Error in all dashboard in RPM

Hi there;
In RPM I created user TEST and assigned ABAP roles SAP_XRPM_ADMINISTRATOR and SAP_XRPM_USER by transaction SU01.
After that I go in portal (USER ADMINISTRATION > IDENTITY MANAGEMENT TAB) and link standard portal role PORTFOLIO MANAGEMENT with SAP_XRPM_ADMINISTRATION role.
When user TEST logon in RPM, he has an error in all dashboard iview;
This is the error:
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 06:28_03/02/10_0009_408847850
Refer to the log file for details about this exception.
I had different test and I solved the problem assigning ABAP roles SAP_J2EE_ADMIN, but this isn't good for production scenario.
Someone could help me to solve the error without assign SAP_J2EE_ADMIN ABAP role?
Thank you very much
Best regard
Luciano

Solved: I give auth on portal content
Thanks
Luciano

Similar Messages

Getting error while Enable Dashboard Widget

Dear Experts,
I am getting error while Enable Dashboard Widget
u201CInstall SAP Business One Integration Service before enabling the dashboard widgetu201D
Even I follow all step by step process.
Thanks
Kamlesh

Hi Kamlesh,
Have you tried the following:
Deactivate the cockpit in your Business One database - Disable My Cockpit and also disable cockpit in General Settings
Run EventSender Setup (in first step try to avoid using localhost or IP addresses)
In third step press Test Connection, in fourth step make sure that your database is checked, press also Receiver but ton and then Test Connecion.
Finish EventSender setup.
Click on SLD in the B1i Framwork and ensure connection to the Company databsae (B1DI and JDBC) is successful.
Go back to B1i Framework UI, click Scenarios in upper menu, then select Control in left menu and (re)activate Xcelsius scenario.
Restart EventSender service, Integration Service and Proxy services via Servies (Computer Management)
Now you can enable cockpit in your Business One database - enable cockpit in General Settings and then enable My Cockpit.
After installation of B1ic, the company is not listed in the SLD
Delete all entries of table SLSP and SLSPP in SBOCOMMON. Restart integration service. In SAP Business refresh the company list.
These solutions are documented in the attached Note 1619422.
Kind regards
Sean

I've cleared almost 30 gig off of my hard drive in the past 2 weeks, and it will temporarily show that in the Get Info box. But hours later, I am still getting a disk full error and all of the memory has disappeared.

I've cleared almost 30 gig off of my hard drive in the past 2 weeks, and it will temporarily show that in the Get Info box. But hours later, I am still getting a disk full error and all of the memory has disappeared. I have cleared my backup logs from Time Machine, checked the mail folder, cleaned out tons of photos and videos and it still keeps filling back up.
In checking the log files, here is the message repeated over and over....
Jul 4 07:18:13 Donald-Keele-Jrs-iMac-123.local CalendarAgent[213]: CoreData: error: (21) I/O error for database at /Users/donjr/Library/Calendars/Calendar Cache. SQLite error code:21, 'unable to open database file'
Jul 4 07:18:13 Donald-Keele-Jrs-iMac-123.local CalendarAgent[213]: Core Data: annotation: -executeRequest: encountered exception = I/O error for database at /Users/donjr/Library/Calendars/Calendar Cache. SQLite error code:21, 'unable to open database file' with userInfo = {
NSFilePath = "/Users/donjr/Library/Calendars/Calendar Cache";
NSSQLiteErrorDomain = 21;
Jul 4 07:18:14 Donald-Keele-Jrs-iMac-123.local cfprefsd[180]: CFPreferences: error creating file /Users/donjr/Library/Preferences/com.apple.iPhoto.plist.t3l894p: 28
Jul 4 07:18:30 Donald-Keele-Jrs-iMac-123.local Printer Pro Desktop[275]: Empty task
Jul 4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: [0x16697c0] |ISyncSession|Warning| com.microsoft.Entourage2008: transitioning to cancel - session cancelled by server: Client 'com.microsoft.Entourage2008' tried to start a session for the plan 45AD80C3-0D52-4CF2-8CBA-103564B6C47C and the plan no longer exists.
Jul 4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: Warning: NSBundle NSBundle </Applications/Microsoft Office 2008/Office/Microsoft Sync Services.app/Contents/Resources/MicrosoftOfficeNotes.syncschema> (not yet loaded) was released too many times. For compatibility, it will not be deallocated, but this may change in the future. Set a breakpoint on __NSBundleOverreleased() to debug
Jul 4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: Warning: NSBundle NSBundle </Users/donjr/Library/Sync Services/Schemas/MicrosoftOfficeNotes.syncschema> (not yet loaded) was released too many times. For compatibility, it will not be deallocated, but this may change in the future. Set a breakpoint on __NSBundleOverreleased() to debug
Jul 4 07:18:45 Donald-Keele-Jrs-iMac-123 kernel[0]: (default pager): [KERNEL]: default_pager_backing_store_monitor - send LO_WAT_ALERT
Jul 4 07:18:45 Donald-Keele-Jrs-iMac-123 kernel[0]: macx_swapoff SUCCESS
Jul 4 07:19:31 Donald-Keele-Jrs-iMac-123.local Printer Pro Desktop[275]: Empty task
Any ideas on what to do next?
I'm running and iMac 20-inch early 2009
Processor 2.66 GHz Intel Core 2 Duo
Memory 8 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 9400 256 MB
Software OS X 10.8.4 (12E55)

Step 1
Quit Calendar. Triple-click the line below to select it:
~/Library/Calendars/Calendar Cache
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window should open with a file named "Calendar Cache" selected.
Move the selected file to the Trash. There may be one or two other files in the same folder with names that begin in "Calendar Cache". If so, delete those files too.
Step 2
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash as well:
iPhoto ▹ Empty Trash
Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
To locate large files, you can use Spotlight. That method may not find large folders that contain a lot of small files.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders. It may take some minutes for ODS to list all the files.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal.

Error While Trying to update RPM Second time in the same session as Create

I am getting this error when I try to update item as soon as I create a new one.
Error is
Source type \CLASS=/RPM/CL_PORTFOLIO_O is not compatible, for the purposes of assignment, with target type \CLASS=/RPM/CL_BUCKET_O
CX_SY_MOVE_CAST_ERROR /RPM/CL_SMODEL_API============CP /RPM/CL_SMODEL_API============CM00E 62
When I close the browser and come back I am able to update the item properly. I am not sure if there is any kind of locking happening as soon as we create an item.
In the standard SAP functionality, he is redirecting to item overview.
Appreciate any help in this regard.
Thanks,
Kumar

Hi Kumar,
First check if the components cprxrpm and cprxrpm_ui are both on the same level of SP.
Also make sure the J2EE restart had beem done after the SP upgrade.
Regards,
Prashanth

I'm getting a Download Error warning after attempting to download and install CC. No error code – just a button prompt to Reload Applications which takes me straight back to the Download Error. All my previously installed CC apps work fine but I need to u

I'm getting a Download Error warning after attempting to download and install CC. No error code – just a button prompt to Reload Applications which takes me straight back to the Download Error. All my previously installed CC apps work fine but I need to upgrde to be compatible with colleagues. Thanks

I'm having exactly the same problem......I'm running an iMac with OS X 10.10.1. We have BT fibre optic business broadband. Everything has been running just fine until about 2 weeks ago when the apps in my CC panel just disappeared. I have made no changes to our systems and I am the only person to administer it all.....

I d/l your mozilla firefox today and now I get the error 0x80070002 all the time...how do I fix that?

I downloaded mozilla firefox today and now I get the error 0x80070002 all the time, and I cannot use system restore because of it. How do I fix that so that my computer works right again. I was restoring because after I d/l your mozilla today, I lost all of my contacts in my msn email...just been tearing my hair out over this and it is soo darn frustrating. Tell me how to fix this. Marilyn

Hi,
The error is totally unrelated to Firefox. Please see [http://support.microsoft.com/kb/910336 this]. The [http://answers.microsoft.com/en-us Windows OS forum] will also be helpful.
Please also check the downloaded file by right-clicking > Properties > Digital Signatures, which should say '''Mozilla Corporation''' and '''This digital signature is ok''' in '''Details'''. You can download Firefox from a known site like e.g. https://www.mozilla.org/en-US/firefox/new/
You can try to Reset Firefox which would hopefully display the missing features, all (contacts, emails, settings etc.) of which are actually stored at the MSN site and are temporarily displayed by Firefox every time the site is accessed.
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

Error message, all lights blinking on F380

My printer has been checked over and over. Message comes up as error..all lights blink. The cartridge will not center. I have removed and reinstalled. The paper is not jammed, the cartridges read full., but all lights keep blinking.indicating paper and cartridges.I have gone over every troubleshooting option.The cartridges move back and forth freely, but instead of centering the always rest at right side of printer when I look into inside of printer. Ihave removed back,there are no blocages

It might be going bad, I hear the motorola modems tend to overheat. If I were you I'd take the top off the modem and just leave it with the top of the plastic cover off so it won't overheat. Another thing you could try is a different power adapter of the same voltage and see if that's what's going bad. Let us know what happens.

I created a book and tried to place order but failed. I followed the procedures, when the book completed uploading, the message "An error occured uploading your order" pop up. There was no error message all along when I created the book.

I created a book and tried to place order but failed. I followed the procedures, when the book completed uploading, the message "An error occured uploading your order" appeard. There was no error message all along when I created the book. I tried several time but failed.

preview the order and try again - http://support.apple.com/kb/HT1040
If it still does not work boot into Safe Mode, preview again and try
With the number of reports in the last few days it may be server overload - if so trying during a time of lower activity might help
LN

Error Handling - displaying Error on ALL error events

I am trying to set up a global error handling page error.cfm so that whenever any error at all occurs I can display my error.cfm page.
At first I tried the following in the application.cfm page, and then ran a page that tried to output a variable that did not exist, and it seemed to work:
<cferror type = "EXCEPTION" exception = "any" template = "error.cfm">
But then it just decided not to work, so I added these
<cferror type = "REQUEST" template = "error.cfm">
<cferror type = "VALIDATION" template = "error.cfm">
Is there a way to make sure that all errors are handled? Am I right in putting all 3 of these in the application.cfm or do I need more (or less?)
Thanks
Mark

It just didn't react to the error, by going to error.cfm, it just threw out the usual CF error as if I had not added CFERROR
With those 3 statements in there is seems to work, but I wanted to make sure that no matter what error occurs it's going to hit the error.cfm

We are running 3 batches parallel(a.ksh,b.ksh,c.ksh parallel ) .if a.ksh will complete then d.ksh will start('d' start when 'a' will terminate successfully) and we have to handle error for all jobs ( if some job got aborted during runtime) ?

we are running 3 batches parallel(a.ksh,b.ksh,c.ksh parallel ) .if a.ksh will complete then d.ksh will start('d' start when 'a' will terminate successfully) and we have to handle error for all jobs ( if some job got aborted during runtime) ?

Moderator Action:
You already asked this question, two days earlier.
https://forums.oracle.com/thread/2585158
Stay with your original post. Deliberate multiple posting is the same as spamming the forums.
This new post is locked.

Access privileges error on all documents

Dear Sir,
i am facing error on all fill access denied. please help screen shot attached.
thanks

Hi,
Access denied error is a common error message and occurs mainly due to permission issues. To find the clue of root cause, we need detailed information about the problem, such as when and how the issue occurred?
If you get the Access Denied message when opening the file or folder, even though you are the administrator of the computer, then most likely you need to reset the file or folder permissions. Note that access permissions are only available on NTFS. There
are no permissions on FAT or exFAT.
This situation may occur when:
a. You transfer the files from a different computer, or a different Windows installation, and the files have custom permissions configured.
b. You back up the files, reinstall Windows, and try to access the files afterwards.
Based on the current situation, I would like to share the link below with you to check the issue:
Solution Center for Access Denied Error Messages:
https://support.microsoft.com/gp/access-denied
How do I open a file if I get an access denied message?:
http://windows.microsoft.com/en-US/Windows7/How-do-I-open-a-file-if-I-get-an-access-denied-message
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

[ERROR] Limit all payment cards except one

Hello Experts,
When we are using Multiple Credit Card payment option, we are getting the error "Limit all payment cards except one".
There is no option/flag to mark the limit for all cards. How to get rid of this error?
And I expect the amount to be split equally across all the cards which is not happening. Is it the case that user should enter the amount manually for all the cards? What if the user enters less/more amount and try to order?
Appreciate your quick reply on this. Got stuck with this error to create orders from webshop.
Thanks in Advance.
Regards
Satish

Hi Satish,
Even i am getting the same error. But i am using only one card and getting this error whenever i enter an amount value. when the amount is 0 there is no error. Can you pls tell me why is this error coming. Is there a place where i need to maintain or assign any values to the card.
thanks,
Manas.

Essbase error 101 all 255 user sessions are in use

Hi There,
I try to connect to EAS and I got the following error:
essbase error 101 all 255 user sessions are in use
I have administrator right, wondering how to fix this?
Thanks

You must be on an older version and licensing scheme of essbase where number of ports could be restricted by license. Try bouncing off essbase service and you should be able to connect.
For future, add the settings to automatically kick off user session after x number of minutes to avoid ghost sessions.

It shows the log sequence not found error while all the log seqences exist?

Why the database shows the log sequence not found error while all the log seqences exist?
SQL> select*from v$log_history;
RECID STAMP THREAD# SEQUENCE# FIRST_CHANGE# FIRST_TIM NEXT_CHANGE#
RESETLOGS_CHANGE# RESETLOGS
1 657328345 1 1 519368 13-JUN-08 543434
519368 13-JUN-08
2 657370849 1 2 543434 13-JUN-08 567705
519368 13-JUN-08
3 657373012 1 3 567705 14-JUN-08 570408
519368 13-JUN-08
RECID STAMP THREAD# SEQUENCE# FIRST_CHANGE# FIRST_TIM NEXT_CHANGE#
RESETLOGS_CHANGE# RESETLOGS
4 657373039 1 4 570408 14-JUN-08 570464
519368 13-JUN-08
5 657374623 1 5 570464 14-JUN-08 573505
519368 13-JUN-08
6 657375015 1 6 573505 14-JUN-08 573856
519368 13-JUN-08
RECID STAMP THREAD# SEQUENCE# FIRST_CHANGE# FIRST_TIM NEXT_CHANGE#
RESETLOGS_CHANGE# RESETLOGS
7 657376537 1 1 570465 14-JUN-08 573543
570465 14-JUN-08
8 657377084 1 2 573543 14-JUN-08 575109
570465 14-JUN-08
9 657377094 1 3 575109 14-JUN-08 575114
570465 14-JUN-08
RECID STAMP THREAD# SEQUENCE# FIRST_CHANGE# FIRST_TIM NEXT_CHANGE#
RESETLOGS_CHANGE# RESETLOGS
10 657377103 1 4 575114 14-JUN-08 575121
570465 14-JUN-08
11 657377106 1 5 575121 14-JUN-08 575123
570465 14-JUN-08
11 rows selected.
RMAN> flashback database to sequence=10 thread=1;
Starting flashback at 14-JUN-08
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=155 devtype=DISK
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of flashback command at 06/14/2008 13:03:15
RMAN-20206: log sequence not found in the repository

Apart from the output being hardly readable (please refer to the FAQ in the right upper hand corner how to post output), I don't see any sequence 10.
You seem to mistake the column recid for the sequence column.
The sequences are listed in -not surprisingly- the sequence# column.
Sybrand Bakker
Senior Oracle DBA

Trying to resolve a "_OBJC_METACLASS_$_CDVCommandQueue" with MainViewControllers.a, MainViewControllers.o, 7 in total. Apple Mach-O Linker error for all 7. Thanks to any assistance.

Trying to resolve a "_OBJC_METACLASS_$_CDVCommandQueue" with MainViewControllers.a, MainViewControllers.o, 7 in total. Apple Mach-O Linker error for all 7. Thanks to any assistance.

No I didn't even read through your post, to long.
You said that "No matter what program I try to install, as soon as the installer opens it crashes". Were you talking about the install for this/these 3D programs or ANY program? As it is worded it sounded like ANY program. That tells me there is a problem with your Mac, software or hardware.
Now you say others install programs, which is it. Programs other then the 3D ones install or no programs install?
Could simply be your Mac is to old to run these programs and the installer knows that. You never said what model or year Mac it is.

Error in all dashboard in RPM

Similar Messages

Maybe you are looking for