Error in Application because of missing right in LV-Link
hello,
I´am trying to build a application from my program. i use labview 2010 and LV-Link. when i start the applicationbuilder i get the error 8 by copy in AB_Engine_Copy_Error_Files.vi->AB_Application.lvclass:Copy_Error_Files.vi->AB_Application.lvclass:Copy_Files.vi->AB_EXE.lvclass:Copy_Files.vi->AB_Build.lvclass:Build.vi->AB_Application.lvclass:Build.vi->AB_EXE.lvclass:Build.vi->AB_Build.lvclass:Build_from_Wizard.vi->AB_UI_Frmwk_Build.lvclass:Build.vi->AB_UI_FRAMEWORK.vi->AB_Create_Build_Application.vi->EBUIP_Global_OnCommand.vi->EBUIP_Global_OnCommand.vi.ProxyCaller
Maybe you did have the rights for that
NI-488: DMA-hardwareerror
I don´t know why i dont have the rights to use the LV-Link like i want or what i can do to get the right for that.
Thanks
Erhard
Hey Andrea,
Thanks your both Tips help me. But i have a new problem I´am using LV-Link in my program. after i installed my program on a pc, the program is looking for a ddl of the lvlink but i tryed do link it in the installer but i can´t find lv-link there... Should i zip my installer+ the lvlink for the users or is there a other way to link the ddl with the application. I hope i explain it in a way that somebody can understand the problem .
Regards
Erhard
Similar Messages
-
Error: Partner application configuration is missing ... on SSO login page
We have APEX 3.1.2 setup as a partner application and an application within APEX setup to use SSO for authentication. Going to the APEX application redirects to the Single Sign-On page, as it should, but it also shows "Error: The partner application configuration is missing or expired." I type in my password and username, click the Login button, and (if I entered my username and password correctly), it redirects me to the APEX application just like it should. So, I cannot figure out why we're getting the no_papp_err error and I have not found any solutions to that issue on metalink or anywhere else on the Internet. Any ideas?
We're on Oracle Portal 10.1.4, SSO 10.1.2, and SSL is setup for both.
+Closing this topic and opening it in [Oracle Application Server - General|http://forums.oracle.com/forums/thread.jspa?threadID=832022&tstart=0|New Topic]+
Edited by: oportalist on Nov 28, 2008 10:24 AMDid you try checking the partner application entries on the SSO-login server page?
please login as orcladmin or some other user with membership in, i beleive, iasadmins group. verify that for this partner application, what you see here corresponds to the application URL. it looks like your login page call may have issues. so check for login url too.
also check the ORASSO.WWSSO_LS_CONFIGURATION_INFO$ for entries corresponding to Apex application. -
Error in BP because of missing country
Hi Gurus!!! first of all merry xmast!!!
I need you help since I cannot see where the error is. I am using CRM 7.0 and in the UI when saving a transaction I get the following errors "The region 00 is not defined for country" and "The country is not set". I have made the following verifications:
UI
--> Assingment Block: Parties involved I have checked that both the customer and employee responsible have the country and region
--> The transaction type used does not have the field "country".
GUI
--> PPOMA_CRM: I checked that the organization has the country set.
-->BP :I double checked that the BPs customer and employee responsible have the country and region assigned.
What`s wear is that I seem to be the only one who has this error so I`m reallly confused on how to solve it.
Please help me,
Thanks a lot!!!
Regards,
Lorena.Check all business partners used in that transaction and also all organizational units (sales organization, sales office, sales group). I would say that on one of this you have wrong country code defined in master data.
Regards. -
Error "Conflicting applications"
when tried to open browser it shows
conflicting applications
show items?
Moderator's notes: The post was edited. A more appropriate subject is provided.Hi atul0007
Thank you for posting and welcome to Nokia Support Discussions!
According to VigneshChennai he found a solution regarding Error "Conflicting applications", you might want to check this link: http://discussions.nokia.com/t5/Phone-Applications/nokia-asha-302-nokia-browser-quot-conflicting-app...
If my post helped you, please don't forget to click on the "White Star" and if it resolved your issue click on "Accept as Solution" -
i just tried to install the 11.4 update (or whichever one is the most recent update as of 1/26/2014) and when it failed i tried to install manually and now whenever i try to use it, i get the following error: "The application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem." Right after i click ok i then get this error: "Itunes was not installed correctly. Please reinstall Itunes. Error 7 (Windows error 126)." I tried to uninstall Itunes and then reinstall the 11.03 version but that didnt work either. I want to know if i copy all of the music in my itunes folder to an external without consolidating can i still transfer all my itunes music from my current windows xp pc to a brand new one and have my current itunes library in my new pc? Basically i just want to know 3 things: What exactly does consolidating the itunes library do? Can i copy, paste, and transfer my itunes library to an external and from there to a new pc? Will i be able to transfer my itunes library without consolidating the files?
I have found a temporary solution, allowing the previous version of iTunes (v. 11.1.3 (x64) in my case) to be re-installed. It will allow you to re-establish use of iTunes until the Apple software engineers fix the most recent disasterous upgrade (v. 11.1.4). Please see and follow the procedure in the following article:http://smallbusiness.chron.com/reverting-previous-version-itunes-32590.html The previous version works beautifully.
-
Missing right parenthesis error when querying using a list of values
Would anyone know why this statement gives the ORA-00907: missing right parenthesis error..?
SELECT FIELD_X
FROM TABLE_Y
WHERE FIELD_X IN (
'AJD'
'RED'
'ADF'
'MOI'
The reason why I wanted the AJD, RED, ADF, etc values on top of each other is because I need to add the single quotes around those terms in Excel before pasting them into the SQL statement (there are actually over 400 terms so above just shows a subset)Fortunately the SQL syntax is documented in the SQL manual
{ expr [, expr ]...
| ( [expr [, expr ]] ...)
}http://download.oracle.com/docs/cd/E11882_01/server.112/e10592/expressions015.htm#i1033664
Note the comma following each value in the syntax diagram and examples. -
FOR UPDATE on scrollable cursor and error: ORA-00907: missing right parenthesis
If change my query to have a FOR UPDATE and make it an updatable scrollable cursor I get an error on the updateRow() command saying "ORA-00907: missing right parenthesis"
If I remove the FOR UPDATE it works OK.
The problem I have is trying to update a CLOB from a ResultSet. If I do not upate any other column I get the error saying that the error"
"ORA-22920: row containing the LOB value is not locked"
I can get around this by adding FOR UPDATE. But if I add FOR UPDATE and try to update any non-CLOB column I get the 00907 error above.
Hmmmm. So here is what I can and cannot do:
- I CAN update the CLOB IF I update another column 1st and NO FOR UPDATE clause.
- I CAN update the CLOB only if I have FOR UPDATE clause.
- I CANNOT update just the CLOB without FOR UPDATE.
- I CANNOT update any non-CLOB column with FOR UPDATE.
What a pain in the ***! How am I to provide generic access to the applications being built on my DB layer. This is crazy!<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Andrew Edgar ([email protected]):
I have this same problem!
The error occurs when performing updateRow.
The turning off of auto commit only gets the query to work but not the actual update.
Will this be fixed in the next version of the Driver?<HR></BLOCKQUOTE>
Here is the stack Trace I recieved:
java.sql.SQLException: ORA-00907: missing right parenthesis
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:168)
at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:208)
at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:543)
at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1405)
at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:822)
at oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.java:1446)
at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java:1371)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1900)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:363)
at oracle.jdbc.driver.UpdatableResultSet.execute_updateRow(UpdatableResultSet.java:2135)
at oracle.jdbc.driver.UpdatableResultSet.updateRow(UpdatableResultSet.java:1322) -
Air App for Android - error 301: application descriptor missing
Greetings!
I've been building in Flash for a while but am brand new to mobile development. I'm currently trying to create my first Android app, a very basic game called "302 Saves The Galaxy". I don't intend to sell the game. I'm really just trying to learn my way through the publication process for future projects.
I've been able to get to the very last step in creating the apk file and I'm getting this error from the command-line process -
"Error 301: Application descriptor missing/cannot be opened"
Here's a screen shot of the command line window -
Here are a few other details about my process -
In Flash, I selected to publish to Air 2.0 because that's the only option I had (ie, no Air 2.5 option)
I've triple-checked and all spellings seem to be correct in my command-line syntax
I'm sure I'm missing something obvoius here. Any suggestions?
Thanks in advance!
JoelHi, Pahup!
Thank you SO MUCH for that tip! That solved the problem! Like I said, I knew it must be something pitifully easy that I was overlooking.
Anyway, I really appreciate your taking the time to respond.
Joel -
Error message ORA-0097 missing right parenthesis
Dear all;
Please what is wrong with this particular code because I keep getting the error message ORA-0097: missing right parenthesis
pl/sql: sql statement ignored. Thank you
spectification of package
create or replace package NEW_INFORMATION is
function get_total return number;
procedure daily_tasks;
function display_type_id return varchar2;
end NEW_INFORMATION ;body of package
create or replace package body NEW_INFORMATION is
function get_total return number is
oput number(10);
begin
select count(unique (p1.p_id)) into oput
from table_one p1 where p1.p_id in
('CYY','AIR, '');
return oput;
end;
function display_type_id return varchar2 is
used_cells varchar2(30);
begin
select unique(p1.p_id) as cells into used_cells
from part p1 where p1.pl_id in
('CYY','AIR', '');
return used_cells;
end;
procedure daily_tasks is
name_id varchar2(20);
temp_num number(6,2);
production_daystotal number(6,2);
result_first_cc_A number (7,2);
begin
name_id := display_type_id (); -- used to call the function
temp_num := get_total(); --used to call the function
select name_id, trunc(first_partcal_A.initial_cc_A / temp_num over()) +
case
when mod(first_partcal_A.initial_cc_A,temp_num over()) >= row_number() over(order by name_id) then 1
else 0
end
from
select round(total_as.t_as/prodmonths.proddaysinmonth) as inital_cc_A
from
(select count(*) as t_as from table_one p1 where p1.a_code = 'A') total_as,
(select count(*) as proddaysinmonth from
(select mon_dt + level - 1 as dt, to_char(mon_dt + level - 1, 'DY', 'NLS_DATE_LANGUAGE = ENGLISH') as dy_days from
((select trunc(to_date(m || '/' || a, 'MM/YYYY'), 'MM') as mon_dt
from
(select to_char(sysdate, 'MM') as m,
to_char(sysdate, 'YYYY') as a from dual)))
connect by mon_dt + level - 1 <= last_day(mon_dt))
where dy_days in ('MON', 'TUE', 'WED', 'THU'))prodmonths) first_partcal_A;
order by name_id;
end daily_tasks;
end NEW_INFORMATIONPls try this
CREATE OR REPLACE PACKAGE BODY new_information
IS
FUNCTION get_total
RETURN NUMBER
IS
oput NUMBER (10);
BEGIN
SELECT COUNT (UNIQUE (p1.p_id))
INTO oput
FROM table_one p1
WHERE p1.p_id IN ('CYY', 'AIR', '');
RETURN oput;
END;
FUNCTION display_type_id
RETURN VARCHAR2
IS
used_cells VARCHAR2 (30);
BEGIN
SELECT UNIQUE (p1.p_id) AS cells
INTO used_cells
FROM part p1
WHERE p1.pl_id IN ('CYY', 'AIR', '');
RETURN used_cells;
END;
PROCEDURE daily_tasks
IS
name_id VARCHAR2 (20);
temp_num NUMBER (6, 2);
production_daystotal NUMBER (6, 2);
result_first_cc_a NUMBER (7, 2);
BEGIN
name_id := display_type_id (); -- used to call the function
temp_num := get_total (); --used to call the function
SELECT name_id,
TRUNC (first_partcal_a.initial_cc_a / temp_num /*over()*/)
+ CASE
WHEN MOD (first_partcal_a.initial_cc_a, temp_num) >=
ROW_NUMBER () OVER (ORDER BY name_id)
THEN 1
ELSE 0
END
INTO name_id,
temp_num
FROM (SELECT ROUND (total_as.t_as / prodmonths.proddaysinmonth
) AS inital_cc_a
FROM (SELECT COUNT (*) AS t_as
FROM table_one p1
WHERE p1.a_code = 'A') total_as,
(SELECT COUNT (*) AS proddaysinmonth
FROM (SELECT mon_dt + LEVEL - 1 AS dt,
TO_CHAR
(mon_dt + LEVEL - 1,
'DY',
'NLS_DATE_LANGUAGE = ENGLISH'
) AS dy_days
FROM ((SELECT TRUNC
(TO_DATE (m || '/' || a,
'MM/YYYY'
'MM'
) AS mon_dt
FROM (SELECT TO_CHAR
(SYSDATE,
'MM'
) AS m,
TO_CHAR
(SYSDATE,
'YYYY'
) AS a
FROM DUAL)))
CONNECT BY mon_dt + LEVEL - 1 <=
LAST_DAY (mon_dt))
WHERE dy_days IN ('MON', 'TUE', 'WED', 'THU')) prodmonths) first_partcal_a
ORDER BY name_id;
END daily_tasks;
END new_information;i have added INTO clause
and removed over() after MOD and TRUNC -
I get the error message 'you can't open the application because the Classic environment is no longer supported', when will this issue be fixed? I need to use a program to analyse videos called 'J watcher' that is vital for my thesis. It worked in the last operating system but refuses to open in this one. When will this issue be fixed/what can I do about it?
Is there any way to fix this?
Yes, but it's not easy.
I've only tested this on Snow Leopard, but I think it will work in Lion. You need to have Java installed, which it's not by default in Lion. Since I'm not using Lion myself, I can't tell you how to do that.
Download the Java/Mac version (1.0) of the application from JWatcher Downloads. You'll get a zip archive. Expand it. Now you have an application called "JWatcher_V1.0." This is only the installer. It won't run, because it has PowerPC-only version of the Java application stub.
Select the line of text below in your browser and copy it to the clipboard:
/System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/MacOS
In the Finder, select Go > Go to Folder... from the menu bar (this menu may be slightly different in Lion.) Paste the clipboard contents into the text box. You should now see a folder with two files in it, one of which is named "JavaApplicationStub." Leave that window open.
Now right-click on the icon of JWatcher_V1.0 and select "Show Package Contents" from the contextual menu. A new Finder window opens. Open the folder called "MacOS". Inside that folder is a file also named "JWatcher_V1.0". Move it to the Trash. Drag the file JavaApplicationStub to where it was. Rename the file (it will be copied, not moved) JWatcher_V1.0. Close the Finder window.
Now double-click the installer. It should launch. Install the application wherever you choose. You're not done yet.
The installer creates a folder named, once again, "JWatcher_V1.0". Inside it is an application. That, too, is named "JWatcher_V1.0". Select it, and do exactly the same thing you did before with the installer: replace the binary inside with a copy of JavaApplicationStub.
You should now be able to run it. -
Partner application configuration is missing error on SSO login page
We have APEX 3.1.2 setup as a partner application and an application within APEX setup to use SSO for authentication. Following a link to the APEX application redirects to the Single Sign-On page, as it should, but it also shows "Error: The partner application configuration is missing or expired." I type in my password and username, click the Login button, and (if I entered my username and password correctly, of course!) then the APEX application is shown. So, I cannot figure out why we're getting the no_papp_err error and I have not found any solutions to that issue on Metalink or anywhere else on the Internet. Any ideas? I'm concerned that we have a misconfiguration somewhere that is causing this error and will affect any other partner application we setup in the future.
We're on Oracle Portal 10.1.4, SSO 10.1.2, and SSL is setup on both infra and mid tiers.Did you try checking the partner application entries on the SSO-login server page?
please login as orcladmin or some other user with membership in, i beleive, iasadmins group. verify that for this partner application, what you see here corresponds to the application URL. it looks like your login page call may have issues. so check for login url too.
also check the ORASSO.WWSSO_LS_CONFIGURATION_INFO$ for entries corresponding to Apex application. -
Using Rollup to get subtotals and grand total - missing right pren error
Hello,
I am trying to create sub totals by person_id and a grand total row in my APEX report but I get a "missing right pren error." I finally figure out that I need to eliminate column alias names to fix this problem, however, I now get an ambigous column reference. I am making this change in my main SQL report statement, however, I was wondering if I should be using the "group by Rollup" somewhere else while using "Break Formatting."
I would appreciate any help.
Thanks
lehCan you post the Query please?
-
Using Windows Vista-32. Installed CS4 suite & used Photoshop and other components but randomly one day it stopped working. Clicked to open and received error, "Some of the application components are missing from the application directory, Please reinstall the application."
I uninstalled & reinstalled entire Suite and just Photoshop several times with no success. When I reinstall, I receive error message,
Adobe Photoshop CS4 English Language Pack
Error:
Error 2.
LangPack (English) for DeviceCentral
Error:
Error2.
Solutions I have used include:
- replacing System Color Profile library by creating a different folder on desktop...
- replacing Backup Key for Adobe CS4
- Administrators & System are listed & permissions for security are set to Full Control
PLEASE HELP! I have assignment Due Tomorrow & Can't Access Software I PAYED Big $$$$ FOR!
Phone support won't help w/o paying a fee???You've done something to your system, or it's possibly gotten a malware infection.
You can't even reinstall Photoshop? Have you tried completely removing it, including running the Creative Suite Removal script?
How recently did it work? Have you tried System Restore?
-Noel -
I own an iMac 2011. I am unable to reinstall and launch premiere pro cc. We I attempt to run the program I get a error message saying that the adobe application manager is missing or need to be updated. I reinstalled the manager but I am still unable to launch any of my programs from adobe. I tried to do a trail with a program and I am still getting the same message.
Davinci thank you for the update.
Please utilize any available uninstallers that are located in the Applications/Utilities/Adobe Installers folder. Once all of the available uninstallers have been run you will then want to rerun the CC Cleaner Tool. You can find directions on the use of the CC Cleaner Tool and a download link at Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html. After the CC Cleaner Tool is run then please reinstall the Creative Cloud Desktop application from Creative Cloud Help | Creative Cloud for desktop.
The CC Cleaner Tool is designed to be used after running the uninstallers. Without running the uninstallers first then a complete removal may not be possible. -
Hi,
I'm using Windows 8.1 and I can see photoshop CC 64 bit. But when I'm launching it, it throws an error "Some of the application components are missing from the Application directory, Please reinstall the application". I've reinstalled twice but getting the same error. Whereas the 32 bit application works fine. Any help?Branching this to a new discussion.
Govinda_s13 are you still receiving the error messages referenced above?
Maybe you are looking for
-
How do I transfer Ipad contacts to my new Macbook Pro?
I just bought a new Macbook Pro. How do I transfer my Ipad contacts to my new Macbook Pro?
-
Integration engine: Inconsistent roles and problem with communication chann
Hi, I am troubled with this error for last 1 week. please help me with this: Inconsistent roles. System Landscape: Application System. SXMSGLOBAL: Integration Server.I have checked in SXMB_ADM in Integration Engine Congiguration, some entery is t
-
HT2494 I cannot get my logitec speakers to work on my iMac
I cannot get my Logitec speakers to work. They do not show up in the output section Thanks
-
Material picking by bin number
Hello all, Is there any transaction or SAP functionality to consolidate a list with all materials to be picked by bin number relevant to goods issue. Pl post documents or links related to it. Thanks, maxx
-
Embedding FLV with SWFObject in CFLAYOUTAREA
I just started using the various CF8 UI elements, and have hit a snag in attempting to embed video into a CFLAYOUTAREA. I use Jeroen Wijering's FLVPlayer, and use SWFObject to manage it. I know there are issues with using JavaScript along with the CF