Error in allocating ExciseJV number Num. generation Part2 Serial J_1IRG23A2

Dear All
We are Unable to post Document through J1IH --> Additional Excise for particular Excise group.
The error shown is as "Error in allocating Excise JV number Number generation Part2 Serial J_1IRG23A2".
Altough we have maintained the Excise number range for Object J_1IRG23A2 for that particular series through J1I9/SNRO
Request you to help me please...
Thanks & regards
Sameer Chitre
+91 9011918854

Dear All,
The error is solved as of now,we have maintained interval "1" instead of "01".
After maintaining the interval "01" the problem is been resolved.
Thanks & regards
Sameer Chitre

Similar Messages

  • Error in allocating Despatch number Interval not found Number object J_1IIN

    Dear All,
    I am facing a problem while doing an excise invoice. System is throwing an error saying that " Error in allocating Despatch number Interval not found Number object J_1IINTPR2.
    Can somebody help me with a solution ?
    Rgds,
    Indrajit Dey

    Dear Indrajit
    Go to SNUM, input object J_1IINTPR2 and click on Number Ranges.  Enter [Excise Group]  and click on Intervals (with pencil icon).  Maintain the number range and save.  Now try the process once again.
    thanks
    G. Lakshmipathi

  • Error in allocating internal number range J_1IINTNUM

    HI GURUS,
    IHAM FACING THIS ERROR WHILE SAVING EXCISE INVOICE IN J1IIN ,
    I HAVE ALSO MAINTAINED NUMBER RANGE IN SNRO FOR OBJECT AND SERIES GROUP COMB. FOR J_1IINTNUM
    PLEASE REVRT TO IT
    THANKS IN ADVANCE

    but i have already tried this same is the case with other objects also like j_1iexloc etc.
    For all the number range objects you need to maintain like above.

  • Subcontracting number range generation failure

    Dear all,
      When im going to create subcontracting challan an error message comes
    Subcontracting number range generation failure
    pls guide me
    Thanks
      Amin

    Dear ,
    table nriv comes like
    object           sub object     to year   from no        to num                  nr level                       extend ind
    j_1i57fc        S2                  2007   000000001        9999999999    00000000000000      -
    (blank)
    my current year is 2007
    Thanks
    Amin

  • Error in allocating Despatch serial number

    Hi friends ,
    I am trying to save a commercial invoice and the setting allows to print the exicse invoice immediately. But on pressing the save button in VF01, update gets terminated.
    error : Error in allocating Despatch serial number Interval not found Number object J_1IINTPR2
    Message no. 8I 336
    Can anyone advise?
    Thks/Vinod
    messenger id
    [email protected]

    Hi Vinod,
    Please check whether the number range is maintained for the object or the number range might have exhausted
    Hope this helps.
    Sridhar

  • Error in allocating Despatch serial number Interval not found Number object

    Hi All,
    While saving the Excise Invoice(created w.r.to Invoice) in J1IIN system is throwing the error:
    "Error in allocating Despatch serial number Interval not found Number object J_1IINTPR2
    Message no. 8I336"
    The Excise Group(say 99) was created.
    But the same is not reflecting in the drop down list of SNUM for maintaining the No.Range in the Object  J_1IINTPR2.
    Do the needful to resolve this issue.
    Needless to say helpful answers will be rewarded.
    Regards,
    Raj Kumar Reddy.

    Dear Raj,
    Go to Excise group details here you check these settings
    IMG>Logistics general>Tax on Goods movements>India>Basic settings-->Maintain Excise groups
    Have you check all these check boxes
    1.Excise Inv during billing
    2.Create and Post Invsingle step                    
    3,Depot Excise invoice
    4.EI capture
    5.Diuty Different at GR
    6.EI create/RG23D selection
    7.Update RG1 at MIGO
    I hope this will help you,
    Regards,
    Murali.

  • Error in allocating RG23D document number Interval not found Number object

    Dear
    Expert
    Error in allocating RG23D document number Interval not found Number object J_1IRG23D
    I tried the solution given in the forum but its not working,
    Pls help me out.
    Thanks and Regards
    Deepankar

    Hi,
    As a know that this is a problem of number range and I mentioned the same(SNUM> given the object and maintain the number range of this fiscal year but it didnt work also searched in the forum but didnt got any other solution so posted the issue.
    hope now its clear.
    Thanks and regards
    Deepankar

  • TDS Number range generation failure

    Hi all,
    We are using ECC 6 . when we are generating the TDS certificate than system prompting the message " Number range generation Failure"  Message no. 8I166.
    I have done all the configuration. last week we have already generated the certificate with 40000000 certificate no. but when I re test the same scenario this week than system prompt me this message.
    and I checked the Tcode J1INCT certificate number range. where I found that in status there should be 400000000. because we have already generated the certificate. but status was 0.
    please help me what could be the cause of this error.
    Points will be assigned.
    Regards to all.

    Hi,
    Go to the Following path and maintain the Number range:
    SPRO- Financial Accounting - FA Global Setting - WTH - Extended - Posting - India - WTH Tax Certificate for Vendor & Customers -1) Maintain Number Groups 2) Assign Numer Groups.3)Mainatin Number Ranges.
    Also goto SM30
    Maintain the following :
    J_1IEWT_CERT_N
    J_1IEWTNUMGR_1
    Hope its useful,
    Thanks
    Prasada

  • Error in allocating excise invoice

    When i do the billing using vf01, the billing document is displayed. On saving the billing document, i get the message " Print excise invoice in series group S2 using j1-ip for billing document" and a message at the bottom of the screen comes "excise document created for billing document". However when i try to post it to accounting, I get a message "express document" update was terminated"". On clicking the error, it shows " error in allocating excise invoice" and the attribute defined for it is "Express copy printing not allowed . Forwarding not allowed". How to resolve this problem? Please help
    Rohit Uniyal

    Hi Garima/Rohit,
    Please check in  Customizing, whether you have properly maintained the IMG activity Excise Group - Series Group Determination.
    Further,
    Check your Number Ranges for both
    Billing type F2 as well as for Excise Invoice Number range for all relevan objects.
    May be there is overlapping of Number Ranges Somewhere.
    Plz Check these settings.
    Reward if found useful.
    Regards,
    Gaurav Raghav.

  • Error in allocating Excise inv no Interval not found No object J_1IEXCLOC

    Hi, When I try to execute J1IV, I am getting the below error:
    Error in allocating Excise invoice number Interval not found Number object J_1IEXCLOC
    Message no. 8I336
    All number ranges are maintained for the above object. Please let me know, whether anyone encountered the same situation and how to resolve the same.
    Regards
    Suresh

    Hi,
    Please check in SNRO as you allocated no range for J_1IEXCLOC  object for your series group & check for J_1IARE3 object also for same series group.
    regards

  • Number range generation failure

    Dear Team,
    While creating 57F4 challan in J1IF01, we are getting followng error "number range generation failure". Kindly suggest why we are getting this error & also the solution.
    Regards,
    Sathya.

    I dont remember correctly but we have to assign a number range to the excise group which we use while creating 57F4 challan.
    check what exsice group / series group you are usiung ang check in customization whether numbner range has been assigneg to it.
    I remember that number range should be for particular excise group and fiscal year.
    check and confirm if your problem is solved.

  • Error BCOS088 "Error in local message system: Error while allocation..."

    Hello,
    I getting an error while creating a support message with "help->create support message".
    The message number is BCOS088 "Error in local message system: Error while allocation: Overwrite a protected Message xxx not create."
    I read a lot of threads about errors while creation of support message, but nothing helps.
    Here are the facts:
    - The error occurs on SolMan 4.0 system (sap basis rel. 7.0, SP15).
    - BCOS_CUST: OSS_MSG | W | NONE | CUST620 | 1.0
    - authorization trace without error
    - DNO_CUST04: NO_USER_CHECK = X
    So there is no authorization error, because of no RFC destination and successfully authorization trace.
    What could be the reason of this error?
    Thank you for answers, Tina

    Hi Tina,
    internal number range used for ABA Messages/Basis Notifications should match the external number range used for service desk messages.
    For ABA messages:
    Goto tx: DNO_CUST01 -> SLF1 -> Details
    Should show number range 01
    Number ranges for this object are defined via tx: DNO_NOTIF
    For Service Desk Messages (Support Message SLFN):
    Goto tx: SPRO -> "Check number range for Service Desk Message" -> SLFN -> Details
    Should show number range 01 internal, 02 external
    Number ranges for this object are defined via tx: CRMC_NR_RA_SERVICE
    Number range 01 (internal) of ABA message should match number range 02 (external) of Support Message.
    You may use other ranges but you should make sure they match.
    Hope this helps.

  • Number Range generation failure Message no. 8I166

    Dear All,
    While creating subcontracting challan ( T-CODE J1IF01 ), its giving error as Number Range generation failure
    Please help me out.
    Regards,
    Sandeep.

    The correct answer was copied from NUMBER RANGE GENERATION FAILURE That answer has been rejected and the points removed. Copying other people's work is not permitted.

  • Number Range generation failure in Form16A?

    Hi Experts,
    While executing Form16A ,i am getting the error
    "Number Range generation failure"
    Message no. 8I166
    Suggest the solution.
    Regards,
    Sumeya

    Hi,
    Please maintain the follwogin three steps in config.
    1. Assign form in SM30 - J_1IEWTCERT
        - Assign form for company code, section code, Tax code wise.
    2. Later Assign number ranges for the number range groups at
    Financial Accounting  --> Financial Accounting Global Settings --> Withholding Tax --> Extended Withholding Tax --> Postings --> India --> Withholding Tax Certificates for Vendors and Customers --> Assign Number Ranges to Number Groups
    3. Maintain Number Ranges
    Financial Accounting  --> Financial Accounting Global Settings --> Withholding Tax --> Extended Withholding Tax --> Postings --> India --> Withholding Tax Certificates for Vendors and Customers  --> Maintain Number Ranges
    This must help you out.
    Caio
    Raghu

  • Error in allocating a connection + JPA

    Hello Experts,
    I am trying my first ever JPA Program.I am using netbeans 6.0.In netbeans there is a sample application for WebJPA.In that they are calling entity from servlet.I just made a different project.I have copied all files in my project.At the time of creating persistence unit I have used DB2.But now when I am compiling my project I am getting the following errors.Seems there is some problem with connection to DB2.I have also added the correct jar files during creation of persistence unit.Please help me.Many Thanx in advance.
    *Deploying application in domain failed; Deployment Errorjava.sql.SQLException: Error in allocating a connection. Cause: Connection could not be allocated because: Failure in loading T2 native library db2jcct2, reason: java.lang.UnsatisfiedLinkError: no db2jcct2 in java.library.path --*
    Internal Exception: java.sql.SQLException: Error in allocating a connection. Cause: Connection could not be allocated because: Failure in loading T2 native library db2jcct2, reason: java.lang.UnsatisfiedLinkError: no db2jcct2 in java.library.path
    Error Code: 0
    Deployment error:
    The module has not been deployed.
    See the server log for details.
    at org.netbeans.modules.j2ee.deployment.devmodules.api.Deployment.deploy(Deployment.java:163)
    at org.netbeans.modules.j2ee.ant.Deploy.execute(Deploy.java:104)
    at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
    at sun.reflect.GeneratedMethodAccessor1068.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:105)
    at org.apache.tools.ant.Task.perform(Task.java:348)
    at org.apache.tools.ant.Target.execute(Target.java:357)
    at org.apache.tools.ant.Target.performTasks(Target.java:385)
    at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1329)
    at org.apache.tools.ant.Project.executeTarget(Project.java:1298)
    at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
    at org.apache.tools.ant.Project.executeTargets(Project.java:1181)
    at org.apache.tools.ant.module.bridge.impl.BridgeImpl.run(BridgeImpl.java:277)
    at org.apache.tools.ant.module.run.TargetExecutor.run(TargetExecutor.java:460)
    at org.netbeans.core.execution.RunClassThread.run(RunClassThread.java:151)
    Caused by: The module has not been deployed.
    at org.netbeans.modules.j2ee.deployment.devmodules.api.Deployment.deploy(Deployment.java:157)

    Hi garava,
    Thanks for the reply.I had followed the same path while creating Persistence Unit.I googled this error & I found a solution where I need to set the NativeLibraryPathPrefix in my JVM.
    For this I went to Servers->Glassfish V2 -> JVM-> .There I set NativeLibraryPathPrefix = D:\Program Files\IBM\SQLLIB\BIN.
    It's working now.But I can't understand what was the problem & how it got solved.
    One more issue ,suppose tom I am facing the same problem for some other XYZ database.Do I need to change this path again for that database.What this path exactly means.I read it looks for "db2jcc2.dll" in this path.What is the need of this dll if I am including jar files during creation of persistence Unit.
    Please help.Thanks in advance.

Maybe you are looking for