Error in Adding Mac Address in WLAN
Hi,
We have multiple wlan's here in our Company.
Im having trouble with mac addresses which I registered BEFORE via mac filter
and DELETED it after couple of days.
Right now, I need to register this mac addresses again via MAC Filter but error appears below.
ERROR: User name 'xx:xx:xx:xx:xx:xx' is already used as a Mac Filter.
Need to specify unique MAC Address across Disabled Clients, AP auth,
Management users, Network users and Mac Filters
What can I do to be able to register the mac addresses that already removed to our WLC???
Thanks in advance for any help you can offer.
There are two spots that a mac filter is added. You can only have a mac address in only one of these spots. Verify that it is not in one of these spots.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
Similar Messages
-
ARP cache not adding MAC address
Hi,
We have a network in the company where visitors\customers can connect their PCs to pick up a IP address & access the internet via our cluster of Checkpoint firewalls. The problem we are having is that whenever somebody with a Mac tries to use this network they cannot access the internet although it works fine for all Windows based PCs. So to investigate I got hold of a IBook & made the following observations.
The gateway provided by the DHCP servers is a IP address (192.168.48.203) on a multicast mac address that represents both of the firewalls, which in turn have a physical address of 192.168.48.201 & 192.168.48.202 respectively. This is done to provide redundancy.
What happens on the IBook is that it picks up a DHCP address as well as the DNS & gateway address as supplied by the DHCP server, but then when you try to access the internet you have no joy. If you check the arp table you will then notice that the table have not been updated with the mac address of the 192.168.48.203 gateway. If you then manualy add the mac address of 192.168.48.203, using arp -s, it works fine or if you staticaly configure the IP address settings to use either 192.168.48.201 or 202 as gateways (which have unicast mac addresses) it also solves the problem & immediately updates the arp cache with the mac addresses of either of these two interfaces depending on which one you are using.
We put a sniffer on the network & could see that the mac address for 192.168.48.203 is being passed on to the IBook but for some reason it just does not update the arp cache with this details. Also tried this on some of the other networks we are running that uses the same concept & the same thing happens. As I mentioned no Windows hosts are having this problem & immediately updates their arp details to include the mac address of the .203 address.
On a Mac after obataining a DHCP address & running "netstat -r" you get the following:
Internet:
Destination Gateway Flags Refs Use Netif Expire
default 192.168.48.203 UGSc 5 5 en1
127 localhost UCS 0 0 lo0
localhost localhost UH 9 2477 lo0
169.254 link#5 UCS 0 0 en1
192.168.48/22 link#5 UCS 1 0 en1
192.168.48.203 link#5 UHRLW 4 30 en1
192.168.51.1 localhost UHS 0 1 lo0
Then after adding the mac address manualy it looks as follows & works fine:
Internet:
Destination Gateway Flags Refs Use Netif Expire
default 192.168.48.203 UGSc 26 6 en1
127 localhost UCS 0 0 lo0
localhost localhost UH 9 12353 lo0
169.254 link#5 UCS 0 0 en1
192.168.48/22 link#5 UCS 0 0 en1
192.168.48.203 1:0:5e:7c:0:48 UHLS 26 28 en1
192.168.51.1 localhost UHS
Any ideas why this is happening ?
Regards
IBook G4 Mac OS X (10.4.3)Hi,
I am facing exactly the same problem here with an iMac G5. I have called the apple support and the conclusion was that they have no clue for that and we should wait for an update that will hopefully resolve this.
I was also aksing them if there was a way in the mac to set a static mac address for the gateway in the macintosh so I don't have to run the terminal and type the arp -s every time I start up. They said it is out of the kind of support they can provide... Do you have an idea on how to add a static ARP entry in the table ?
Thank you. -
MAC address of WLAN router radio
Is there a command to get the MAC address of the WIFI I am connected to?
Here's a script that'll get the mac address of your current default gateway
Which is not necessarily the same as the MAC address of the base station you're currently connected to.
It may be on small residential networks where the base station IS the gateway, but it won't be that way on most corporate networks, nor on networks where there are multiple wireless access points providing broad area coverage and you're trying to discover which access point you're connecting through. -
Hi All,
Can any one suggest, how to add mac address manuall, as I am unable to learn MAC in CAM.You can statically bind mac address to a switch port
by using command
mac-add-table static "mac-id" "vlan-id" "interface-port" -
How I can correct this error?
The MAC address is zero in my nokia c3 AT & T
I updated the software and nothing at all
please help !!!!!
As you may understand without the MAC can not be activated the Wlan connection in the phone, and please do not come with the solution go to menu Principles, WLAN connectivity, etc, to see the MAC, which is not view the problem.
Thanks/t5/Cseries/Nikia-C3-Mac-Address-00-00-00-00-00-00/td-p/1014815
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520 -
AP 2700 - 2 MAC addresses - problem with joining to the WLC
Hi,
I had a problem with joining my new AP 2700 to the controller. I've found workaround but I would like to ask you if you know if this behavior is a some kind of bug or maybe feature :)
I have DHCP server which assigns IP address base on the binding MAC address with the IP address. Without binding, IP won't be assigned so I added MAC address from the AP sticker (MAC and SN number is on the sticker at the back of each AP) to the DHCP, connected AP to the switch port which was configured exactly the same way like other ports on this switch where older AP are working fine and.... nothing. IP address was not assigned. There was no DHCP request in the DHCP server logs.
During the investigation I've found that AP present 2 MAC addresses on the switch interface:
switch#sh mac address-table interface fa1/1
Mac Address Table
Vlan Mac Address Type Ports
11 58f3.54c1.2cb3 DYNAMIC Fa1/1
11 58f3.54c1.2cb4 DYNAMIC Fa1/1
The first one (58f3.54c1.2cb3) is a "sticker" MAC address but the second one (58f3.54c1.2cb4) is something new. Looking in to the DHCP logs I've found log that this second MAC address (58f3.54c1.2cb4) tried to get IP address but it was not possible because this MAC was not binding with any IP address so DHCP server refuse. I added this second MAC (58f3.54c1.2cb4) to the DHCP server, AP get IP address, join to the WLC, download software, reboot and ... this MAC address disappear.
switch#sh mac address-table interface fa1/1
Mac Address Table
Vlan Mac Address Type Ports
11 58f3.54c1.2cb3 DYNAMIC Fa1/1
Software I had on the AP before joining to the WLC was:
Version :
Cisco IOS Software, C2700 Software (AP3G2-RCVK9W8-M), Version 15.2(4)JB5, RELEASE SOFTWARE (fc1)
now I have (after downloaded from the WLC)
Version :
Cisco IOS Software, C2700 Software (AP3G2-K9W8-M), Version 15.2(4)JB6, RELEASE SOFTWARE (fc1)
Do anyone know what happen?(WLC1) >show sysinfo
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.6.130.0
Bootloader Version............................... 1.0.20
Field Recovery Image Version..................... 7.6.95.16
Firmware Version................................. FPGA 1.7, Env 1.8, USB console 2.2
Build Type....................................... DATA + WPS
System Name...................................... WLC1
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.1069
Redundancy Mode.................................. Disabled
IP Address....................................... 10.10.10.10
Last Reset....................................... Software reset
System Up Time................................... 25 days 2 hrs 53 mins 5 secs
System Timezone Location.........................
System Stats Realtime Interval................... 5
System Stats Normal Interval..................... 180
Configured Country............................... US - United States
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +44 C
External Temperature............................. +22 C
Fan Status....................................... OK
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Disabled
Number of WLANs.................................. 6
Number of Active Clients......................... 25
Burned-in MAC Address............................ XX:XX:XX:XX:XX:XX
Power Supply 1................................... Present, OK
Power Supply 2................................... Present, OK
Maximum number of APs supported.................. 25
(WLC1) >show time
Time............................................. Thu Apr 9 13:51:00 2015
Timezone delta................................... 0:0
Timezone location................................
NTP Servers
NTP Polling Interval......................... 3600
Index NTP Key Index NTP Server NTP Msg Auth Status
1 0 10.10.10.11 AUTH DISABLED
It's look like AP doesn't allow for console login or commands it just only show activity. After rebooting the WLC I get information:
Cisco IOS Software, C2700 Software (AP3G2-RCVK9W8-M), Version 15.2(4)JB5, RELEASE SOFTWARE (fc1) -
New MacPro eth1 MAC address showing as HP?
Hi All,
Just purchased a new MacPro with 10.9.2 on it. We record MAC addresses for network troubleshooting, and while capturing those addresses I noticed something strange with this particular Mac Pro.
There are two physical Ethernet interfaces on the machine, Eth1 & Eth2. The MAC addresses of those two interfaces as reported by "About This Mac:System Report" and ifconfig are:
Eth1: 00:14:c2:4e:01:00
Eth2: 00:3e:e1:c0:fc:79
The odd thing is that when I performed a lookup of the Eth1 MAC address, the first 3 octets of the Eth1 MAC address show it as being an HP device (i.e. 00:14:c2).
I looked on a variety of sites to make sure that it wasn't an error in their MAC address database
http://www.macvendorlookup.com/mac-address-lookup
http://www.wireshark.org/tools/oui-lookup.html
Unless there is an error in the vendor lookup, they both agree that this is an HP MAC address.
One more interesting datapoint: The label on the outside of the box that shipped with the Mac Pro shows an Apple MAC address.
In a phone call to Apple, I reported this to a Tier 1 Apple Support technician. He indicated that since this wasn't affecting the performance of the Mac that it was a non-issue for Apple. Not sure I agree with his response, so I'm bringing it here. I'm going to try the 10.9.3 upgrade on it today under the possibility that there is a system call problem that is incorrectly reporting the MAC address, but I'd appreciate any other ideas.
thanks,
BrenI suggest opening the Print & Scan System Preferences, then highlight your HP Photosmart printer in the printers list and delete it by pressing the minus sign. Now, re-add the printer by clicking on the plus sign and select the printer. Make sure that the 'Print Using:' pull down aut selects the correct driver for your printer. If it doesn't, pull down the list and manually select the correct driver using the 'Select Printer Software' option. Hopefully that will resolve your issue.
HP Printer Support for Mac OS X -
My router doesn't accept my MAC address
Hi.
I'm trying to set static IPs on my router (Netgear DGN 2000). I go to the "Connected devices" panel, and among them I can see my iMac. Its MAC address is odd ( like c4:2c:xx:xx:xx:xx). As I try to set a static IP, I get an error saying "Invalid MAC address". My other non-Apple devices all have MAC addresses starting with 00:xx:xx:xx:xx:xx and I can assign a static IP to them. Ihave the same problem with my MacBook.
Is there something wrong with the iMac? Or the router? Or both ?I'm glad to hear that, Thanks
But I checked and there is no update for my router... Maybe I'll write to Netgear support, I would rather not buy a new router just to fix this problem! -
Correcting the error in Nokia C3-00 Mac address ap...
Correcting the error in nokia C3 Mac address appears in "00:00:00:00:00:00"?
Help, I can not find to do, My Nokia C3 At & T, will not let me connect to internet with WLAN, this is due to this error in Mac Address that appears on Zeros, Nokia please people ..
and is updated to
C3-00
v 7.25
26-11-10
RM-614
(c) Nokia
Variant: 180.01
Spanish
Como corregir en nokia C3 el error Mac address Aparece en "00:00:00:00:00:00" ?
Auxilio, ya no encuentro que hacer, Mi Nokia C3 At&T, No Me deja conectar a internet con Wlan, esto se debe a ese error del Mac Address que aparece en Ceros, por favor gente Nokia..
y esta actualizado a la
C3-00
v 7.25
26-11-10
RM-614
(c) Nokia
Variante: 180.01Lords and will not receive a technical cualifcado nokia who knows how to solve this problem in nokia c3 team because they all respond with the same answers no solution, because software updates do not provide the updated driver Wlan card c3 using the nokia ..
thank you and excuse me but I'm waiting Jart
Spanish
Señores y es que no va aparecer un tecnico cualifcado de nokia que sepa como resolver este problema en equipo nokia c3, ya que todos responden con las mismas respuestas sin solucion alguna, porque en las actualizaciones del software no facilitan el driver actualizado de la tarjeta Wlan que usa el nokia c3..
gracias y excusemen pero estoy jarto de esperar -
BAT - Dummy MAC address Import error
Hi,
I am going to use TAPS and I am attempting to add phones via BAT with Dummy MAC address.
I named each device 000000000001, 000000000002 etc. The rest is normal entries.
When i export I check the bnox to use Dummy MAC
I am getting an error that the device is not unique in the lods and no phones are added. I checked and there are no MAC addresses/Phones/DN's with the same values.
Any advice is welcome.
Thanks,
RandallHi,
I am going to use TAPS and I am attempting to add phones via BAT with Dummy MAC address.
I named each device 000000000001, 000000000002 etc. The rest is normal entries.
When i export I check the bnox to use Dummy MAC
I am getting an error that the device is not unique in the lods and no phones are added. I checked and there are no MAC addresses/Phones/DN's with the same values.
Any advice is welcome.
Thanks,
Randall -
MacPro backed up to Time Machine, added Mac Mini now get "The backup disk image “/Volumes/Data/Jerry Booher’s MacBook Pro.sparsebundle” is already in use." error when Mac Pro tries to back up
It is standard Mountain Lion error due to the networking ability which is comparable to wet string. (actually that was lion.. it dried out some with Mountain Lion.. higher in the hills perhaps!!)
See C12 and C17
http://pondini.org/TM/Troubleshooting.html
But many people are suffering the same issue..
And the above is even a little out of date.. you might need to do a reset to the TC.
Welcome to Apple's beta program for everyone. -
I am not able to send mails through Yahoo APP. It gives me an error msg :"the sender address has ben rejected by the server ".
I tried adding username and password in the SMTP server settings,But those optiopns are greyed out.
So, i am not able to enter anything in fields under SMTP server settingsYou probably have changing settings disabled in Restrictions.
-
My kid pulled my CP out now getting Illegal MAC address error
So my kid was playing around and pulled the CF out of my 2801 router. It is a router I use at home for testing purposes. Well now I am getting an error Illegal MAC when I try to use rommon to tftpdnld a new IOS. I have also tried xmodem without success. I did read about bad cookies but there wasnt really an answer to the problems presented. Can someone point me in the right place.
ThanksSo through trail and error I was able to manipulate the cookie to finally work on my machine. This address helped tremendously.
https://learningnetwork.cisco.com/thread/23693
I did have to make up a MAC address but I used this address http://standards.ieee.org/develop/regauth/oui/oui.txt
to at least get the correct vendor type.
Everything loaded from there. There are so many people who stated it was a compact flash issue. This was not the case at all. It was a corrupt cookie on the mainboard. -
in mavericks, how can I add my linkedin account without adding my contacts to my mac address book?
it seems to be a prerequisite to adding the account. any advice please?Welcome to the Apple Community.
iTunes, iCloud, Messages and FaceTime are all seperate services. You could change your ID for Messages without affecting anything else. If you wish to change your ID for iCloud, you would need to save your data, please let us know if you wish to use another ID for more than messages. -
Hello everyone,
i have a network with a
L3(core) 6500 12.2.3(33)SXH5 with vtp (server) and pruning on, rstp
L2(distribution, ) with 3750 fiber connected
L2(access) with mixed hardware 2950-3750
when i go to setup a rspan:
6500(config)#vlan 400
6500(config-vlan)#remote-span
access(config)#monitor session1 source remote vlan400
access(config)#monitor session1 destination fa2/0/1
access(config)#monitor session1 source int gi1/0/37, gi1/0/44, tx
access(config)#monitor session1 destination remote vlan 400
my problem is on a periferic access switches 2950 not redundant:
i relevated a
duplicate mac-address table, i found a every mac on 2 vlan, the 200 and 400(of remote span) with related problem of loss of packets and random connection problem
My question is:
is compatibile the rspan with 6500 vtp, how i can fixed this problems?
thank youOther users from the forums with a similar problem came to a conflict occurring here
Oct 18 11:52:41 MacBook-Pro opendirectoryd[123]: 2595.39 - ODNodeCreateWithNameAndOptions failed with error 'Unknown node name' (2000)
They say it's some sort of conflict with the language of the installation or is it language keyboard input, then what is meant and how it can be solved I do not understand if this is certainly so.
(sorry for my bad english)
Maybe you are looking for
-
Problem facing in sender file adapter
Hi XI gurus, I am facing a problem in sender file adapter communcation channel Is there any restriction in XI that XI picks max of 100 at a time . Actaully probolem here is My XI sender file adapter need to pick 2800 file from ftp. adapter need to fi
-
How do i sync my iphone with just upgraded iTunes?
i just did an automatic update to itunes and, wow, am i sorry. why do they keep doing this? now there is no button for syncing my iphone. does anyone know how to do that or how to get back the last versioin of itunes?
-
I am unable to view the full content of various web sites after purchasing Advanced System Care Pro. I was using the free version before with no problems. I cannot figure out if or which setting was changed. I tried doing a system restore but that di
-
Awesome users report on your usage habits and favorite apps
So, I've been wondering what apps users of the awesome window manager are using. I'm trying to get used to the concept of a tiling window manager, but the graphical apps I'm used to look like crap. I've seen some really good looking screenshots of ti
-
Can i change imported RGB colours to specified CMYK colours quickly in Indesign rather than doing ea
Can i change imported RGB colours from a word doc to specified CMYK (already in the swatch panel) colours quickly in Indesign rather than doing each one manually? Is there a script so you can allocate rgb colours to cmyk colours?