Error in Adapter engine in RWB

Hi,
I'm facing 2 type of issues in RWB,
Issue 1) Adapter Engine is in Red State in Component monitoring,
Error: Details for 'Is the Adapter Engine Running?'
Response from Adapter Engine: Fatal ArchiveJob (Archiving) failed.(Details: Code: MS.JOB.ARCHIVE; Location: com.sap.engine.messaging.impl.core.job.executor.ArchiveExecutor; Reason: java.io.IOException: The HTTP request of command "MODIFYPATH" did not reach the XMLDAS. This may indicate that the credentials for the HTTP destination have expired.; Time: 31.03.2011 00:00:05)Response from Adapter Engine: Fatal ArchiveJob (Archiving) failed.
2) If I click, any one of the option like Communication Channel monitoring, Engine Status etc, I'm getting the error
"Internet Explorer cannot display the webpage"
It seems to be the URL to open these component(Communication Channel monitoring, Engine Status etc ) is wrong. Fromwhere the URL address is taken? Where we need check the host name??
I searched in sdn, but could not find any related topics.
Kindly help me resolve this issue ASAP.
Thanks & Regards,
Baskaran K

Hi Baskaran,
For 1), did you check if the XML DAS communication user (used in destination "DASdefault") is configured correctly according to the documentation http://help.sap.com/saphelp_nwpi71/helpdata/EN/43/68fac39a363d33e10000000a11466f/frameset.htm and is assigned to the "XMLDASSecurityRole" role?
And check if you have configured the rules for your Archiving job (Component Monitoring -> Adapter Engine XIE -> Background Processing).
It seems the archiving does not work because of configuration issues.
An archiving job without rules means: all messages are relevant for archiving. The delete job will only delete messages which are not relevant for archiving. So it does not do anything in this system. It can lead to the database table keeps growing, if it's the case too.
You should check the archiving configuration so that the archiving job runs successfully.
If you do not want to archive the messages, please deactivate the archiving job. Then the delete job should clean the old messages with the next execution.
You may delete it straightly on the Background Processing.
For the 2), "Internet Explorer cannot display the webpage", try using the compatibility mode of your browser.
Regards,
Caio Cagnani

Similar Messages

Error in Adapter engine-"No_Spedin"

Hi All,
I have observed the below error in adapter engine today(System error).
JCO.Exception while calling /SEEAG/RELI_XI_EDIINH_FILE in remote system (RfcClient[PEQ_RFC_INBOUND]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Exception condition "NO_SPEDIN" raised.: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException
The message is going to print Sumfax to SAP ECC.There are no errors in the mapping and the communication channel is also running fine.there was an upgrade in SAp recently after which i observe this error and it didnot exist before.
Can anybody please help me!

Hi Sudha
check Abhishek's Reply may be helpful at this thread for com.sap.aii.af.rfc.afcommunication.RfcAFWException
Re: Error during processing local bean: localejbs/RfcAFBean
also check the The Sender Agreement Interface , it is either missing or not correct in ID
Regards
Abhishek

XI Adapter ? No messages in the adapter engine in RWB

Hi Guys,
I have the scenario SOAP-PROXY. I have configured XI Adapter on the receiver side. I have used xml spy to post the messages directly to the IS. I could not see any messages in the adapter engine in RWB.
I have seen the messages processed successfully in the integration engine under RWB.
can anybody explain why i could not see any messages in the adapter engine ? Is It normal with the xi adapter on the receiver side ?
Thanks,
Raj
Message was edited by:
raj reddy

Raghu.
I've done the following:
1. I've executed SE38 tx code.
2. I've entered the "RSXMB_DELETE_MESSAGES" report as "Program"
3. As the "RSXMB_DELETE_MESSAGES" report does not have a selection screen, it must be executed with default parameters. So, I selected "Program -> Execute -> Background".
4. There are no available variants, so I clicked on the "Execute immed." button.
5. The job starts. I can monitor it on the SM37 tx code.
6. It only deleted 20 messages.
What I get from this, is that the "RSXMB_DELETE_MESSAGES" report cannot delete the big part of the messages since them are marked as "Archivable" and not as "Archived".
what do you think of it??
regards
Carlos.

Graphic Mapping:IDOC to File-Avoid Error in Adapter Engine

Hi all,
I'm using Graphic Mapping in my IDOC to File scenario in which each segment in source IDOC will generate a ROW in target File with the condition: DATBI >= currentdate (and some other conditions)
I have a UDF and use the mapping function CREATEIF for this purpose:
DATBI -> UDF -> CREATEIF -> ROW
Problem scenario: In the source IDOC if all the segments have DATBI < currentdate then there is no ROW created, and I get the error in Adapter Engine
Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure ...
How can I avoid this?
I've tried to put this condition using XPATH in Interface Determination and got the error.
There is a way to use function current-date() in XPATH condition?
Thanks for your help,
Elaine

Hi all,
How can I "suppress the row node if condition fails"? I'm new in PI, so please give more details.
My FCC as follows:
Record Structure: Record, Row
Row.addHeaderLine 0
Row.fieldSeparator ,
Record.fieldSeparator 'nl'
Row.endSeparator ; 'nl'
It works fine if the condition satisfied.
In Message Mapping, I've use Test to double check my mapping, and in the scenario that conditions fails, there is no Row in the target message.
Please advise.
Thanks,
Elaine

ALERT not getting triggered for messages in error in adapter engine

Hi All,
I am doing the same scenario where I have created two Alert category Alert_cat1 and Alert_cat2, both are similar but one i have created for error in integration engine(Alert_cat1 ) and other for adapter engine(Alert_cat2).
Now for Alert_cat1 i have created a rule and in the setting "where did the error occur" I have given no restriction.
Now for Alert_cat2,as discussed in the above blog I have created many rule each for various adapter.
I have tested it, above mentioned configuration is working for message mapping error (sxmb_moni)
but not for any error in adapter engine for messages in waiting or system erroe status.
Kindly suggest where I am going wrong.
Regards
Shefali S

HI,
please refer this below blog:
Does Alerts work for Integrated configurations scenario??
thanks,

In my Component monitoring i got this error for Adapter engine status.

In my Component monitoring i got this error for Adapter engine status. Status is in red..
Attempt to fetch cache data from Integration Directory failed; cache could not be updated
[Fetch Data]: Unable to find an associated SLD element (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, is.03.server3, string], target element type: SAP_BusinessSystem)
Please clarify ASAP..
Thanks..

HI,
See below links you will get ..
Process Integration (PI) & SOA Middleware
ERR:Could not find SLD name for XI Application "DIRECTORY"
Unable to find an associated SLD element
Regards
Chilla..

Reg: Error in adapter Engine Monitoring

Hi Guys,
In my RFC to File Scenario i got error as Adapter message property was configured was mandatory element but there is no Dynamic ocnfiguration elementin XI MEssage Header. This is occur in adapter engine monitoring in RWB.
Thanks

This error comes if you there is a problem in passing the file via dynamic configuration
for this if you want temporary solution like filename not necessarily be dynamic then go to receiver file adapter then
adapter specific message attributes deselect filed Failif file name does not.... sme option where you can uncheck the failure option
and in this case need to provide the filename and file will get generated with this filename if there is no filename generates using dynamic configuration
for this to resolve permanently then check the filename is passed or not to file adapter in moni in dynamicconfiguratuoin tab of callAdapter pipeline service
HTH
Rajesh

SYSTEM ERROR IN ADAPTER ENGINE

HI experts,
i have the scenario proxy ->xi--->third party
when i am trying to send the message from RWB->Adapter engine----->testmessage
it shows the following error in the communication channel
2011-04-13 03:35:13 Information The message was successfully received by the messaging system. Protocol: XI URL:
2011-04-13 03:35:13 Information Using connection SOAP_http://sap. Trying to put the message into the receive queue.
2011-04-13 03:35:14 Information Message successfully put into the queue.
2011-04-13 03:35:14 Information The message was successfully retrieved from the receive queue.
2011-04-13 03:35:15 Information The message status was set to DLNG.
2011-04-13 03:35:15 Information Delivering to channel: CC_Channel
2011-04-13 03:35:15 Information SOAP: request message entering the adapter with user J2EE_GUEST
2011-04-13 03:35:15 Error SOAP: call failed: java.net.UnknownHostException: hostname/port
2011-04-13 03:35:15 Information SOAP: sending a delivery error ack ...
2011-04-13 03:35:15 Information SOAP: sent a delivery error ack
let me what i need to do for this
thanks in advance
Edited by: katakoti on Apr 13, 2011 2:53 PM

Hi
thanks for your reply
i am able to send the data to that url through soap but when i am trying to use the xi to send the data it shows that error
1 .let me how we ping the host of that webservice in xi server
when i am using the proxy host and port it shows another error
SOAP: call failed: java.net.ConnectException: Connection timed out
so please advice me what actions will taken by the network guys
thanks in advance
Edited by: katakoti on Apr 14, 2011 1:20 PM

"Non-Central Adapter Engines" in RWB

Hi.
We install XI system and we changed host name according to notes 757692.
After then, We found one problem in RWB.
When we run Component Monitor in RWB, Adapter engine is in "Non-Central Adapter Engines".
Why Adapter engine is in "Non-Central Adapter Engines" node ?
Any ideas ?
Regards, Arnold.

Hello Sonali
This is most likely caused by errors registering the XI components in the SLD. Apply the notes below:
#764176 Error in XI due to inconsistent SLD contents
#1117249 Incomplete Registration of PI components in SLD
#1334053 No automatic PI 7.10 SLD Registration
Also search the forum for similar issues registering the adapter engine in the SLD components.
Regards
Mark

Error in Adapter Engine

Hi Experts,
In the Component Monitoring, the ADAPTER ENGINE have a RED status, show the message:
Details for Ping Status
Message: Cannot construct correct URL for runtime check using entries in SLD for component af.pid.<hostname>; correct entries in SLD
Stacktrace:
com.sap.aii.rwb.exceptions.OperationFailedException: Cannot construct correct URL for runtime check using entries in SLD for component af.pid.<hostname>; correct entries in SLD
at com.sap.aii.rwb.core.XIJavaRTCComponent.getConnector(XIJavaRTCComponent.java:188)
at com.sap.aii.rwb.core.XIRTCComponent.ping(XIRTCComponent.java:209)
at com.sap.aii.rwb.web.componentmonitoring.model.CompTestModel.doPing(CompTestModel.java:581)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.doPing(CmDynPage.java:425)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.updateTests(CmDynPage.java:525)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.selectNode(CmDynPage.java:552)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.process_treeClick(CmDynPage.java:481)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Any idea.
Tks in advance.

Hi Pedrão, how are you?
Look at Exchange Profile, if the entries about RWB are the same the entries in the SLD.
You can confirm the Technical System type Process/Exchange Integration and its application system is right.
Follow link about troubleshooting guide:
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/b0458509-49c1-2a10-1188-af2aeb97ed9a
Regards.
Bruno

Adapter Engine alerts: Error in Adapter Engine

Hi All,
I have configured Alerts for <b>Adapter Engine</b>.
I am getting alerts with Alert Text as follows during Scenario runs - XML File to ABAP Proxy Scenario (Average size of files is in MB's) daily.
1.Error: DeliveryException: Problem inserting 6204b980-2f9d-11dc-9262-001635731444(OUTBOUND) into the database: com.sap.engine.services.dbpool.exceptions.BaseSQLException: Connection is invalid.
2.Error: com.sap.engine.services.ts.exceptions.BaseSystemException: Exception ( SAP J2EE Engine JTA Transaction : [c1e757e003475] ) in rollback.
This error comes just <b>momentarily</b> and Messages (Files) are processed Successfully (No System Errors,etc at Adapter Engine).
I am not able to figure out the reason for this exception.
Expecting your valuable inputs.
Thanks.
Regards,
Sudharshan N A

Hi,
This happens sometimes when the adapter engine is on heavy load. Since the message is asynchronous, it is persistent. So it tries to write the message onto teh backend DB on which XI is involved. When teh load is more on the AE, the communication sometimes fails for a few milli seconds. This happens at times. Once it has enough capacity, it again preocesses the message successfully. It also happens sometimes that the message content will be lost. As of now, i am not sure if there is any solution for this.
reward if helpful.
Thanks,
sarath.

Error resending messages with system-error in Adapter Engine

Hi all,
We got an error when trying to resend all messages in error in runtime workbench, message monitoring, adapter engine, database (overview), clicking on a sender service with messages in error state, and clicking on "repeat" button to resend those in error messages. The error is "No authorization to execute action for component Adapter Engine XP0". The user We are using to perform this task is associated to all groups available in CUA... some of you has any tips about how to perform this operation?
regards.
roberti

I really don't remember what solved this problem, but it is solved. Now the functionality works as it should.
Regards.
Waldemar Roberti

Message Id duplicated error in Adapter Engine

Hello guys,
last week we had an error in an adapter JDBC sender. The error we see in the adapter is: Error during commit or rollback of database transaction: 'com.sap.aii.af.service.util.transaction.api.TxManagerException: Unable to commit transaction: The transaction has been rolled back: com.sap.engine.services.ts.transaction.TxRollbackException'
If we see inside the error says that when is tryring to put the message in the queue the error is that the key message id is duplicated.
Searching in the message monitoring, there is a message processed with the same message id 3 hours before.
The problem was after a re-start of PI, and the solution was to create a copy of the adapter. we tried to start/stop, inactivate/activate and the error still continue, Ia have not tried to put the old adapter again.
Anybody knows what could be the problem or a correct solution?
Many thanks ind advance.
Regards,
Xavier.

Hi, Xavier
See note 1361305 - File sender adapter generates duplicate message IDs.
In my system, this note solved the same problem in JBDC and file adapter.
Regards,
Carme.

Proxy Runtime errors in Integration Engines at RWB

Hi Experts,
We have configured the point to point configuration scenario in our landscape. I have two ABAP systems exchanges data using PI. I have configured both the ABAP systems as Application Systems and Corresponding Integration server as my PI system.
In RWB of PI I can see both these systems as proxy run time under Integration Engines, but are in error status.
Path to the same is Component Monitoring>Components>Integration Engines (here I can my systems as Proxy Runtime BSAB200, Proxy Runtime BSID200).
When run the test got the below error.
Can the SLD be reached? RFC destination LCRSAPRFC does not exist
Does the Integration Engine know the business system?
Are roles in SXMS_CONF_ITEMS and SLD consistent?
Why do we need to create the RFC destination again when we select the related integration server as PI.
Can any one throw some light whey are these errors are occured.
Thanks,
Chinna

Can the SLD be reached? RFC destination LCRSAPRFC does not exist
Reached to SLD but not to exchange profile.
Does the Integration Engine know the business system?
Yes.
Why do we need to create the RFC destination again when we select the related integration server as PI.
A central SLD scenario involves a central SLD, but not a central exchange profile.
The exchange profile used is always the one on the Integration Server the
application system connects to the exchange profile using the SM59 destination
LCRSAPRFC.
Regards
Pothana

Error in Adapter engine of receiver soap adapter

Hi All,
There is one production issue i am currently facing in receiver SOAP adapter while interacting with third party web service(Asynchronous call).
Below is the description i am getting in audit logs.
Success SOAP: completed the processing
Error SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 401 Invalid Session ID or Session Expired
Success SOAP: sending a delivery error ack ...
Success SOAP: sent a delivery error ack
Error MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 401 Invalid Session ID or Session Expired
Error Exception caught by adapter framework: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 401 Invalid Session ID or Session Expired
Error Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 401 Invalid Session ID or Session Expired.
Error The message status set to NDLV.
Moreover this is a production issue and interface was running fine till last friday.
Has someone ever faced this issue ?
Please provide your valuable inputs on this.
Thanks
Anku

Hi,
Search in sdn with your error message string,you will find ton of links.
HTTP401 error occurs for many reasons.
still no solution let us know..
Regards,
Raj

Error in Adapter engine in RWB

Similar Messages

Maybe you are looking for