Error in Activation of DTP

Hi All,
I am getting following error while trying to activate DTP in full load extraction mode.
Its loading data from DSO to InfoCube.
The error message is -
1-Activation of Objects with Type Data Transfer Process
2-Internal Activation (Data Transfer Process )
3-Post Processing/Checking the Activation for Data Transfer Process DTP_4IHCN8MOFA45L6KTVFRR
4-&
5-**** Error from PSA ****
6-Error when activating Data Transfer Process DTP_4IHCN8MOFA45L6KTVFRRSWHCA
Please guide if anyone has faced this problem before.
Thanks,
Nilesh

this is an authorization problem. your development role is not complete.
search on oss for the missing role; i don't remember it, it's some while ago we had the problem. it was solved after adding the missing role.
M.

Similar Messages

Error while activating the DTP

Dear all,
We are using BI7.00. For one of our reports, the data is transferred from one cube to another cube. When the DTP which transfers the data is activated, the following error appears.
Error from PSA ****
Message no. RSAODS000
Error when activating Data Transfer Process DTP_D5Q7YV8OBC64VH1DG6MY6O0UI
There is no other information regarding this message. I have tried deleting the DTP and re-creating a new one but still problem persists.
Can experts throw light on this?
Regards,
M.M

Hi Magesh,
Please check the below solution:
you can execute the 'RS_TRANSTRU_ACTIVATE_ALL' program for the 3.x InfoSource(s) affected.
SAP NetWeaver 2004s BI
Import Support Package 10 for SAP NetWeaver 2004s BI (BI Patch 10 or SAPKW70010) into your BI system. The Support Package will become available once Note 914304 with the short text, "SAPBINews BI 7.0 SP10", which describes this Support Package in more detail, is released for customers.
To provide information in advance, the note mentioned above may already be available before the Support Package is released. In this case, however, the short text will still contain the words "Preliminary version".
Note No: 968504
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=968504
With Regards,
Ravi Kanth

Error while activating DTP : database returned a value containing an error

Hi ,
I am getting an error as "The database returned a value containing an error"
while activating the DTP. Can neone suggest any solution for this error .
The system is also not allowing to delete the DTP and giving the same error as above one .

Are you receiving a similar error as below from the log:
Creation of PSA /BIC/B0001995 failed
Error during creation of DDIC sources of Data Transfer Process DTP_4DGGKC0NCCP394FEOOSQC68Y3
If yes then look into SAP Note 1145673 - Extracting from InfoProviders with navigation attributes. Application of this note should resolve the issue.

Error while activating DTP in BI 7.0

I am facing an error while activating DTP between a ODS and CUBE.
I have converted 3.x update rules and transfer rules to 7.x transformation. Enhancements were carried out on the data source as well. All the objects and transformations were activated. While activating the DTP between the ODS and CUBE i get an error message saying:
"Creation of PSA /BIC/B0000XXX failed.
Error during creation of DDIC sources of Data Transfer Process DTP_<Request Number>
Error when activating Data Transfer Process DTP_<Request Number>"
I have come across a OSS note, 954574, which is relavent to SP09. But we have SP17 installed on our server.
Any pointers on the same would be of great help.

Hi Rupesh,
Chk these links they may help you
http://help.sap.com/saphelp_nw70/helpdata/EN/43/fa2f42e8fc6befe10000000a11466f/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/44/03a25c0bbe025ce10000000a1553f7/content.htm
Regards,
RK

Error when activating DTP

Hello,
I hv a ZCube which contains some data..now due to some requirement I changed the Transformation activated it & transported Transformation & cube from Development to Production server..
I tried activatingf DTP on production itself but it is giving following errors:
-> &
-> Error when activating Data Transfer Process DTP_4CGR11XLGUTZDF62I40GFEJE3
plz tell how to activate??
Thanks
-Shilpi

Hi Shilpi,
there are several correction notes regarding DTP on this SP level, please try note 1151263.
Please also look into the transport log, expand it, and to see if there should be any other information.
please also try RSDG_AFTER_IMPORT_FOR_CORR according to 411574 to try re-import.
There might be some inconsistency for PSA table, please run RSAR_PSA_CLEANUP_DIRECTORY to check.
Thanks & B.R.
Vince

Error when activating DTP for InfoCube

Hi
I encountered an error '**** Error from PSA ****' 'Error when activating Data Transfer Process DTP_436DF8XYKE2Y97CUX9W7FM0JH' while trying to activate the DTP for an infocube. Does anyone know why this happens and how to fix it ?
I'm on support pack 9 at this moment.
Many thanks,
Anthony

Hi Gnana
Thanks for your reply. Yes, I had already created the transformation for the bespoke cube, checked, saved and activated it without any error. Next, I created the DTP for this cube. Checked it and there wasn't any error. However when I activated it, I received that error message. I didn't get this error when I activated DTP for DSO and master data infoobject.
I have deleted and created the DTP like 5-6 times and still faced the same error message.
Prior to applying support pack 9, I didn't get this error message. Now that I did and also applied the collective OSS note 978148 (BI in SAP NetWeaver 2004s: OSS notes after SPS9), I received this error message.
Regards,
Anthony

Error when activating DTP in

hi guys
I am trying load one ods to another ods . and when I create DTP and try to activate it throwing some weird message like
Creation of PSA /BIC/B0003852 failed
Error during creation of DDIC sources of Data Transfer Process DTP_4B6GPTZCLXHMKF405417M6KEX
Error when activating Data Transfer Process DTP_4B6GPTZCLXHMKF405417M6KEX
I donu2019t know what is this Causing error ..my source dso is correct has data ..but unable activate this ..
Any clue ?

Hi,
I think you have to create export datasource for the first DSO and then check creating the DTP.
Hope this helps..........
Rgs,
Ravikanth.

Error while activating transformation ---- Message no. RSTRAN510

Hi,
while I am Extrating Data From Flat File I encountered this Error.
I am working on ECC 6.0 , BI 7.0.
I am trying this one in IDES, it is newly installed server.
For Flat File Extraction I follwed the Steps
1) I created Data source -
let us assume I have created a Flat File with 3 fields
SNO SNAME MARKS
File is located in workstation
Data source created successfull , I have checked in preview.
2) I have created 2 key Figures, 1 characteristic
3) I have created Infocube
here I have some doubt
while I am creating Infocube, the look and Feel is very different to 3.XX
when i try to create in 3.XX , we can see the Tabs for Kef figs,chars,Time chars and we assign chars to Dimenstions.
when i am creating Infocube in BI 7.0 , I don't Find such a Tabs and how I am assign the chars to Dimension
I created Like this
select
Info Area -
> create Info cube -
given name of the cube and create (F5).
the Info cube window displayed on the Right side
Then I did like this
select
key Figures -
> Info object Direct Input
Then I inserted my two key figures SNO,MARKS
--- continue (F5)
Dimension 1 -
> Info object Direct Input
I inserted the 1 char SNAME
--- continue (F5)
Then I saved the Info cube
Info cube saved successfull and activated successfull
Is it Right way For create InfoCube ?
4) I created Transfomation for the Data source
Data source -
> create Transfomation
I have given
Object Type : InfoCube
Name :YSTU - i selected which I already created.
It automaticall taken these parameters
Obejct Type : DataSource
Data source : YSTU
source system :PC_FILE
create Transformation (Enter)
I got the Error
Cannot generate proposal
Message no. RSTRAN017
Then I try to activate, I got the Error.
Error while activating transformation
Message no. RSTRAN510
Before I post this , I had searched in Previous SDN post for this Error , But I can't understand the solution.
I have lot of doubts like Basis Guy need to install any Patch or
I did mistake any where.
Help me to Find the solution...
sure you can get the points
Thanks
prasanna

Thank You so much Voodi, yes you are Right , I am not concentrated on Mapping, Now Transformation is activated.
and i created Info Package too for the Data source , created successfully.
I am struck on Final step creating DTP
when I am creating DTP
Data Transfer Proc : here I need to give the Dtp name ex: YDTP
DTP Type : Standard (Can be sheduled)
Target of DTP
Object Type : Info cube
Name : YSTU (This is my Cube Name)
Source of DTP
Object Type : Data source (It automatically Taken)
Data source : This is Disabled
Source system: This is Disabled
continue (Enter)
I got the message ?
Specify Name of source
and courser is in Data Transfer Proc 
Thanks
prasanna

Error while activating the datasource during migration

Hi Guys,
When we were trying to migrate the datasources from 3.x to BI 7.0, we are encountering an error with the activation of the datasource. The datasource itself has been migrated but the ativation log gives and error
Error in activating the datasourc----RSO404
Has anyone encountered this issue? Your input is highly appreciated.
Regards,
Doniv

Voodi,
Thanks for the response but the note talks about deletion of the DTP causing the errors. Moreover we are already on SP 13. Any other ideas?
Doniv

Error while Activating the Standard DSO

Hi,
I am getting the below error while Activating the Standard DSO.
Characteristic 0DPM_DCAS__0CSM_SPRO: DS object 0DPM_DCAS__0CSM_STAT (master data check) does not exist
I tried searching the forum , but didnt find any answer.
Any suggestions are welcome.
Thank you,
Adhvi.

Hi,
Are you getting the error while trying to activate the DSO data after loading or just while trying to activate the DSO itself.
If it is during the activation of a request,then please check if you have loaded some data in the DSO which doesnt have the corresponding Master Data loaded.For preventing this, you can check in Infopackage/DTP -"No Update without Master Data".
You can also go into RSRV and perform elementary tests for the DSO and check the SID table consistency.
Thanks,
Divya.

Runtime Error when activating Comp Records

When trying to activate IT 0759 records in Comp to update Basic Pay, some employees received a Runtime Error. It states, "The exception CX_HRPA_VIOLATED_POSTCONDITION was raised, but it was not caught anywhere along the call hierarchy."
It says it was not caught in 'HR_ECM_INSERT_INFOTYPE' function.
Has anyone else seen this problem? It didn't happen for all employees.
Thanks!

Hi guys,
Another reason for locked SPO's is:
The terrible attribute-change-run (ACR). When you try to activate a locked SPO, you only get a message like this:
Runtime Lock: Activity ACTIVATE_SPO, Object DATATARGET ZZZ
Unable to lock the semantically partitioned object
Error when activating Semantically Partitioned Object ZZZ
NO DTP request is running, so you can take all the day trying to find the error.
So in my case, there was an incomplete ACR (cancelled with error - red).
It's like a curse. It is not easy to find the relation between ACR an SPO activation process (SAP error message is not useful to identify the reason)
Finally, keep in mind:
Check any DTP request running or cancelled that affect your SPO model and
Check if you have an ACR (running or cancelled). This can lock your SPO object
regards!

Error transport, when the DTP is implemented in Process chain

Dear all,
we are facing with a problem: when a DTP is already implemented in a process chain, the tranport of that depending transformation will get an error (return code 8) with message like this:
"Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Aktivierungs
Transformation 04QJHDX7E941CZLCQDNNO6FQX06GB61B deleted in version M of DDIC
Action canceled
The user terminated processing of objects
Impact analysis of Transformation 04QJHDX7E941CZLCQDNNO6FQX06GB61B
The user terminated processing of objects
Error when activating Transformation 04QJHDX7E941CZLCQDNNO6FQX06GB61B
Dependent object DTPA DTP_049H3XG5UDOXUJ5RG44W3JN30 set to inactive
If we deleted the DTP in the process chain first, then reimport the transformation, the transport will be succesful. But that is not really the solution, isn't it? What is here the phenomenon? Do we need some setting else or is there any SAP notes for this?
Thanks a lot for advise!
Van Anh Nguyen

Hi,
sorry that I may not be clear in my explaination. The Scenario is below:
- we create a transformation in C
- transport it to Q and create there DTP and process chain. It works well for a long time.
- then change something in transformation in C due to an enhancement
- try to transport transformation to Q, but it failed. Transformation inactive. DTP inactive.
- try again by deletion DTP in PC (in Q)
- reimport transformation again --> that works. Transformation transported and active in Q. But DTP lost and we have to re-create it in PC.
Question: is there any method to avoid the step of DTP-deletion ? Thank you!
Van Anh

Error while executing a DTP

Hi All ,
I got an error while executing a DTP. Short Dump analysis points this error. : DBIF_REPO_SQL_ERROR.
Please provide in your valuable inputs to resolve this error.
Thank & Regards,
Rohit Garg

This error comes majorly when you have a deadlock in your code. Check ST22 if you have any short dump corresponding to it and see the source code where it is getting stuck.
If you find this dump explaining table space issue, then contact Basis, they will be able to help you with table space problem.
Edited by: Deepmala Agarwal on Aug 18, 2009 7:40 AM

Error while activating a routine "no object list"

hi
I am getting a error while activating a routine Rv50c601
"There is no object list for INCLUDEs" Please suggest on the error and resoulution
regards
Nishant

Try running program RV80HGEN.
Regards,
Naiimesh Patel

Error while activating proxy

i am trying to create a Enterprise Service.the steps that i am following are:
In se80 i am right clicking and then creating a enterprise service.
I am selecting the option as service consumer and then proceeding with the steps.
the wsdl that i am using is https://webservice.test.exacttarget.com/ETFramework-ps-test.wsdl-secure.wsdl
after the steps i am trying to activate the proxy but i am getting the following error:
object not(yet) activated
error when activation a proxy.
P.S i have been able to create a succesful connection in sm59 and i have been able to test the connection succesfullythe repsone i am getting is
Status HTTP Response 200
Status Text OK
Duration Test Call 1104 ms

Hello, did you ever get this working. I am also looking for documentation on setting up and configuring SAP CRM 7 to connect with Exacttarget. Anything you can provide would be very helpful as I am not able to find any documentation on this. Example, exacttarget has sent us a wsdl file but we really don't know what to do with it and they have not provided the documentation related to setup and configuration within SAP.
Thanks,
Doug Thompson

Error in Activation of DTP

Similar Messages

Maybe you are looking for