Error in ALPHA conversion while loading hierarchies

Hi,
I got the following error while loading hierarchies:
Error in ALPHA conversion in NodeId00000088 for InfoObject 0PROFIT_CTR
Message no. RH224
Diagnosis
The technical node name for node id 00000088 is not consistent for conversion exit ALPHA, which is stored with InfoObject 0PROFIT_CTR.
Possible reasons for the error:
The original consistent value returned by the DataSource was changed by a conversion routine to a non-consistent conversion exit value.
The DataSource returns a value that is not consistent in the conversion exit.
System response
Loading the hierarchy was terminated.
Procedure
Check whether the correct conversion exit was entered for the InfoObject. If necessary, change the conversion exit, conversion routine or the data to be extracted.
A further option is to activate automatic conversion in the transfer rules. Here, the system executes the conversion exit, making sure that the data is in the correct format.
If it is not hierarchies, we fix this error by prefixing the zeros (as we are working on Qbox we wont change the transfer rules to select the conversion routine) but here there is no PSA, the data is coming from ALE. Based on this please suggest me to how to fix this error?
Points will be given for any helpful suggestion

Ganesh,
Can you please check out the Alpha Conversion Routine and also nodeid for that infoobject..
There might be some inconsistencies in the code..
Hope it helps
Gattu

Similar Messages

Error while loading hierarchies

Dear all
I am faicng the following errors while loading hierarchies from R/3
1.Error"Error in the hierarchial structure"
When i open the logs i can see the follwing analysis,but not able to understand
Analysis
The node with the technical name 0000104 appears more than once under the node with the ID 10400011. A node must be hung only once under its direct predecessor (parent). The nodes with the same technical name have the IDs 10400017 and 10400012.
When one of the nodes is an interval, this means that the other node is contained in this interval. When both nodes are intervals, this means that both interlap.
Possible solution
Remove the Duplicate Nodes
Can anyone explain this please
2.Error: InfoObject ZH_LKSTOM is not available for Datasource ZH_LONKLA_HIER
I am trying to load the hierarchy for the Info object ZH_LONKLA
Can anyone kindly help me out in these
Regards
Veena.

1.Error"Error in the hierarchial structure"
the hierarchy does have duplicate values. the possibility is that you are loading a set from R/3, where the system allows to have duplicate values in different nodes, but that doesnt hold true in the case of BI. so ask ur functional folks to nake the set unique and the load should go fine.
.Error: InfoObject ZH_LKSTOM is not available for Datasource ZH_LONKLA_HIER
I am trying to load the hierarchy for the Info object ZH_LONKLA
Not sure whats the relation between ZH_LKSTOM and ZH_LONKLA

Error in ALPHA conversion

Hi experts,
I am loading a hierarchy for a infoobject. When I execute the infopackage, the monitor show me the next error: Error in ALPHA conversion in NodeId00000009 for Infoobjetc 0CUSTOMER. Can anybody hepl me?

Hi,
Go to the transfer rules and check the Conversion checkbox for the info-object 0CUSTOMER. Retry the load. Hopefully it should go through.
Bye
Dinesh

Assigning source system to info source while loading hierarchies

Can anyone tell me how to assign flat file source system to Infosource while loading hierarchies and plz send the step by step instructions for loading the hierarchies.
Thx in Advance.

Hierarchy Upload from Flat files
Hierarchy Upload from Flat files
Uploading Hierarchies from Flat Files
http://help.sap.com/saphelp_bw30b/helpdata/en/fa/e92637c2cbf357e10000009b38f936/content.htm
Thanks...
Shambhu

Error in Unit conversion while data loading

Hi,
I have maintained DSO in Material (0MATERIAL) info object > Bex tab > Base unit of measure > ZDSO; Then loaded this ZDSO from std data source 0MAT_UNIT_ATTR so that all conversion factors into different units which are maintained in material master data in ECC would get loaded to this DSO.
Then I have created one Conversion type (ZCON) to read source unit from record and convert it to fixed unit "ST" with reference info object as 0MATERIAL. ST is customized UOM here.
I am using ZCON conversion type to convert Qty in base UOM to Qty in ST in Bex reports under conversion tab of key figure. Now as this is std functionally, conversion would automatically takes place using ZDSO (mentioned above) as source and target UOM are not from same dimension (Base UOM is EA and target UOM is ST).
If conversion factor to ST is not found in ZDSO then conversion to base UOM would happen automatically. Now this functionality is happening perfectly in Bex but its giving error if I use the same conversion type ZCON while data loads. Its giving error for those material for which ST conversion is not maintained. But when its not maintained by default it should convert it to base UOM, but its not converting and giving error in data loads.
Hope I am able to explain the issue.
Please help me on on this issue or any way around.
Thanks in advance.
Prafulla

Ganesh,
Can you please check out the Alpha Conversion Routine and also nodeid for that infoobject..
There might be some inconsistencies in the code..
Hope it helps
Gattu

Error while loading hierarchies in sap bw

Hi All,
Iam getting the below error while loading hierarchy from flat file. While scheduling infopackage iam getting ....
Error 8 when compiling the upload program: row 657, message: A newer version of data type /BIC/B0014446000 was...
Can any one please resolve the issue....
Regards,
Kalyani

It wasn't any issue with Hierarchy load actually. He might have done some changes to the InfoSource and activated it. But some time you need to refresh the complete tree or run \nrsa1 to refresh the widow otherwise it gives error.
It shows to the system both the copies of the infosource new and the modified and so throws this error.
This is also the case in case of time stamp error, where you do some changes to DS again and the time stamp in system metadata
for this DS (re-activated) dosen't matches witht the one expected as it's creation time stamp preiously. So in this case also you need to re-activate and refresh/re-login into the system again.

"Error in data selection" while loading

hi,
while loading data from one ODS to another(datamart) I, after extraction of some data packages successfully I m getting an error:"Error in data selection"
i saw its help messages were
1)error 7 when sending an idoc
2)sql error in accessing table no 13
3)error in source system
in the source ods i have loaded thru init from R/3..
please help

Hi,
Take a look on the cosulting note : 610938.
In place of R/3 system you have to consider BW itself when you are reading the note.
With rgds,
Anil Kumar Sharma .P

Application document not posted: while loading hierarchies

Hi,
I am trying to load hierarchies for 0costcenter and 0material. I am getting the error '51 Application document not posted'. The load is successful for master data as wellas text data loads. The connections are fine and parter profiles too. Please let me know the step by step by procedure to solve this error.
Also let me know what can be possible reasons due to which this problem occurs.
Thnx in advance.....
and yes i do remember "thanx = Points" :):)

Check this if it helps:
Error in Data loading
Re: Problem with Info Idoc -- please suggest

Uknown Error in update rules while loading into InfoCube

I load data from BC 0FIAR_O03 ODS into BC 0FIAR_C03 ICube.
While loading I got error on second data package (1st package loading ok)
The error message in monitor informs about error in update rules.
I got nothing special than I looked into Application Logs (tcode SM21). It tells about message 560 with addition "no documentation exists for message 00560"...
I can't get what's wrong. The update rules for ICube is BC without any modifications and data loaded succefully into ODS.... Any ideas?? Where I can find more inforamtion about error occured during update??

update rule terminated if data load contains more than 1 data package. don't know why. I solved problem by spliting load process by Fiscal Year ranges

Invalid Number Error for Decimal Field While Loading Data

I am loading a delimited text file using the SQL* loader however I am reciving an error in my decimal fields. When a decimal field only has leading zeros before the decimal point I receive invalid number error. Below will clarify:
i.e.) 00000000.30 [*Invalid number*]
i.e.) 00046567.45 [*Valid number*]
i.e.) 00000001.00 [*Valid number*]
I've tried setting the precision/scale in the table, tried declaring it a decimal field instead of number, none of these methods fixed the issue. Any help I would really appreciate.
POLICY_NUMBER             NUMBER,
EFFECTIVE_DATE     DATE "YYYYMMDD"          NULLIF EFFECTIVE_DATE = '',
TRANSACTION_DATE     DATE "YYYYMMDD",
TRANSACTION_AMOUNT     DECIMAL EXTERNAL,   -- Tried TRANSACTION_AMOUNT DECIMAL EXTERNAL (10) & TRANSACTION_AMOUNT NUMBER
MF_TRX_CODE          NUMBER,
USER_ID          CHAR,
GROUP_NUMBER          NUMBER,
EXPIRATION_DATE     DATE "YYYYMMDD"          NULLIF EXPIRATION_DATE = '',
BILL_NUMBER          NUMBER,Any help is greatly appreciated. Thanks before hand.

Hi,
Connected to Oracle Database 10g Express Edition Release 10.2.0.1.0
Connected as hr
SQL> SELECT * FROM TEST;
TRANSACTION_AMOUNT
SQL> SELECT * FROM TEST;
TRANSACTION_AMOUNT
          11000,00
            293,37
           2000,00
           1134,32
              0,30
SQL>Between the selects I loaded the table with sql*loader using...
Load Data
INFILE *
APPEND
INTO TABLE TEST
FIELDS TERMINATED BY '|'
TRAILING NULLCOLS
TRANSACTION_AMOUNT     DECIMAL EXTERNAL
BEGINDATA
00011000.00
00000293.37
00002000.00
00001134.32
00000000.30The log is
SQL*Loader: Release 10.2.0.1.0 - Production on Tue Dec 23 17:23:47 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Control File:   test.ctl
Data File:      test.ctl
Bad File:     test.bad
Discard File: none specified
(Allow all discards)
Number to load: ALL
Number to skip: 0
Errors allowed: 50
Bind array:     64 rows, maximum of 256000 bytes
Continuation:    none specified
Path used:      Conventional
Table TEST, loaded from every logical record.
Insert option in effect for this table: APPEND
TRAILING NULLCOLS option in effect
   Column Name                  Position   Len Term Encl Datatype
TRANSACTION_AMOUNT                  FIRST     *   |       CHARACTER
Table TEST:
5 Rows successfully loaded.
0 Rows not loaded due to data errors.
0 Rows not loaded because all WHEN clauses were failed.
0 Rows not loaded because all fields were null.
Space allocated for bind array:                  16512 bytes(64 rows)
Read   buffer bytes: 1048576
Total logical records skipped:          0
Total logical records read:             5
Total logical records rejected:         0
Total logical records discarded:        0
Run began on Tue Dec 23 17:23:47 2008
Run ended on Tue Dec 23 17:23:50 2008
Elapsed time was:     00:00:02.86
CPU time was:         00:00:00.06Regards,

Error at DB commit while loading data in BW

Hi All,
When I try to load data in my BW Dev the request ( infoPackage or DTP) remains in yellow status for a while & then turns red. When I check SM21 I get the following error:
*Error 28 for write/read access to a file. File =
Error 28 for write/read access to a file. File = /usr/sap/BWD/SYS/global/100JOBLG/0001X13301905X73572
Error 28 for write/read access to a file. File = /usr/sap/BWD/SYS/global/100JOBLG/0001X13301906X65067
TemSe input/output to unopened file
Error at DB commit, return code 001024*
I understand this is a Basis problem. But can anyone suggest what should be done to resolve it?
Thanks,
Andy Kroos

Hi Andy,
This is a Basis issue so maybe you could create a thread for it on one of the Basis forums (unfortunately I don't have suffficent authorisations to move it for you)?
These SAP Notes should assist you:
11070 - Space requirements of TemSe and spooler
48400 - Reorganization of TemSe and Spool
16875 - TemSe objects do not match TemSe files
784969 - The RSBTCDEL2 program
214969 - Error writing the job log
Rgds,
Colum

Error in PDF Conversion while downloading file from application server

Hi,
I am facing a problem in which i have to download file from application server which is a PDF file (output of SAP Script). I am downloading this file using following code in BSP technology:
* event handler for data retrieval
EMPCD = REQUEST->GET_FORM_FIELD( 'emp' ).
MONTH = REQUEST->GET_FORM_FIELD( 'mn' ).
YEAR = REQUEST->GET_FORM_FIELD( 'yr' ).
W_IND = 'N' .
DATA : wa_zform16 type zform16.
DATA : file_path type string.
DATA : l_pdf_len type string.
DATA STR TYPE STRING.
DATA: OUTPUT    TYPE STRING ,
      L_XSTRING TYPE XSTRING ,
      APP_TYPE TYPE STRING.
DATA: PDF_TABLE TYPE RCL_BAG_TLINE.
DATA PHY_NAME_OUT     TYPE SAPB-SAPPFAD.
concatenate '/usr/sap/put/form16/' EMPCD '_' YEAR '.PDF' into file_path
*PHY_NAME_OUT = '/usr/sap/put/form16/01000200_2007.PDF'.
PHY_NAME_OUT = file_path.
OPEN DATASET PHY_NAME_OUT FOR INPUT IN TEXT MODE ENCODING default.
IF SY-SUBRC IS INITIAL.
DO.
    READ DATASET PHY_NAME_OUT INTO STR.
    IF SY-SUBRC IS INITIAL.
      CONCATENATE
          OUTPUT
          STR
          CL_ABAP_CHAR_UTILITIES=>CR_LF
      INTO OUTPUT.
    ELSE.
      EXIT.
    ENDIF.
ENDDO.
APP_TYPE = 'APPLICATION/PDF'.
CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
    EXPORTING
      TEXT     = OUTPUT
            MIMETYPE = 'APPLICATION/PDF'
*            MIMETYPE = 'APPLICATION/PDF;charset=utf-16le'
    IMPORTING
      BUFFER   = L_XSTRING.
CALL METHOD CL_BSP_UTILITY=>DOWNLOAD
    EXPORTING
      OBJECT_S            = L_XSTRING
      CONTENT_TYPE        = APP_TYPE
      CONTENT_DISPOSITION = 'attachment;filename=webforms.pdf'
      RESPONSE            = _M_RESPONSE
      NAVIGATION          = NAVIGATION.
Result of this code is : there is a pop up asking to open or save pdf format and process is complete, but i have problem in downloaded file.
At the time of creation i have put BMP image for signature in PDF file and it is working fine but when i upload that file in Application server and then download it with above used code it save the PDF file but when i open that file so whereever i have used signature that page gives error and could not display that scanned signature.
Can anyone please help me in this regard.
or is there any possibility from which i can download that file just like File transfer from BSP.
Keep in mind that i am using BSP technology so all GUI based function module to download file are not working.
waiting for your reply.....
Regards,
Gagan

Hi Raja,
I have standard sap form for TDS Certificate on which i have include an BMP image for digital signature and download that script into pdf format.While i download that PDF looks ok but it is not working in BSP.
Regards,
Gagan

Error in Service API while loading BI7.0 datasource objects

These are very simple HR master data text datasouce objects like 0EC_FREQU_TEXT and some custom datasources like ZAAPCAT_TEXT. We were able to load succesffully in DEV and Q. When trying to laod them in production using Process Chain, they failed with the following error message:
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
I tested the datasources in RSA3 and they give data. I also tiied manual loading, but was giving the same error message.
Can anybody give some pointers. I need this help by tomorrow morning.
Any help would be appreciated.
Regards
Raj

Re-triggering the load should work.
Take a look at these links/threads...
http://help.sap.com/saphelp_nw2004s/helpdata/en/44/bce6c181f456a1e10000000a1553f6/content.htm
service API in bi 7.0
Re: ALE

Error in Process Chain while loading Master data text?

Hello All
Having a Process chain and having 5 infopackages(Master data Attri & text)with FULL LOAD with an processing options as PSA and Infobject.In this one of the infopackage failed and the status is in red colour,and when I right clicked there is no repeat option?Now how to run this process?
Heard that v can restart the process in debug screen?can anyone let me know how to do this?
Many Thanks
balaji

Hi dear,
you don't find the repeat option because this is a full load...I think you can easily restart the entire PC (or loading directly the failed infopackage from RSA1), because full loads for master data don't cause any data duplication !
Hope it helps!
Bye,
Roberto

Getting Error in shuttle region while loading page.

Hi All,
I am developing shuttle region in a page which depends on selected values in the drop down list. i am getting all values for every value in the drop down list. but i want to get values in the Available list of shuttle region with respective value selected in drop down list.
Can any body send code for shuttle RN co?(in process request and process form request ) .
Thanks,
Mahesh.

In process form request :
/* user changed the option - capture the event */
if("optionChangeEvent".equals(pageContext.getParameter("event")))
pageContext.forwardImmediatelyToCurrentPage(null,false ,ADD_BREAD_CRUMB_NO);
In processRequest :
String selected = pageContext.getParameter("choice");
/* means some thing is selected */
if(selected != null)
test = Float.valueOf(selected);
OADefaultListBean list1 = (OADefaultListBean)webBean.findChildRecursive("list1");
list1.setListCacheEnabled(false);
OADefaultListBean list2 = (OADefaultListBean)webBean.findChildRecursive("list2");
list2.setListCacheEnabled(false);
/* bind the query parameter through AM*/
ShuttleAMImpl am = (ShuttleAMImpl)pageContext.getApplicationModule(webBean);
am.initFWK_TBX_PO_HEADERVO(test);
Regards,
Guru K

Error in ALPHA conversion while loading hierarchies

Similar Messages

Maybe you are looking for