Error in aggregate table for InfoCube

Hi All,
Activation of aggregates failed for one P1 load in rpoduction system, i just repeated the process, but it got failed with below message
Error in aggregate table for InfoCube zglk_c01.
Can any one pls let me what step shud i take to run it .
Shall i do manuall activation for this aggregates.
Awaiting fro ur replies.
Thanks & Regards
Sneha
Edited by: sneha latha on Jan 4, 2008 6:46 AM
Edited by: sneha latha on Jan 4, 2008 6:46 AM

Hi Sneha,
I will Suggest u to do some RSRV tests.
Go to transaction RSRV. There you will find test for aggregates. Just Perform them and see whether you get any discrepencies.
Regds,
Shashank
Edited by: Shashank Dighe on Jan 4, 2008 10:51 AM

Similar Messages

Error when running report: "Error in aggregate table for InfoCube"

Hi Experts
We had a temporary error, which I would like to find the root cause for.
We where running a Workbook which is based on a multiprovider. For a short period of time (around 10 minuts) we got the following error when we executed the workbook based on this multiprovider:
"Error in aggregate table for InfoCube"
There where no loads or aggregates rolling up on the cubes in the multiprovider.
I see no short dumps as well in ST22.
Have anybody seen this error before, and how can I trace how this error occured?
Thanks in advance.
Kind regards,
Torben

Hi Sneha,
I will Suggest u to do some RSRV tests.
Go to transaction RSRV. There you will find test for aggregates. Just Perform them and see whether you get any discrepencies.
Regds,
Shashank
Edited by: Shashank Dighe on Jan 4, 2008 10:51 AM

Error when structuring the index of aggregate 100165 for InfoCube 0TCT_C01

Hi,
I was getting following error:
**Error when structuring the index of aggregate 100165 for InfoCube 0TCT_C01
I used this link Please Help me...
I followed all the steps:
1.Delete indexes.
2.Load the InfoCube.
3.Create Indexes.
4.Roll-up of aggregates
but still getting the same error(Roll-up of aggregate is failing).
After the failure if i repeat the step then it gets executed successfully.
I need to monitor the PC ...and at the end of the complition it fails(daily)...
Please can anyone help me on this issue(that why the chain is failing at the roll-up)?

Go to TX RSDDV with your cube an identify the technical ID of ur aggregate (a number 100045 for instance).
TX SE11 goto table RSDDAGGRDIR filter the selection with AGGRCUBE = 100045.
Copy the AGGRUID (something like 3QL29Z7ZLO3BQZDSSLRU0MGOI)
Then come to TX SE37; RSDDK_AGGREGATES_FILL; hit the single test button
I_T_Aggregate enter your AGGRUID
I_T_INFOCUBE enter the techid of your cube
Execute.
This will fill your aggregate.
Hope this will help......
Regards,
Mahesh

Error in Setup Tables for QM Inspection Lots

Hi,
I have an issue when I attempt to fill the setup tables for QM that I receive the following error for the Inspection Lots (QV) only. When I fill the setup tables for Notifications and Inspection Results, then these are OK and use the same standard function module 'qmex_inspection_lot_import_ini'.
"Internal error in program SAPLQMEX, function module / subroutine qmex_inspection_lot_import_ini, code 1".
Has anyone any ideas of the cause or have you experienced this before?
Thanks,
Scott

Hi,
The most likely reason that leads to the above error message in your
system is an inconsistency of the inspection lots.
To get the inconsistent inspection lot,please check your system in the
following way:
- transaction OLIQBW for running Setup table
- switch on debugging mode
- set break point in the function QMEX_INSPECTION_LOT_IMPORT_INI
on the line:
ELSE.
   MESSAGE e011(qmex) WITH sy-repid
                           'qmex_inspection_lot_import_ini'
                           '1'.
> then excecute F8 to go to this break point.
- double klick on ' l_qals-prueflos'
on line 77 in the same function QMEX_INSPECTION_LOT_IMPORT_INI:
READ TABLE qave_tab INTO l_qave
                    WITH KEY prueflos = l_qals-prueflos <      here !
                    BINARY SEARCH.
Please check following note:
305244 Missing operations for the inspection lot
89541 Inspection lot exists w/o status object: EM BS001
536769 Inspection lots without status object
Thanks,
Venkat

Error when activating DTP for InfoCube

Hi
I encountered an error '**** Error from PSA ****' 'Error when activating Data Transfer Process DTP_436DF8XYKE2Y97CUX9W7FM0JH' while trying to activate the DTP for an infocube. Does anyone know why this happens and how to fix it ?
I'm on support pack 9 at this moment.
Many thanks,
Anthony

Hi Gnana
Thanks for your reply. Yes, I had already created the transformation for the bespoke cube, checked, saved and activated it without any error. Next, I created the DTP for this cube. Checked it and there wasn't any error. However when I activated it, I received that error message. I didn't get this error when I activated DTP for DSO and master data infoobject.
I have deleted and created the DTP like 5-6 times and still faced the same error message.
Prior to applying support pack 9, I didn't get this error message. Now that I did and also applied the collective OSS note 978148 (BI in SAP NetWeaver 2004s: OSS notes after SPS9), I received this error message.
Regards,
Anthony

Error in database parameter for star schema table in RSRV

Hi Experts,
In RSRV, I executed the following checks in my cube and it is showing me the following error:-
1) Check database parameter for star schema table for InfoCube ZMM_MVAL
564971 units missing from fact table /BIC/FZMM_MVAL; see details
Message no. RSRV134
Diagnosis
In the fact table /BIC/FZMM_MVAL records have been found that contain values other than zero for key figures that have units, but that have no value for the unit of the key figure. Since the value of the unit has to correspond to the value of the key figure, this inidicates an error when the data was loaded. The values of the units have not been loaded into BW correctly. Choose Details to display the incorrect records.
2) Consistency of time dimension of InfoCube ZMM_MVAL
/BIC/FZMM_MVAL PARTITIONED 1878 ( 30 - 50 )
Please advise me on this.
Thanks in Advance.
Aparna

As mentioned in the log, check the Unit KFs in your cube and make sure that unit is populated for all such values.
e.g. if Qty is 5 KG, then unit KF will have 5 and unit info object should have KF.
Regards,
Gaurav

Error in flex item, combinations table for this flexfield has more 1 entry

HI OAF Gurus,
I setup a flex item with the following attributes:
ID = CostAllocationKFF
Item Style = flex
View Instance = XXPerAsgDetailsVO
Rendered = true
Appl Short Name = PAY
Name = COST
Type = key
Segment List = XXPAY_COST_ALLOCATION|Company|Cost Centre
In my controller, I have the following code in processRequest to bind the KFF against the CostAllocationKFF item:
String costFlexStrucCode = "XXPAY_COST_ALLOCATION";
boolean flag1 = false;
OAKeyFlexBean oacostallockeyflexbean = (OAKeyFlexBean)webBean.findIndexedChildRecursive("CostAllocationKFF");
if(oacostallockeyflexbean != null)
oacostallockeyflexbean.useCodeCombinationLOV(flag1);
oacostallockeyflexbean.setCCIDAttributeName("CostAllocKeyflexId");
oacostallockeyflexbean.setStructureCode(costFlexStrucCode);
Now, at processRequest it is picking up the right segment values. However, when I dont update the segments and I hit a button that will eventualy call processFormRequest, it is giving me the following error,
"The combinations table for this flexfield contains more than one entry that matches the entered values. Inform your system administrator that the combination identified by the number 6419 is duplicated."
Is there anything that I'm missing? What should I do to refrain from such error happening? I also have a flex item for people group but it is not giving me the same error message. Please advise. Thank you very much.

can someone help shed light on this? I'm still trying to find out what's causing this issue. Thanks!

Unknown type TABLE for element Error

This question i am posting on behalf of one of my friend
In RF transaction, created a screen that contains table control. The table control has created using wizard
If we run the transaction with in SAPGui its working fine. After creating Internet service, and publish and run thru internet explorer its giving the following said Error
" Unknow type TABLE for element IT_PRODUCT"
I checked the controls statement for table view , its there in the code Here IT_PRODUCT is tableview for tablecontrol
Any Info ?
a®

Solved.
The problem is because , the table control had been created thru "Table Control Wizard" , solved by creating the table control using SE51 has resolved the issue.
Strange ?
May be because wizard unncessary creating lot of HTML code while publishing
a®

Error in Aggregate activation

Hi Experts
I am trying to create Aggregates on a Info Cube.
Go to t.code: RSDDV
select the IFC
In the Aggregation screen, select the characteristic that will be based on your aggregate (drag and drop)
When i try to Activate the Aggregates it showing me error
No aggregates selected for activation
Please help

.      You are in the Modeling function area of the Administrator Workbench.In the navigation window, choose InfoProvider.
       2.      In the InfoProvider tree, navigate to the InfoCube whose queries you want to optimize.
       3.      In the context menu for the InfoCube, choose Maintain Aggregate.This will bring you to the Maintain Aggregates screen.
If an aggregate was already created for the selected InfoCube, you can also go to the maintenance screen by double-clicking on .
If you create the first aggregate for an InfoCube, you will first go to the Proposals for Aggregates dialog box. You can define whether the system should propose aggregates or whether you want to create them manually.
       4.      The left side of the screen shows the dimensions, characteristics and navigation attributes of the selected InfoCube in a tree structure as Selection Options for Aggregates.
Select one or more objects to be copied to the aggregate.
Define the granularity you need for the data in the aggregate. Add all the characteristics derived from these characteristics.
For example if you define an aggregate for the month, you should also include the quarter and year in the aggregate.
This enhancement does not increase the data set, but permits
·         a year aggregate to be built from this aggregate,
·         those who need the annual values can also use queries of this aggregate.
You can only include a characteristic and one of its attributes in an aggregate in expert mode (Extras ® Switch expert mode on/off). Such an aggregate has the same granularity and size as an aggregate that was only built with the characteristic, but is affected by the hierarchy/attribute change run. Compared with the aggregate for the characteristic in which the attribute information is defined by a join with the master data table, the aggregate for the characteristic and the attribute only saves the database join.
We therefore recommend that you either build an aggregate using with the characteristic or you build a much smaller aggregate using the attribute.
       5.      You have different options for creating an aggregate:
·         Transfer the selected object(s) to the Aggregates column on the right side of the screen using Drag&Drop.
·         Select Create New Aggregate.
The Enter Description for Aggregate dialog box appears.
       6.      Enter:
Short Description
Long Description
To change the text at a later time, select Change Description Text from the context menu of the aggregate.
       7.      Choose Continue. You get to the Maintain Aggregates screen.
The system displays the aggregate at the upper right of the screen. The log is displayed in the lower part of the screen.
For more information see Displaying an Aggregate and its Components.
       8.      If an aggregate contains a time-dependent component, you must assign a key date to the aggregate.
When you fill the aggregate, the key date behaves like the key date of a query: The time-dependent attributes and hierarchies are evaluated on this key date. For this reason aggregates with a time-dependent component can only be used in a query if the key date of the query is the same as the key date of the aggregate.
In the Select Variable or Fixed Date dialog box select the following as key date:
·         a variable that is also used in queries for the key date and can be automatically calculated in the SAP Exit or Customer Exit processing types (see Using Variables),
0CWD Current workday
0DAT Current calendar day
0P_KEYDT Key date of due date
0P_KEYD2 Key date of posting (from key date of due date)
0P_KEYD3 Key date of clearing (from key date of due date)
0P_KEYD4 Key date of posting (posting date)
0P_KEYD5 Key date of clearing (from key date of posting)
Aggregates with a variable key date must be updated regularly. This process must be included in a Process Chain (Further BW processes -> Adjust Time-Dependent Aggregates).
·         A certain calendar day
To enter a calendar day, select object CALENDAR in the Select Variable or Fixed Date dialog box (). Choose Transfer selection. This takes you to the Calendar dialog box. You can copy this date to the aggregate definition by double-clicking.
The system displays the technical name of the variable you chose or of the fixed calendar date in the aggregate tree under Properties for node Variables for Key Date.
Once the aggregate has been activated and filled, the system copies the key date computed from the variable when the aggregate should be filled into the line Key Date.
       9.      You can change the structure of the aggregate by adding further components or deleting existing ones. You can also change the key date.
Inserting components into the aggregate
i.         Select one or more objects in Selection Options for Aggregates.
ii.       Transfer them to the aggregate to be changed at the right of the screen with Drag&Drop.
iii.      As needed, change the Aggregation Level with the associated entry in the context menu:
All Characteristic Values
Hierarchy Level
Fixed Value
Aggregates containing fewer than 14 components are stored on the database in optimized form (see Efficiently Loading Data into Aggregates).
Note that the characteristics that are defined in the InfoCube are also included in the aggregate and thus increase the number of components even though they are not visible on the surface.
Deleting components from the aggregate
i.         In the aggregate tree navigate to the characteristic(s) or navigation attributes you want to delete.
ii.       Select these components.
iii.      To delete the components from the aggregate you can:
-         Choose Remove Components in the context menu.
-         Copy the components to the left part of the screen with Drag&Drop.
To delete a dimension from an aggregate, you have to delete all the characteristics and navigation attributes of this dimension.
Changing the key date
i.         In the aggregate tree under Properties, select node Variable for Key Date and choose Change from the context menu. You get to dialog box Select Variable or Fixed Date.
ii.       Select and transfer the required variable or calendar date.
The key date computed from a changed variable is only copied to line Key Date when the Adjust Time-Dependent Aggregates process has been executed.
   10.      To check the aggregate definition for inconsistencies choose Check Definition.
   11.      Save the new or changed aggregate.
Edited by: Rama on Sep 24, 2008 12:03 PM

Key figure units in fact tables of InfoCube are blank

I run RSRV - Key figure units in fact tables for my cube and found the following error message. I found one SAP note 941895 - RSRV test fails with unknown error, but our system status is SAPKW70020, so this note is not useful to our case. Pls advise!
System message:
The test Unit of key figures in fact tables for InfoCube XXX initial had to be terminated due to an unknown error (RSRV320).
Many thanks!
rajatina.

Hi Raja,
Check that in your transformation you have mapped Unit from source system to this key figure. If not then you will have to do the mapping and reload the data. If you are not able to get unit from source system then atleast you will have to assign some constant Unit if possible.
Regards,
Durgesh.

RPD Modelling - Aggregate tables

Hello,
I have two facts which are Actuals and Budgets.
F_Actuals - Month level Data, Date Fk being Date_WID(So it has data only for the first of the month)
F_Budget - Day level Data, FK being Date_WID
Dim_Date - Day, PK being Date_WID
I have created aggregate tables for the facts at Month level, and at other dimension levels. Now when I snowflake these tables in BMM as other sources for the fact, I have set the content filter for Date Dim at detail level(for AGG tables), though the data is actually at month level, its exists for a single day in the whole month.
I have been facing performance issues when Budget columns are pulled into the report, as it doesnt have any AGG table WRT other dimensions.
So the Budget columns were included into the Actual AGG tables. Everything is fine till this point. But I have two coulmns in my presentation layer for Budget, one from AGG and one from detail Budget Fact. So as to give the user only one column, I have snowflaked the Actual AGG fact with the F_Budget and set the content levels appropriatly.
Issue: The data doesnt match. As long as the column from F_Actuals are pulled the data is accurate, but once columns from F_Budget are pulled the data is wrong.
Do you anything wrong with the modelling? or what actually went wrong here?
Thanks.

I dont see any issues with the snowflaking, though you snowflaked Actual AGG tables to F_Budget. If your data doesnt match, i would check the content levels. As you said the combination of columns from both facts is where the issue is, so probably check all the dimensions and its levels set in your facts, probably F_Budget in particular.

Error : No matching Table

Hi All,
I am migrating form Analytics 7.7 to OBIEE, after migrating catalog and RPD, i am facing error in some of the reports.
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 46043] Internal error: No matching table for expr NRT.SH_TYPE, File .\Src\SQOSPSimplifyJoin.cpp, line 118. (HY000)
i am using the SH_TYPE as filter in the request.
Thanks
Rupesh

Hi Rupesh,
By strange coincidence I just got this error myself, only I have an Essbase data source. A quick Google search return a few results suggesting this is a C++ code error in the Admin tool. As I thought this is a corruption of some sort, to resolve it I had to effectively re-create all the joins in my schema and it all works OK now.
It appears that this might be related to importing certain parts of the repository by copying and pasting from another rpd, not sure if you have been doing that. I try not to but had to do it recently and I guess this eror is the consequence.
regards
Ed

Aggregates table name for an infocube ?

May I know the aggregate table name for an infocube ? I want to see the loaded aggregate for an infocube, is there a physical table name created when we have aggregate for an infocube ? or the aggregates are created from the existing fact table of the ic ? Please reply.
thanks
DR

Hi Daniel,
1.Rollup is nothing but the InfoCube data is summarized into aggregates tables. Once initial filling finish, for regular deltas/daily loads we will do rollup.
When you create aggregates, Dimension,F, E,V table will create. You can find these tables in se11 by giving <*aggregate technical name*> and press F4.Finally aggregated data will store at (/BIC/E< aggregate technical name>).
2. Am not getting your second question “Will thesetables/views exist in the DB or just on the application layer ?”
Thanks,
Mahesh

Errors when Creating Aggregate Tables in OBIEE 11.1.1.6 within SQL server

Hi All,
I was trying to create an aggregate table in OBIEE 11.1.1.6 within SQL Server. The sql was generated successfully as below. But an error occurred when I use NQCMD to execute the sql and the following error showed:
1. SQL for creating Aggregate Table:
create aggregates
"ag_Measure"
for "ASOBI_DTT_Demo"."Measure"("ValidVIPCnt")
at levels ("ASOBI_DTT_Demo"."日期"."月", "ASOBI_DTT_Demo"."門市品牌"."門市品牌", "ASOBI_DTT_Demo"."門市類別"."門市類別", "ASOBI_DTT_Demo"."內創門市"."內創門市", "ASOBI_DTT_Demo"."門市/倉庫"."門市/倉庫", "ASOBI_DTT_Demo"."門市群組"."門市群組", "ASOBI_DTT_Demo"."門市行政區課"."行政區", "ASOBI_DTT_Demo"."門市地區"."城市")
using connection pool "ASOBI_DTT_Demo"."ASOBI_System10"
in "ASOBI_DTT_Demo"."ASOBI"."dbo";
2. Error Message:
"ag_Measure"
for "ASOBI_DTT_Demo"."Measure"("ValidVIPCnt")
at levels ("ASOBI_DTT_Demo"."日期"."月", "ASOBI_DTT_Demo"."門市品牌"."門市品牌"
, "ASOBI_DTT_Demo"."門市類別"."門市類別", "ASOBI_DTT_Demo"."內創門市"."內創門市"
, "ASOBI_DTT_Demo"."門市/倉庫"."門市/倉庫", "ASOBI_DTT_Demo"."門市群組"."門市群
組", "ASOBI_DTT_Demo"."門市行政區課"."行政區", "ASOBI_DTT_Demo"."門市地區"."城市
using connection pool "ASOBI_DTT_Demo"."ASOBI_System10"
in "ASOBI_DTT_Demo"."ASOBI"."dbo"
[343][State: 37000] [Microsoft][SQL Server Native Client 10.0][SQL Server]CREATE
、DROP or ALTER 陳述式中使用未知的物件類型 'aggregates'。
Statement execute failed
Which means "Using unknown object type 'aggregates' in CREATE. DROP or ALTER statements" in English.
Can anyone give me a suggestion for this error?? Many thanks!!!

Hi Martin,
I guess, I was not clear enough. Let me try again
How Aggregate Persistence works in OBIEE?
Once you are done choosing options in the Aggregate Persistence wizard, it generates an intelligent Query.
What query is it?
If you happen to understand the query, it is not like any ANSI standard SQL (I would say DDL) query. As you might have noticed there are no SQL Server datatypes, lengths, keys, constraints etc. This query can only be understood by the BI Server.
How do I issue this query?
Since the logical query could only be understood by BI Server, it has to be issued only to BI Server Engine using some tool viz NQCMD in this case.
What does issuing this query using NQCMD do?
The execution steps are as follows, the moment the query is issue via NQCMD
Aggregate Persistent Wiz Generate Query ----- Issued to ---> NQCMD ----- Passes the logical query to ---> BI Server ----- Parses the query ---> Builds the corresponding physical DDL statements Issued --->To the Database --- If successful ---> .RPD is automatically updated with the aggregated sources etc.
How do I pass the query to BI Server using NQCMD?
The format of issuing this logical query to BI Server using NQCMD is
nqcmd -d <Data Source Name> -u <Analytics UserId> -p <Password> -s <command> > output.log
where
<Data Source Name> : Is the DSN name which OBIPS uses to talk to Oracle BI Server. Yes, it's the very same DSN that can be found in InstanceConfig.xml
<Analytics UserID> : Any user in obiee with admin privileges.
<Password> : Password of the obiee UserId
<Command> : Logical SQL Command which you already have handy.
Hope I was good this time..
Dhar

Error when creating aggregate table

Hello,
I am creating an aggregate table using the Aggregate Persistence Wizard. When trying to run the batch file, I am receiving an error: "Could not connect to the Oracle BI Server instance".
But then, the Oracle BI Server is running and I am able to do queries in answers with no connection issues. (Pls see below)
Please help.
Thanks,
Felicity
D:\OracleBI\server\Repository>create_agg.bat
D:\OracleBI\server\Repository>nqcmd -d AnalyticsWeb -u Administrator -p Administ
rator -s D:\OracleBI\server\Repository\CREATE_AGG.sql
Oracle BI Server
Copyright (c) 1997-2009 Oracle Corporation, All rights reserved
create aggregates
"ag_SalesFacts"
for "SupplierSales"."SalesFacts"("Net Weight Shipped","Units Ordered","Units Sh
ipped","Dollars")
at levels ("SupplierSales"."ProductsDim"."Type", "SupplierSales"."CustomersDim"
."SalesRep", "SupplierSales"."PeriodsDim"."Month")
using connection pool "ORCL"."SUPPLIER CP"
in "ORCL".."SUPPLIER2"
create aggregates
"ag_SalesFacts"
for "SupplierSales"."SalesFacts"("Net Weight Shipped","Units Ordered","Units Sh
ipped","Dollars")
at levels ("SupplierSales"."ProductsDim"."Type", "SupplierSales"."CustomersDim"
."SalesRep", "SupplierSales"."PeriodsDim"."Month")
using connection pool "ORCL"."SUPPLIER CP"
in "ORCL".."SUPPLIER2"
[10058][State: S1000] [NQODBC] [SQL_STATE: S1000] [nQSError: 10058] A general er
ror has occurred.
[nQSError: 37001] Could not connect to the Oracle BI Server instance.
Statement preparation failed
Processed: 1 queries
Encountered 1 errors

Will this help you solve issue http://forums.oracle.com/forums/thread.jspa?messageID=3661598
Check the comments in this blog http://obiee101.blogspot.com/2008/11/obiee-aggregate-persistence-wizard.html
It deals with use permissions for the database.
hope answers your question..
Cheers,
kk

Error in aggregate table for InfoCube

Similar Messages

Maybe you are looking for