Error in activity confirmation using CATS

Dea all,
While doing activity confirmation using cats in the transaction CATA following error is occuring:
CATS: Transfer to Project System
No records for transfer to PS
kindly help.
regards,
sudhir

Hi
First record the time in CAT2 t.code
Then transfer the time to project system using CAT5 t.code.
Do you followed the above t.codes?
In selection screen what are the selection parameters have you maintained?
Thanks
S.Murali

Similar Messages

  • Cost Element Error during Activity Confirmation

    Hi,
    We are using assembly processing to create projects. After project is created, a requirement arises and we manually assign few internal activities in CJ20N. When we do like that, a cost element gets picked automatically in the cost element field of External TAB along with Purchase Org & purchase group though it is an internal activity. This doesnt happen in already created activities during automatic creation.
    We don't need the system to bring these values for cost element, purchase org. & group. We are not using this cost element anywhere. In network profile cost element field is blank.
    So whenever we confirm the activity it throws an error message. CK197, G/L account for company code / costelement does not exist.
    Kindly advice.
    Regards,
    Rahul

    Hi, Rahul,
    Have your system is gone for any recent upgrade for EHP4 ?
    This error is due to EHP4 please implement following said notes
    1285728, 1277967.
    And after that remove the cost element from activities present in external tab which are created before not implementation which are giving error.
    revert after resolving the issue.
    regards,

  • Quantity not posted to object error in while activity confirmation

         Hello All,
    i am getting below error while activity confirmation , please help me on this below.
    Note : Activity and cost center and KP26 no changes are made compare to preview year and current year , for the fiscal year 2014 i didn't get any error , only for the fiscal year 2015 i getting  below error.

    Dear Hari,
    If the activity type of the confirmation has set the flags as
    mentioned (indicator MANIST in table COKL is set) the system will simply
    NOT post any quantity on the sender cost center/activity type during
    the confirmation.
    So all quantities which are currently missing (as these were not
    updated by the confirmation) must be posted with transaction KB51N.
    If you implement the coding corrections of #760437 you have the
    possibility to change the message BK263 from "I" to "A" in transaction -
    which is however not recommended.
    So the advised procedure is:
    -post all mising quantities with transaction KB51N first
    -then run the report ZRKMANIST_RESET to remove the flag MANIST (which is
    the reason why the confirmations did not post quantities on the
    sender cost centers)
    After this procedure, the quantities will again be updated when you
    post confirmations.
    Best regards,
    Jason

  • Error while creating activity by using BAPI

    Hi,
    While creating activity by using BAPI Im getting error as follows,
    Start processing of refference object handle generated.
    Integrity rule a d0008 broken
    business partner with function from vbkakom not vbpakom
    Integrity rule a d0008 broken
    edit all incomplete field .
    Please help me for solving this issue.
    Regards,
    Suresh

    Not received any proper reply Closing the issue.

  • Error in TCode S_ALR_87013431 "Confirmation Using Operation List" selection

    Hello Experts,
    I think I have encountered an error in the functionality of the S_ALR_87013431 "Confirmation Using Operation List" in ECC 6.0.
    When I select the "collective time confirmation" checkbox, the intended functionality is (form the transaction help) "If you select this field, the report program enters the selection result directly in the collective entry screen, without previously displaying a list of results from which you can reselect."
    However, if I check the box, the results still don't appear directly in the collective entry screen, but still as a list of results.
    Is there some configuration missing? Have you encountered a similar error?
    Thanks!
    Andreas

    hi
    i think there is some problem with the transaction ,in easy access menu it is displayed as S_ALR_87013431 confirmation with operation selection.
    i think same screen it has incorporated
    you can use IW48 which fullfil your requirement
    regards
    thyagarajan

  • How to avoid actual cost error log while confirm production order activity

    Hi
    I dont want to post actual activity cost via production order activity confirmation. But i want standard value keys for my production duration purpose. So,i defined activites(strd value key) in work center without assigning cost center to that work center. While i confirm in CO11N, system throws erro log as Actual cost calculation contain errors and allows me to confirm the activities. I am doing MB31 and all CO settlement activities also. But when i try to close the order it says error log exists,so closing of order is not possible. How to overcome this problem as i dont want to capture any cost of activites via production order,but i want confirmation only for production analysis.

    Hi
    Issue is resolved thru PP forum. Thanks for ur reply.
    Solution lies in Control key of routing and BOM costing relevancy.

  • Getting Error Msg " System Status INCM is active (confirmation 7300012896)"

    Hi ,
    Whlie confirming Goods in "Confirm Goods/ Services" user is getting Error " System Status INCM is active ( confirmation 7300012896)
    Can you please tell how to rectify this error message and confirm goods against PO.
    Regards,
    Avdhut

    check - click before doing confirmation
    there many other error message thrown at bottom side
    any user locked of for network / PM order  order in the PO
    some message will be thrown
    share taht message for more help.
    Muthu

  • I am having Problems with using my adobe digital Reader ,it gives me the error E_ADEPT_IO Activation

    i am having Problems with using my adobe digital Reader  ,it gives me the error E_ADEPT_IO Activation,what can i do to activate

    This is the Adobe Reader forum. If you are talking about Digital Editions, the right forum is here:
    http://forums.adobe.com/community/adobe_digital_editions

  • Adobe Activation error I bought a used CS2 application with serial numbers: it loads fine and works, but I cannot activate it and it will run out in 26 days. I bought it on ebat for 40 dollars. I am willing to pay a royalty fee. In 2006, or so, I bought a

    Adobe Activation error I bought a used CS2 application with serial numbers: it loads fine and works, but I cannot activate it and it will run out in 26 days. I bought it on ebat for 40 dollars. I am willing to pay a royalty fee. In 2006, or so, I bought a student version of CS2 at the College bookstore legally and registered it and it is still running on my 2002 eMac, but my Mac cannot communicate with my wireless printer I just got. So I looked for a copy of CS2 to put on my second hand IBM PC.

    Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

  • SQL error while activating DSO and loading Mater Data

    Hello Experts,
    we are having process chains which include process activating DSO and loading to Master data,
    while executing achai, we are getting error:
    An error occurred during confirmation of process 000008. See long text
    Message no. RSODSO_PROCESSING024
    Diagnosis
    Note the detailed system message:
    An SQL error occurred when executing Native SQL.
    when i go to T-Code: ST22
    the diagnosis is below:
    Runtime Errors         DBIF_RSQL_SQL_ERROR
    Exception              CX_SY_OPEN_SQL_DB
    Date and Time          20.05.2010 22:18:02
    What happened?
         The database system detected a deadlock and avoided it by rolling back
         your transaction.
    What can you do?
         If possible (and necessary), repeat the last database transaction in the
          hope that locking the object will not result in another deadlock.
         Note which actions and input led to the error.
         For further help in handling the problem, contact your SAP administrator
         You can use the ABAP dump analysis transaction ST22 to view and manage
         termination messages, in particular for long term reference.
         Note which actions and input led to the error.
         For further help in handling the problem, contact your SAP administrator
         You can use the ABAP dump analysis transaction ST22 to view and manage
         termination messages, in particular for long term reference.
    Could you please help me out how can i deal with this issue, .
    Regards
    Sinu Reddy

    it seems that the target you're loading to is already locked by another load...if it concerns a master data is also possible that the master data is locked by a change run. check your scheduling and make sure you don't load the same target at the same moment...
    M.

  • Windows vista system, continuously trying to download a DRM file in Adobe Digital Editions application shows "Error check activation". I have authorized the Fire Wall and still the same.

    windows vista system, continuously trying to download a DRM file in Adobe Digital Editions application shows "Error check activation". I have authorized the Fire Wall and still the same.

    Since Re-activation as suggested by the link above is not working for you, Can you please confirm the following:
    The OperatorURL is reachable. ( you can find the operatorURL from the acsm file by opening it in notepad,etc)
    And Book is still available on the book-store for purchase.
    (If any of first two are not available, you might have to talk to distributor for next action item to get the book. Since you will have record of purchasing the book, (in my opinion) they should provide you the new token for downloading the book)
    And please confirm this that you used the same userID for downloading that you used when you first fulfilled/downloaded the book.
    (If it is the case, then you have to use the correct userID)
    I hope it helps.

  • How to avoid Cost error log  while confirming production order

    Hi
    I dont want to post actual activity cost via production order activity confirmation. But i want standard value keys for my production duration purpose. So,i defined activites(strd value key) in work center without assigning cost center to that work center. While i confirm system throws erro log as Actual cost calculation contain errors and allows me to confirm the activities. I am doing MB31 and all CO settlement activities also. But when i try to close the order it says error log exists,so closing of order is not possible. How to overcome this problem as i dont want to capture any cost of activites via production order,but i want confirmation only for production analysis.

    Sudhar,
    You can make the operation not relevant for Costing by using a Customized Control key which is not relevant for Costing or else in the operation details you need to leave the "Costing relevancy" field blank.
    Regards,
    Prasobh

  • Activation fails using automated phone system

    I've used a MAK to activate several Windows Server2012 R2 machines using the automated phone system. On one machine, I enter the confirmation ID and get the "Thanks, you're all done" message, but when I check using slmgr, it still shows Unlicensed.
    I've tried using slmgr /atp <confirmation ID>, and get "Error: Product activation failed." I believe I am entering the correct confirmation ID, because if I change it I get an error message that the confirmation ID is invalid.
    Any ideas on where to look at why product activation is failing would be appreciated!

    Hi bmoranb,
    Would you please let us know current situation of this issue? Any update?
    I agree with Tim. MAKs by design have a limited number of activations. I suggest that you should contact the
    Microsoft Activation Call Center.
    Best regards,
    Justin Gu
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Adobe Digital Editions v4.0 Error: Check Activation on Windows 8

    This isn't a question but a solution that I found to an issue that I hope will help others. I couldn't find a discussion board on this so I'm creating a new one.
    I started getting the error message, "Error: Check Activation" when I was trying to download ebooks on my Windows 8 PC. I noticed this was problem for 2.0 as well, and when I tried to erase authorization and reauthorize (which seemed to be the way to fix the problem) it wouldn't allow me to. Then I tried to uninstall and reinstall which didn't work. Then I found the page for if you were having trouble installing ADE. I didn't really have problems with that part but I figured I would give it a try.
    One this page, it says to "manually" install the program (which involves downloading the actual zip file and going through that). I did this and it fixed everything! I was able to erase the authorization and reauthorize after this.
    I figured I would put this out there so that others might find it useful. I don't know this is specifically a Windows 8 problem or a v4.0 problem or what, but I would suggest trying to "manually" install the program before doing any of the other super complicated fixes that I came across and was scared to try.

    ok, follow the below steps as listed.
    1. Quit ADE.
    2. Choose Start > Search for regedit
    3. Right click on regedit, ans select "Run as admininstrator"
    4.In the left pane of the Registry Editor, locate the following registry key: HKEY_CURRENT_USER\Software\Adobe\Adept
    5. Select Adept key, right click on it and select "Delete"
    6. In the Confirm Key Delete dialog, click OK.
    7. Close the Registry Editor.
    8. Open Adobe Digital Editions and reauthorize.
    Hope this works !!

  • Network activity confirmations

    1) Hi guys please advise is it  possible to avoid (by means of error ) the second confirmation of an activity whihc was already fully confirmed and completed.
    2) The milestone once it has received an actual date should not be possible to change the first actual date. So may be is it possible to get the field greyed out after doing the actual postings to milestone.I am not using the confirmation by means of a percentage completion of milestone and activity, instead my scenario requires the confirmation manually.
    3) How can we control that the milestone actual date should not be less than 3 days of the system date.
    The issue is important and urgent .Kindly advise
    Thanks
    RKS

    Hi,
    Thanks once again.
    I have been trying the SPRO and Enhancements listed under Confirmations node, but have a feeling that they may work for controlling network activity confirmation and not for milestones.
    Can you please confirm if these can work to control the milestone actual dates as per my requirement i.e. the actual dates once posted manually to milestone should not be possible to be changed.
    Kindly let me know of any other enhancement or exits if you are aware.
    Thanks and Regards
    Rajeev

Maybe you are looking for