Error in Activation of ODS Data

Dear All,
I am getting this error msg while activating ODS Data, It says its not able to execute one of this statements while activation
Program Name: GPBUJ6PU7X5TA8TLJSDOPVSU2Z7
The program terminates at this line
Types corresponding to Change-Log-structure
l_s_chgdata TYPE /BIC/B0000103000,
The DDIC does not have an table name by /BIC/B0000103000 which the program is trying to refer, Kindly do provide me your help and input on this.
Thanks.
Fayak.

Hi Siggi,
Thnx for your reply, I did as suggested by you, activated the ODS and update rules again but it was not able to activate the data again I ran the RSRV as suggested by you i got an list of errors
Test for Activation Program
Active generated load program not available
Activation Program is not Current
Lines in temporary program: l_s_chgdata TYPE /BIC/B0000103000
Activation program has to be generated again
I ran the correct error but not to any avail, could you kindly guide me on this, I was previously loading data to this ODS successfully from a 300 client now I am trying to do this from an 400 client and I am facing this error.
Thanks,
Fayak.

Similar Messages

Error during activation of ODS data

Hi all,
I am getting error during activation of ODS data.
Error: Error occur during activation.
How to check , where that error exactly occurs.
Appreciating any response.

Hi Santosh,
SM37 is mainly for monitoring the back ground jobs...... both in R/3 side and BW side this is same.. just for monitoring the background jobs... fisrt by using SM36 basis people will schedule in background.. and we just identify.. which are completed and which are not completed... in SM37.
there are various status they are
PLANNED
RELEASED
CANCELLED
ACTIVE
FINISHED
READY
Check this link
http://help.sap.com/saphelp_nw04/helpdata/en/c4/3a8016505211d189550000e829fbbd/frameset.htm
In Sm37 u can see the different options for background jobs, like Scheduled, released, ready,active, finished, canceled.. If u want to know the Status of the current running job, U just type the job name, user name then click execute(F8).
hope this helps
regards
Karthik
Assign points if helpful

Error Activating the ODS data

Hi Guys,
I am facing an error while activating the data in the ODS.
The data is loading perfectly fine but when activating the ODS data the following error is coming
Request REQU_3ZI9CZ369HR6SM49OL9ULRVKM, data package 000031 incorrect with status 5 in rsodsacstreq
System error occurred (RFC call)
No confirmation for request ODSR_3ZI9DUVOMM02L1I777X5YX9QU when activating the ODS object PA_ODS1
There is no PSA for InfoSource 8PA_OA001 and source system BWPCLNT641 ( The data laod is without PSA )
This is happening after we had a BWQ refresh .
I thought this has something to do with the BASIS guys but they say they checked everything.
Need Help

Hi Sidhu,
There were red requests in the ODS but I deleted them and tried activating the green requests , even when there are only 4 records it is not activating the data.
I checked the RESREQDONE table but I dont see these requests in there.
I checked the SM58 there I saw a lot of errors
ALEREMOTE RSAR_TRFC_DATA_RECEIVED BWQCLNT641 10/17/2005 18:50:48 ERROR REQU_3ZHNIS265F9F6HJQ8PY838046 PG# 21 In BW
one line in that is this . can u throw some thought on this. when I try to execute this LUW it says that function module RSAR_TRFC_DATA_RECEIVED doesnot exist or exception raised message. I got these yesterday but today I got only one and when I executed that LUW it gave me the same message but that error message is not showing now
Regards
Majeed

Error while activating the ODS (high priority ticket)

Hi BW guru's
I am facing major issue while activating the ods i am getting this below error.
Request REQU.....,data package 000002incorrect with status 5
Request REQU.....,data package 000001 incorrect with status 5.
If any1 has come across this issue pls help me out .
I will reward the points surely.
Cheers,
Rakesh

Hi,
ODS activation error
Re: ODS Activation Failed with Status 5
ODS activation is failing with incorrect with status 5 erro
Re: Error Activating the ODS data
ODS Activation error
Regards,
San!

Error Wjile activating the ODS

Hi Gurus,
I am facing an error while activating the ods please find the message shown in the job log .
Request REQU_74JUNZ5CM70EWN1XKSP0W5KWI, data package 000024 incorrect with status 9 in rsodsacstreq
Request REQU_74JUNZ5CM70EWN1XKSP0W5KWI, data package 000025 incorrect with status 9 in rsodsacstreq
Request REQU_74JUNZ5CM70EWN1XKSP0W5KWI, data package 000026 incorrect with status 9 in rsodsacstreq.
Please suggest how to activate the ods,
Regards,
Vikram

Hi Vikram,
Check data in Data Package 24,25 and 26 there is error in some of the data. this u will find Details tab.
Delete the request from the ODS and
then EDIT the data in PSA and load the data in the ODS again.
then Activate it.
Then it wont fail.....prior to these find the records for which the activation is failing....so that u can edit in PSA.
Thanks,
Nagesh.

Error while activating 0FIGL_O02 ODS

Hi ,
It showing error while activating 0FIGL_O02 ODS .I have already allowed all special character "ALL_CAPITAL,.<>?/:;"{}[]||=-)(*&^%$#@!~`"'-_,ALL_CAPITAL_PLUS_HEX",but it's still showing error in particular field 0DOC_HD_TXT .
Errror:Value 'AMITBHANDARKAR ' (hex. '41004D00490054004200480041004E004400410052004B0041
Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0DOC_HD_TXT
What is the error in this name.

Hi rajesh ,
While activation and creating the SIDs the system will perform the sanity check which will ensure to throgh th error if u trying to load some lower cse letter to IO which doent have the u lowercase check box as checked. You can edit the IO then and also proceed with saveen suggested by processing all capital.
Thanks,
Deepak

Error when activating the master data

Hi
I am getting the following error when activating the master data. when using IDOC as transfer method in transfer rules
Error while creating table 'EDISEGMENT' entry '/BIC/CIRB0CLASS_NUM_TEXT'
If anyone came across this kind of problem plz share the solution.
Regards
Annie

Hi
I solved the problem. AFter changing from PSA to IDOC, i just saved first and activated. it got activated. But thanks for the response.
There are no short dumps in ST22
Regards
Annie

Data Laoded successfully, giving error while activating the ODS

Hi,
Process Chain is running daily for loading and activating the data into the ODS.
Today the data loaded successfully but the data is not getting activation. I then tried to activate the data manually but still it not trying to get activated.
I check it the Status tab, it is also giving the same Procedure to activate the data manually.
I checked in the Details Tab. It is displaying Errors as :
1. Error getting SID for ODS.
2. Task 0049 for parallel SID assignments terminated with errors.
3. Activation of data records from ODS terminated.
4. System error occured (RFC call)
Please any one help in this issue.
Thanks & Regards
Jagannadha Raju

Hi,
This is probably because you loaded transaction data before master data and tried activating it.Load the relevant master data, perform the change run and retrigger activation.
It should work.
Else there is a workaround. You can try editing out/blanking out those values in PSA and loading and activating. This will work.
Also try repairing the ODS object in RSRV.
When you activate multiple requests tick the activate serially check box.
thanks,
JituK

Error in Data activation for ODS data load

We were succesfully loading data (delta load) so far for a CRM ODS. Suddenly, yesterday we are getting am error while trying to activate the data. - "No data packet numbers could be determined for request REQU_48C2T4S91I6GSJ4FNUE727M1Y- Message no. RSAODS119".
We could not even see the data in PSA.
Any clues why this would have happened? tRFC issue?
Thanks for your ideas/
Regards
Raj

Hi,
What happens is data packets gets distributed across different Instances/Application Servers.
To distribute users equally on SAP Instances check SMLG Transaction and to distribute RFCs equally on SAP Instances check transaction RZ12
To assign specific BW Instance enter the instance in target system settings. In different source systems different fixed target instances can be assigned.
Check Transaction RSCUSTA2 for load balancing for activation of ODS Object data.
Hope it helps.
Mona

Error while activating the ODS

Dear Experts,
Please help me out,
I am facing one problem while activating the ODS of 0FIGL. Data is uploaded successfully into the ODS but while activeting the ODS, it gives the following error message :
Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0DOC_HD_TXT
Value 'SWITCH 24 PORT MANAGED -I' (hex. '00530057004900540043004800200032003400200050004F00') of characteristic 0DOC_HD_TXT
SID determination finished for InfoObject 0DOC_HD_TXT
I have also read out all the related post & also applied them in this but still the position is same.
also in RSKC, all the characters are allowed.
please suggest.
Thanks in advance
Neha
Process 000090 returned with errors

Hi,
Pliz go thru below article for restricting Invalid chars.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0afbb81-f219-2c10-4181-b20f6b10e373?quicklink=index&overridelayout=true
It might give u an idea or solve your issue.
Thanks,
Jitender.

Error while activating the ods ( prod.issue)

Hi BW guru's
I am facing major issue while activating the ods i am getting this below error.
Request REQU.....,data package 000002incorrect with status 5
Request REQU.....,data package 000001 incorrect with status 5.
If any1 has come across this issue pls help me out .
I will reward the points surely.
Cheers,
Rakesh

Hi Rakesh
The error message
"Key value exists in duplicate (not allowed by the ODS object type)" in the snap you sent, means you set the ODS for unique records. Thats why its not allowing a second with the same value, which is already in the ODS.
Please check your ODS settings, if 'Unique Data Records' is checked or not.
Sorry for my late response!
Regards
GSK

Error while activation of ODS Object.

Hi,
I have loaded the data from R/3 to a ODS Object and the activation of ODS failed due to the following errors as shown below..
-Value '20060 ' of characteristic 0CALQUARTER is not plausible
-Error when assigning SID (details in long text)
-Activation of data records from ODS object ZODS_02 terminated
-Error getting SID for ODS object ZODS_02
I could see that Calendar Quarter as 20060 in table /BIC/AZINV_O0240. There is a calendarday mapped to quarter and year in update rules of ODS object. How the calendar quarter is populated in update table in BW. How should i get rid of this error. Any idea would be appreciated.
Regards,
Raj

don't post same issue twice. Bhanu working on your thread.
check this ...
Raj,
you are getting this calender qurter from SAP right... check in RSA3 fro the your Datasource. if you are getting same value like '20060'. you can do one thing... you can set 'No Update' in Transfer Rules. you can write a routine in Update Rules for populating the data for calender Week.
you can call some standard function modules or you can write a small routine. If you want to write a routine check this thread...Re: Date to Quarter
Possibilites:
1. updtae rules
2. if RSA3(PSA) shows the value of the Quarter as '20050', if it is custom extractor(Generic using FM) you can change this.
3. If it is Standard Extractor or Generic Extractor (using either view/table or Infoset) you can enhance this. you can do the same thing in SAP Side.
All the best.
Regards,
Nagesh Ganisetti.

Error in deletion of ODS data

Hello Gurus,
We have three ODS's in our project to which we will do daily loads.
Before full upload we will delete all the present from the ODS's. The deletion process we will do automatically using process chains.
It was working fine. but from the past week we are getting an error while deleting ODS data. ITAB_DUPLICATE_KEY - Error, Please explain me why we are getting such error and how to rectify it.
We tried to delete the requests manually one by one from ODS.
The data is deleting from the Active table but still it is showing that request in the Manage screen of ODS.
How to rectify this error. kindly give me some inputs.
Regards,
Ala.

Hi,
In the BW server you can try one of the report program to delete the entire requests in infocube or ods.
Report program is RSDELPART1
Just run this report program in se38.
In the selection screen of the program,give the name of the data target from where you need to delete all the existing requests.
This technique was once used.
Please let me know whether it works.

Error when activating Real Time Data Source

Hi..
I created a generic datasource in R/3 system via RSO2, with the Real-time check box enabled in the settings for Generic Delta. I saved the datasource. Replicated it into BW System.
I tried to activate this Real time Data Source in BW, it says "Error when activating Data Source".
I am on BI 7.0, with PI_BASIS: 2005_1_700.
Please let me know if you need any further information.
Thanks,
Sai.

Hi sai,
Can you specify from where you have created your geneic data source like by using DB tabl/view/infoset query.
am

Error while activating the ODS "Request No longer Exist in ODS".

Hi All,
I had deleted one request from four ODS's before completely loaded from R/3. Now when i am trying to activate from one of them using process chain it is giving me the error massage "Request No longer Exist in ODS".
But when i am manually activating this it is not giving me any error.
Please suggest solution for the same.
Regards,
Rohan Shah

I had deleted one request from four ODS's before completely loaded from R/3.
Before deleting the request make QM status red and then delete.
when i am trying to activate from one of them using process chain it is giving me the error massage "Request No longer Exist in ODS".
Already you have deleted the request. How can you activate the same request?
Have you loaded the data again?
With Regards,
Kishore.
Edited by: Siv Kishore on Apr 22, 2009 3:58 PM

Error in Activation of ODS Data

Similar Messages

Maybe you are looking for