Error in Application Monitor

Hello,
I am facing a weird problem.
I see an error in application monitor with no description. It only has the date and time.
When I try deleting this error, I get a message "Error deleting alert"
Now in RZ20, I see that there is an error under Purchase Order.
"Backend application errors       PurchOrder 4100001842: Transfer failed"
When I try to open this and try to complete it, I do not see any item under the screen "Alert Display". So I am unable to complete this from RZ20.
We are aware of the fact that we did have an error witht his PO. There was some config error which was rectified and moved to production after which the PO made it successfully to ECC.
But the error remained in the application monitor and is now haunting the monitoring team who are forced to check every time to see if this is the old or a new one.
Any idea on how I can get this off the app monitor?
Thank you.
Manish

Hello Muthu,
I have checked this already. We do not have any error in BBP_PD for this PO. This has got replicated to ECC with no errors.
Not sure why this is still seen in app monitor.
Any FM/Table from where I could delete this log entry. Just kidding..
Pls advise.
Thank you.
Manish

Similar Messages

  • Process  Error in the Application Monitor

    Dear All
    we currently have the below shown Process  Error in the Application Monitor. it is absolutely impossible to delete them.
    What can cause this problem, please I need a solution on how to remove them for ever.
    Application Monitors
    Shopping Cart 
    Shopping Cart :  Not transferred to backend 
    Date  Time  Error Message 
    26.03.2011  00:29:36    
    26.03.2011  01:29:36    
    Shopping Cart :  Backend application errors 
    Date  Time  Error Message 
    25.03.2011  12:22:06
    Kind Regards
    Marco

    Hi,
    Try to locate the error in RZ20 transaction and delete it from there, then refresh your application monitor.
    regards,
    MRao

  • SRM Confirmation IDOC errors - Not appearing in Application Monitor

    We receive Shipping confirmations from vendors in XML format to our Business Connector and then the IDOC gets created in SRM. Some of the IDOCs are failing due to validation errors with data in confirmation. (For example the item level shipping count doesn't match whats on PO). When the failures ocur like this, the errors getting written to Administrators Inbox. All IDOCS succesfully processed in SRM in turn will go through normal confirmation scenario (Creating IDOCs in R/3).
    Is there a way to get them into EBP Application Monitor? Please let me know.
    Thanks,
    Suren

    Hi,
    You may not get ORA-4030 in the Alert log as it for system level resource issue, so it should appear at run time for new processes trying to create new processes and are requesting memory. The existing running database processes does not get impacted when they already have memory allocated.
    04030, 00000, "out of process memory when trying to allocate %s bytes (%s,%s)"
    // *Cause:  Operating system process private memory has been exhausted
    // *Action:
    Not all ORA errors reported on alert.log file. Some of the ORA errors are reported only on client side. This error will be reported on alert.log if any of the oracle server processes is not able to allocate memory.
    HTH
    Edited by: skvaish1 on Jan 21, 2010 10:08 AM

  • SRM Application Monitor filter errors badi/exit

    Hi Guys,
    We want to filter the items from the application monitor error list (PO Backend errors and SC Backend errors).
    We want to let the user see only the PO/SC errors that belong to his purchasing organization.
    I wasn't able to find any exit/badi for these particular views.
    Do you know if there's any exit or any wda that could be enhanced to make this filter work?
    I found a BADI for the SC Monitor, but I want one for the errors.
    Thanks in advance!
    Matias.

    Hello Matias,
        Check with BBP_DOC_CHECK_BADI , it will surly help you a lot.
    BR
    Gaurav Gautam

  • My SAP SRM Application Monitors Purchase order / local errors

    I am seeing local errors in the monitor under Purchase order. The message is incorrect status in pricing, but when i click on the message i get no further information. How can I track there errors

    Hi,
    Check your outbound queue in SMQ2 if the error is there for more details. pricing error is related with the IPC so check if your IPC destinations are working in SM59.
    Please have also a look into following threads :
    Incorrect status in pricing - SRM server 5.5
    External Requirements to SRM
    Hope this helps
    Laurent.

  • System Error in Message Monitoring while it shows checked flag in SXMB_MONI

    Hia,
    We are working on ABAP Proxy --> SAP PI 7.1 --> SOAP (Asynchronous Scenario).
    (ECC -> PI -> Legacy CRM)
    I have following queries:
    1. While sending messge across to Legacy system, we can see CHECKED flag in SXMB_MONI but there is System Error in Message Monitoring. When checked legacy system is unable to receive any message. Cannot understand the issue.
    2. Is there any way to check in PI system whether the message has reached Legacy System other than making scneario synchronous?
    Regards

    System is getting connected and able to send asynchronous messages to legacy system. But getting following error while sending synchronous error:
    2010-05-10 13:15:05     Information     Delivering to channel: CC_SOAP_SOReject_Out
    2010-05-10 13:15:05     Information     SOAP: request message entering the adapter with user J2EE_GUEST
    2010-05-10 13:15:05     Information     SOAP: completed the processing
    2010-05-10 13:15:05     Information     SOAP: continuing to response message f33caa90-5c07-11df-c659-96d147c2ff0f
    2010-05-10 13:15:05     Error     SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.
    2010-05-10 13:15:05     Error     Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.
    2010-05-10 13:15:05     Error     Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.. Setting message to status failed.
    2010-05-10 13:15:06     Error     The message status was set to FAIL.
    I have already checked Data Structure and it is fine.
    Regards
    In this scenarios we are using XSLT mapping using CDATA.
    Please suggest solution.

  • System Error in Message Monitoring -Proxy to SOAP async scenario

    Hi All,
    My scenario is ABAP Proxy---> SAP PI 7.1 ---> WEbService(Asynchronous SOAP ).
    In Moni message is showing successful Flag, but message has got stuck in "system Error" at message monitoring.I can't see any Audit log in Message monitoring .
    but in related Soap Receiver communication channel i can see the below Error 
    "2010-08-11 09:54:15 Error SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005.
    2010-08-11 09:54:15 Information SOAP: sending a delivery error ack ...
    2010-08-11 09:54:15 Information SOAP: sent a delivery error ack
    2010-08-11 09:54:15 Error Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005.
    2010-08-11 09:54:15 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005. "
    Please help , what could be the problem.
    Thanks in Advance.
    Jyoti

    Hi Jyoti,
    >Is there any specific setup required at Provide side while moving to Acceptance system
    I dont think so.
    Please compare EXACTLY the settings of the two Comunication Channels, especially the server path. Please assure that you ve sent exactly the same message content from Acceptance system.
    Regards,
    Udo

  • Application monitor node display off

    Hi All,
    I am using SRM 4.0. Strangely I am running into lot of troubles in SRM since yesterday as there was a mess up in the batch jobs.
    Now, we are having an issue with Application monitor. It is not showing any error message in ITS, but I could see some error messages in RZ20. In ITS, when I click on "Display all" under purcashe order or confirmations in application monitor, it used to show the errors or it will say no error. But now it is showing GUI - RZ20 screen with a message "Node Display off".
    I have tried by restarting the Application monitor, but it didn;t help.
    Could you please help me to fix this?
    Thanks,
    Arun

    Hi,
    Please refer to the following SAP OSS notes ->
    Note 135503 CCMS monitor arch: meaning of profile parameters
    Note 781100 CCMS: Too many nodes/too little memory during KMC monitoring
    Note 623164 CCMS: Error if alert/MONI_SEGM_SIZE=0
    Note 731165 RZ20: CCMS parameters for segment control
    Note 110368 FAQ - CCMS MONITORING INFRASTRUCTURE
    Note 509524 RZ20: Methods do not start
    Note 382769 RZ20: Error messages do not generate any Alerts
    Note 705569 BPMon: Important Msg's in Activation and Generation Protocol
    Note 807072 DataSources for ABAP and distributed statistics data
    Note 746193 RZ20: Generating all-clears ("green alerts")
    Note 783725 EP6.0 CM & Collaboration SP2 Patch 27
    Note 441768 - Displaying canceled shopping carts in monitor 3.0 and 3.5
    Note 395699 - Display shopping baskets with status 7 in the Monitor

  • Application monitor in SRM 7.0

    Hi,
    we have SRM 7.0 in use and want to hide the following  application monitor : Contract, Business Partner. We want only the SC application monitor . OSS 1074659 is not possible because we have NETWEAVER BC instead of portal.
    Kind regards,
    Dorothea

    HI,
    Could you please tell me, how did you solve this issue. I'm having the same type of issue.
    Creation of shoppingcart thro'MDM catalog. It is approved. Local Purchase order is not getting
    created because of the following error and it is not replicated to the ECC 6.0.
    in Application monitor in SRM 7.0 Portal screen.
    1. Backend error: Enter G/L Account
    2. Purchase order still contain faulty items.
    3. Issue with error showing Sum of Quantities >1.728< larger than total quantity
    PO Status is'error in process'
    Regards,
    Anjan

  • I have a hp pavillion descktop running vista error teaser application?????

    i have a hp pavillion descktop running vista error teaser application pops up when i put a pc game into the drive, it reconzes it but when i go to download the game the error teaser application pops up, some games work and others have this error

    Rooter42, welcome to the forum.
    When requesting help you should always include the make/model (i.e. p6-xxxx) of the computer and/or monitor. This information is necessary for us to review the specifications of them.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Application monitor

    Hello
    I have to build an application monitor (an user exit), I have the SAP documentation 'Application monitor with Sap Solution Manager', but i don't know how to fill /SSA/EXM program to create the customizing (and so the CCMS node).
    The aim is to count number of items in a SAP table.
    Does anybody can help me ?
    Many thanks.
    Fred

    Hi Frederic,
    have you already checked the available technical documentation?
    http://service.sap.com/bpm -> Media Library -> Technical Information
    BPMon Error&Handling Roadmap
    Business Process Monitoring - Setup Roadmap 
    Setup Guide - Application Monitoring 
    Setup Guide - Business Process Monitoring 
    Setup Guide - User Exit  
    Workload Distribution Analysis for Background Jobs 
    The "Setup Guide - User Exit" contains report /SSM/EXM.
    Best regards,
    Ruediger Stoecker

  • Application Monitor entries "auto-deleted"?

    Hi guys,
    Everyday I check the application monitor looking for PO errors, however.. I have noticed that after some days the old errors are deleted automatically from that screen.
    I would like to avoid this behavior, Do you know how can I accomplish this ?
    Thanks for your help !
    Kind regards,
    Diego

    Just for sharing:
    1. Go to RZ20
    2. Expand  "SAP B2B Procurement - Monitors"
    3. Double-click on "Purchase Order"
    4. Expand "Purchase Order -> <SID>"
    5. Expand "<SID>\Business to Business Procurement(300)\...\Purchase Order"
    6. Select "Backend application errors" and click the "Properties" button.
    7. Click the modify button (pencil)
    I was able to modify this even when the client is closed for modifications.
    Best regards,
    Diego

  • I cannot open Pages from the app or from a saved document on the desk top.  I get an error: "The application Pages cannot be opened  -1712"  Any suggestions?

    I cannot open Pages from the app or from a saved document on the desk top.  I get an error: "The application Pages cannot be opened  -1712"  Any suggestions?

    The following previous discussion has a solution that worked for a variety of people with the -1712 error on a variety of applications and may help: The application Safari can't be opened -1712

  • I just tried to install the 11.4 update (or whichever one is the most recent update as of 1/26/2014) and when it failed i tried to install manually and now whenever i try to use it, i get the following error: the application has failed to start because MS

    i just tried to install the 11.4 update (or whichever one is the most recent update as of 1/26/2014) and when it failed i tried to install manually and now whenever i try to use it, i get the following error: "The application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem." Right after i click ok i then get this error: "Itunes was not installed correctly. Please reinstall Itunes. Error 7 (Windows error 126)." I tried to uninstall Itunes and then reinstall the 11.03 version but that didnt work either. I want to know if i copy all of the music in my itunes folder to an external without consolidating can i still transfer all my itunes music from my current windows xp pc to a brand new one and have my current itunes library in my new pc? Basically i just want to know 3 things: What exactly does consolidating the itunes library do? Can i copy, paste, and transfer my itunes library to an external and from there to a new pc? Will i be able to transfer my itunes library without consolidating the files?

    I have found a temporary solution, allowing the previous version of iTunes (v. 11.1.3 (x64) in my case) to be re-installed.  It will allow you to re-establish use of iTunes until the Apple software engineers fix the most recent disasterous upgrade (v. 11.1.4).  Please see and follow the procedure in the following article:http://smallbusiness.chron.com/reverting-previous-version-itunes-32590.html   The previous version works beautifully.

  • System error in message monitoring

    Hello,
    Scenario is proxy to database. Status seems to sytem error in message monitoring. Error detail is  In audit log of message details as belows:
    JDBC Message processing failed, due to Error processing request in sax parser: Error when executing statement for table/stored proc. 'If_test ' (structure 'STATEMENT'): java.sql.SQLException: ORA-00936: missing expression 
    I should resent this message content. When i press Resend tab  in message monitoring, error status is not being changed.
    Thanks in advance

    Hi,
    Check the payload received is correct or not in this case ...
    Take payload and check at mapping level...
    if you are using insert or update statement you can enable log at the receiver jdbc channel in advance mode(logSQLStaement to true) to see how the statement is getting framed ...
    HTH
    Rajesh

Maybe you are looking for