Error in adding remote process chain to existing one

Hi all,
when I try to add an remote process chain to an existing one I get an error. I created a variant for the remote call. I entered the destination and when I try to choose the remote process chain I get the following error:
Error in remote call of destination
The following error occurred during the remote function call for destination XY:
Dynproausgabe ohne Verbindung zum Benutzer (Sorry error message is in german)
I checked the RFC and it is working. On the testsystem things were ok. On productive system it doesn't work... No I can not transport since the regarding process chain is only existing on productive.
Thanks for any hints
Stefan

you can check out SAPNOTE 659160.

Similar Messages

Error when trying to add remote process chain related to some other system.

Hi Gurus,
I am trying to add process chain related to some other system in BW production through remote process chain but i am getting the issue " :RSM:918 YCPG_WEEK_GESPL_BW APO_DP_RTR DEFINITION 23" while checking or activating the same.i am able to add successfully in quality environment but getting the issue in only in production..I just tried to add some other chains too but i am getting same error for other chains which are related to same system.this means issue is present for all the chains related to that system.
Can you please help me how to resolve the above as it is very urgent for me?.
waiting for oyur response.
Thanks,
Nani

Hi,
Connection is working fine.we already checked RFC connection earlier itself.we have not find the same issue in quality environment i.e when we try to trigger same chain in corresponding quality environment it's working fine.where as when we are trying to checking/activate the same chain in production through remote process we are getting the above issue.
Please help me to resolve the issue.
Thanks,
Nani

Error after transporting a process chain

Hi Experts,
I am facing an issue regarding remote process chain variant, as i have added it in an existing process chain, Now its throwing an error in Quality and the changes are also not visible..Please help me out in finding a solution..
Regards
Arpita

Hi,
when i am transporting it to Quality or production system, that variant for remote process chain is not visible. I have tried it many times. Connectivity between the systems are fine.
I have kept APO System as destination
And Destination for callback BW System..
Please let me know if i am wrong..
Regards
Arpita
Edited by: Arpitac on May 25, 2011 8:51 AM

Source System Conversion in Remote Process Chain

Hi all!
I' working with BI7 SP12 and facing the following problem:
There is no source system conversion for Remote Process Chains, when transporting Process Chains with Remote Process Chains from DEV to QA.
First the following warning appears:
DEV-Destination of Remote Process Chain does not exist on QA-System.
==> The is correct because the DEV-Destination should have been converted to QA-Destination.
Then the following error appears:
Process Chain with the Remote Process Chain was not succesfully checked.
All source system conversion tables are maintained correctly!
The source system conversion works for example for InfoPackages correctly.
But for Remote Process Chain there is neither source system conversion for the Destination nor for Callback Destination. Both should be converted.
Do I have to do it manually??
Or do I have to create the DEV-Destination in SM59 on the QA-System??
==> We want to avoid this...
Thanks for any ideas...
kj

Please note:
When I create the DEV-Destination in SM59 on the QA-System,
the transport gets no warnings and no errors...
But there is still no conversion of the source systems for the Destination and the Callback Destination of the Remote Process Chain to QA-Destinations...
So, i think:
There is no automatic source system conversion of Remote Process Chains and I have to adjust it manually in the QA-System...

Error while collecting the process chain in a transport request

Hi Gurus,
I am getting an error while collecting my process chain in a tranpsort request.I have to transport the request from DEV to QA system.
When in RSA1--->transport connection i drag & drop the chain from left to right side pane then the Error occurs.
1.Object 'REQUDELZPAK_48RZW8GZX87CNEH7S897TFQSD' (RSPV) of type 'Process Variants' is not available in version 'A'
Sap help given
You wanted to generate an object with the name 'ZPAK_48RZW8GZX87CNEH7S897TFQSD' (in transport request RSPT) of type 'Process Chain Starter' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
2.Object 'ZPAK_48RZW8GZX87CNEH7S897TFQSD' (RSPT) of type 'Process Chain Starter' is not available in version 'A'
Sap help given
You wanted to generate an object with the name 'REQUDEL ZPAK_48RZW8GZX87CNEH7S897TFQSD' (in transport request RSPV) of type 'Process Variants' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
From one of the threads:
(https://forums.sdn.sap.com/click.jspasearchID=10081153&messageID=4623856)
i though it was the problem of patch level sap note(966131).
Accordingly i tried collecting process chain in the request where the patch level is high(24).But same error is seen.
I have activated chain again & then tried collecting the request i the process chain.But did not solve the error.
I have to collect Process chain in a transport request.Can you help me out to solve the problem?
Thanks in advance!
Regards,
Pallavi

Hi,
take a look:
Data Warehousing
"Errors occurred during post-handling RS_AFTER_IMPORT for MPRO L "
Errors occurred during post-handling RS_AFTER_IMPORT for ROUT L
Try to set the Process Chain Start to Immediate(background jobs) in the schedule, because this will trigger the process chain once tranported and may cause similar errors.
Regards
Andreas

Error while running the process chain

Hi, I am getting following error while running the process chain.
"Lock NOT set for: Deleting the data completely from a data target"
Please suggest.
amit

hi,
This is due to a lock on the objects which is being used by ur load.
Even if master data used by this would be in a lock by an attribute change run. wait till that attribute change run finishes and then repeat.
If this target itself is locked by someother process like rollup , compression , this error would appear. In this case also repeat the step after those locking process finish.
some general locks during loading:
Sometimes parallel processing in DTP might lead to this, its better set the DTP and infopackage in serial processing. In this case change the settings and then repeat the process.
There is a specific case in which the Serial DTP gets locked by itself, in this case repeat it untill it succeeds.
You can identify the above scenario as below. This is applicable only if the DTPs processing mode is serial.
if u see in SM 37 this load would have three DTP processes running.
it should have only two.
In this case cancel the process and repeat it untill u get it right.
hope this helps u
regard,
ranjith
Edited by: Ranjith Kumar Murugesan on Sep 12, 2008 10:44 AM
Edited by: Ranjith Kumar Murugesan on Sep 12, 2008 10:46 AM

RFC ERROR while running BI Process Chain

I'm recieving the following error while running certain Process Chains in BI.
RFC error: FAILED
RFC Message: FAILED
The system log in BI shows the following.
Communication error, CPIC return code 017, SAP return code 672
672 Logon to Netweaver failed
Other process chains work correctly via CPS.
Any Ideas?
Thanks

This looks like a BW problem. Do you get the same message when you submit it manually in SAP?

How to run remote process chain asynchronous?

Hi,
I have a situation where I would like to call a remote process chain asynchronous insted of the usual synchronous way.
The docs on http://help.sap.com/saphelp_nw04/helpdata/en/86/6ff03b166c8d66e10000000a11402f/content.htm
states that: The remote process transfers the communication with the other system and synchronously starts the executed process chain.
...but since I don't want it to be synchronous, I am looking for other ideas...
Best regards,
Christian Frier

I found that it did not work tried to trigger the event on a remote system.
If I call BP_EVENT_RAISE I can trigger an event and thereby start a process chain on my source system (local). If I specify TARGET_INSTANCE nothing seems to happen in the remote system...
Also I cannot call BP_EVENT_RAISE with RFC as it is not remote enabled.
It think the solution is to trigger a local chain that takes care of starting the remote chain. The net effect is that it is asynchronous.

REG: Remote Process chain

Hi Gurus,
I've a requirement that:
In SAP R/3 system user enters data for the planning and saves the data through a transaction code. Then i need to get the data into BI automatically, which ever the data user enters.
Please tell me whether i can use the remote process chain, if yes, please tell how can i achieve this.
or is there any other method to achieve this.
Thanks in Advance
Regards,
Ravi kanth

Hi Ravi......
Remote Process chain is a different concept..........u don't need that.........
Check this.........
http://help.sap.com/saphelp_nw04/helpdata/en/86/6ff03b166c8d66e10000000a11402f/frameset.htm
Look ..........what u need to do is to simply schedule a process chain.........which will automatically load data from R/3 to the BI.........When users enter data............they will be saved in some table..........either u can use Standard datasource .........if available..........otherwise u create Generic datasource(RSO2)..........and schedule the load........
To automate the Process..........either u create an Event based chain..........or a Time based chain......
To schedule a Event based process chain....
1) First create an Event in SM62...
2) Then Create a Job in SM36......In the first screen give the Job name >> Enter >> Then in the ABAP Program name : BTC_EVENT_RAISE...and in the varian name give the Event name that u hav created...save it and come out..
3) Then scedule the Job for a particular time ............for this ..click on the Start Condition tab >> Date/Time.....here give the date on which for the first time this job is going to run and the time...as per ur requirement......Click on Periodic Values tab....there give how frequent u want the job to run....Daily..Weekly...or Monthly...
When this job will run ....it will raise the Event....Now Maintain this event as the Start condition of the First Process chain.......To do this............open the chain in Planning mode..........u can open the chain using the tcode : RSPC1 >> Right click on the Start process >> Display Variant >> Click on After Event..........there u maintain the event name...........So whenever this job will run...it will raise the event...and this event in turn will trigger the chain...........
To Schedule a Time based process chain.......
Open the chain in Planning mode..........u>> Right click on the Start process >> Display Variant >> Click on Date/Time..............here give the date on which for the first time this job is going to run and the time...as per ur requirement......Click on Periodic Values tab....there give how frequent u want the job to run....Daily..Weekly...or Monthly...
Hope this helps.......
Regards,
Debjani.......

Remote Process Chains Source Systems mapping issues

Hi,
We have a process chain in APO system, which upon success calls another process chain in BW.   We recently implemented SCM5/BI7, and taking the advantage of remote chains functionality to call the BW chain from APO.
However, when we transported the APO process chain from DEV to QA, the source systems in the remote chain are still pointing to DEV systems.   We were expecting to see both APO and BW source systems getting switched from DEV to QA.
We have already verified the logical mappings for Sources Systems are in place under RSA1 | Transport Connect | Conversion.   Also, the source systems seem to map correctly for other objects like data sources etc..   Only issue is with the remote chain.
Is there any other setting which need to be set to make it work.   Any help or guidance will be greatly appreciated.
Thanks in advance,
Ravi Chitluru.

Ravi,
I have a similar situation. Can you explain how to run process chains in APO which can gets data from BW cubes, which in turn gets data from R/3.
In this equation R/3->BW->APO, what are the options like 1)run process chains in BW system to pull data from R/3 into BW and run process chains to load BW data into APO 2)run remote process chains to pull data from R/3 into APO(of course via BW).

Hierarchy info-package list not available when adding to process chain.

Knowledgable experts:
We are on BI 7.0 and I'm trying to add an info-package for a hierarchy load to a process chain.
The process chain already exists with master data text loads and attribute loads.
I want to add a hierarchy load to the process chain.
- When I select Execute Infopackage process type the pop up box to 'Insert Execute Infopackage' is displayed.
- The Load Data dropdown box does not display any infopackages to choose from. The infopackage does exist and executes correctly.
Why can't I see any infopackages in the dropdown box?
We are on SAPKW70013 Support package.
Thanks for your assistance.
Den

Thanks for the quick reply.
This is a new install, no upgrade.
I think I found that I need to do a Save Hierarchy process type to get the hierarchy in the process chain.
However, I would still have the question, why I don't see any of my transaction data loads that are in 3.x formats?
I will look at the OSS note.
Thanks
Den

Error while Activating a process chain

Hi,
I have just modified the existing process chain with the new info package for loading into ODS and then delta update into the Info Cube.
when i am clicking on the option schedule and activate.
Its giving error as :
"InfoPackage ZPAK_49RJW545FSO2MB3NF1MIZ9NJ9 is
generated; NOT able to be used as loading variant"
This is a IP, which is used for delta update from ODS to cube.
I have checked the IP, its fine like i can do the delta through this pacakge manually.
Please help, points will be rewarded....

Dear himanshu arora ,
Go and check whether the Info Package exist ,
You can check in Rsa1 and give IP name and find it.
If your IP is not there please create it,
If tehre please check the all parameter associated with it.
Also go through these
Process Chain Errors
/people/mona.kapur/blog/2008/01/14/process-chain-errors
Process chain creation - step by step
/people/juergen.noe/blog/2008/01/11/process-chain-creation--step-by-step
Data Load errors and Process chains
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
ope the following links will give u a clear idea about process chains and clear ur doubts.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/sap-teched-03/using%20process%20chains%20in%20sap%20business%20information%20warehouse
Business Intelligence Old Forum (Read Only Archive)
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9936e790-0201-0010-f185-89d0377639db
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/263de690-0201-0010-bc9f-b65b3e7ba11c
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
Siggi's weblogs for data load error and how to restart process chain
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
Hope it helps
Regards
Bala

Error on step in process chain

Hello All,
I have just scheduled a process chain immediately and it is running. One step (A full update) has gone red with error "Object requested is currently locked by user DCKIBUUK" - DCKIBUUK is my username. 11 out of 26 Data Packages have processesed OK. Data Package number 12 is where the error occured. Please advise on what to do.
Thank you and kind regards,
Keith

The first thing is to unlock the node of the process chain which has been locked by you. So you need to come out of the infopackage in question.
Now, right-click on the node that failed and use the "Repeat" option. If the repeat does not exist , you have 2 options :
1. manually run the remaining steps
2. Manually make the system believe that the failed node went in successfully by forcing the status of the step to "G".
Hope this helps .

Reg. Error while Full load - process chain

Hi,
I am running a process chain, which is a full load. In Manage screen it is in RED status whereas, While i chekced in Monitor screen it is showing as "Missing messages" . While I checked in the error and warning messages, I found that the data packet should be run manually. So I tried Manual update option by killing the job manually. After doing this i tried to run the same process with "Back to Technical Status" option. While performin this again i got an error saying "REQUXXXX terminated, as data packet 0000XX could not be locked"
How this error can be rectified.
Please advice.
Thanks in advance!!!
Regards,
Melissa

Hi Melissa.....
While i chekced in Monitor screen it is showing as "Missing messages"........where did u got the message.............in the data packet.......right...........?..........
I found that the data packet should be run manually. So I tried Manual update option by killing the job manually..................which job u hav killed........? Extraction Job?If u hav killed the Extraction job........then Manual update is not possible..............Manual update is only possible when the Extraction job will get completed successfully........
Due to this u r getting the Error Message error saying "REQUXXXX terminated, as data packet 0000XX could not be locked"....................When the request itself does'nt exist............how could u do Manual update for that deletedrequuest........
Then only option is..............make the QM status red.............delete the request from the target and repeat the load.........
Hope this helps.......
Regards,
Debjani........

Error while executing the Process chain

Hi Friends,
The process chain that I scheduled is getting failed at the Infopackage loading stage.
On checking the diplay message, I found the following log:
Cannot stage requested data for datasource
Error in source system
I activated the datasource in source system, then replicated the same and tried to load data.
But the issue remains the same.
I checked in RSA7. The status corresponding to this datasource is in yellow status.
Can I delete this entry and try again?
Please suggest.
Thanks in advance.
Surjit P

Hi,
/people/mona.kapur/blog/2008/01/14/process-chain-errors
Deadlock
http://help.sap.com/saphelp_nw04s/helpdata/en/2e/44934257a5c86ae10000000a155106/frameset.htm
Dead Locks
2. Error in unit conversion
Units of measure
3.Error 1 in update
When Src file is already open or not accessible.
4.Processing no data
theres no data selected after extraction
5.Caller 70 missing
" This error normally occurs whenever BW encounters error and is not able to classify them. There could be multiple reasons for the same
1) Whenever we are loading the Master Data for the first time, it creates SIDs. If system is unable to create SIDs for the records in the Data packet, we can get this error message.
2) If the Indexes of the cube are not deleted, then it may happen that the system may give the caller 70 error.
3)Whenever we are trying to load the Transactional data which has master data as one of the Characteristics and the value does not exist in Master Data table we get this error. System can have difficultly in creating SIDs for the Master Data and also load the transactional data.
4) If ODS activation is taking place and at the same time there is another ODS activation running parallel then in that case it may happen that the system may classify the error as caller 70. As there were no processes free for that ODS Activation.
5) It also occurs whenever there is a Read/Write occurring in the Active Data Table of ODS. For example if activation is happening for an ODS and at the same time the data loading is also taking place to the same ODS, then system may classify the error as caller 70.
6) It is a system error which can be seen under
the Status tab in the Job Over View.
solution:
" If the Master Data is getting loaded for the first time then in that case we can reduce the Data Package size and load the Info Package. Processing sometimes is based on the size of Data Package. Hence we can reduce the data package size and then reload the data again. We can also try to split the data load into different data loads
If the error occurs in the cube load then we can try to delete the indexes of the cube and then reload the data again.
If we are trying to load the Transactional and Master Data together and this error occurs then we can reduce the size of the Data Package and try reloading, as system may be finding it difficult to create SIDs and load data at the same time. Or we can load the Master Data first and then load Tranactional Data
If the error is happening while ODS activation cause of no processes free, or available for processing the ODS activation, then we can define processes in the T Code RSCUSTA2.
If error is occurring due to Read/Write in ODS then we need to make changes in the schedule time of the data loading.
Once we are sure that the data has not been extracted completely, we can then go ahead and delete the red request from the manage tab in the InfoProvider. Re-trigger the InfoPackage again.
Monitor the load for successful completion, and complete the further loads if any in the Process Chain.
6.Idoc not processed completely.
Here the request remains yellow (in process) and with the same details (as seen in the details tab of the monitor) for an abnormally long time. Many-a-times, the port for communication is not open and re-starting the load helps. For long running jobs, it may not be advisable to restart the extraction
Contact the BASIS administrator to push the IDOC.
look into these links:
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
For common data load errors check this link:
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Majority of the issues will be based on these things only..
Hope the following links will give u a clear idea about process chains and clear ur doubts.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/sap-teched-03/using%20process%20chains%20in%20sap%20business%20information%20warehouse
Business Intelligence Old Forum (Read Only Archive)
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9936e790-0201-0010-f185-89d0377639db
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/263de690-0201-0010-bc9f-b65b3e7ba11c
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
Siggi's weblogs for data load error and how to restart process chain
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
Hope this helps.
pls award me some points
thanks.
Thanks

Error in adding remote process chain to existing one

Similar Messages

Maybe you are looking for