried I
couldn't do anything;
> used my
> website host technical support but they don't know
Dreamweaver and
> although
> they tried various ways they couldn't help.
>
> Please, is there anyone who can throw some light of what
might be the
> problem?
> -
Can't active Internet email account since I hard reset my torch 9800
HI, I did a hard reset lately because I wanted to clear my enterprise email . Since this time, I can't active internet email like Hotmail on my torch 9800. I have the option to activate my old email in the menu "Email Account Activation" but when I try to verify my password I have an error message " Sorry, unable to continue your session. Please log in again," Does somebody know what I can do to activate my old email or a new one?
Jordane
Solved!
Go to Solution.thankssssssss you just save my life it took me 2 days by myself without success despite I did it 3 times before with the old scroll down system.
BillJ wrote:
Yes. You can use Telus's self-serve BIS site from where you can add, delete and edit email accounts for your phone from your PC. You'll have to call Telus to get a user/pass combo but it's worth doing.
Secondly, if you don't want to bother with that option, you can type www.blackberry.com/integrate from your phone's browser. That will get you the same results as the first link I gave to you.
I hope that helps you.
did it 3 times before with the old scroll down system. -
An error occurred activating decorator ...
I am getting this error when I start eclipse. It says "An error occurred activating decorator Web application decoration". I got this before also and solved by un-insalling eclipse and Nitro and re-installing them again. There should be an easier way to solve this problem.
Here is my info:
Nitro: NitroX_JSP_Editor_2.1_425
Eclipse 3.1
Sun JDK: 1.5.0
O/S: Fedora Linux
Any suggestions? Thanks.Hi,
It would be helpful if you can send the following information to [email protected]
* What version of Fedora are you using (Core 2 / 3)?
* Launch NitroX (<NitroX_Home_Dir>\NitroX.sh) and send
- Window > Preferences > Java > Installed JREs - the JRE/JDK version
- Help > About NitroX > Click on Eclipse icon - Version & build id
* workspace - ..eclipse\workspace\.metadata - .log file
* <NitroX_Home_Dir>\NitroX\eclipse\plugins\com.m7.nitrox_2.1.0 - m7.log.0 file
* <NitroX_Home_Dir>\NitroX_InstallLog.log
Thanks,
M7 Support -
Error while activating a routine "no object list"
hi
I am getting a error while activating a routine Rv50c601
"There is no object list for INCLUDEs" Please suggest on the error and resoulution
regards
NishantTry running program RV80HGEN.
Regards,
Naiimesh Patel -
Error while activating transformation ---- Message no. RSTRAN510
Hi,
while I am Extrating Data From Flat File I encountered this Error.
I am working on <b>ECC 6.0 , BI 7.0.</b>
I am trying this one in IDES, it is newly installed server.
For Flat File Extraction I follwed the Steps
1) I created Data source -
let us assume I have created a Flat File with 3 fields
SNO SNAME MARKS
File is located in workstation
Data source created successfull , I have checked in preview.
2) I have created 2 key Figures, 1 characteristic
3) I have created Infocube
<b>here I have some doubt</b>
while I am creating Infocube, the look and Feel is very different to 3.XX
when i try to create in 3.XX , we can see the Tabs for Kef figs,chars,Time chars and we assign chars to Dimenstions.
when i am creating Infocube in BI 7.0 , I don't Find such a Tabs and how I am assign the chars to Dimension
I created Like this
select
Info Area -
> create Info cube -
given name of the cube and create (F5).
the Info cube window displayed on the Right side
Then I did like this
select
key Figures -
> Info object Direct Input
Then I inserted my two key figures SNO,MARKS
--- continue (F5)
Dimension 1 -
> Info object Direct Input
I inserted the 1 char SNAME
--- continue (F5)
Then I saved the Info cube
Info cube saved successfull and activated successfull
<b>Is it Right way For create InfoCube ?</b>
4) I created Transfomation for the Data source
Data source -
> create Transfomation
I have given
Object Type : InfoCube
Name :YSTU - i selected which I already created.
It automaticall taken these parameters
Obejct Type : DataSource
Data source : YSTU
source system :PC_FILE
create Transformation (Enter)
I got the Error
<b>Cannot generate proposal</b>
<b>Message no. RSTRAN017</b>
Then I try to activate, I got the Error.
<b>Error while activating transformation</b>
<b>Message no. RSTRAN510</b>
Before I post this , I had searched in Previous SDN post for this Error , But I can't understand the solution.
I have lot of doubts like <b>Basis Guy need to install any Patch</b> or
I did mistake any where.
Help me to Find the solution...
sure you can get the points
Thanks
prasannaThank You so much Voodi, yes you are Right , I am not concentrated on Mapping, Now Transformation is activated.
and i created Info Package too for the Data source , created successfully.
I am struck on Final step <b>creating DTP</b>
when I am creating DTP
Data Transfer Proc : here I need to give the Dtp name ex: YDTP
DTP Type : Standard (Can be sheduled)
Target of DTP
<b>Object Type</b> : Info cube
<b>Name </b> : YSTU (This is my Cube Name)
Source of DTP
<b>Object Type</b> : Data source (It automatically Taken)
<b>Data source</b> : This is Disabled
<b>Source system</b>: This is Disabled
continue (Enter)
I got the message ?
<b>Specify Name of source</b>
and courser is in <b>Data Transfer Proc </b>
Thanks
prasanna -
i am trying to create a Enterprise Service.the steps that i am following are:
In se80 i am right clicking and then creating a enterprise service.
I am selecting the option as service consumer and then proceeding with the steps.
the wsdl that i am using is https://webservice.test.exacttarget.com/ETFramework-ps-test.wsdl-secure.wsdl
after the steps i am trying to activate the proxy but i am getting the following error:
object not(yet) activated
error when activation a proxy.
P.S i have been able to create a succesful connection in sm59 and i have been able to test the connection succesfullythe repsone i am getting is
Status HTTP Response 200
Status Text OK
Duration Test Call 1104 msHello, did you ever get this working. I am also looking for documentation on setting up and configuring SAP CRM 7 to connect with Exacttarget. Anything you can provide would be very helpful as I am not able to find any documentation on this. Example, exacttarget has sent us a wsdl file but we really don't know what to do with it and they have not provided the documentation related to setup and configuration within SAP.
Thanks,
Doug Thompson
Maybe you are looking for
-
STMS: Transport control program tp ended with error code 0232
Dear ERP Gurus, I just encountered problem with STMS in my PRD system. The import is just stuck up on "tp connecting to database". It won't continue unitl the system gives me this error message: Transport control program tp ended with error code 0232
-
Error in JDBC while using in a Servlet.Please HeLP!!!!!!!
İs there any one can help me I will be very glad. I'm preparing a homework for University and have a small(for me BİİG) problem. I want to make a database connection with servlet . as a full working program I try to use CONNECT.java To Run in a Servl
-
How do I get the URL to "My Photo Stream" (the base one, Not the one I created to share out)?
-
Enhancement for batch master (BATMAS03)
Hi, I've found an extended IDoc ZBATMAS03 (basic type: BATMAS03). It's being used for generating outbound IDOc usiong change pointers. A new segment Z1BATMAS has been added to the extended one. Now I'm not able to find where this segment is being pop
-
Increasing iPhone Speaker Volume - Silly but it works
I was watching a movie on my iPhone and I discovered a simple way to markedly increase the volume of the iPhone speakers. As we all know the iPhone speakers are on the bottom of the unit. When operating the iPhone in the landscape mode the speakers a