Error in AGR_XPRA_REGENERATE_SAP_NEW during XPRA Phase

I'm upgrading from BI 3.1 to NW2004s SR2 and currently in XPRA phase when I hit an error
2 EPU115XReport "AGR_XPRA_REGENERATE_SAP_NEW" started: "20071030054220"
1AETR012XProgram terminated (job: "RDDEXECL", no.: "05422001")
1AEPU320 See job log"RDDEXECL""05422001""<SID>"
1 ETP162 EXECUTION OF REPORTS AFTER PUT
1 ETP110 end date and time : "20071030054235"
1 ETP111 exit code : "12"
I tried executing the AGR_XPRA_REGENERATE_SAP_NEW report in SE38 and prompts me this:
"You are using the Profile Generator for the first time"
When I went to PFCG, it looks ok.
SAPup - Release Build 24.098, TP - Release 700 with Patch 120 and R3trans - Release 700 Version 6.14 program

<b>XPRASUPG.ELG - Log File
</b>**************************************************
LIST OF ERRORS AND RETURN CODES *******
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
XPRA ERRORS and RETURN CODE in SAPR700XD1.WT3
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1AETR012XProgram terminated (job: "RDDEXECL", no.: "08095701")
Long text:
    Cause
      Program "&V#&", which was started in the background, was terminated
      abnormally.
    System Response
      The system created a job log for the terminated program.
    What to do
      Proceed as follows:
      Log onto the system in which the program was executed. The system is
      specified at the beginning of the transport log.
      Then call transaction SM37 to display the job log.
      Enter "&V#&" as job name and "DDIC" as user name.
      Restrict the starting date to the starting date specified in the
      transport log.
      For the other selection criteria, select only jobs with the status
      "cancelled". Then press <LS>Execute</>.
      A list of the jobs satisfying the selection criteria is displayed.
      You can display the log by pressing <LS>Job log</>.
      If the list contains several jobs, you can select the job with the ID "
      &V#&" with <LS>Display</> -> <LS>Job details</> or define further
      details for the selection criteria in the initial screen of transaction
      SM37.
      If the ABAP processor reports cancellation, double-clicking on the
      corresponding message in the job log branches to the display of the
      corresponding short dump.
1AEPU320 See job log"RDDEXECL""08095701""WT3"
1 ETP111 exit code           : "12"
>>> PLEASE READ THE REPORT DOCUMENTATION OF THE REPORTS MENTIONED ABOVE <<<
XPRAs are application reports that run at the end of an upgrade.
Most XPRA reports have a report documentation that explains what
the report does and how errors can be corrected.
Call transaction se38 in the SAP system, enter the report name,
select 'Documentation' and click the 'Display' button.
>>> The problematic XPRAs are mentioned in messages of type PU132 above <b><<<
SAPR700XD1.WT3</b>
4 EPU201XBEGIN OF SECTION BEING ANALYZED
1 ETP199X######################################
1 ETP162 EXECUTION OF REPORTS AFTER PUT
1 ETP101 transport order     : "SAPK700XD1"
1 ETP102 system              : "WT3"
1 ETP108 tp path             : "J:\usr\sap\WT3\SYS\exe\run\tp.exe"
1 ETP109 version and release : "372.04.04" "700"
1 ETP198
2 EPU126XPost-import methods for change/transport request: "SAPK700XD1"
4 EPU111    on the application server: "CPAFISWN"
2 EPU131 No objects requiring post-import methods exist
2 EPU127 Post-import methods of change/transport request "SAPK700XD1" completed
2 EPU128      Start of subsequent processing ... "20071030054220"
2 EPU129      End of subsequent processing... "20071030054220"
3 ETP000
3 ETP000 **************************************************
3 ETP000
2 EPU115XReport "AGR_XPRA_REGENERATE_SAP_NEW" started: "20071030054220"
1AETR012XProgram terminated (job: "RDDEXECL", no.: "05422001")
1AEPU320 See job log"RDDEXECL""05422001""WT3"
1 ETP162 EXECUTION OF REPORTS AFTER PUT
1 ETP110 end date and time   : "20071030054235"
1 ETP111 exit code           : "12"
1 ETP199 ######################################
1 ETP199X######################################
1 ETP162 EXECUTION OF REPORTS AFTER PUT
1 ETP101 transport order     : "SAPK700XD1"
1 ETP102 system              : "WT3"
1 ETP108 tp path             : "J:\usr\sap\WT3\SYS\exe\run\tp.exe"
1 ETP109 version and release : "372.04.04" "700"
1 ETP198
2 EPU126XPost-import methods for change/transport request: "SAPK700XD1"
4 EPU111    on the application server: "CPAFISWN"
2 EPU131 No objects requiring post-import methods exist
2 EPU127 Post-import methods of change/transport request "SAPK700XD1" completed
2 EPU128      Start of subsequent processing ... "20071030054455"
2 EPU129      End of subsequent processing... "20071030054455"
3 ETP000
3 ETP000 **************************************************
3 ETP000
2 EPU115XReport "AGR_XPRA_REGENERATE_SAP_NEW" started: "20071030054455"
1AETR012XProgram terminated (job: "RDDEXECL", no.: "05445401")
1AEPU320 See job log"RDDEXECL""05445401""WT3"
1 ETP162 EXECUTION OF REPORTS AFTER PUT
1 ETP110 end date and time   : "20071030054509"
1 ETP111 exit code           : "12"
1 ETP199 ######################################
1 ETP199X######################################
1 ETP162 EXECUTION OF REPORTS AFTER PUT
1 ETP101 transport order     : "SAPK700XD1"
1 ETP102 system              : "WT3"
1 ETP108 tp path             : "J:\usr\sap\WT3\SYS\exe\run\tp.exe"
1 ETP109 version and release : "372.04.04" "700"
1 ETP198
2 EPU126XPost-import methods for change/transport request: "SAPK700XD1"
4 EPU111    on the application server: "CPAFISWN"
2 EPU131 No objects requiring post-import methods exist
2 EPU127 Post-import methods of change/transport request "SAPK700XD1" completed
2 EPU128      Start of subsequent processing ... "20071030061226"
2 EPU129      End of subsequent processing... "20071030061226"
3 ETP000
3 ETP000 **************************************************
3 ETP000
2 EPU115XReport "AGR_XPRA_REGENERATE_SAP_NEW" started: "20071030061226"
1AETR012XProgram terminated (job: "RDDEXECL", no.: "06122501")
1AEPU320 See job log"RDDEXECL""06122501""WT3"
1 ETP162 EXECUTION OF REPORTS AFTER PUT
1 ETP110 end date and time   : "20071030061240"
1 ETP111 exit code           : "12"
1 ETP199 ######################################
1 ETP199X######################################
1 ETP162 EXECUTION OF REPORTS AFTER PUT
1 ETP101 transport order     : "SAPK700XD1"
1 ETP102 system              : "WT3"
1 ETP108 tp path             : "J:\usr\sap\WT3\SYS\exe\run\tp.exe"
1 ETP109 version and release : "372.04.04" "700"
1 ETP198
2 EPU126XPost-import methods for change/transport request: "SAPK700XD1"
4 EPU111    on the application server: "CPAFISWN"
2 EPU131 No objects requiring post-import methods exist
2 EPU127 Post-import methods of change/transport request "SAPK700XD1" completed
2 EPU128      Start of subsequent processing ... "20071030062509"
2 EPU129      End of subsequent processing... "20071030062509"
3 ETP000
3 ETP000 **************************************************
3 ETP000
2 EPU115XReport "AGR_XPRA_REGENERATE_SAP_NEW" started: "20071030062509"
1AETR012XProgram terminated (job: "RDDEXECL", no.: "06250901")
1AEPU320 See job log"RDDEXECL""06250901""WT3"
1 ETP162 EXECUTION OF REPORTS AFTER PUT
1 ETP110 end date and time   : "20071030062524"
1 ETP111 exit code           : "12"
1 ETP199 ######################################
1 ETP199X######################################
1 ETP162 EXECUTION OF REPORTS AFTER PUT
1 ETP101 transport order     : "SAPK700XD1"
1 ETP102 system              : "WT3"
1 ETP108 tp path             : "J:\usr\sap\WT3\SYS\exe\run\tp.exe"
1 ETP109 version and release : "372.04.04" "700"
1 ETP198
2 EPU126XPost-import methods for change/transport request: "SAPK700XD1"
4 EPU111    on the application server: "CPAFISWN"
2 EPU131 No objects requiring post-import methods exist
2 EPU127 Post-import methods of change/transport request "SAPK700XD1" completed
2 EPU128      Start of subsequent processing ... "20071030064533"
2 EPU129      End of subsequent processing... "20071030064533"
3 ETP000
3 ETP000 **************************************************
3 ETP000
2 EPU115XReport "AGR_XPRA_REGENERATE_SAP_NEW" started: "20071030064533"
1AETR012XProgram terminated (job: "RDDEXECL", no.: "06453201")
1AEPU320 See job log"RDDEXECL""06453201""WT3"
1 ETP162 EXECUTION OF REPORTS AFTER PUT
1 ETP110 end date and time   : "20071030064547"
1 ETP111 exit code           : "12"
1 ETP199 ######################################
1 ETP199X######################################
1 ETP162 EXECUTION OF REPORTS AFTER PUT
1 ETP101 transport order     : "SAPK700XD1"
1 ETP102 system              : "WT3"
1 ETP108 tp path             : "J:\usr\sap\WT3\SYS\exe\run\tp.exe"
1 ETP109 version and release : "372.04.04" "700"
1 ETP198
2 EPU126XPost-import methods for change/transport request: "SAPK700XD1"
4 EPU111    on the application server: "CPAFISWN"
2 EPU131 No objects requiring post-import methods exist
2 EPU127 Post-import methods of change/transport request "SAPK700XD1" completed
2 EPU128      Start of subsequent processing ... "20071030065634"
2 EPU129      End of subsequent processing... "20071030065634"
3 ETP000
3 ETP000 **************************************************
3 ETP000
2 EPU115XReport "AGR_XPRA_REGENERATE_SAP_NEW" started: "20071030065634"
1AETR012XProgram terminated (job: "RDDEXECL", no.: "06563301")
1AEPU320 See job log"RDDEXECL""06563301""WT3"
1 ETP162 EXECUTION OF REPORTS AFTER PUT
1 ETP110 end date and time   : "20071030065648"
1 ETP111 exit code           : "12"
1 ETP199 ######################################
1 ETP199X######################################
1 ETP162 EXECUTION OF REPORTS AFTER PUT
1 ETP101 transport order     : "SAPK700XD1"
1 ETP102 system              : "WT3"
1 ETP108 tp path             : "J:\usr\sap\WT3\SYS\exe\run\tp.exe"
1 ETP109 version and release : "372.04.04" "700"
1 ETP198
2 EPU126XPost-import methods for change/transport request: "SAPK700XD1"
4 EPU111    on the application server: "CPAFISWN"
2 EPU131 No objects requiring post-import methods exist
2 EPU127 Post-import methods of change/transport request "SAPK700XD1" completed
2 EPU128      Start of subsequent processing ... "20071030072728"
2 EPU129      End of subsequent processing... "20071030072728"
3 ETP000
3 ETP000 **************************************************
3 ETP000
2 EPU115XReport "AGR_XPRA_REGENERATE_SAP_NEW" started: "20071030072728"
1AETR012XProgram terminated (job: "RDDEXECL", no.: "07272701")
1AEPU320 See job log"RDDEXECL""07272701""WT3"
1 ETP162 EXECUTION OF REPORTS AFTER PUT
1 ETP110 end date and time   : "20071030072742"
1 ETP111 exit code           : "12"
1 ETP199 ######################################
1 ETP199X######################################
1 ETP162 EXECUTION OF REPORTS AFTER PUT
1 ETP101 transport order     : "SAPK700XD1"
1 ETP102 system              : "WT3"
1 ETP108 tp path             : "J:\usr\sap\WT3\SYS\exe\run\tp.exe"
1 ETP109 version and release : "372.04.04" "700"
1 ETP198
2 EPU126XPost-import methods for change/transport request: "SAPK700XD1"
4 EPU111    on the application server: "CPAFISWN"
2 EPU131 No objects requiring post-import methods exist
2 EPU127 Post-import methods of change/transport request "SAPK700XD1" completed
2 EPU128      Start of subsequent processing ... "20071030073925"
2 EPU129      End of subsequent processing... "20071030073925"
3 ETP000
3 ETP000 **************************************************
3 ETP000
2 EPU115XReport "AGR_XPRA_REGENERATE_SAP_NEW" started: "20071030073925"
1AETR012XProgram terminated (job: "RDDEXECL", no.: "07392501")
1AEPU320 See job log"RDDEXECL""07392501""WT3"
1 ETP162 EXECUTION OF REPORTS AFTER PUT
1 ETP110 end date and time   : "20071030073939"
1 ETP111 exit code           : "12"
1 ETP199 ######################################
1 ETP199X######################################
1 ETP162 EXECUTION OF REPORTS AFTER PUT
1 ETP101 transport order     : "SAPK700XD1"
1 ETP102 system              : "WT3"
1 ETP108 tp path             : "J:\usr\sap\WT3\SYS\exe\run\tp.exe"
1 ETP109 version and release : "372.04.04" "700"
1 ETP198
2 EPU126XPost-import methods for change/transport request: "SAPK700XD1"
4 EPU111    on the application server: "CPAFISWN"
2 EPU131 No objects requiring post-import methods exist
2 EPU127 Post-import methods of change/transport request "SAPK700XD1" completed
2 EPU128      Start of subsequent processing ... "20071030080958"
2 EPU129      End of subsequent processing... "20071030080958"
3 ETP000
3 ETP000 **************************************************
3 ETP000
2 EPU115XReport "AGR_XPRA_REGENERATE_SAP_NEW" started: "20071030080958"
1AETR012XProgram terminated (job: "RDDEXECL", no.: "08095701")
1AEPU320 See job log"RDDEXECL""08095701""WT3"
1 ETP162 EXECUTION OF REPORTS AFTER PUT
1 ETP110 end date and time   : "20071030081012"
1 ETP111 exit code           : "12"
1 ETP199 ######################################
4 EPU202XEND OF SECTION BEING ANALYZED

Similar Messages

ASSERTION_FAILED with program RGIMOVV0 during XPRA PHASE ; LEDGER SCENARIOS

Hello guys, i'm having a problem applying support package EHP3 into an ECC system . some short part of the dump text : Runtime Errors ASSERTION_FAILED Date and Time 17.09.2009 15:05:51 -
|Short text | | The ASSERT condition was violated. | -
|How to correct the error | | Probably the only way to eliminate the error is to correct the program. | | - | | | | If the error occures in a non-modified SAP program, you may be able to | | find an interim solution in an SAP Note. | | If you have access to SAP Notes, carry out a search with the following | | keywords: | | | | "ASSERTION_FAILED" " " | | "RGIMOVV0" or "RGIMOVV0" | | "FILL_LEDGER_SCENARIOS" | -
|Information on where terminated | | Termination occurred in the ABAP program "RGIMOVV0" - in | | "FILL_LEDGER_SCENARIOS". | | The main program was "RGZZGLUX ". | | | | In the source code you have the termination point in line 1724 | | of the (Include) program "RGIMOVV0". | | The program "RGIMOVV0" was started as a background job. | | Job Name....... "RDDEXECL" | | Job Initiator.. "DDIC" | | Job Number..... 15054200 | -
|Source Code Extract | -
|Line |SourceCde | -
| 1694| | | 1695|ENDFORM. " create_add_mov_for_gl_ledger | | 1696| | | 1697|&---- | | 1698|& Form fill_ledger_scenarios | | 1699|&--* | | 1700|* text | | 1701|*--
* | | 1702|FORM fill_ledger_scenarios USING iv_fieldmovement TYPE feldmodif | | 1703| iv_interface TYPE gl_interface | | 1704| is_t881 TYPE t881 | | 1705| it_ledger_scen TYPE ty_ledger_scen_tab | | 1706| it_scen_fields TYPE ty_scen_fields_tab | | 1707| it_cust_fields TYPE ty_cust_fields_tab. | | 1708| | | 1709| DATA: ls_ledger_scen TYPE fagl_ledger_scen, | | 1710| ls_scen_field TYPE fagl_scen_fields, | | 1711| ls_field_move TYPE fagl_field_move, | | 1712| ls_field_movec TYPE fagl_field_movec, | | 1713| ls_cust_field TYPE fagl_cust_fields, | | 1714| lv_lfieldname TYPE dfies-lfieldname. | | 1715| | | 1716| LOOP AT it_ledger_scen INTO ls_ledger_scen. | | 1717| LOOP AT it_scen_fields INTO ls_scen_field | | 1718| WHERE scenario = ls_ledger_scen-scenario | | 1719| AND interface = iv_interface. | | 1720| READ TABLE gt_field_move INTO ls_field_move | | 1721| WITH TABLE KEY totable = is_t881-tab | | 1722| tofield = ls_scen_field-field | | 1723| interface = iv_interface. | |>>>>>| ASSERT sy-subrc = 0. | | 1725|* co-pa interface table is generated, so first check if field really exists | | 1726| IF iv_interface = gc_copa_interface. | | 1727| MOVE ls_field_move-fromfield TO lv_lfieldname. | | 1728| CALL FUNCTION 'DDIF_NAMETAB_GET' | | 1729| EXPORTING | | 1730| tabname = ls_field_move-fromtable | | 1731| lfieldname = lv_lfieldname | | 1732| EXCEPTIONS | | 1733| OTHERS = 1. | | 1734| CHECK sy-subrc = 0. | | 1735| ENDIF. | | 1736| PERFORM append_field USING ls_ledger_scen-client iv_fieldmovement ls_scen_field-field | | 1737| ls_field_move-fromtable ls_field_move-fromfield ls_field_move-exitname. | | 1738| ENDLOOP. | | 1739| ENDLOOP. | | 1740| | | 1741| LOOP AT it_cust_fields INTO ls_cust_field. | | 1742| READ TABLE gt_field_movec INTO ls_field_movec | | 1743| WITH TABLE KEY totable = is_t881-tab | -
did someone of you experience a problem of this kind?
Even performing a local copy I experienced the same and running the program RGIMOVV0 from se38 leads to the same dump. Our development is in stuck .
Regards to all

we have deleted three entries from a table cuasing the dump. ALL the entries with to field PROJK .
Do not know but somone maybe started a project in the ledger scenario that put those entries in the table.
If you go in spro at the voice" assign ledger scenario" it should lead you to the same dump.
try !

ASSERTION_FAILED with program RGIMOVV0 during XPRA PHASE

Hello guys,
i'm having a problem applying support package EHP3 into an ECC system .
some short part of the dump text :
Runtime Errors         ASSERTION_FAILED
Date and Time          17.09.2009 15:05:51
Short text
The ASSERT condition was violated.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"ASSERTION_FAILED" " "
"RGIMOVV0" or "RGIMOVV0"
"FILL_LEDGER_SCENARIOS"
Information on where terminated
Termination occurred in the ABAP program "RGIMOVV0" - in
"FILL_LEDGER_SCENARIOS".
The main program was "RGZZGLUX ".
In the source code you have the termination point in line 1724
of the (Include) program "RGIMOVV0".
The program "RGIMOVV0" was started as a background job.
Job Name....... "RDDEXECL"
Job Initiator.. "DDIC"
Job Number..... 15054200
Source Code Extract
Line
SourceCde
1694
1695
ENDFORM.                    " create_add_mov_for_gl_ledger
1696
1697
1698
*&      Form fill_ledger_scenarios
1699
1700
      text
1701
1702
FORM fill_ledger_scenarios USING iv_fieldmovement TYPE feldmodif
1703
iv_interface TYPE gl_interface
1704
is_t881 TYPE t881
1705
it_ledger_scen TYPE ty_ledger_scen_tab
1706
it_scen_fields TYPE ty_scen_fields_tab
1707
it_cust_fields TYPE ty_cust_fields_tab.
1708
1709
DATA: ls_ledger_scen TYPE fagl_ledger_scen,
1710
ls_scen_field TYPE fagl_scen_fields,
1711
ls_field_move TYPE fagl_field_move,
1712
ls_field_movec TYPE fagl_field_movec,
1713
ls_cust_field TYPE fagl_cust_fields,
1714
lv_lfieldname TYPE dfies-lfieldname.
1715
1716
LOOP AT it_ledger_scen INTO ls_ledger_scen.
1717
LOOP AT it_scen_fields INTO ls_scen_field
1718
WHERE scenario = ls_ledger_scen-scenario
1719
AND interface = iv_interface.
1720
READ TABLE gt_field_move INTO ls_field_move
1721
WITH TABLE KEY totable = is_t881-tab
1722
tofield = ls_scen_field-field
1723
interface = iv_interface.
>>>>>
ASSERT sy-subrc = 0.
1725
    co-pa interface table is generated, so first check if field really exists
1726
IF iv_interface = gc_copa_interface.
1727
MOVE ls_field_move-fromfield TO lv_lfieldname.
1728
CALL FUNCTION 'DDIF_NAMETAB_GET'
1729
EXPORTING
1730
tabname    = ls_field_move-fromtable
1731
lfieldname = lv_lfieldname
1732
EXCEPTIONS
1733
OTHERS     = 1.
1734
CHECK sy-subrc = 0.
1735
ENDIF.
1736
PERFORM append_field USING ls_ledger_scen-client iv_fieldmovement ls_scen_field-field
1737
ls_field_move-fromtable ls_field_move-fromfield ls_field_move-exitname.
1738
ENDLOOP.
1739
ENDLOOP.
1740
1741
LOOP AT it_cust_fields INTO ls_cust_field.
1742
READ TABLE gt_field_movec INTO ls_field_movec
1743
WITH TABLE KEY totable = is_t881-tab
did someone of you experience a problem of this kind?
Even performing a local copy I experienced the same and running the program RGIMOVV0 from se38 leads to the same dump. Our development is in stuck .
Regards to all

Dear sirs -
Were you able to solve your problem? We are trying to execute a client copy and cannot finish post processing steps.
We have a note into SAP as well.
Brenda

Error RW:50004 during install of R12 on win 2003

Hello,
I'm trying to install EBS R12 Express install with Vision DB via edelivery.
Had some issues with MSVC and cygwin paths, but it was resolved thanks to posts on the forum.
After about 20% of the installation [about 1hr 30mins into it], I get the following error:
RW-50004: Error code received when running external process. See log file for details.
Running Database install driver for VIS instance.
I wasn't sure which log file, so I checked the one under J:\Oracle\VIS\db\tech_st\10.2.0\appsutil\log\VIS_ora-apps\<random_number_here>.log
The relevant portion from the log file is:
<snip>
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM Run RapidClone configuration step
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo "Statusstring Configuring Database"
"Statusstring Configuring Database"
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>(echo APPS & echo APPS ) | J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jre\NT\1.5.0\bin\java -DCONTEXT_VALIDATED=true -mx512M -classpath .;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\java;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.clone.ApplyDatabase -e J:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_ora-apps.xml -stage J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz -showProgress -phase cfg -nopromptmsg
Log file located at J:\oracle\VIS\db\tech_st\10.2.0\appsutil\log\VIS_ora-apps\ApplyDatabase_08300057.log
| 0% completed
<deleted many similar lines here....>
- 0% completed
\ 0% completed RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if 1 == 0 goto :CFG_OK
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo "Cannot execute configure of database using RapidClone"
"Cannot execute configure of database using RapidClone"
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance
Processing DriverFile = J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\template\adridb.drv
Running Instantiation Drivers for J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\template\adridb.drv
instantiate file:
source : J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\template\adrun10g.cmd
dest : J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrun10g.cmd
backup : J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrun10g.cmd to J:\oracle\VIS\db\tech_st\10.2.0\appsutil\out\VIS_ora-apps\templbac\adrun10g.cmd
instantiate file:
source : J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\template\adrundb.cmd
dest : J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrundb.cmd
backup : J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrundb.cmd to J:\oracle\VIS\db\tech_st\10.2.0\appsutil\out\VIS_ora-apps\templbac\adrundb.cmd
Step 0 of 5
Command: J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrun10g.cmd
Processing Step 1 of 5
Step 1 of 5
Command: J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrundb.cmd
Processing Step 2 of 5
Executing: J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrundb.cmd
J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz>REM
J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz>REM $Header: adrundb.cmd 120.6 2006/12/21 19:50:11 marderiu noship $
</snip>
Any help on this would be appreciated.
Thanks.
Hammad.
Message was edited by:
user592768

Hussein,
I reinstalled MS VC++ again, couldn't delete those LEGACY_* registry entries though.
I thought I'd try install again before re-installing the OS. Here are the results:
I got the same error code again on the RapidInstall applet: RW-50004.
Looks like some sort of service isn't getting started or created.
However, looking at the J:\oracle\VIS\db\tech_st\10.2.0\appsutil\log\VIS_ora-apps\ApplyDBStack_XXX.log file it says:
<snip>
LSNRCTL for 32-bit Windows: Version 10.2.0.2.0 - Production on 02-SEP-2007 00:53:51
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCVIS))
The command completed successfully
ECHO is off.
Listener VIS has already been started.
ECHO is off.
addlnctl.cmd exiting with status 0
OpenService failed
adsvdlsn.cmd exiting with status 1007
ERRORCODE = 1007 ERRORCODE_END
.end std out.
.end err out.
</snip>
and further....
<snip>
[CVM Error Report]
The following report lists errors encountered during CVM Phase
<filename> <return code where appropriate>
J:\oracle\VIS\db\tech_st\10.2.0\appsutil\bin\adgentns.pl 25600
No of scripts failed in CVM phase: 1
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: J:\oracle\VIS\db\tech_st\10.2.0\appsutil\install\VIS_ora-apps
adsvdlsn.cmd INSTE8_SETUP 1007
AutoConfig is exiting with status 1
RC-50014: Fatal: Execution of AutoConfig was failed
Raised by oracle.apps.ad.clone.ApplyDBTechStack
</snip>
I also checked the NetServiceHandler.log file in the same dir and here is the trace:
<snip>
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : ora-apps
sDbDomain : spectrum-tech.com
sDbPort : 1531
sDbSid : VIS
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@ora-apps.spectrum-tech.com:1531:VIS
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12518, TNS:listener could not hand off client connection
The Connection descriptor used by the client was:
ora-apps.spectrum-tech.com:1531:VIS
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ora-apps.spectrum-tech.com)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=VIS)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12518, TNS:listener could not hand off client connection
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ora-apps.spectrum-tech.com)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=VIS)))
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ora-apps.spectrum-tech.com)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=VIS.spectrum-tech.com)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ora-apps.spectrum-tech.com)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=VIS.spectrum-tech.com)))
Connection could not be obtained; returning null
</snip>
At the end it says:
<snip>
adgentns.pl exiting with status 25600
ERRORCODE = 25600 ERRORCODE_END
</snip>
I tried pinging my oracle machine ora-apps locally and it works, i.e. if I do ping ora-apps I get a response. I also tried pinging using the dns suffix that I setup based on your instructions and I get a response as well.
Also, I when I try pinging the ora-apps machine from another one on the network using ping ora-apps, I also get the same result.
However, if I use the entire domain name, i.e. ora-apps.spectrum-tech.com, I get a response from some server on Yahoo hosting, our ISP!!!! is that a problem?
Thanks.
Hammad.

SWO_OBJTYPE_AFTER_IMPORT error in XPRA phase.

Hi All,
getting below error while applying the abap patch SAPKA71101 in XPRA Phase.
   Post-import method SWO_OBJTYPE_AFTER_IMPORT started for SOBJ L, date and time: 20100728183538
   Object type 'BUS7030' generated successfully
   Object type 'EMMAJOB' could not be generated
   Function module 'BAPI_EMMA_JOB_JOBS_SELECT' is not defined
   Function module 'BAPI_EMMA_JOB_CASES_CREATE' is not defined
   Function module 'BAPI_EMMA_JOB_CASES_GET' is not defined
   Function module 'BAPI_EMMA_JOB_DELETE' is not defined
   Function module 'BAPI_EMMA_JOB_MESSAGES_GET' is not defined
   Function module 'BAPI_EMMA_JOB_INTERVALS_GET' is not defined
   Field BAPI_EMMA_JOB-BUSINESS_PROCESS_CODE is not defined in the Data Dictionary
   Field BAPI_EMMA_JOB-BUSINESS_PROCESS_AREA is not defined in the Data Dictionary
   Field BAPI_EMMA_JOB-EXTERNAL_JOB_NUMBER is not defined in the Data Dictionary
   Field BAPI_EMMA_JOB-TRANSACTION is not defined in the Data Dictionary
   Field BAPI_EMMA_JOB-DATE is not defined in the Data Dictionary
   Field BAPI_EMMA_JOB-TIME is not defined in the Data Dictionary
   Field BAPI_EMMA_JOB-USER is not defined in the Data Dictionary
   Field BAPI_EMMA_JOB-FIELDNAME is not defined in the Data Dictionary
   Field BAPI_EMMA_JOB-FIELDNAME is not defined in the Data Dictionary
   Field BAPI_EMMA_JOB-FIELDNAME is not defined in the Data Dictionary
   Errors occurred during post-handling SWO_OBJTYPE_AFTER_IMPORT for SOBJ L
   SWO_OBJTYPE_AFTER_IMPORT belongs to package SWO
   The errors affect the following components:
      BC-DWB-TOO-BOB (Business Object Builder)
   Post-import method SWO_OBJTYPE_AFTER_IMPORT completed for SOBJ L, date and time: 20100728183538
please guide me on how to proceed further.

Hi Draviya,
Same issue I have faced already in patching SAP CE 711 and I made a mistake that I was applying the SP one by one I mean first I have finished Basis and then I started ABAP, the solution for the same is in ABAP patch 3 I guess (till I remember), we were not able to solve it with the following steps given in SAPnote 415682
The error is not that serious that the upgrade needs to be halted. It is sufficient to perform an error analysis once the upgrade is complete. For each object type with errors, you can proceed as follows:
Start transaction SWO1.
Enter the name of the object type.
Choose 'Generate'.
If you are able to generate the object type, you can ignore the error in the transport log.
If you are unable to generate the object type, choose 'Display'. Check the status of the object type. To do this, choose 'Basic data'. If the object type has the status 'Modelled' (third field), you can ignore the error in the transport log. The reason is that modelled object types have no effect on the running system. The generation of these object types will be enhanced in Release 6.10.
If the object type does not have the status 'Modelled', choose 'Check'.
Analyze the error messages.
If the error was caused by a dependency on a customer object type (object type Z, Y), correct the customer object type.
We just took our last successfull backup and restored it and then I applied the patches in whole Stack for ABAP (all components) and it worked ...
All the best !

Error occurred during the phase IMPORT_PROPER

Hi All,
We are currently installing Add-on ST-PI Rel.2008_1_620 SAPKITLRBA, and the corresponding 3 support packages SAPKITLRB1 to SAPKITLRB3, in one of the quality systems. However, an error is encountered during the installation which is as follows:
The installation was stopped, since an error occurred during the phase
IMPORT_PROPER, which the Add-On Installation Tool is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Continue in the queue display.
The following details help you to analyze the problem:
    -   Error in phase: IMPORT_PROPER
    -   Reason for error: TP_BUFFER_INCONSISTENCY
    -   Return code: 0008
    -   Error message: Pkgs. in queue don"t exist in the tp buffer (e.g.
        SAPKITLRBA)
Also, below is the SLOG of the system:
ERROR SAPKITLRBA ST6 I 0016 20110602203832 STPIUSER INUP
cpafisr5 20110602203531
STOP MAIN IMPORT ST6 I 20110602203833 INUP
cpafisr5 20110602203531
ERROR: stopping on error 16 during MAIN IMPORT
STOP imp all ST6 0016 20110602203833 INUP
cpafisr5 20110602203531
START MAIN IMPORT ST6 I 20110602203943 INUP
cpafisr5 20110602203943
START TRANSMIT BUFFER ENTR ST6 g 20110602204020 INUP
cpafist0
STOP TRANSMIT BUFFER ENTR ST6 g 0000 20110602204020 INUP
cpafist0
START COMMIT BUFFER ENTRIE ST6 g 20110602204020 INUP
cpafisk0
HALT 20110602204020
ERROR: tpsettainfo: Cofile /usr/sap/trans/cofiles/KMARK.SYN does not
exist!
ERROR: EXIT(16) -> process ID is: 10932
WARNING: TA SAPKITLRB1 not found via index, reading whole buffer
The same add-on and support packages we successfully installed in its respective developement system and in other systems as well. However, request you all to kindly assist in resolving the error.
Thanks in advance.
Regards,
Indraneel Upponi

ERROR: tpsettainfo: Cofile /usr/sap/trans/cofiles/KMARK.SYN does not exist!
Does this file exist on this location ? It seems buffer insoncistency from the error message.
Regards,
Subhash

An error has occurred during the execution of the JSPM_MAIN phase.

Hi,
When I run the go.bat for running SLD, I am getting the following exception.
An error has occurred during the execution of the JSPM_MAIN phase.
Cannot initialize application data. Could not determine profile parameters. Error while retrieving value j2ee/dbhost,j2ee/dbname,j2ee/dbtype, with retriever com.sap.sdt.tools.sysinfo.ProfileDataRetriever. Could not extract value with key j2ee/dbhost,j2ee/dbname,j2ee/dbtype, from file D:/usr/sap/CE1/SYS/profile/DEFAULT.PFL. A possible reason could be that the path to the directory containing the sappfpar executable is not included in the PATH environment variable. Could not start process sappfpar. Error while executing process sappfpar. java.io.IOException: CreateProcess: sappfpar all pf=D:/usr/sap/CE1/SYS/profile/DEFAULT.PFL error=2
You can find more information in the log file D:\usr\sap\CE1\J01\j2ee\JSPM\log\log_2007_07_11_18_49_45\JSPM_MAIN_1_01.LOG.
Use the information provided to troubleshoot the problem. An SAP Note may provide a solution to this problem. Search for SAP Notes with the following key words:
com.sap.sdt.jspm.phases.PhaseTypeJSPM
com.sap.sdt.jspm.gui.JspmUiException
Cannot initialize application data.
JSPM_MAIN
JSPMPhases
NetWeaver Upgrade
SAPJup
Java Upgrade
Any inputs regarding this highly appreciated.
Thanks
Siva

You can look at the following link, it may help
https://www.sdn.sap.com/irj/sdn/directforumsearch?userid=3474257&rankby=10001&start=90

The import was stopped, an error occurred during the phase DDIC_ACTIVATION

Dear all,
When I import the SAP_BASIS support package SAPKB70019 , it appears the error as below :
The import was stopped, since an error occurred during the phase
DDIC_ACTIVATION, which the Support Package Manager is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Support Package -> Import queue from the initial
screen of the Support Package Manager.
The following details help you to analyze the problem:
     -   Error in phase: DDIC_ACTIVATION
     -   Reason for error: TP_STEP_FAILURE
     -   Return code: 0008
     -   Error message: OCS Package SAPKB70019, tp step A, return code
         0008
Notes on phase DDIC_ACTIVATION
In this phase the imported Dictionary objects are activated. This phase
can terminate due to the following reasons:
o   TP_INTERFACE_FAILURE: The tp interface could not be called.
o   TP_FAILURE: The program tp could not be executed. For more
     information, see the SLOG or ALOG log file.
o   TP_STEP_FAILURE: The tp step DDIC activation could not be performed
     successfully. To see the cause of the error in the activation log,
     choose Goto -> Log -> Queue.
     If you import two or more Support Packages in one queue, and you do
     not activate them in the correct sequence, activation errors may
     occur. In this case, the activation errors disappear when you repeat
     the activation run. To do this, choose Support Package -> Import
     Support Package Queue.
    A prerequisite of the Support Package Manager is that the Change and
    Transport System (CTS) is configured correctly. For more detailed
    information, read the online documentation available from Help -> SAP
    Library -> mySAP Technology Components -> SAP Web Application Server ->
    Change and Transport System .
    A list of the most important SAP Notes for Online Correction Support
    (OCS) is available in SAP Note 97620, which is updated regularly.
I have used se11 to avtive the domain SEFS_CRAWL_ALGORITHM , but the error still exist.
Hope anyone can help. Thanks!
B.R
Michael

P762713 wrote:>
> Hi ,
>
>     This is general issue now a days occuring in Support Packs .The only solution for this issue is to delete structure ::
>
> these were the structure deleted from system afterwards patches were installed successfully.
>
> /1PYXXFO/SAP_PAYSLIP_____L0001
> /1PYXXFO/SAP_PAYSLIP_____T0001
> /1PYXXFO/SAP_PAYSLIP
>
> /1PYXXFO/SAP_PAYSLIP_____L0020
> /1PYXXFO/SAP_PAYSLIP_____T0020
>
> You can do this via Tcode se11 .give these info in data type & in turn you have to delete 1PYXXFO/SAP_PAYSLIP also.This has solved my issue & after this support pack went fine.
>
> Thanks..
> Mohit
>
> Edited by: mohit gupta on Sep 23, 2009 9:15 AM
Hi, mohit
      I have tried to use the t-code se11 to delete the structures, but the system telled me that they are all not exist .
A part of the queue log as below:
   Field name KEY is reserved (Do not use structure as include in DB table)
   Field name PRIOR is reserved (Do not use structure as include in DB table)
   Field KEY: Component type or domain used not active or does not exist
   Exactly one field SPRAS of type LANG: Selection as text language possible
Nametab for table /1PYXXFO/SAP_PAYSLIP_____L0001 cannot be generated
   Enhancement category for table missing
   Enhancement category for include or subtype missing
   Field name KEY is reserved (Do not use structure as include in DB table)
   Field name PRIOR is reserved (Do not use structure as include in DB table)
   Field KEY: Component type or domain used not active or does not exist
   Nametab for table /1PYXXFO/SAP_PAYSLIP_____L0020 cannot be generated
   Enhancement category for table missing
   Enhancement category for include or subtype missing
   Field name KEY is reserved (Do not use structure as include in DB table)
   Field name PRIOR is reserved (Do not use structure as include in DB table)
   Exactly one field SPRAS of type LANG: Selection as text language possible
   Enhancement category for table missing
who can help me ?
thank you very much
BR.
Michael
Edited by: Michael Hong on Sep 23, 2009 12:36 PM

An error has occurred during the execution of the PREPARE_JSPM_QUEUE phase

Hi ,
During upgrade of EHP1 - NW 700 i am getting a error in configuration step like An error has occurred during the execution of the PREPARE_JSPM_QUEUE phase
The validation of the deploy queue was not successful. Request to check queue sapjup-queue completed with error. JSPM version is 7.01.4.0.17. Current JSPM log directory is /usr/sap/BIP/DVEBMGS00/j2ee/JSPM/log/log_2009_08_11_11_44_10.
You can find more information in the log file /EHPI/java/log/PREPARE_JSPM_QUEUE_CSZ_01.LOG.
Use the information provided to troubleshoot the problem. An SAP Note may provide a solution to this problem. Search for SAP Notes with the following key words: com.sap.sdt.j2ee.phases.PhaseTypePrepareJSPMQueue com.sap.sdt.sapjup.tools.sapjupjspm.JSPMRapiException The validation of the deploy queue was not successful. PREPARE_JSPM_QUEUE INIT NetWeaver Enhancement Package Installation SAPJup Java Enhancement Package Installation
When reporting problems to SAP Support, attach the trouble ticket file /EHPI/java/log/TroubleTicket_01.txt to your message
Plz help me to analyze on this issue.
Regards,
Hari

Hi Vasil Dimitranov
Thanks for your response.I have went through the log wat u said and found that only Java Patch JSPM is deployed in my system and the others patches are found be taken from the xml file and not deployed due to this below errors.
Aug 11, 2009 11:53:33 AM [Error]: java.lang.NullPointerException:
Aug 11, 2009 11:53:33 AM [Error]: Request to check queue sapjup-queue completed with error.
Aug 11, 2009 11:53:33 AM [Error]: Request to check queue sapjup-queue completed with error.
JSPM version is 7.01.4.0.17. Current JSPM log directory is /usr/sap/BIP/DVEBMGS00/j2ee/JSPM/log/log_2009_08_11_11_44_10
Aug 11, 2009 11:53:33 AM [Info]: Message type received disconnect.
Aug 11, 2009 11:53:33 AM [Info]: Remote connection is closed.
Aug 11, 2009 11:53:34 AM [Warning]: Refusing connection.
Aug 11, 2009 11:53:34 AM [Warning]: Network input/output exception has occurred: Error during read
Aug 11, 2009 11:53:34 AM [Info]: Phase JSPM/JSPMPhases/JSPM_MAIN has been completed.
Aug 11, 2009 11:53:34 AM [Info]: Start time: 2009/08/11 11:45:25.
Aug 11, 2009 11:53:34 AM [Info]: End time: 2009/08/11 11:53:34.
Aug 11, 2009 11:53:34 AM [Info]: Duration: 0:08:08.764.
Aug 11, 2009 11:53:34 AM [Info]: Phase status is initial.
Plz help me on this to analyze regarding the check queue sapjup-queue .
Thanks in Advance.
Regards,
Hari

Error is encountered during import ABAP phase

Hi All,
When trying to install ECC6 on windows 2003 server the below error is encountered during import ABAP phase....Can any one help me in this regard.
CJS-30022 Program 'Migration Monitor' exists
ERROR 2009-07-08 08:39:33
CJS-30022 Program 'Migration Monitor' exits with error code 103.
For details see log file(s) import_monitor.java.log, import_monitor.log.
Thanks
Sandeep Singh DS

hi,
Below are the logs for import_monitor.log and import_monitor.java.log
import_monitor.log :
TRACE: 2009-07-11 21:11:30 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC' import package is started.
TRACE: 2009-07-11 21:11:30 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSSEXC' import package into database:
D:\usr\sap\EP2\SYS\exe\uc\NTI386\R3load.exe -i SAPSSEXC.cmd -dbcodepage 4103 -l SAPSSEXC.log -stop_on_error
TRACE: 2009-07-11 21:11:30 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL1' import package is started.
TRACE: 2009-07-11 21:11:30 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPAPPL1' import package into database:
D:\usr\sap\EP2\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL1.cmd -dbcodepage 4103 -l SAPAPPL1.log -stop_on_error
ERROR: 2009-07-11 21:12:38 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL1' import package is interrupted with R3load error.
Process 'D:\usr\sap\EP2\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL1.cmd -dbcodepage 4103 -l SAPAPPL1.log -stop_on_error' exited with return code 2.
For mode details see 'SAPAPPL1.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2009-07-11 21:15:10 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC' import package is interrupted with R3load error.
Process 'D:\usr\sap\EP2\SYS\exe\uc\NTI386\R3load.exe -i SAPSSEXC.cmd -dbcodepage 4103 -l SAPSSEXC.log -stop_on_error' exited with return code 2.
For mode details see 'SAPSSEXC.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2009-07-11 21:15:30
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2009-07-11 21:15:30
2 error(s) during processing of packages.
import_monitor.java.log
Java HotSpot(TM) Client VM (build 1.4.2_12-b03, mixed mode)
Import Monitor jobs: running 1, waiting 2, completed 16, failed 0, total 19.
Import Monitor jobs: running 2, waiting 1, completed 16, failed 0, total 19.
Loading of 'SAPAPPL1' import package: ERROR
Import Monitor jobs: running 1, waiting 1, completed 16, failed 1, total 19.
Loading of 'SAPSSEXC' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 16, failed 2, total 19.
Thanks,
Sandeep
Edited by: Sandeep Singh DeviSingh on Jul 13, 2009 11:42 AM

Fatal error in JRockit during memory setup phase

using jrockit-R26.0.0-jdk1.5.0_04-ia32, when I fire up java I get:
asmith@asmith:~$ java -version
[JRockit] ERROR: Fatal error in JRockit during memory setup phase.
Try to reduce the heap size using -Xmx:<size>m, i.e. "-Xmx:16m".
Could not create the Java virtual machine.
using jrockit-25.2.0-jdk1.5.0_03-linux-ia32 I get:
asmith@asmith:~$ java -version
java version "1.5.0_03"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_03-b07)
BEA JRockit(R) (build dra-45238-20050523-2008-linux-ia32, R25.2.0-28)
I ran an strace, here is the end bit:
map2(0x7faf0000, 2011136, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7faf0000
gettimeofday({1141337354, 237404}, NULL) = 0
lstat64("/usr", {st_mode=S_IFDIR|0755, st_size=264, ...}) = 0
lstat64("/usr/local", {st_mode=S_IFDIR|0755, st_size=480, ...}) = 0
lstat64("/usr/local/java", {st_mode=S_IFDIR|0755, st_size=496, ...}) = 0
lstat64("/usr/local/java/jrockit-R26.0.0-jdk1.5.0_04-ia32", {st_mode=S_IFDIR|0755, st_size=400, ...}) = 0
lstat64("/usr/local/java/jrockit-R26.0.0-jdk1.5.0_04-ia32/jre", {st_mode=S_IFDIR|0755, st_size=184, ...}) = 0
lstat64("/usr/local/java/jrockit-R26.0.0-jdk1.5.0_04-ia32/jre/lib", {st_mode=S_IFDIR|0755, st_size=1760, ...}) = 0
lstat64("/usr/local/java/jrockit-R26.0.0-jdk1.5.0_04-ia32/jre/lib/i386", {st_mode=S_IFDIR|0755, st_size=1216, ...}) = 0
lstat64("/usr/local/java/jrockit-R26.0.0-jdk1.5.0_04-ia32/jre/lib/i386/jrockit", {st_mode=S_IFDIR|0755, st_size=144, ...}) = 0
lstat64("/usr/local/java/jrockit-R26.0.0-jdk1.5.0_04-ia32/jre/lib/i386/jrockit/libjvm.so", {st_mode=S_IFREG|0755, st_size=3033108, ...}) = 0
sysinfo({uptime=95920, loads=[33984, 36576, 38560] totalram=778179, freeram=32497, sharedram=0, bufferram=242423} totalswap=2281220, freeswap=2276833, procs=135}) = 0
uname({sys="Linux", node="asmith", ...}) = 0
open("/proc/self/maps", O_RDONLY) = 4
fstat64(4, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x77fd6000
read(4, "00000000-00002000 ---p 00000000 "..., 1024) = 1024
read(4, " /lib/tls/i686/cmov/libm-2."..., 1024) = 665
close(4) = 0
munmap(0x77fd6000, 4096) = 0
mmap2(0xc0000000, 65536, PROT_NONE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x77bbf000
munmap(0x77bbf000, 65536) = 0
mmap2(0x7fd00000, 1073741824, PROT_NONE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_NORESERVE, -1, 0) = 0x37bcf000
mmap2(0x78000000, 16781312, PROT_NONE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_NORESERVE, -1, 0) = 0x78000000
mmap2(0x79200000, 16781312, PROT_NONE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_NORESERVE, -1, 0) = 0x79200000
mmap2(0x7a400000, 2097152, PROT_NONE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_NORESERVE, -1, 0) = 0x7a400000
mmap2(0x7a700000, 2097152, PROT_NONE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_NORESERVE, -1, 0) = 0x7a700000
mprotect(0x78000000, 4096, PROT_READ|PROT_WRITE) = 0
mprotect(0x79200000, 4096, PROT_READ|PROT_WRITE) = 0
mprotect(0x7a400000, 2097152, PROT_READ|PROT_WRITE) = 0
mprotect(0x7a700000, 2097152, PROT_READ|PROT_WRITE) = 0
llseek(3, 0, [0], SEEKSET) = 0
read(3, "MemTotal: 3112716 kB\nMemFre"..., 1024) = 598
read(3, "", 1024) = 0
mprotect(0x7fd00000, 67108864, PROT_READ|PROT_WRITE) = -1 ENOMEM (Cannot allocate memory)
write(2, "[JRockit] ERROR: ", 18[JRockit] ERROR: ) = 18
write(2, "Fatal error in JRockit during me"..., 114Fatal error in JRockit during memory setup phase.
Try to reduce the heap size using -Xmx:<size>m, i.e. "-Xmx:16m".) = 114
write(2, "\n", 1
) = 1
write(2, "Could not create the Java virtua"..., 43Could not create the Java virtual machine.
) = 43
exit_group(1) = ?
linux kernel:
Linux asmith 2.6.15-16-k7 #1 SMP PREEMPT Mon Feb 20 18:14:55 UTC 2006 i686 GNU/Linux
This is an ubuntu linux custom kernel.
glibc version:
GNU C Library stable release version 2.3.6, by Roland McGrath et al.
Copyright (C) 2005 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
Compiled by GNU CC version 3.4.6 20060117 (prerelease) (Ubuntu 3.4.5-1ubuntu5).
Compiled on a Linux 2.6.11 system on 2006-02-04.
Available extensions:
GNU libio by Per Bothner
crypt add-on version 2.1 by Michael Glad and others
GNU Libidn by Simon Josefsson
linuxthreads-0.10 by Xavier Leroy
BIND-8.2.3-T5B
libthread_db work sponsored by Alpha Processor Inc
NIS(YP)/NIS+ NSS modules 0.19 by Thorsten Kukuk
Thread-local storage support included.
For bug reporting instructions, please see:
<http://www.gnu.org/software/libc/bugs.html>.
Let me know what other info you might need.
-Allen

This is a known issue and has been solved. The only release it appears in is R26.0.0. The next service pack will be release Q2 2006.
If you have a customer support contract BEA you can request a patched version including the fix for CR252095. The fix is included in R26.1.0 (Java 5.0 on Solaris) and will be included in the next Java 1.4 release (R26.2.0) of JRockit but I am afraid that this does not help you much. This particular bug was nnot present in earlier versions of JRockit.
A possible (probably tedious) workaround is to try and specify an upper limit of memory for objects through -Xmx (for example -Xmx64m) and with some luck the heap will be set up correctly.
/mattias - JRockit Memory Managment Group

Error in the PREP_GENCHECKS/NTACT_CHK phase

Hello,
I am getting an error in the PREP_GENCHECKS/NTACT_CHK phase during the "Checks" roadmap step in SAP Ehpi 700, while installing EHP4 for ERP 6.0.
This is the error it talks about:
ERROR> *** ERRORS during NAMETAB CHECK found ***
Analyze the logfile NTCHK.ELG to determine the nametab, that caused the error. Call transaction se11 for the corresponding DDIC object. Choose menu Utilities -> Runtime Object -> Check. If you repeat the phase and there is still an error, see also note Nr. 179334 for additional information.
This is what I found in NTCHK.ELG file:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CHKANT and RETURN CODE in PN400701.EV2
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2EETP399XRead table "M_DEBI                        ": pgntab call: table not found.
2AETP399 Table "M_DEBI                        ": unknown error -9
2EETP399XRead table "M_ORDE                        ": pgntab call: table not found.
2AETP399 Table "M_ORDE                        ": unknown error -9
2EETP399XRead table "M_PRSM                        ": pgntab call: table not found.
2AETP399 Table "M_PRSM                        ": unknown error -9
2EETP399XRead table "M_ZCRD                        ": pgntab call: table not found.
2AETP399 Table "M_ZCRD                        ": unknown error -9
2EETP399XRead table "M_ZCST                        ": pgntab call: table not found.
2AETP399 Table "M_ZCST                        ": unknown error -9
2EETP399XRead table "M_ZESS                        ": pgntab call: table not found.
2AETP399 Table "M_ZESS                        ": unknown error -9
2EETP399XRead table "M_ZEST                        ": pgntab call: table not found.
2AETP399 Table "M_ZEST                        ": unknown error -9
2EETP399XRead table "M_ZINC                        ": pgntab call: table not found.
2AETP399 Table "M_ZINC                        ": unknown error -9
2EETP399XRead table "M_ZKTX                        ": pgntab call: table not found.
2AETP399 Table "M_ZKTX                        ": unknown error -9
2EETP399XRead table "M_ZMA1                        ": pgntab call: table not found.
2AETP399 Table "M_ZMA1                        ": unknown error -9
2EETP399XRead table "M_ZMAC                        ": pgntab call: table not found.
2AETP399 Table "M_ZMAC                        ": unknown error -9
2EETP399XRead table "M_ZMAI                        ": pgntab call: table not found.
2AETP399 Table "M_ZMAI                        ": unknown error -9
2EETP399XRead table "M_ZMAJ                        ": pgntab call: table not found.
2AETP399 Table "M_ZMAJ                        ": unknown error -9
2EETP399XRead table "M_ZMNH                        ": pgntab call: table not found.
2AETP399 Table "M_ZMNH                        ": unknown error -9
2EETP399XRead table "M_ZMNI                        ": pgntab call: table not found.
2AETP399 Table "M_ZMNI                        ": unknown error -9
2EETP399XRead table "M_ZPER                        ": pgntab call: table not found.
2AETP399 Table "M_ZPER                        ": unknown error -9
2EETP399XRead table "M_ZUOM                        ": pgntab call: table not found.
2AETP399 Table "M_ZUOM                        ": unknown error -9
1 ETP111 exit code           : "12"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CHKANT and RETURN CODE in PN410701.EV2
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code           : "0"
As mentioned in SAP note 179334, when I tried to activate these table pools in the ABAP dictionary (SE11), it gave me an error "Maintain size category in SE13". After maintaining the size category and putting it in an SAP standard package, I tried to activate again in SE11. But now I am getting another error - "Table M_ZUOM: active nametab could not be read. Length of VARDATA field cannot be changed."
How do I activate these table pools and get on with the EHP4 installation?
I am on SAPKB70018, so I don't need to apply the note 695195.
Thanks,
Ajay

Hi
> As mentioned in SAP note 179334, when I tried to activate these table pools in the ABAP dictionary (SE11), it gave me an error "Maintain size category in SE13". After maintaining the size category and putting it in an SAP standard package, I tried to activate again in SE11. But now I am getting another error - "Table M_ZUOM: active nametab could not be read. Length of VARDATA field cannot be changed."
>
> How do I activate these table pools and get on with the EHP4 installation?
As you are now getting error that length of VARDAT field cannot change. Then check on database level and if it does not contain any data then change field length manually as per in logs. Then try again
Thanks
Sunny

Error in Import Java Dump phase while installing SAP solution Manager 7.1

Hi,
While installing SAP solution manager 7.1 I am getting the below error during the phase "Import Java Dump".
An error occurred while processing option SAP Solution Manager 7.1 > SAP Systems > MS SQL Server > Central System > Central System( Last error reported by the step : Execution of JLoad tool 'C:\j2sdk1.4.2_17-x64\bin\java.exe -classpath "C:\Program Files\sapinst_instdir\SOLMAN71\SYSTEM\MSS\CENTRAL\AS\install\sharedlib\launcher.jar" -showversion -Xmx1024m com.sap.engine.offline.OfflineToolStart com.sap.inst.jload.Jload "C:/Program Files/sapinst_instdir/SOLMAN71/SYSTEM/MSS/CENTRAL/AS/install/lib/iaik_jce.jar;C:/Program Files/sapinst_instdir/SOLMAN71/SYSTEM/MSS/CENTRAL/AS/install/sharedlib;D:/usr/sap/SPT/SYS/exe/uc/NTAMD64/mssjdbc/sqljdbc.jar" -sec SPT,jdbc/pool/SPT,
smn/sapmnt/SPT/SYS/global/security/data/SecStore.properties,
smn/sapmnt/SPT/SYS/global/security/data/SecStore.key -dataDir "D:/SAP SOLMAN/Java Components/51040039\DATA_UNITS\SOLMAN_JAVA_EXPORT_JDMP" -job "C:\Program Files\sapinst_instdir\SOLMAN71\SYSTEM\MSS\CENTRAL\AS\IMPORT.XML" -log jload.log' aborts with return code 1. SOLUTION: Check 'jload.log' and 'C:/Program Files/sapinst_instdir/SOLMAN71/SYSTEM/MSS/CENTRAL/AS/jload.java.log' for more information.
JLOAD.JAVA log details below
java version "1.4.2_17"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_17-b06)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_17-b06, mixed mode)
Jload R 7.12 V 0 A 0
Jload -sec SPT,jdbc/pool/SPT,
smn/sapmnt/SPT/SYS/global/security/data/SecStore.properties,
smn/sapmnt/SPT/SYS/global/security/data/SecStore.key -dataDir D:/SAP SOLMAN/Java Components/51040039\DATA_UNITS\SOLMAN_JAVA_EXPORT_JDMP -job C:\Program Files\sapinst_instdir\SOLMAN71\SYSTEM\MSS\CENTRAL\AS\IMPORT.XML -log jload.log
Connecting to database
Couldn't connect to DB
com.sap.inst.common.exception.DBConnectionException: com.microsoft.sqlserver.jdbc.SQLServerException: The TCP/IP connection to the host has failed. java.net.ConnectException: Connection refused: connect
     at com.sap.inst.common.db.DBConnection.connect(DBConnection.java:157)
     at com.sap.inst.jload.Jload.main(Jload.java:222)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: com.microsoft.sqlserver.jdbc.SQLServerException: The TCP/IP connection to the host has failed. java.net.ConnectException: Connection refused: connect
     at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(Unknown Source)
     at com.microsoft.sqlserver.jdbc.SQLServerConnection.connectHelper(Unknown Source)
     at com.microsoft.sqlserver.jdbc.SQLServerConnection.loginWithoutFailover(Unknown Source)
     at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(Unknown Source)
     at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(Unknown Source)
     at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:215)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.createConnection(OpenSQLDataSourceImpl.java:522)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.getConnection(OpenSQLDataSourceImpl.java:276)
     at com.sap.inst.common.db.DBConnection.connectViaSecureStore(DBConnection.java:111)
     at com.sap.inst.common.db.DBConnection.connect(DBConnection.java:151)
     ... 6 more
An error occured during execution. Please consult SAP note 942766 for first steps on troubleshooting the problem.
I have gone thru with the notes and it didn't help me much.
I have used J2SDK 1.4.2_17 nad JCE_Policy-1.4.2 files.
Please let me know where IO went wrong.
Thanks in advance.
Sai

Hi,
1. Did you select java path (Export CD/DVD) while intsallation? Check once again.
2. Add JAVA_HOME = Java path in environment variable.
3. What is the exact error, you got it, post error here.
Regards,
Srini Nookala

EBS 12.1.1 failed during autoconfig phase of upgradation

Hi,
I'm in process of upgradation of ebs 11.5.9 to r12.1.1 on solaris 9. database is 9.2.0.8.
during the upgradation phase autoconfig is failed with errors.
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='jdbc:oracle:thin:@(DESCRIPTION=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=scciapps)(PORT=1571)))(CONNECT_DATA=(SID=test)))'
Trying to connect using APPS_JDBC_URL
Exception occurred: java.sql.SQLException: ORA-01017: invalid username/password; logon denied
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : scciapps
sDbDomain : sharjah.gov.ae
sDbPort : 1571
sDbSid : test
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@scciapps.sharjah.gov.ae:1571:test
Exception occurred: java.sql.SQLException: ORA-01017: invalid username/password; logon denied
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=scciapps.sharjah.gov.ae)(PORT=1571))(CONNECT_DATA=(SERVICE_NAME=test)))
Exception occurred: java.sql.SQLException: ORA-01017: invalid username/password; logon denied
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=scciapps.sharjah.gov.ae)(PORT=1571))(CONNECT_DATA=(SERVICE_NAME=test.sharjah.gov.ae)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
Connection could not be obtained; returning null
where i use the same username and password of apps of existing database/application.
anyone have idea about that...?
Thanks,

yes, all the values are correct.
As I've given existing database port number, sid and server info of 11.5.9.
below are some information from installation log.
Oracle Applications Rapid Install Wizard Install log
>> Using Rapid Wizard Version : 12.1.1.9
>> Install session started : Mon Jan 31 13:35:43 GST 2011
>> Rapid Wizard source location : /oracle/StageR12/startCD/Disk1/rapidwiz
>> Command Line arguments for this run :
=================================================================
Install Session Information
Host Name : scciapps.sharjah.gov.ae
Host Operating System : Solaris SPARC
User running Install : appltest
=================================================================
InstUpgPanel
     User action : Upgrade Oracle Applications file System
     Install type : Upgrade
PortPanel
          Selected port pool:
               Database Port : 1571
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : scciapps
sDbDomain : sharjah.gov.ae
sDbPort : 1571
sDbSid : test
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@scciapps.sharjah.gov.ae:1571:test
Connection obtained
but it fails during autoconfig phase.
Thanks,

Starting JVM Tool Interface agents in the VM during live phase

The JVM Tool Interface(JVMTI) specification says that the JVMTI agents can be started in the VM during live phase but they havent mentioned how it can be done. Has anyone tried this before or got any hints on how to do it?

Hi,
Erika, first and foremost please try logging into SQLPlus and unlock the ddic login.
Following is the procedure, check what is the username for shadow instance user, whether it is SAPR3SHD or SAP<SID>SHD. Use whichever applicable
unlock them throught OS/DB level :
example for Oracle as <sid>adm :
svrmgrl
connect internal
update sapr3shd.usr02 set uflag=0 where bname='ddic' and mandt='000';
commit;
exit
Note about uflag values :
0 User not locked
32 (Hex 20) Locked by central administrator of CUA
64 (Hex 40) Locked by administrator
128 (Hex 80) Locked due to incorrect messages
Now once you have unlocked the user. stop the shadow instance and start it once again. Now try to login to the shadow instance using ddic user and password.
If you are able to then try repeating the START_SHDI_FIRST phase and check.
If it doesnt go through and the error comes again. check whether you have entry for sapgw09 in /etc/services file.
Also you can check by logging in the original SAP system in transaction SM59, whether the ABAP connection for Shadow instance is working fine or not.
If this info is informative and helpful in resoving the error do reward points
Regards,
Suhas
Edited by: Suhas Ajgaonkar on Mar 14, 2008 12:02 PM

Error in AGR_XPRA_REGENERATE_SAP_NEW during XPRA Phase

Similar Messages

Maybe you are looking for