Error in activation of update rules.

Hi,
I get an error - 'IC=0PP_C02 IS=2LIS_04_P_MATNR error when checking the update rules' while activating the update rules in BI content. Rest all the data flow is activated except update rules.
Can anyone throw some light on this?
Thanks & Regards,
Manisha

Hi ,
Check the update rule.
In that there are two routines.
In the first one Goods being processed & 2nd one as well , there is syntax err.
/BI0/APP_O010 doest exist.
Mostly it is fetching some data from some dso in this routine.
So it should be activated.
Then update rules will be activated.
Regards,
Devina

Similar Messages

Error while activating the update rules related to Inventory

Hi,
In standard Cube 0ic_c03, I am including a field 0MAT_DOC that is available in the transfer rules of 2lis_03_bx. And when I include that info object in the cube my update rules are getting deactivated.
When I try to activate the update rules, I am getting the following error message:
1. InfoSource 2LIS_03_BX is only set up for the initial run for non-cumulatives.
2. IC=0IC_C03 IS=2LIS_03_BX error when checking the update rules.
Requesting you to please guide me on how do I go about solving this issue.
Thanks & Regards.

Hi Ganesh,
For implementation of inventory in the BW side, first you need to carry out following steps sequentially:
1. MCNB: Filling set up tables for initial entry of stock balances from 2lis_03_BX
2. OLI1BW:Filling set up tables for stock movements from 2lis_03_BF.
3. OLIZBW:Filling set up tables for inventory revaluations from 2lis_03_UM
Check the Business content cube 0IC_C03.
Also check the document how to inventory management.
For report install the business content report for the cube 0IC_C03 and check it.
check this link for inventory
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Regards
Pcrao.

Error in activating the update rules

Hi All
I am getting an error while activating Business Content update rules.
I have activate Cube and corresponding InfoCube and was trying to select update rule for the Cube and installing it.
It however gives an error saying Update Rules (Technical Name) are not found.
Anyone encountered this in the past.
If yes let me know the remedy
Regards
PB

Hi P B,
This might be a long shot, but I still want to see if I can be of any assistance:
Have you encountered SAP note 789272 and SAP note 787875?
They should be contained in SP 19 for BW 310, and your errors do resemble those we encountered, albeit using a different version of BW. These notes are relevant for both mine and your version.
Otherwise, I'll gladly have a look at your error messages you can send over here.
Best Regards,
Daniel

Error while copy of Update Rules from ODS 0SD_O03 to InfoCube 0SD_C13

Hi all,
I work on a NW04s SPS9 System I would like to simply copy Update Rules (from an ODS to an InfoCube) from the BCT to the 1:1 Z-Copies of these Objects.
To do so, I copied the InfoProviders 0SD_O03 and 0SD_C13 to Z-Versions. In SAP BCT the InfoCube is updated from the ODS. The ODS itself is updated from InfoSource.
After successfully copying the two InfoProviders as next step I tried to copy the Update Rules from the Content version Objects to the Z-Version Objects to link them.
Similar to copying update rules in 3.5 I tried
- right click on "ZSD_C13"
- choose Additional Functions - Create Update Rules"
- choose DataSource: ODS Object "ZSD_O03"
- choose Copy from: InfoCube "0SD_C13"
This result in the error "0SD_C13 is not suitable as a template for copying update rules".
Some hints that might help:
1. The very same error occurs if I try to copy the Update Rules from 0SD_O03 to 0SD_C13.
2. I also tried to copy both Update Rules (to C12 & C13) on a BW 3.5 system where it worked fine: The update rules from both Z-ODSs to both Z-Cubes were copied correctly 1:1 and without any errors.
3. In the NW04s System I was able to copy the Update Rules from the InfoSource 2LIS_11_VAITM to 0SD_O01 (as well as from 2LIS_11_VAHDR to ODS 0SD_O03). So I only cannot copy Update Rules from ODSs to InfoCubes while it is possible to copy Update Rules from InfoSources to ODSs.
4. During copy of 0SD_O03 the system warned: "InfoObject 0FISCVARNT needs to be in key for DataStore object ZSD_O03". No matter whether I move this IO to the keys of the Z-ODS, the Update Rules copy does not work.
- This warning does not show up on BW3.5 when I copy the very same ODS. Can anyone explain this?
- This warning is not displayed during the copy of ODS 0SD_O01, just for 0SD_O03.
5. Obviously during a preceding test I actually must have been able to copy the Update Rules for another copy of 0SD_C13 (as I can see the Update Rules in the SAPGUI). I stopped this first test as I was not able to do the Update Rules copy for 0SD_C12.
Yet as of today I cannot copy Update Rules this for both cubes 0SD_C13 as well as 0SD_C12. So yesterday there was no error on copying the Update Rules to InfoCube ZSD_C13, but today there is. To my knowledge nothing has been changed in the System Setup / Customizing in the mean time.
6. For both cubes ZSD_C13 as well as ZSD_C12 it is possible to copy Update Rules that map from the BCT ODS to the Z-InfoCbes. So I can copy Update Rules from 0SD_O03 to ZSD_C13 and from 0SD_O01 to ZSD_C12. This would point in the direction that the copied ODSes are the source of this behavior?
I am not sure whether this is a special NW04s behavior and how to use it correctly so the Update Rules can be copied.
Please could you help on how to copy these Update Rules in NW04s or share your experience if you had similar?
Thanks a lot,
Werner

Hi Vinod,
Check the update rules for the original cube. Are they active? It appears that they contain a formula...check this too.
Hope this helps...

Error installing business content update rules

Hi,
I'm trying to install the below updates rules from the business content
0PLANT$T 0PLANT_TEXT 53AFFWD74OI3CT3RDE3RI9THU
0PLANT 0PLANT_ATTR 5UZVD7UWYN4T81H24YBKGH6KY
I get the error
IC=0PLANT$T IS=0PLANT_TEXT syntax error: rows 0
Long Text:
IC=0PLANT$T IS=0PLANT_TEXT syntax error: rows 0
Message no. RSAU466
Diagnosis
When generating the update program for InfoProvider 0PLANT$T, InfoSource 0PLANT_TEXT, a syntax error in line 0.
System Response
The update rules cannot be activated.
Procedure
If error message :
is cut off, proceed as follows to get the complete complete error message:
Go into update rule maintenance, choose Extras -> Display Activated Program and perform a syntax check. This allows you to find out what the error is.
If I select the Display Activated Program it says does not exist.
Can anyone help me figure out this issue?
Thanks

We are currently on SAP EHP 1 for SAP NetWeaver 7.0
SAP_BW Release 701 Support Package SAPKW70107
BI_CONT Release 705 Support Package SAPK-70501INBICONT

Error Regarding transport of update rule

Hi,
while transporting the object to test server
i am getting the error .object is transported to test
but not in active state .
Regards
upen

Hi,
The following options can be tried:
1)Try to transport the cube once again with option "before data Target" and manually collectinng all the objects.
2)Transport the Update Rules once again
3)Activate directly once again in Test system.
Hope this helps.
Venkat

Error while Installing the update rules in business content

Hi All,
I got the following error,when i was installing the update rules : Object UPDR D4C8V3KA00XD5ANPVUAH9KQDJ could not be found in version M. but these update rules appear as inactive mode in bi content-object types-updaterules-selection-inactive status.
Please could i know where we can check version status for business content pdaterules. but it was showing NOT FOUND IN Version M .
please anybody can help me for solving this error.
i will asign points for your inputs.
regards,
kumar.
Edited by: kumar kumar on May 20, 2009 5:58 AM

Hi,
You can check the Content Release and Last Content Modification for your update Rules following thee given path:
RSA1>BI Content>object Types>Update Rules>Select object(search for ur update rules) -->Transfer Selections.
After they are being transfered to the right pane.On right pane (where you can see the its technical name) scroll towards right you will see last three tabs as "Content Release,Last Content Modification and Person responsible".
Change the Grouping as "Before and afterwards" and then try installing.
Hope it helps.

Conversion exit error while activating the transfer rules

Hello gurus,
We are doing a function module extraction with 3.X data sources.
On activating the transfer rules , i am getting a conversion exit error for "0fiscyear", but in the infoobject we don't have the conversion exit for it.
Points will be awarded for any kind of response.
Thanks and Regards,
Anu.

Hi,
1. Please check in the transformation, its necessary to provide the fiscal variant mapping as well when ur mapping fiscal year object. as on the basis of that value fiscal period will be derived.
2 I guess ur doing direct mapping (Time conversion) and there is no routine written for that. if any u can check that as well for any error.
Thanks
dipika
Edited by: Dipika Tyagi on Jun 25, 2008 7:39 AM

Error while maintaining the Update Rules for the Infostructure

Hi,
I have added 2 new characteristics for the existing infostructure S9xx and executed the same. While maintaining the Update Rules for the same, system is giving the error message 1. "Field 'PARVW' unknown" and 2. Error generating program RMCX0011.
Please guide me in resolving the issue.
Thanks & Regards,
Kumar.

Hi,
This is with reference to my earlier question that an error is occuring while maintaining the update rules for the existing Infostructure.
Solution provider for this will be rewarded with good points.
Regards,
Kumar.

Activation of update rule :Help Required Urgently!!

Hi
I am not able to activate an update rule from an ods to cube.
In the start routine I am populating ITAB with amt when I add the following code in the update routine for amt :
READ TABLE ITAB WITH KEY RECORD_NO.
RESULT = ITAB-AMT.
I am unable to activate and get the to check error.
the data object 'g_s_kb' does not hav a component called /bic/bspart
The object specified in the error was earlier present in the comm. structure of the infosource (ZT_RPM_ITEM_D) which loads the ods ZRPM_OA1
I am getting this error in the update rule of the cube which I am updating from this ods.
When I encountered this error I removed that info object ZBSPART from the comm. structure.
It is not present in any of the objects now. Also I had recreated both the update rules after I removed that info object from comm. structure.
Kindly provide pointers to the same.

Hi,
Yeah the object was initally itslef only in the comm structure which i deleted
After deleting it i deleted both URs and recreated them
Still gegtting the issue....
Please provide any leads to this strange problem!
Thank you,
Regards,
Rathy

Run time error while activating the Transfer Rules

Hi,
Error when activating Transfer rules for Infosource :
0FI_GL_1 -
(General ledger: Transaction figures)
Run time error : ASSERTION FAILED
Transfer rules traffic light is in Green. But when i am trying to activate the Transfer rules, its giving Run time error.
Thanks,
Kishore

Hi,
As mentioned in the note 939383 , either Import Support Package 08 for SAP NetWeaver 2004s BI (BI Patch08 or SAPKW70008) into your BI system or do correction instructions given in the note.
It is always better to import the latest patches avialble in service market to avoid this type of problems.
Also see tha note 1010672 amd check whether it is applicable to your problem.
With rgds,
Anil Kumar Sharma .P
Message was edited by:
Anil Kumar Sharma

Error while installing 2LIS_03_BX update rules for 0IC_C03

Dear experts,
when i am trying to install the standard business content
update rule for 0IC_C03 for the datasource 2LIS_03_BX,
it throws me a error stating
"Object UPDR BW9VUFZSUYTTIZS0HT9I4U3RP could not be found"
I need the cause and solution for this error.
With regards,
Meiyappan

Please choose to install the Update Rule between InfoSource 2LIS_03_BX to InfoCube 0IC_C03.
You have probably not selected to install the Update Rule which is throwing an error.
While Installing, after choosing the required Objects, please also change the Display to "List" to be able to view all objects clearly.
Regards
Anujit Ghosh

Activation of Update Rule in BW 7.0

Hi Gurus,
We just upgraded BW 3.5 to 7.0. One of the load is failing because update rule is disabled in BW 7.0. Please tell me how to re activate the update rule in BW 7.0.
Regards,
Anil

Hi Anil,
Check this note:
<a href="https://websmp204.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=925304&_NLANG=E">925304 - P8:P31:SDL: Warnings for 'filtered out' data targets</a>
Note solution:
<a href="https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=0000954730">Note solution</a>
Let us know if you still face issue after applying the solution

Gettin Error While activating Device Mapping Rule

Hi all,
I am getting below error while generating Device attribute mapping Rule :
Err:Metainfo FM MMW_DM_DSMS_METH_META - Class Name not specified
Any idea how to resolve this problem.
Regards,
Abhishek

Hi Abhishek,
Custom attributes will not be reflected under category list.
It can be viewed by clicking 'customize' button only in sdoe_rmm01.Do not add custom attributes part of category.
If you have clicked 'Admin UI display' while creating it will get reflected in the admin portal under single valued or multi valued attributes tabs .This way it allowes you to assign custom atrribute values to devices from admin portal.
By the way when you created the other attributes.in category .how did you manage to give proper data types ?
When you say , backward compatible, are you planning to migrate the SyncBOs defined in MI to the current DOE?If yes , this is all that you need to do.
Regards,
Liji

Error in Update Rules

Hi All,
I am encountering the below error while activating the update rules of 0LIV_DS01
IC=0LIV_DS01 IS=2LIS_06_INV syntax error: The type "/BI0/OISR_SVP_LSY" is unknown
Please guide me.
Thanks.....

/BI0/OISR_SVP_LSY exist in your system? Maybe any transport is missing (InfoObject OISR_SVP_LSY)

Error in activation of update rules.

Similar Messages

Maybe you are looking for