Error in Agent Installation - oracle Configuration Manager

Hi All,
I m trying to install Agent using this file "Linux_Grid_Control_agent_download_10_2_0_2_0". In between the installation "i got one screen - "oracle configuration manager proxy setting" even it is optional and i have not checked it .... it is not going next. i dont want to configure it (but when i give values proxy ip and port, not accept it). When I click the next button getting the message "The connection to oracle Configuration Manager can not be established, please check your network connection and proxy settings and try again"
Please help with this
Thanks
Shiju

Hi Shiju,
Is there any specific reason for using 10.2.0.2 agent. The latest Grid Control agent release is 10.2.0.5. I would suggest you to install the same. Also you can configure the OCM at a later point of time.
Hope it helps
--Lai

Similar Messages

Problem with installation Oracle VM Manager 3.0.1 in Oracle Linux 6.1

Dear all specialists.
I have tried many times to install Oracle VM Manager 3.0.1 in Linux 6.1 but still not get success.
I try to install it by folowing VM Documentation 3.0 and http://www.itnewscast.net/oracle-vm-manager-30-installation. When I try to stall it I see many error messages regarding to hardware and software requirement of Orace VM Manager 3.0.1. When those error message stop appear, it can be only installed abit, it seem hang and then error message appears as below.
I will show all my installation steps and problem as below:
I try to install on Dell PowerEdge 1950 (300GB, RAM : 8GB) and Sun X4150 (HDD: 160GB, RAM: 4GB)
[root@ovmger home]# /etc/init.d/iptables stop && chkconfig iptables off
[root@ovmger home]# rpm -qa libaio unzip
unzip-6.0-1.el6.x86_64
libaio-0.3.107-10.el6.x86_64
[root@ovmger ~]# groupadd dba
[root@ovmger ~]# useradd -g dba oracle
[root@ovmger ~]# passwd oracle
Changing password for user oracle.
New password:
BAD PASSWORD: it is based on a dictionary word
Retype new password:
passwd: all authentication tokens updated successfully.
[root@ovmger ~]# vi /etc/security/limits.conf
<domain> <type> <item> <value>
#* soft core 0
#* hard rss 10000
#@student hard nproc 20
#@faculty soft nproc 20
#@faculty hard nproc 50
#ftp hard nproc 0
#@student - maxlogins 4
oracle hard nofile 8192
oracle soft nofile 8192
oracle soft nproc 4096
oracle hard nproc 4096
oracle soft core unlimited
oracle hard core unlimited
# End of file
wq!
[root@ovmger ~]# mkdir -p /u01/app/oracle
[root@ovmger ~]# chown oracle:dba /u01/app/oracle
[root@ovmger ~]# vi /etc/hosts
127.0.0.1 localhost.localdomain localhost
192.168.0.98 ovmger
wq!
[root@ovmger ~]# ls
anaconda-ks.cfg Downloads Music Public
Desktop install.log OracleVM-Manager-3.0.1.iso Templates
Documents install.log.syslog Pictures Videos
[root@ovmger ~]# mkdir -p /home/oracle/mount-point
[root@ovmger ~]# clear
[root@ovmger ~]# mount -o loop OracleVM-Manager-3.0.1.iso /home/oracle/mount-point/
[root@ovmger ~]# cd /home/oracle/mount-point/
[root@ovmger mount-point]# ls
components EULA oracle-validated.params runInstaller.sh
createOracle.sh LICENSE ovmm-installer.bsx
[root@ovmger mount-point]# ./runInstaller.sh
Oracle VM Manager Release 3.0.1 Installer
Oracle VM Manager Installer log file:
/tmp/ovmm-installer.selfextract_CAjaQM/install-2011-10-13-165911.log
Please select an installation type:
1: Simple
2: Standard
3: Uninstall
4: Help
Select Number (1-4): 1
Starting simple installation ...
Verifying installation prerequisites ...
One password is used for all users created and used during the installation.
Enter a password for all logins used during the installation:
Enter a password for all logins used during the installation (confirm):
Verifying configuration ...
Start installing the configured components:
1: Continue
2: Abort
Select Number (1-2): 1
Step 1 of 9 : Database ...
Installing Database ...
Retrieving Oracle Database 11g XE ...
Installing Oracle Database 11g XE ...
Configuring Oracle Database 11g XE ...
/home/oracle/mount-point/./ovmm-installer.bsx: line 137: 26564 Killed
python setup.py $DIRPARAM $CONFIGPARAM $UUIDPARAM $INSTALLTYPEPARAM $ASSU MEYESPARAM
I have been waiting for maybe 3 hours and then error appears the message as above
Please kindly give advice to solve this problem as soon as possible.
Thank in advance,
Best regards,
Heng
Edited by: user9032138 on Oct 13, 2011 12:13 AM

Dear Avi Miller,
I have successfully installed both of servers (VM Server 3.0.2 & VM Manager 3.0.2) as below
+ VM Server 3.0.2 on Dell PowerEdge 1950
+ VM Manager 3.0.2 in OEL 6.1 on Sun Fire X4100M2 Server
Refer to Oracle VM Server 3.0 Document, they recommend to do Discover Oracle VM Servers to VM Manager first of all step then do anything else like Creating a Server Pool so I try to do Discover Oracle VM Servers in many times but still not success.
What I try to do Discover Oracle Servers as below:
After I install both already I start to Discover Oracle VM quickly
1. Log into Oracle VM Manager
2. Select the Hardware view.
3. Select Discover from the Actions menu. The Discover Servers dialog box is displayed.
4. Enter information about the Oracle VM Server(s) to be discovered.
5. Specify an IP Address (or rang): IP_of VM Server and Click Add
6. Put password of VM Server Agent
7. Click OK
Wait a minute the Status of VM Manager show fail and when I click Detail it show as below:
Job Construction Phase
begin()
Appended operation 'Discover Manager Server Discover' to object 'OVM Foundry : Discover Manager'.
commit()
Completed Step: COMMIT
Objects and Operations
Object (IN_USE): [Server] 44:45:4c:4c:46:00:10:37:80:57:c4:c0:4f:32:33:4a (vmserver)
Object (IN_USE): [DiscoverManager] OVM Foundry : Discover Manager
Operation: Discover Manager Server Discover
Job Running Phase at 11:51 on Sat, Nov 5, 2011
Job Participants: []
Actioner
Starting operation 'Discover Manager Server Discover' on object 'OVM Foundry : Discover Manager'
Setting Context to model only in job with id=1320468663398
Job Internal Error (Indeterminate)java.lang.NullPointerException
at com.oracle.ovm.mgr.discover.DiscoverEngine.handleDiscover(DiscoverEngine.java:450)
at com.oracle.ovm.mgr.discover.DiscoverEngine.discoverNewServer(DiscoverEngine.java:345)
at com.oracle.ovm.mgr.discover.DiscoverEngine.discoverServer(DiscoverEngine.java:265)
at com.oracle.ovm.mgr.op.manager.DiscoverManagerServerDiscover.action(DiscoverManagerServerDiscover.java:48)
at com.oracle.ovm.mgr.api.job.JobEngine.operationActioner(JobEngine.java:191)
at com.oracle.ovm.mgr.api.job.JobEngine.objectActioner(JobEngine.java:257)
at com.oracle.ovm.mgr.api.job.InternalJobDbImpl.objectCommitter(InternalJobDbImpl.java:1019)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:223)
at com.oracle.odof.core.BasicWork.invokeMethod(BasicWork.java:136)
at com.oracle.odof.command.InvokeMethodCommand.process(InvokeMethodCommand.java:100)
at com.oracle.odof.core.BasicWork.processCommand(BasicWork.java:81)
at com.oracle.odof.core.TransactionManager.processCommand(TransactionManager.java:751)
at com.oracle.odof.core.WorkflowManager.processCommand(WorkflowManager.java:395)
at com.oracle.odof.core.WorkflowManager.processWork(WorkflowManager.java:453)
at com.oracle.odof.io.AbstractClient.run(AbstractClient.java:42)
at java.lang.Thread.run(Thread.java:662)
FailedOperationCleanup
Starting failed operation 'Discover Manager Server Discover' cleanup on object 'OVM Foundry : Discover Manager'
Complete rollback operation 'Discover Manager Server Discover' completed with direction=OVM Foundry : Discover Manager
Rollbacker
Objects To Be Rolled Back
Object (IN_USE): [Server] 44:45:4c:4c:46:00:10:37:80:57:c4:c0:4f:32:33:4a (vmserver)
Object (IN_USE): [DiscoverManager] OVM Foundry : Discover Manager
Completed Step: ROLLBACK
Job failed commit (internal) due to java.lang.NullPointerException
at com.oracle.ovm.mgr.discover.DiscoverEngine.handleDiscover(DiscoverEngine.java:450)
at com.oracle.ovm.mgr.discover.DiscoverEngine.discoverNewServer(DiscoverEngine.java:345)
at com.oracle.ovm.mgr.discover.DiscoverEngine.discoverServer(DiscoverEngine.java:265)
at com.oracle.ovm.mgr.op.manager.DiscoverManagerServerDiscover.action(DiscoverManagerServerDiscover.java:48)
at com.oracle.ovm.mgr.api.job.JobEngine.operationActioner(JobEngine.java:191)
at com.oracle.ovm.mgr.api.job.JobEngine.objectActioner(JobEngine.java:257)
at com.oracle.ovm.mgr.api.job.InternalJobDbImpl.objectCommitter(InternalJobDbImpl.java:1019)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:223)
at com.oracle.odof.core.BasicWork.invokeMethod(BasicWork.java:136)
at com.oracle.odof.command.InvokeMethodCommand.process(InvokeMethodCommand.java:100)
at com.oracle.odof.core.BasicWork.processCommand(BasicWork.java:81)
at com.oracle.odof.core.TransactionManager.processCommand(TransactionManager.java:751)
at com.oracle.odof.core.WorkflowManager.processCommand(WorkflowManager.java:395)
at com.oracle.odof.core.WorkflowManager.processWork(WorkflowManager.java:453)
at com.oracle.odof.io.AbstractClient.run(AbstractClient.java:42)
at java.lang.Thread.run(Thread.java:662)
Sat Nov 05 11:51:05 ICT 2011
com.oracle.ovm.mgr.api.exception.FailedOperationException: java.lang.NullPointerException
at com.oracle.ovm.mgr.discover.DiscoverEngine.handleDiscover(DiscoverEngine.java:450)
at com.oracle.ovm.mgr.discover.DiscoverEngine.discoverNewServer(DiscoverEngine.java:345)
at com.oracle.ovm.mgr.discover.DiscoverEngine.discoverServer(DiscoverEngine.java:265)
at com.oracle.ovm.mgr.op.manager.DiscoverManagerServerDiscover.action(DiscoverManagerServerDiscover.java:48)
at com.oracle.ovm.mgr.api.job.JobEngine.operationActioner(JobEngine.java:191)
at com.oracle.ovm.mgr.api.job.JobEngine.objectActioner(JobEngine.java:257)
at com.oracle.ovm.mgr.api.job.InternalJobDbImpl.objectCommitter(InternalJobDbImpl.java:1019)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:223)
at com.oracle.odof.core.BasicWork.invokeMethod(BasicWork.java:136)
at com.oracle.odof.command.InvokeMethodCommand.process(InvokeMethodCommand.java:100)
at com.oracle.odof.core.BasicWork.processCommand(BasicWork.java:81)
at com.oracle.odof.core.TransactionManager.processCommand(TransactionManager.java:751)
at com.oracle.odof.core.WorkflowManager.processCommand(WorkflowManager.java:395)
at com.oracle.odof.core.WorkflowManager.processWork(WorkflowManager.java:453)
at com.oracle.odof.io.AbstractClient.run(AbstractClient.java:42)
at java.lang.Thread.run(Thread.java:662)
Sat Nov 05 11:51:05 ICT 2011
at com.oracle.ovm.mgr.api.job.InternalJobDbImpl.objectCommitter(InternalJobDbImpl.java:1069)
at sun.reflect.GeneratedMethodAccessor791.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:223)
at com.oracle.odof.core.BasicWork.invokeMethod(BasicWork.java:136)
at com.oracle.odof.command.InvokeMethodCommand.process(InvokeMethodCommand.java:100)
at com.oracle.odof.core.BasicWork.processCommand(BasicWork.java:81)
at com.oracle.odof.core.TransactionManager.processCommand(TransactionManager.java:751)
at com.oracle.odof.core.WorkflowManager.processCommand(WorkflowManager.java:395)
at com.oracle.odof.core.WorkflowManager.processWork(WorkflowManager.java:453)
at com.oracle.odof.io.AbstractClient.run(AbstractClient.java:42)
at java.lang.Thread.run(Thread.java:662)
End of Job
If you have success experience on this, please kindly help to share to me.
Please kindly give some advise for this.
Thank in advance,
Best regards,
Heng
Edited by: user9032138 on Nov 4, 2011 9:56 PM
Edited by: user9032138 on Nov 4, 2011 10:03 PM

Registration Service is unavailable (500); Oracle Configuration Manager

Getting error while installing OCM in red hat 4 linux server.
setupCCR -R ocm.rsp
** Registering installation with Oracle Configuration Manager server(s) **
Failure in registering with Oracle Configuration Manager server
Error encountered in registering. Registration Service is unavailable (500).

i am using proxy server , a day back it is wrking fine , but today i am seeing this error.
How can i test opening web page from my server ?Please let me know the steps?

Oracle configuration manager proxy setting

Hello,
I m trying to install Agent speratly using this file
"Linux_Grid_Control_agent_download_10_2_0_2_0"
after unzip and using runninstaller......
but durring asking the configuration it ask for the
"oracle configuration manager proxy setting"
even it is opptional and i hav not checked it .... it is not going next.
i dont want to configure it (but when i give values proxy ip and port, not accept it).
plz solve this issue
Thanx.

Whats error it throw on pressing next
please paste the install action log

Oracle Configuration Manager in DB without XDB

As subject says, is that possible or is XDB mandatory?

Sure thing. Well, the important thing is that this db (first I tried) is OEM repository. Start of OCM is followed by:
WARN: Oracle Configuration Manager database objects are not in sync with
the installed configuration collection scripts.
Refer to the Installation and Configuration documentation on reloading the
SQL collection packages.
SID Script
EMREP collectconfig
running ccr/admin/scripts/installCCRSQL.sh collectconfig results in:
SQL> DECLARE
2 l_instvers VARCHAR2(100);
3 BEGIN
4
5 -- Drop the Network ACL if the ACL was created.
6 select LPAD(version,10,'0') into l_instvers from v$instance;
7 IF l_instvers >= '11.0.0.0.0' THEN
8 EXECUTE IMMEDIATE
9 'DECLARE
10 l_comp_cnt NUMBER;
11 l_regexp_match NUMBER;
12 TYPE p_acl_ids_type IS TABLE OF VARCHAR2(4000);
13 TYPE p_acl_priv_type IS TABLE OF NUMBER;
14 l_acl_ids p_acl_ids_type;
15 l_acl_privs p_acl_priv_type;
16 l_acl_cnt NUMBER;
17 BEGIN
18 -- check for XML DB installed
19 select count(*) into l_comp_cnt from dba_registry where COMP_NAME = ''Oracle XML Database'' and STATUS = ''VALID'';
20 IF l_comp_cnt > 0 THEN
21 -- drop the entire ACL if it is the one we created
22 select count(*) into l_regexp_match from dba_network_acls where regexp_like(acl,''.oracle-sysman-ocm-Resolve-Access.xml$'');
23 IF (l_regexp_match > 0) THEN
24 DBMS_NETWORK_ACL_ADMIN.DROP_ACL(''oracle-sysman-ocm-Resolve-Access.xml'');
25 COMMIT;
26 END IF;
27
28 -- check for resolve privilege for OCM user
29 -- get all ACLIDs and whether ORACLE_OCM has resolve privilege through each
30 BEGIN
31 SELECT acl, DBMS_NETWORK_ACL_ADMIN.CHECK_PRIVILEGE_ACLID(aclid, ''ORACLE_OCM'', ''resolve'') acl_priv
32 BULK COLLECT INTO l_acl_ids, l_acl_privs
33 FROM dba_network_acls;
34 EXCEPTION
35 WHEN OTHERS THEN NULL;
36 END;
37 -- walk the collection
38 FOR i IN 1..l_acl_ids.count LOOP
39 BEGIN
40 IF (l_acl_privs(i) IS NOT NULL AND l_acl_privs(i) > 0) THEN
41 -- remove resolve privilege
42 DBMS_NETWORK_ACL_ADMIN.DELETE_PRIVILEGE(acl => l_acl_ids(i),principal => ''ORACLE_OCM'');
43 COMMIT;
44 END IF;
45 EXCEPTION
46 WHEN OTHERS THEN NULL;
47 END;
48 END LOOP;
49 END IF;
50 END;';
51
52 END IF;
53 END;
54 /
DECLARE
ERROR at line 1:
ORA-06550: line 14, column 46:
PL/SQL: ORA-00942: table or view does not exist
ORA-06550: line 14, column 5:
PL/SQL: SQL Statement ignored
ORA-06550: line 16, column 7:
PLS-00201: identifier 'DBMS_NETWORK_ACL_ADMIN.DROP_ACL' must be declared
ORA-06550: line 16, column 7:
PL/SQL: Statement ignored
ORA-06550: line 25, column 14:
PL/SQL: ORA-00942: table or view does not exist
ORA-06550: line 23, column 7:
PL/SQL: SQL Statement ignored
ORA-06550: line 34, column 11:
PLS-00201: identifier 'DBMS_NETWORK_ACL_ADMIN.DELETE_PRIVILEGE' must be
declared
ORA-06550: line 34, column 11:
PL/SQL: Statement ignored
ORA-06512: at line 8

How to configure Oracle Configuration Manager in R12.0.4

Dear
I need to configure oracle configuration manager for my running R12.0.4 instance on single node setup.Whenever i try update my metalink credentials in oracle application manager dashboard,it says userid or password is wrong. While installation i skip the OCM screen. How can i configure it now either using Universal installer or comand line? Need all steps for setup?
Do i need to download & install OCM client or is it already shipped with software & needs just configuration setup?
Help me!
Regards

Ateeq,
Running AutoConfig should populate profile options with the correct values. However, you can check the values after running AutoConfig to verify it.
According to metalink document id, this Applications Server-Side Proxy Host And Domain profile needs to changed. Document id, will mention later.I forgot.Below are the notes:
Note: 297689.1 - Unable to update MetaLink credentials from OAM
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=297689.1
Note: 308369.1 - Unable to Connect to MetaLink from OAM After Updating MetaLink Credentials
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=308369.1

How do I install Oracle Configuration Manager in oracle Fusion - discoverer 11i

Hello Gurus,
I need some guidance to install Oracle Configuration Manager.
I have just successfully installed Oracle Fusion - following "Fusion Middleware Installation Guide for Oracle Portal, Forms, Reports and Discoverer 11g Release 1 (11.1.1.6.0) (Part Number E10421-07)" without OCM. I have EBS 12.1.3 and rdbms 11.2.0 on the same server.
Thanks
Mathias

ikaros wrote:
I have installed OracleAS 10g. What should I download now in order to install Oracle Portal 10g?Portal (actually Portal and wireless) is one of the three installation types of a full-fledged OAS 10g in release 1 and 2.
You need to have an infrastructure as a pre-requisite for a portal type OAS installation.
Please see this [link and the whole guide - click Content on the top-right|http://download.oracle.com/docs/cd/B14099_19/win.1012/install.1012/install/mt.htm#sthref508] for details and then decide what have you installed that you are referring to as OAS 10g.
thanks,
AMN

Oracle Configuration Manager - EBS R12.1.1

Hi ,
EBS R12.1.1, on OEL 5.4
Is there forums for Oracle Configuration Manager?
I am trying to configure it, but as usual the docs is very topsiturvy.
Identifying If Oracle Configuration Manager Is Already Installed or Configured
Oracle Configuration Manager is included with many Oracle product lines. To verify if
it has been included, check for the presence of the ccr directory under $ORACLE_
HOME. If the ccr directory exists, you must verify whether it has been configured.
■ Navigate to the ccr/bin directory and locate emCCR. If emCCR exists, OCM has
been configured.
■ If emCCR is not present under the ccr/bin directory, OCM has been installed but
not configured.
If the ccr directory does not exist, Oracle Configuration Manager has not been
included with your Oracle release.
Note: For the middle-tier of Oracle E-Business Suite Release 12
installations, check for the presence of the ccr directory under the
$INST_TOP/ocm/10.1.2/ and $INST_TOP/ocm/10.1.3/
directories.
For the database tier, the ccr directory can be found
under $ORACLE_HOME.I searched the "ccr" at the apps tier:
[appldev1@apps1 ~]$ cd /u01/appldev1
[appldev1@apps1 appldev1]$ ls
DEV1
[appldev1@apps1 appldev1]$ find . -name "ccr"
./DEV1/apps/tech_st/10.1.3/ccr
./DEV1/apps/tech_st/10.1.2/ccr
./DEV1/apps/apps_st/appl/fv/12.0.0/mds/ccr
./DEV1/apps/apps_st/comn/java/classes/oracle/apps/fv/ccrAnd I searched the "ccr" at the database tier:
[root@apps1 ~]# cd /u02/oradev1
[root@apps1 oradev1]# find . -name "ccr"
./DEV1/db/tech_st/11.1.0/ccrWhy is that there are lots of "ccr" directories in the appstier?
And there is also existing on the dbTier.
Where should I install the OCR? in the apps tier or db tier or both?
Thanks a lot
MsK

Hi user;
If you follow Note:Oracle Configuration Manager and E-Business Suite Release 12 Release Notes [ID 406369.1]
As you can see in note +"Starting with Release 12, Oracle has updated the Oracle E-Business Suite Rapid Install, Rapid Clone, and AutoConfig tools to incorporate support for installing and configuring OCM."+
Please check your Applications context file via section 1. The information will appear in your in the following variables:
After you confirm this,please check Section 2: Configuring OCM after Installing Release 12
Modify your Applications context file on each node to add the CSI, OracleMetaLink user name, country code, and proxy values.
Its mean take backup of Applications context file on each node than add add upper information to your Applications context file on each node and run autconfig each node.(For adding parameter,please follow section 1. The information will appear in your in the following variables: )
If you dont know how you can edit Applications context file please check:
Using AutoConfig to Manage System Configurations in Oracle E-Business Suite Release 12 [ID 387859.1]
Regard
Helios

Oracle Configuration Manager - No database target

Hi,
i've installed the latest version of the oracle configuration manager (10.3.3.1.0) in my database home and ran the installCCRSQL.sh script successfully against the database instance.
Unfortunately i don't see any database instance target in the metalink system section nor if i run the "emCCR disable_target" command. A "Host", "Oracle Home" and a "Oracle Configuration Manager" target are available.
For the installation, i set the following environment variables:
ORACLE_CONFIG_HOME=/oracle/product/11.1.0/db_1
OLDPWD=/oracle/product/11.1.0/db_1/ccr/bin
ORACLE_SID=MIST
ORACLE_BASE=/oracle
TNS_ADMIN=/oracle/admin/network
HOME=/home/oracle
ORACLE_HOME=/oracle/product/11.1.0/db_1
I'm running oracle enterprise linux 5.4 and oracle database 11.1.0.7.
Can anyone tell me why I don't have a database instance target?
Regards,
P. Liniger

anyone?

Oracle Configuration Manager Server is unavailable (500)

I have a few targets that report configuration to My Oracle Support using Oracle Configuration Manager. Everything was fine until last week, when I noticed that the Last Collection Date wasn't changing. When I try to manually collect, I get the following error:
E:\>ora11\product\11.2.0\dbhome_1\ccr\bin\emccr collect
Oracle Configuration Manager - Release: 10.3.8.1.1 - Production
Copyright (c) 2005, 2013, Oracle and/or its affiliates. All rights reserved.
Unable to determine if mandatory packages available.
Error encountered in retrieving update. Oracle Configuration Manager Server is u
navailable (500).
Collection and upload failed.
E:\>
Anybody else experiencing this same problem? If so, any ideas how to fix it?

Turns out this is expected, as Oracle is rolling out a database upgrade. This notice is posted on MOS:
Configuration Data in Read-Only Mode
We are making improvements to the database that holds configuration data for My Oracle Support. During this upgrade, the Customer Configuration Repository (CCR) is currently in read-only mode. You can view configuration data, but will not be able to upload new configurations or change configuration-related systems attributes. The CCR will remain in read-only mode until the planned My Oracle Support outage completes this weekend.
While CCR is in read-only mode, you will see an error message:
   In the related log file during an automatic attempt to upload a new configuration or for offline Collector users who upload their configuration as a Service Request attachment.
   On pages within My Oracle Support that access the configuration data
   Primarily under the Systems tab
   Sometimes within Patch recommendations and Health Checks
When the CCR returns to update-mode after the outage, your last successful upload will remain in place as the benchmark for determining differences with the current configuration. The next collection you send will update your configuration and then becomes the configuration used for comparisons.
Please file a non-technical Service Request or contact Oracle Support if you need help or have additional questions.

Is Oracle Configuration Manager Available for Hyperion Planning Servers?

The "My Oracle Support" site (https://support.oracle.com) describes the values of installing the Oracle Configuration Manager on servers.
Question: is this available for the Hyperion products or just Oracle databases? If available for Hyperion products, does it add value to tech support?
Any comments would be appreciated.

John
This is partially correct. If you user12136418 are looking for a way to monitor health automatically and get access to web ex session technical support from one console OCM is a great tool. The fact that it is not a thick client in nature nor a windows service makes it ideal for having agents monitor network traffic SNMP and still have all hyperion health monitored without having to run a tool like SCOM. I have been waiting for this tool for a year . Now if only Hyperion would work with IE8. But we all can not have egg in our beer.
Thank you
Michael Worthylake
Systems Analyst
DJO, LLC
1430 Decision St.
Vista, CA 92081-8553 U.S.A.
Direct: 760-734-5631
Cell: 760-445-0746
www.djortho.com
[email protected]

How to install Oracle Configuration Manager on laptop without Oracle dist?

I'm sure this is the wrong forum to ask this in, but I can't find a better one.
I was trying to file a support case in My Oracle Support, which I haven't done in a long time. It appears to want me to install "Oracle Configuration Manager". I just have WebLogic installed on this box. I don't even have an Oracle installation. The installation instructions for OCM seem to be very complicated, or I'm just missing the "just do this simple thing" instructions.
I downloaded the installer, and I installed it, but when I try to submit a support case, it seems like it thinks it's not installed. It keeps on complaining that I haven't used a stored configuration, but I don't see any way to create one. I imagine that OCM is supposed to help with that, but it's not doing anything obvious.

Thanks for the link! The "Oracle® Database Installation Guide 11g Release 1 (11.1) for Solaris Operating System" link you provided says:
+6.3 Removing Oracle Configuration Manager+
To uninstall Oracle Configuration Manager, follow these steps:
If the $ORACLE_HOME directory contains a database, remove the Oracle Configuration Manager user and the associated objects from the database by running the following script:
SQL> $ORACLE_HOME/ccr/admin/scripts/dropocm.sql
If the database is a repository for the Oracle E-Business Suite, log in to the database as an SYSDBA user and remove the additional objects from the database by running the following script:
+$ORACLE_HOME/ccr/admin/scripts/ebs_dropccr.sql Oracle_Applications_User+
If the database is a repository for Oracle Grid Control, log in to the database as the SYSMAN user and remove the additional objects from the database by running the following script:
+$ORACLE_HOME/ccr/admin/scripts/dropemrep_collect.sql+
To stop the Scheduler and remove the service or the crontab entry, enter the following command:
+$ORACLE_HOME/ccr/bin/deployPackages -d $ORACLE_HOME/ccr/inventory/core.jar+
Delete the ccr directory by entering the following command:
+$ rm -rf $ORACLE_HOME/ccr+
Oracle Configuration Manager is successfully uninstalled.
However, $ORACLE_HOME/ccr/admin/scripts/dropocm.sql does not exist on our system.

Setupccrt.exe has stopped working on Oracle Configuration Manager

I have installed Oracle 11gR2 every thing was fine but at the end when it was cofiguring Oracle Configuration Manager. I got folloing error
setupccr.exe has stopped working.
I am unable to sort it out but my database is working fine and I started working on APEX 4 with oracle. but i am still concerned about this error.
If any one can tell me what i shuold do so that this prob can be solved.
Thanks
Regards
Mazahir Abbas

Thanks for you suggestion, and you right now i am going to put this question on DBA forum, so tht i can get the results.
also thanks for the link, i also found this link when i was searching to soft out this problem, but it was not helpful.
Regards
Mazahir Abbas

How to Uninstall Oracle Configuration Manager (OCM) on 11g

At our site, we need to adhere to the SRR (Security Readiness Review) STIG (Security Technical Implementation Guide), and one of the security "findings" is the presence of Oracle Configuration Manager (OCM). The STIG recommends the deinstallation of OCM (which we have made part of our site standard for 10g), and it cites Oracle MetaLink Notes 369111.1 and 728989.1 as reference material for the deinstallation. Unfortunately, these Oracle documents refer to 10g, not 11g, and the script to deinstall OCM ($ORACLE_HOME/ccr/admin/scripts/dropocm.sql) is missing in 11g.
Does anyone know of a documented way to uninstall OCM in 11g? We are using Oracle 11.1.0.7 on Solaris 10.
Thanks,
J

Thanks for the link! The "Oracle® Database Installation Guide 11g Release 1 (11.1) for Solaris Operating System" link you provided says:
+6.3 Removing Oracle Configuration Manager+
To uninstall Oracle Configuration Manager, follow these steps:
If the $ORACLE_HOME directory contains a database, remove the Oracle Configuration Manager user and the associated objects from the database by running the following script:
SQL> $ORACLE_HOME/ccr/admin/scripts/dropocm.sql
If the database is a repository for the Oracle E-Business Suite, log in to the database as an SYSDBA user and remove the additional objects from the database by running the following script:
+$ORACLE_HOME/ccr/admin/scripts/ebs_dropccr.sql Oracle_Applications_User+
If the database is a repository for Oracle Grid Control, log in to the database as the SYSMAN user and remove the additional objects from the database by running the following script:
+$ORACLE_HOME/ccr/admin/scripts/dropemrep_collect.sql+
To stop the Scheduler and remove the service or the crontab entry, enter the following command:
+$ORACLE_HOME/ccr/bin/deployPackages -d $ORACLE_HOME/ccr/inventory/core.jar+
Delete the ccr directory by entering the following command:
+$ rm -rf $ORACLE_HOME/ccr+
Oracle Configuration Manager is successfully uninstalled.
However, $ORACLE_HOME/ccr/admin/scripts/dropocm.sql does not exist on our system.

Privacy concerns with Oracle Configuration Manager

Hi,
Could anyone tell me whether any Privacy concerns are there with Oracle Configuration Manager? OCM is Bane or Blessing?
is it really safe to install(From Customer point of view) ? will it upload any data to MOS which will put the Customer in trouble with Oracle Corporation?
please advice
Regards,
Sanju

Hi hsawwan ,
please go through the following links..
http://www.dba-oracle.com/t_oracle_configuration_manager_concerns.htm
http://www.pythian.com/news/644/oracle-configuration-manager-bane-or-blessing/
please advice
Regards,
Sanju

Error in Agent Installation - oracle Configuration Manager

Similar Messages

Maybe you are looking for