Error in Analyse Tab

Hi
I have received following error after analyse tab from db13
SAPDBA: Error - in analyzing index SAPR3.DSYAD~0
        of table DSYAD!
30.12.06 09:50     ORA-08100: index is not valid - see trace file for
                   diagnostics
Please suggest a solution.
Regards
Pankaj

Pankaj
This Error is very strange error, Have a look on trace file which is generated at user_dump_dest and alert<sid>.log file.
Reasons may be index might be corrupted or invalidated.Or may be due to block corruption.And there are some bugs on specific platforms for this error.
Try to drop and recreate index and analyze or better contact customer support with trace file.
Regards
Vinod

Similar Messages

  • Error on Analysis tab in GRC 10 on NWBC

    Hi All,
    I am really new to the SAP environment and have been configuring it to run GRC, I have completed all the post installation tasks. So far I can log onto the system through NWBC and capture my Risks. However when I click on the analysis tab and select create analysis, it brings up the "create new analysis", and I leave the date valid default and click OK I get an error "Error when creating the case; check the Customizing activity". I have seached the forum for this error but nothing available. Any help will be appreciated.
    Regards
    Warren

    Hi Prasad,
    Sorry forgot to mention I am running SP5.
    Regards
    warren
    Edited by: wdmgreen on Nov 2, 2011 11:00 AM

  • In solman_workcenter - RCE- E2E analysis tabs change,trace is not appering

    Hi,
    Initisaled EHp1 and done initial and basic configuration using Transaction SOLMAN_SETUP successfully.
    SMD + wily installed succeesfully in satellite system system
    I can see the satellite system data in Introscope Webview
    Extractor Framework jobs are running fine.
    But In Solution manager, in transaction Solman_Workcenter->root cause analysis->E2E Analysis i am not getting  Workload Analysis, Change Analysis and exception analysis tabs.
    just i am getting systems in E2E analysis. why above tabs are not showing
    besides standard View there is no tabs.
    Regards,
    AR

    Hi Jagan,
    Now i am  able to see the worload,trace analysis tabs .. but under workload,trace analysis etc no data is showing.
    1) under workload analysis -> P07 Enterprise portal ->J2ee
    it's saying that no applicaqtion data found and for some tabs empty (just white) screen is showing and for some tabs it's
    2)under workload analysis -> P07 Enterprise portal ->Host
    giving Error loading template 0TPL_0SMD_MPEH_WA_Q0018_H for host tab
    I am able to see only one graph i.e under workload analysis -> overview.
    Best Regards,
    AR

  • Workload Analysis tab is missing  in E2E Anaysis

    Hi Guru,
    I am in process of generating EWA reports for portal ,below are the steps I have completed successfully.
    1. SMD agent installation on portal.
    2. Defined portal system in SMSY.
    3. completed SOLMAN_SETUP.
    4. Completed Setup Wizard for managed system.
    5. Deploy IS agent via SDM in Solman.
    6. Introscope agent setup done for managed system
    7. Managed system data is visible in IS Enterprise Manager.
    When I checked t code solman_workcenter->RCAtab-> E2E Anaysis->selected  the portal system i cant find Workload Analysis tab i.e Workload Analysis tab is missing could you please help me to resolve this issue.
    System Configuratoi: SAP EHP 1 for SAP Solution Manager 7.0 and portal is netweaver 7.0
    Thanks
    Abullais

    Hi,
    Kindly check security guide for RCA authorization,
    https://websmp102.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000718044&_SCENARIO=01100035870000000202
    It may be due to authorization issue.
    Regards,
    Karthik

  • Error during analysis of source code

    Hi,
    I am trying to add a field to the search criteria and i have followed the steps as given in the cook book. I am stuck at a point where on trying to add the custom field to the existing code i get an error message - "Error during analysis of Source code". This pop up comes at the end of the wizard.
    I also tried to create a new context node but at the end of the wizard i get the pop up and the same  message inside.
    I searched in SDN and found out that this error could occur if the context node class is not active. In my case, all the three classes : Controller , context and context node class are active.
    Could some one throw some light as to why this error message occurs?
    Regards,
    Venkat

    Hi Experts,
    I'm also getting a similar error but at the time of creating a new event. All the classes are active without errors.
    How do we resolve this.
    Appreciate your help.
    Regards,
    Sandeep

  • Technical Analysis TAB is not visible in PCUI

    Dear Forum,
    I have made all the settings for Technical Analysis TAB in
    T.Code: CRMC_Blueprint_c
    Application Element>TAB page Group>Tab Page Group Structure
    Tab Page Group  : CPL_ODP1
    Technical TAB is visible but when we click on this, No event is occuring.
    I am using CRMD_BUS2000120
    Testing in CRMC_PCUITOOLS
    Tab Page Group  settings : CPL_ODP1
    Seq.          Event                        Desc                                      View Switch
    1     CPY_ITM_1O                     Item Selection     
    3     CPL_GENERAL_DATA     General Data     
    5     CPL_HD_ITEM                     Products                   CPL_ITEM
    10     CPL_ITEMTREE                     Item Tree                   CPL_ITEM
    12     CPL_HD_DATES                     Dates     
    18     S1O_HD_PARTNER_ORG     Partner     
    40     CPL_HD_STATUS                     Status     
    45     ACI_H                                     Scheduled Actions     
    50     CPL_HD_TASK                     Tasks     
    60     CMG_TAB_DOCFLOW     Document Flow     
    61     CDH_ODC1_TAB                     Change History     
    65     S1O_HD_TREE_ANALYSIS     Overview                   S1O_HD_ANA
    66     S1O_HD_TREE_ANALYS_C     Reason for Complaint     S1O_HD_ANA
    67     S1O_HD_TREE_ANALYS_D     tbd                   S1O_HD_ANA
    68     S1O_HD_TREE_ANALYS_E     Cause                   S1O_HD_ANA
    69     S1O_HD_TREE_ANALYS_T     Corrective Measure     S1O_HD_ANA
    70     S1O_HD_TREE_ANALYS_W     Customer Request     S1O_HD_ANA
    71     CPL_BOSS_CREATE     Confirm                     S1O_HD_ANA
    Full points will be rewarded !!!.
    Regards,
    Nirav

    PLease check the Entries in Tab Groups as
    Tab group  CPL_ODC1
    CPY_ITM_1O
    CPL_HD_ITEM
    CPL_ITEMTREE
    CPL_HD_NOTES
    CPL_HD_DATES
    CPL_HD_SERVICE
    CPL_HD_PARTNER
    S1O_HD_TREE_ANALYSIS
    S1O_HD_TREE_ANALYS_C
    S1O_HD_TREE_ANALYS_D
    S1O_HD_TREE_ANALYS_E
    S1O_HD_TREE_ANALYS_T
    S1O_HD_TREE_ANALYS_W
    CPL_BOSS_CREATE
    BTX_PRICING_H
    CPL_HD_STATUS
    ACI_H
    CPL_HD_TASK
    CPL_HD_DOCUMENTS
    CMG_TAB_DOCFLOW
    CDH_ODC1_TAB
    Tab group CPL_ODC2
    CPL_NOTES
    CPL_IT_OBJECTLIST
    CPL_IT_DATES
    S1O_IT_COUNTER
    S1O_IT_TREE_ANALYSIS
    S1O_IT_TREE_ANALYS_C
    S1O_IT_TREE_ANALYS_D
    S1O_IT_TREE_ANALYS_E
    S1O_IT_TREE_ANALYS_T
    S1O_IT_TREE_ANALYS_W
    CPL_BOSS_CREATE_IT
    SRV_WARRANTY
    BTX_PRICING
    SLS_SCHEDULE
    BTX_CONFIG
    CPL_IT_CONTRACT
    CPL_IT_PARTNER
    CPL_IT_STATUS
    ACI_I
    CPL_IT_TASK
    CPL_IT_DOCUMENTS
    also check the entries in Application layout for your application as :-
    ACI_CONDPARAM_H
    ACI_CONDPARAM_I
    ACI_H
    ACI_H
    ACI_I
    ACI_I
    ACI_LONGTEXT_H
    ACI_LONGTEXT_I
    ACI_PRNTPREV_H
    ACI_PRNTPREV_I
    ACI_PROCLOG_H
    ACI_PROCLOG_I
    ACI_PROCPARAM_H
    ACI_PROCPARAM_I
    ACI_STARTCOND_EXT_H
    ACI_STARTCOND_EXT_I
    ACI_STARTCOND_H
    ACI_STARTCOND_I
    ACTIONS
    ALL_CHANGES
    BTX_CONFIG
    BTX_IT_DOCFLOW
    BTX_MAIL_POPUP
    BTX_PRICING
    BTX_PRICING_H
    BUS_EVENTS
    CDH_ODC1_TAB
    CDH_ODC1_TAB
    CDH_ODC2_TAB
    CHANGE_DOC
    CMG_CHOOSE_MODELNODE
    CMG_TAB_DOCFLOW
    CMG_TAB_DOCFLOW
    CMT_DOC_TEMPL_CREATE
    CMT_TEMPLATE_CREATE
    CMT_WHERE_USED
    COM_ADDRSEL_TAB
    COM_ADDRSEL_TAB_ITEM
    COM_PARTNERSEL_TAB
    COM_TERRITORY_TAB
    CPL_ADVANCED_01
    CPL_ADVANCED_05
    CPL_BOSS_CREATE
    CPL_BOSS_CREATE_IT
    CPL_HD_DATES
    CPL_HD_DOCUMENTS
    CPL_HD_FU_ACTION
    CPL_HD_FU_ACTION
    CPL_HD_ITEM
    CPL_HD_ITEM
    CPL_HD_NOTES
    CPL_HD_PARTNER
    CPL_HD_PARTNER
    CPL_HD_SERVICE
    CPL_HD_STATUS
    CPL_HD_TASK
    CPL_ITEMTREE
    CPL_IT_CONTRACT
    CPL_IT_DATES
    CPL_IT_DOCUMENTS
    CPL_IT_OBJECTFORM
    CPL_IT_OBJECTLIST
    CPL_IT_PARTNER
    CPL_IT_PARTNER
    CPL_IT_STATUS
    CPL_IT_TASK
    CPL_NOTES
    CPY_ITM_1O
    CREATE_FOLLOWUP
    CREATE_FOLLOWUP
    CREATE_FOLLOWUP
    CREATE_WORD_DOC
    DIS_CHANNEL_SELECT
    INIT
    INIT
    INIT
    INIT
    ORGUNIT_SELECT
    PCF_SEARCH_ARCHIVE
    PRD_SELECTION
    PRINT
    S1O_HD_TREE_ANALYSIS
    S1O_HD_TREE_ANALYS_C
    S1O_HD_TREE_ANALYS_D
    S1O_HD_TREE_ANALYS_E
    S1O_HD_TREE_ANALYS_T
    S1O_HD_TREE_ANALYS_W
    S1O_IT_COUNTER
    S1O_IT_TREE_ANALYSIS
    S1O_IT_TREE_ANALYS_C
    S1O_IT_TREE_ANALYS_D
    S1O_IT_TREE_ANALYS_E
    S1O_IT_TREE_ANALYS_T
    S1O_IT_TREE_ANALYS_W
    SEARCH_ARC_PARTPROD
    SLS_SCHEDULE
    SRV_CONTRACT_SELECT
    SRV_IT_WARRANTY
    SRV_IT_WARRANTY_LOG
    SRV_WARRANTY
    SRV_WARRANTY_SELECT
    STATUS_CHANGE
    do you have the same Entries there ?
    Regards!!

  • Error viewing variables tab after running edit UI

    Hi,
    I have a problem that seems to be somewhat like this:
    http://forums.ni.com/t5/NI-TestStand/Error-viewing-variables-tab-in-Runtime-Operator-Interface/m-p/1...
    The VI I am trying to run is an edit substep of a step type. LabVIEW checks to see if the "Step.Setup.ReadMeasName" property exists, populates a listbox with it if it does. Another listbox with all the available measurement names also appears on the UI. The user has an Add and Remove button to remove measurements from the "ReadMeas" listbox or add them to it from the "MeasNames" listbox. Multiple names can be added/removed at once depending on whats selected when the buttons are pressed. Once "Done" is clicked the VI writes the"ItemNames" property of the "ReadMeas" listbox to "Step.Setup.ReadMeasName", using a Set Property Value node which is passed the TestStand Sequence Context. If the property doesn't exist it creates it.
    The only time I have any problem is when I try to remove items from the property after it is already initialized (i.e. not empty). In other words, if I run the VI from teststand, put several measurement names into "ReadMeas" click done, run the VI again (the names already added appear in the box when the UI comes up, LabVIEW reads "Step.Setup.ReadMeasName" ), and then remove some of the names. IF I had "ThisContext.Step.Setup.ReadMeasNames" opened in the step "Variables" tab when trying to remove the names this message appears in the Variables tab: "One or more errors have occurred. Please Save your work and restart the application." If I make sure not to have "ThisContext" expaded in the variables tab, but check the property before and after removing names from the list it does work properly and there is no error.
    This isn't a big deal becuase I doubt the end-user will be checking to see that the property actually got populated, but I still would like to fix the bug if possible. I've installed the patch for TestStand 2010, and the .Net framwork 4.0. Anyone have any idea what could be going on here?
    Thanks,
    -Josh
    Solved!
    Go to Solution.

    Josh -
    It looks like you're running into a Known Issue 193751, which is documented in the TestStand 2010 and 2010 SP1 Known Issues List. This is an issue that we intend to fix in a future version of TestStand.
    I hope this helps and am sorry for any inconvenience this issue may be causing you.
    Manooch H.
    National Instruments

  • Error formatting Cross-Tab table

    Hello!
    My CR2008 reports include many cross-tab tables and till now, everything went smoothly.
    ...till I got the message "Error formatting Cross-Tab table" while viewing the print preview.
    Technically the error comes up while clicking one of the groups itemized on the left.
    The database hasn't changed. Besides it happened with two different reports associated with two different data bases.
    Any idea ?
    Any help would be appreciated as I've been lost for a while.
    Thib'

    Before I received your answer (thanks a million by the way), I have been installing/un-installing subreports in the main report 'til the 'Error formatting Cross-Tab table' stops.
    The Error stopped occurring when I added a small Group Footer in the subreport : apparently the Error had begun when I had put it to a zero-height.
    Having said that, an hour later and many changes here and there, I have just put a zero-height again and no Error anymore...
    > Check in the main report design tab to see if the width of the subreport fits within the page of the main report.
    > If it doesn't try shrinking the subreport to fit.
    Within 'an hour later and many changes here and there', I did the opposite : I widened a subreport which did not fit in the main report. And the Error isn't raised anymore.
    > What happens if you drill into the subreport?
    You mean if I double-click the subreport to edit it ?
    If that is your question, no Error has ever been raised in the subreport : always in the Preview tab of the Main Report.
    Sorry for describing such an irrational behavior.
    I will categorize my question as answered but if you have any idea, I'd be delighted : I feel like this can happen again and I'd be less under stress to know what detail/ 'parameter' makes CR raise this Error. But your hint about the subreport fitting or not within the main report might be a clue.
    Thank you again
    Thib'

  • Receiving an 'Error formatting cross-tab object' error when paging through preview

    I have a report with two subreports in the group footer.  One of the subreports contains a cross-tab report.  When I preview the report as a whole, occasionally I get an error formatting cross-tab object and then no more pages of the report are displayed.  If instead I choose to export the report to pdf, Crystal Reports crashes.  Any ideas on what might be causing these problems?

    Actually, you can search for them by entering the KBA number in the search box in the top right  corner of this web page. KBA 1214209 comes up fine. KBA 1212875 does not, but it's not really applicable.
    While we are at the search box, see if a search term like 'crystal cross tab' (or something like that) bring up other KBAs.
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
      Follow us on Twitter

  • Analysis tab in complaint

    Hi all,
    In CRMD_order for complaint, there is analysis tab in transaction data as well as at item level.
    where as in webui, am not able to find out that tab. even when i went to the personalize;;; its missing there.
    Is there any way to keep that tab in complaint transaction in webui. please guide me.
    Thanks,
    Priya

    Deepak,
    I already did that . and naylis tab is called as categorization in webui but for item level we dont have such kind of thing.
    Usually in crmd_order for item level also we will have all the tabs almost as that of header but they are missing. in which component and view , we can see those details.
    Thanks,
    Priya

  • Analysis tab in item details of transaction WTY

    Hi All,
           We get pricing procedure details when we click on the analysis tab in the item details subscreen in WTY.We get the condition types and the associated movement of data.
    We have added a custom field to the communication strucuture KOMK,KONP,KOMG, and the same is present in the database table PVWTY. The same is present in the structure A997 also. If we see the technical details then the fields which are of concern to us are KOMK-(custom fieldname )  and A997-( custom fieldname ).But we are getting a warning symbol in the description part when we click on the condition type PRP4.
    I am not sure whether this is related to any missed out coding.I checked out that the routine 597 is assigned for the condition type PRP4.But the source code inside is the standard code and i am not sure how to include my custom field data here.Do i have to move this data through some exit or is this related to any configuration in SPRO...
    I am not able to figure out where and how i am supposed to move the data between the two structures as explained above. Hope that the above explanation gives an OK picture of what i need to achieve. Please help.
    thanks
    Nishanth

    Hi,
    You can try making the Date Field in Item Details  and Requisitioner as Mandatory if it serves your purpose for the situation - I .
    Please check the following :
    SPRO>IMG>MM>Purchasing>Purchase Requisition>
    Click on Define Screen Layout at Document Level
    Highlight the Document Type
    Go to Details and click on Deadline Monitoring
    Check the Date as Required Entry for Requisition, Delivery & Release Date.
    ( The user will need to Enter Release Date Manually)
    Similarly this can be maintained for RFQ and PO as well.
    This will give you the Tracking of the Processing Time with respective dates.
    Hope this helps,
    Best regards
    Amit Bakshi.

  • Error in Analysis Process Designer

    Hi Friends,
        I am trying to create an Analysis Process Designer, in that input is nothing but a Query which is built using Cell Editor, (as cell level Logic is different for the Query), now while assigning that Query to DSO in APD it is showing following error,
    The technical field name KYF_0001 for field XXXXXXXXXXXXXXXXXX may only appear once per input or output structure
    where is the problem exactly?
    Thanks in advanced.
    Regards,
    Rajdeep.

    Hi Rajdeep,
    The KF of the Query is not mapped properly to the DSO KF.SAme Tech nname of the query has been mapped multiple times.
    Do this
    1)When u go to mapping in APD u have to map the DSO and the Query,so suppose u have map Quantity of Query to Quantity of DSO.
    2)Go to the Query and in the properties of the KF in the Advanced Tab u will having the TECH Name of the KF
    3)Map the right KF with DSO and Query
    Get bak for any issues !!!!!!
    rgds
    SVU123

  • Error on miscellaneous tab in Role Expert (a web dynpro application)

    Hi,
    When i click on Miscellaneous option within configuration tab in role expert. Page is not getting displayed, error is "The page cannot be found".
    I am attaching the print screen also.
    Please suggest the solution for it.
    Thanks in Advance.
    Regards,
    Pravin
    The page cannot be found
    The page you are looking for might have been removed, had its name changed, or is temporarily unavailable.
    Please try the following:
    If you typed the page address in the Address bar, make sure that it is spelled correctly.
    Open the sapfapci.eame.syngenta.org:51700 home page, and then look for links to the information you want.
    Click the Back button to try another link.
    Click Search to look for information on the Internet.
    HTTP 404 - File not found
    Internet Explorer

    Can you please tell us what files were missing. We are facing the same issue during our upgrade. Misc page cannot be found error.

  • File open error under document tab in tcode BP

    Hi expert
    In a report, I am reading path ,file type ,name from a text file from the presentation server. The file gives all the information related to the file uploaded on application server. File can be of any type like cfg ,doc txt, bmp .
    I have to read and link the file under document tab in BP code I am able to link but not able to open the file from the link another text format is giving dump error saying format not supporting.
    I am reading and linking in binary mode because i do not have another option as we can read the file in text and binary mode only.
    Please suggest any solution for this .
    Point will be rewarded for this.
    Prem.
    Edited by: Prem Kumar on Jan 12, 2009 2:39 PM
    Edited by: Prem Kumar on Jan 12, 2009 2:40 PM

    HI,
      Just try it simply as below.
    the possible reasons could be.
    1) file with that name is not existing in that path
    2) path name is wrong (u gave it as c:/ give it as c:\)
    3) file may be open..
    how ever just try with giving the file path and the output table and see how it works
    *-- Read the File From PC
      CALL FUNCTION 'GUI_UPLOAD'
        EXPORTING
          FILENAME = V_FILENAME
        TABLES
          DATA_TAB = I_FILE
        EXCEPTIONS
          OTHERS   = 17.
    Thanks
    mahesh

  • # Multivalue error in cross tab

    Hi All,
    I am using BO-launch pad 4.1,sp2 Data is from Bex-query using CMC.
    Table: Cross tab
    1)Dimenssion obj: CO-object
    2)Attributs: Co-obj-wbs elemt,costcentr,order
    3)Measure:Budjet aproval overall, Budjet for annul,Actual cost, Actual quantity,planned cost, planned quantity
    when drag i dimension co-obj,attributes and all measures it showing values but when i drag attributes and measures (No need to drag dimension) it is showing in crosstab
    # Multivalues error in all measure fields.
    Can you plz give me suggestions on this.
    Thanks
    Ganesh

    Hello,
    Please check if you have used exception aggregation on measures in the BEx queries. These aggregation might be using some dimensions as reference characteristics. And if that dimensions are not included, you might get these multivalue error.
    Good Day !!

Maybe you are looking for