Error in Approval process

Hi All,
I am a new bie to OIM 11g. I have developed a custom (single level parallel) approval composite and it is working fine.
According to my new requirement I need to add two serial approval blocks before the parallel approval block. On the whole the approval process contains 3 levels of approvals with the third level as a parallel approval block.
The 1st level approval will be a default approval and by default all the requests should be routed to this level.
Based on a condition(Create/update/delete user) the request should be routed to 2nd and 3rd level approval.
In one of the scenario(condition) the requests are routed to 1st, 2nd,3rd level. In an other scenario the requests are routed to 1st and 3rd level approval. In both the above mentioned scenarios the request is successfully completed.
In the last scenario(where condition for 2nd and 3rd level fail) the request will be routed only to the 1st level approval and not to the other two levels. In this scenario I am getting the following error and the request is failing.
WLSPropertyUtils:getOperationName(),operation name is null
Invalid outcome COMPLETED received from SOA for the request id 3058.
[CALLBACKMSG] Inside Status Change plugin for request 3058 and the status is : Request Failed.
[CALLBACKMSG] Inside Status Change plugin for request 3058, target tye is Resource and operation is MODIFYRESOURCE.
[CALLBACKMSG] Inside Status Change plugin for request 3058, target tye is Resource and operation is MODIFYRESOURCE.
An attempt was made to look up non-versioned
global resource "queue" from an application version "oim [Version=11.1.1.3.0]". This can potentially cause conflict of the global resource usages among multiple application versions.
WLSPropertyUtils:getOperationName(),operation name is null
Please let me know if I am going wrong any where or Please suggest what needs to done to resolve this issue.
Thanks in advance for the help.
Thanks,
PT

Hi All,
Thanks a lot for your help.
All the above mentioned mappings are proper.
When I remove a parallel approval block present in the last level and place a single serial approval block(instead of parallel approval) , I am not getting an exception and the request is completed. But according to my requirement I sholud have a parallel block in the last approval level.
Can some body please help me in resolving this issue.
Thanks,
PT

Similar Messages

Error during approval Process flow in Process controlled workflow

Hello Experts,
We are in SRM 7.0 classic scenario using Process controlled workflow.WE recently connected a new backend R/3 system to our SRM system i.e we now have 2 R/3 backend system connected to SRM system
It is regarding the two new additional account assignment categories that came into picture when we connected the new R/3 backend system to our SRM system, i.e. Asset and Network.
There seems to be some problem with the approval workflow for those SHC, that have such Acc *** Cats.
Please find below my obeservations:
- if you have just one line item in the SHC, and this item is either booked on Asset or on Network, than everything goes fine. After the Acc *** approval, the PR is created in R/3
- if you have SC with a mix between an "old" Acc *** Cat (Cost Centre, WBS and Order) and one of the "new" Acc *** Cats, than the workflow is not working as required --- the manager, that is responsible for the accounting approval of the two positions (e.g Cost Centre and Asset) gets only one work item in his approval overview --- in that work item, the two positions are there, but the Asset one is grayed out --- so, the Manager approves only the Cost Centre positions and than the SC is no longer with the approver --- if you observe the SC now from the requisitioner point of view, the status of the line items in the approval process overview of both(!) lines is "approved", but the overall status of the SC is still "in approval"
Can you all experts plz let us know why this is happening and how this can be resolved?
Any pointers will be highly appreciated.
Thanks & Regards,
RKS

Hi,
What is Resp. Resolver Name and Decision Type in your Process Level Definition? Did you create custom agent BADI implementation?
Regards,
Masa

OIM: Error while deploying Custom Approval Process for Self-Register

While deploying the Custom Approval Process for Self-Register, i am getting the following error in scac.log file
Nov 16, 2011 2:48:58 PM oracle.fabric.common.wsdl.SchemaManager isIncrementalBuildSupported
INFO: XMLSchema incremental build enabled.
Nov 16, 2011 2:48:58 PM com.collaxa.cube.CubeLogger info
INFO: validating "ApprovalProcess.bpel" ...
oracle.jrf.UnknownPlatformException: JRF is unable to determine the current application server platform.
     at oracle.jrf.ServerPlatformSupportFactory.getInstance(ServerPlatformSupportFactory.java:79)
     at oracle.integration.platform.blocks.WLSPlatformConfigurationProvider.<clinit>(WLSPlatformConfigurationProvider.java:44)
     at oracle.integration.platform.blocks.FabricConfigManager.<clinit>(FabricConfigManager.java:155)
     at oracle.integration.platform.blocks.xpath.FabricXPathFunctionResolver.loadXpathFunctions(FabricXPathFunctionResolver.java:271)
     at oracle.integration.platform.blocks.xpath.FabricXPathFunctionResolver.loadXPathConfigFile(FabricXPathFunctionResolver.java:153)
     at oracle.integration.platform.blocks.xpath.FabricXPathFunctionResolver.init(FabricXPathFunctionResolver.java:51)
     at com.collaxa.cube.xml.xpath.BPELXPathFunctionNameResolver.loadFabricXpathFunctions(BPELXPathFunctionNameResolver.java:57)
     at com.collaxa.cube.xml.xpath.BPELXPathFunctionNameResolver.<init>(BPELXPathFunctionNameResolver.java:48)
     at com.collaxa.cube.xml.xpath.BPELXPathFunctionNameResolver.<clinit>(BPELXPathFunctionNameResolver.java:44)
     at com.collaxa.cube.lang.compiler.bpel.XPathExprValidatorVisitor.<init>(XPathExprValidatorVisitor.java:122)
     at com.collaxa.cube.lang.compiler.bpel.AssignValidator.<init>(AssignValidator.java:89)
     at com.collaxa.cube.lang.compiler.bpel.BpelParser.<init>(BpelParser.java:452)
     at com.collaxa.cube.lang.compiler.bpel.BPELValidator.validate(BPELValidator.java:60)
     at com.collaxa.cube.lang.compiler.BPEL1Processor.validate(BPEL1Processor.java:329)
     at com.collaxa.cube.lang.compiler.BPEL1Processor.process(BPEL1Processor.java:153)
     at com.collaxa.cube.lang.compiler.CubeParserHelper.compile(CubeParserHelper.java:47)
     at oracle.fabric.bpel.bpelc.BPELComponentValidator.validate(BPELComponentValidator.java:40)
     at oracle.soa.scac.ValidateComposite.validateComponentTypeServicesReferences(ValidateComposite.java:1117)
     at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:500)
     at oracle.soa.scac.ValidateComposite.run(ValidateComposite.java:150)
     at oracle.soa.scac.ValidateComposite.main(ValidateComposite.java:135)
Nov 16, 2011 2:49:00 PM CubeProcessGenerator compile
WARNING: classpath is: D:\JDev11g\Middleware\jdeveloper\jdev\extensions\oracle.sca.modeler.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\fabric-runtime.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.mgmt_11.1.1\soa-infra-mgmt.jar;D:\JDev11g\Middleware\oracle_common\modules\oracle.fabriccommon_11.1.1\fabric-common.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\orabpel.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.mediator_11.1.1\mediator_client.jar;D:\JDev11g\Middleware\oracle_common\modules\oracle.mds_11.1.1\mdsrt.jar;D:\OIMPS1\Middleware\oracle_common\modules\oracle.jps_11.1.1\jps-manifest.jar;;D:\OIMPS1\Middleware\Oracle_IDM1\server\workflows\new-workflow\process-template\SelfRegistrationApprovalApp\SelfRegistrationApproval\SCA-INF\classes;D:\OIMPS1\Middleware\Oracle_IDM1\server\workflows\new-workflow\process-template\SelfRegistrationApprovalApp\SelfRegistrationApproval\SCA-INF\classes;D:\OIMPS1\Middleware\Oracle_IDM1\server\workflows\new-workflow\process-template\SelfRegistrationApprovalApp\SelfRegistrationApproval\SCA-INF\gen-classes;D:\OIMPS1\Middleware\Oracle_IDM1\server\workflows\new-workflow\process-template\SelfRegistrationApprovalApp\SelfRegistrationApproval\SCA-INF\lib\oimclient.jar;D:\JDev11g\Middleware\oracle_common\modules\commonj.sdo_2.1.0.jar;D:\JDev11g\Middleware\oracle_common\modules\oracle.fabriccommon_11.1.1\fabric-common.jar;D:\JDev11g\Middleware\oracle_common\modules\oracle.xdk_11.1.0\xmlparserv2.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\bpel1-1-xbeans.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\orabpel-common.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\orabpel.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\bpel_coherence_config.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\orabpel-exts.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\thirdparty.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\bpm-analytics.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\orabpel-thirdparty.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\wsif-binding.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\orabpel-validator.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\monitor-rt-xbean.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\oracle.soa.bpmn.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\user-patch.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.thirdparty.jar;D:\JDev11g\Middleware\jdeveloper\uddi\lib\oracle.soa.uddi.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\bpm-infra.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\testfwk-xbeans.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\fabric-ext.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\soa-infra-scheduler.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\xmlunit-1.1.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\fabric-runtime.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\soa-infra-tools.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\soa-xpath-exts.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\oracle-soa-client-api.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.wls.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\fabric-client.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\fabric-runtime-ext-was.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\fabric-runtime-ext-wls.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\oracle.soa.fabric.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.workflow_11.1.1\bpm-services.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.ext_11.1.1\classes
In scac_out.xml file following is the error message
<Fault>
<severity>error</severity>
<loc>/ns:composite</loc>
<line/>
<col/>
<file/>
<msg>
<![CDATA[SCAC-50012]]>
</msg>
</Fault>

Hi,
I have run into the same problem with SOA 11.1.1.5 version. In my case after fixing the following two errors it seems to work fine.
If you have followed the guide, there must be some errors:
First the java code if copied then contains an extra enter value:
Instead of:
"try {
System.out.println("Prototype for invoking an OIM API from a SOA Composite");
System.out.println("RTM Usecase: Self Registration Approval by Organization
Administrator");"
Use the following:
"try {
System.out.println("Prototype for invoking an OIM API from a SOA Composite");
System.out.println("RTM Usecase: Self Registration Approval by Organization Administrator");"
The other error is that you should not use <BEAHOME>/oracle_common/modules/oracle.jps_11.1.1/jps-manifest.jar, but the <BEAHOME>/oracle_common/modules/oracle.jps_11.1.1/jps-api.jar in jdeveloper. After these the deployment to the application server works fine for me.

Error provisioning a resource with custom approval process

Hi,
While trying to provision a resource with custom approval process, I get the following error:
<May 11, 2012 8:07:18 AM IST> <Warning> <oracle.wsm.agent.handler.wls.WLSPropertyUtils> <BEA-000000> <WLSPropertyUtils:getOperationName(),operation name is null>
<May 11, 2012 8:07:18 AM IST> <Warning> <org.eclipse.persistence.session.oim> <BEA-000000> <
Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLException: ORA-12899: value too large for column "DEV_OIM"."REQUEST_APPROVALS"."APPROVAL_STATUS" (actual: 442, maximum: 32)
Error Code: 12899
Call: UPDATE REQUEST_APPROVALS SET APPROVAL_STATUS = ? WHERE (REQUEST_APPROVALS_KEY = ?)
bind => [com.oracle.bpel.client.BPELFault: faultName: {{http://schemas.xmlsoap.org/ws/2003/03/business-process/}selectionFailure}
parts: {{
summary=<summary>XPath query string returns zero node.
The assign activity of the to node query is returning zero node.
Either the to node data or the xpath query in the to node was invalid.
According to BPEL4WS spec 1.1 section 14.3, verify the to node value at line number 251 in the BPEL source.
</summary>}
, 6]
Query: UpdateObjectQuery(oracle.iam.request.vo.ApprovalData@11e00d4b)
at org.eclipse.persistence.exceptions.DatabaseException.sqlException(DatabaseException.java:324)
at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeDirectNoSelect(DatabaseAccessor.java:801)
at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeNoSelect(DatabaseAccessor.java:867)
at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.basicExecuteCall(DatabaseAccessor.java:587)
at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeCall(DatabaseAccessor.java:530)
at org.eclipse.persistence.internal.sessions.AbstractSession.executeCall(AbstractSession.java:914)
at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:206)
at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:192)
at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.updateObject(DatasourceCallQueryMechanism.java:715)
at org.eclipse.persistence.internal.queries.StatementQueryMechanism.updateObject(StatementQueryMechanism.java:430)
at org.eclipse.persistence.internal.queries.DatabaseQueryMechanism.updateObjectForWriteWithChangeSet(DatabaseQueryMechanism.java:1141)
at org.eclipse.persistence.queries.UpdateObjectQuery.executeCommitWithChangeSet(UpdateObjectQuery.java:84)
at org.eclipse.persistence.internal.queries.DatabaseQueryMechanism.executeWriteWithChangeSet(DatabaseQueryMechanism.java:287)
at org.eclipse.persistence.queries.WriteObjectQuery.executeDatabaseQuery(WriteObjectQuery.java:58)
at org.eclipse.persistence.queries.DatabaseQuery.execute(DatabaseQuery.java:675)
at org.eclipse.persistence.queries.DatabaseQuery.executeInUnitOfWork(DatabaseQuery.java:589)
at org.eclipse.persistence.queries.ObjectLevelModifyQuery.executeInUnitOfWorkObjectLevelModifyQuery(ObjectLevelModifyQuery.java:109)
at org.eclipse.persistence.queries.ObjectLevelModifyQuery.executeInUnitOfWork(ObjectLevelModifyQuery.java:86)
at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.internalExecuteQuery(UnitOfWorkImpl.java:2898)
at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1225)
at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1207)
at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1167)
at org.eclipse.persistence.internal.sessions.CommitManager.commitChangedObjectsForClassWithChangeSet(CommitManager.java:233)
at org.eclipse.persistence.internal.sessions.CommitManager.commitAllObjectsWithChangeSet(CommitManager.java:108)
at org.eclipse.persistence.internal.sessions.AbstractSession.writeAllObjectsWithChangeSet(AbstractSession.java:3260)
at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.commitToDatabase(UnitOfWorkImpl.java:1413)
at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.commitToDatabaseWithChangeSet(UnitOfWorkImpl.java:1518)
at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.writeChanges(UnitOfWorkImpl.java:5499)
at oracle.iam.request.repository.ApprovalRepository.updateApprovalInstanceWithOutcome(ApprovalRepository.java:84)
at oracle.iam.request.impl.ApprovalManager.approvalInstanceComplete(ApprovalManager.java:111)
at oracle.iam.request.impl.ApprovalPolicyServiceImpl.updateApprovalResult(ApprovalPolicyServiceImpl.java:52)
at oracle.iam.request.api.ApprovalPolicyServiceEJB.updateApprovalResultx(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy351.updateApprovalResultx(Unknown Source)
at oracle.iam.request.api.ApprovalPolicyService_1nib43_ApprovalPolicyServiceRemoteImpl.updateApprovalResultx(ApprovalPolicyService_1nib43_ApprovalPolicyServiceRemoteImpl.java:462)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:84)
at $Proxy184.updateApprovalResultx(Unknown Source)
at oracle.iam.request.api.ApprovalPolicyServiceDelegate.updateApprovalResult(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at Thor.API.Base.SecurityInvocationHandler$1.run(SecurityInvocationHandler.java:68)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.security.Security.runAs(Security.java:41)
at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(weblogicLoginSession.java:52)
at Thor.API.Base.SecurityInvocationHandler.invoke(SecurityInvocationHandler.java:79)
at $Proxy350.updateApprovalResult(Unknown Source)
at oracle.iam.request.workflowcallback.ApprovalCallBack.completed(ApprovalCallBack.java:28)
at oracle.iam.platform.workflowservice.ws.CallbackServiceImpl.callback(CallbackServiceImpl.java:98)
at oracle.iam.platform.workflowservice.ws.wls.CallbackService.callback(CallbackService.java:33)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker.invoke(WLSInstanceResolver.java:92)
at weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker.invoke(WLSInstanceResolver.java:74)
at com.sun.xml.ws.server.InvokerTube$2.invoke(InvokerTube.java:151)
at com.sun.xml.ws.server.sei.EndpointMethodHandlerImpl.invoke(EndpointMethodHandlerImpl.java:265)
at com.sun.xml.ws.server.sei.SEIInvokerTube.processRequest(SEIInvokerTube.java:100)
at weblogic.wsee.jaxws.tubeline.FlowControlTube$FlowControlAwareTube.processRequest(FlowControlTube.java:155)
at weblogic.wsee.jaxws.tubeline.FlowControlTube$1.run(FlowControlTube.java:94)
at weblogic.wsee.jaxws.tubeline.FlowControlTube$1.run(FlowControlTube.java:92)
at javax.security.auth.Subject.doAs(Subject.java:337)
at weblogic.wsee.jaxws.tubeline.FlowControlTube.processRequest(FlowControlTube.java:91)
at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:604)
at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:563)
at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:548)
at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:445)
at com.sun.xml.ws.server.WSEndpointImpl$2.process(WSEndpointImpl.java:373)
at com.sun.xml.ws.transport.http.HttpAdapter$HttpToolkit.handle(HttpAdapter.java:524)
at com.sun.xml.ws.transport.http.HttpAdapter.handle(HttpAdapter.java:255)
at com.sun.xml.ws.transport.http.servlet.ServletAdapter.handle(ServletAdapter.java:140)
at weblogic.wsee.jaxws.WLSServletAdapter.handle(WLSServletAdapter.java:208)
at weblogic.wsee.jaxws.HttpServletAdapter$AuthorizedInvoke.run(HttpServletAdapter.java:310)
at weblogic.wsee.jaxws.HttpServletAdapter.post(HttpServletAdapter.java:223)
at weblogic.wsee.jaxws.JAXWSServlet.doPost(JAXWSServlet.java:124)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at weblogic.wsee.jaxws.JAXWSServlet.service(JAXWSServlet.java:79)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.am.agent.wls.filters.OAMServletAuthenticationFilter.doFilter(OAMServletAuthenticationFilter.java:260)
at oracle.security.am.agent.wls.filters.OAMValidationSystemFilter.doFilter(OAMValidationSystemFilter.java:133)
at oracle.security.wls.oamagent.OAMAgentWrapperFilter.doFilter(OAMAgentWrapperFilter.java:121)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: java.sql.SQLException: ORA-12899: value too large for column "DEV_OIM"."REQUEST_APPROVALS"."APPROVAL_STATUS" (actual: 442, maximum: 32)
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:74)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:135)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:210)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:473)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:423)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1095)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:205)
at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1040)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1379)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3568)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3694)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeUpdate(OraclePreparedStatementWrapper.java:1508)
at weblogic.jdbc.wrapper.PreparedStatement.executeUpdate(PreparedStatement.java:172)
at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeDirectNoSelect(DatabaseAccessor.java:792)
at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeNoSelect(DatabaseAccessor.java:867)
at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.basicExecuteCall(DatabaseAccessor.java:587)
at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeCall(DatabaseAccessor.java:530)
at org.eclipse.persistence.internal.sessions.AbstractSession.executeCall(AbstractSession.java:914)
at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:206)
at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:192)
at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.updateObject(DatasourceCallQueryMechanism.java:715)
at org.eclipse.persistence.internal.queries.StatementQueryMechanism.updateObject(StatementQueryMechanism.java:430)
at org.eclipse.persistence.internal.queries.DatabaseQueryMechanism.updateObjectForWriteWithChangeSet(DatabaseQueryMechanism.java:1141)
at org.eclipse.persistence.queries.UpdateObjectQuery.executeCommitWithChangeSet(UpdateObjectQuery.java:84)
at org.eclipse.persistence.internal.queries.DatabaseQueryMechanism.executeWriteWithChangeSet(DatabaseQueryMechanism.java:287)
at org.eclipse.persistence.queries.WriteObjectQuery.executeDatabaseQuery(WriteObjectQuery.java:58)
at org.eclipse.persistence.queries.DatabaseQuery.execute(DatabaseQuery.java:675)
at org.eclipse.persistence.queries.DatabaseQuery.executeInUnitOfWork(DatabaseQuery.java:589)
at org.eclipse.persistence.queries.ObjectLevelModifyQuery.executeInUnitOfWorkObjectLevelModifyQuery(ObjectLevelModifyQuery.java:109)
at org.eclipse.persistence.queries.ObjectLevelModifyQuery.executeInUnitOfWork(ObjectLevelModifyQuery.java:86)
at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.internalExecuteQuery(UnitOfWorkImpl.java:2898)
at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1225)
at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1207)
at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1167)
at org.eclipse.persistence.internal.sessions.CommitManager.commitChangedObjectsForClassWithChangeSet(CommitManager.java:233)
at org.eclipse.persistence.internal.sessions.CommitManager.commitAllObjectsWithChangeSet(CommitManager.java:108)
at org.eclipse.persistence.internal.sessions.AbstractSession.writeAllObjectsWithChangeSet(AbstractSession.java:3260)
at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.commitToDatabase(UnitOfWorkImpl.java:1413)
at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.commitToDatabaseWithChangeSet(UnitOfWorkImpl.java:1518)
at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.writeChanges(UnitOfWorkImpl.java:5499)
at oracle.iam.request.repository.ApprovalRepository.updateApprovalInstanceWithOutcome(ApprovalRepository.java:84)
at oracle.iam.request.impl.ApprovalManager.approvalInstanceComplete(ApprovalManager.java:111)
at oracle.iam.request.impl.ApprovalPolicyServiceImpl.updateApprovalResult(ApprovalPolicyServiceImpl.java:52)
at oracle.iam.request.api.ApprovalPolicyServiceEJB.updateApprovalResultx(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy351.updateApprovalResultx(Unknown Source)
at oracle.iam.request.api.ApprovalPolicyService_1nib43_ApprovalPolicyServiceRemoteImpl.updateApprovalResultx(ApprovalPolicyService_1nib43_ApprovalPolicyServiceRemoteImpl.java:462)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:84)
at $Proxy184.updateApprovalResultx(Unknown Source)
at oracle.iam.request.api.ApprovalPolicyServiceDelegate.updateApprovalResult(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at Thor.API.Base.SecurityInvocationHandler$1.run(SecurityInvocationHandler.java:68)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.security.Security.runAs(Security.java:41)
at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(weblogicLoginSession.java:52)
at Thor.API.Base.SecurityInvocationHandler.invoke(SecurityInvocationHandler.java:79)
at $Proxy350.updateApprovalResult(Unknown Source)
at oracle.iam.request.workflowcallback.ApprovalCallBack.completed(ApprovalCallBack.java:28)
at oracle.iam.platform.workflowservice.ws.CallbackServiceImpl.callback(CallbackServiceImpl.java:98)
at oracle.iam.platform.workflowservice.ws.wls.CallbackService.callback(CallbackService.java:33)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker.invoke(WLSInstanceResolver.java:92)
at weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker.invoke(WLSInstanceResolver.java:74)
at com.sun.xml.ws.server.InvokerTube$2.invoke(InvokerTube.java:151)
at com.sun.xml.ws.server.sei.EndpointMethodHandlerImpl.invoke(EndpointMethodHandlerImpl.java:265)
at com.sun.xml.ws.server.sei.SEIInvokerTube.processRequest(SEIInvokerTube.java:100)
at weblogic.wsee.jaxws.tubeline.FlowControlTube$FlowControlAwareTube.processRequest(FlowControlTube.java:155)
at weblogic.wsee.jaxws.tubeline.FlowControlTube$1.run(FlowControlTube.java:94)
at weblogic.wsee.jaxws.tubeline.FlowControlTube$1.run(FlowControlTube.java:92)
at javax.security.auth.Subject.doAs(Subject.java:337)
at weblogic.wsee.jaxws.tubeline.FlowControlTube.processRequest(FlowControlTube.java:91)
at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:604)
at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:563)
at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:548)
at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:445)
at com.sun.xml.ws.server.WSEndpointImpl$2.process(WSEndpointImpl.java:373)
at com.sun.xml.ws.transport.http.HttpAdapter$HttpToolkit.handle(HttpAdapter.java:524)
at com.sun.xml.ws.transport.http.HttpAdapter.handle(HttpAdapter.java:255)
at com.sun.xml.ws.transport.http.servlet.ServletAdapter.handle(ServletAdapter.java:140)
at weblogic.wsee.jaxws.WLSServletAdapter.handle(WLSServletAdapter.java:208)
at weblogic.wsee.jaxws.HttpServletAdapter$AuthorizedInvoke.run(HttpServletAdapter.java:310)
at weblogic.wsee.jaxws.HttpServletAdapter.post(HttpServletAdapter.java:223)
at weblogic.wsee.jaxws.JAXWSServlet.doPost(JAXWSServlet.java:124)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at weblogic.wsee.jaxws.JAXWSServlet.service(JAXWSServlet.java:79)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.am.agent.wls.filters.OAMServletAuthenticationFilter.doFilter(OAMServletAuthenticationFilter.java:260)
at oracle.security.am.agent.wls.filters.OAMValidationSystemFilter.doFilter(OAMValidationSystemFilter.java:133)
at oracle.security.wls.oamagent.OAMAgentWrapperFilter.doFilter(OAMAgentWrapperFilter.java:121)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
<May 11, 2012 8:07:18 AM IST> <Error> <oracle.iam.request.impl> <IAM-2050200> <Failed to create the request in the repository.>
<May 11, 2012 8:07:18 AM IST> <Error> <oracle.iam.request.impl> <IAM-2050050> <Exception thrown Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLException: ORA-12899: value too large for column "DEV_OIM"."REQUEST_APPROVALS"."APPROVAL_STATUS" (actual: 442, maximum: 32)
Error Code: 12899
Call: UPDATE REQUEST_APPROVALS SET APPROVAL_STATUS = ? WHERE (REQUEST_APPROVALS_KEY = ?)
bind => [com.oracle.bpel.client.BPELFault: faultName: {{http://schemas.xmlsoap.org/ws/2003/03/business-process/}selectionFailure}
parts: {{
summary=<summary>XPath query string returns zero node.
The assign activity of the to node query is returning zero node.
Either the to node data or the xpath query in the to node was invalid.
According to BPEL4WS spec 1.1 section 14.3, verify the to node value at line number 251 in the BPEL source.
</summary>}
, 6]
Any idea how to resolve this ??
Thanks,

Based on the error trace
Caused By: java.sql.SQLException: ORA-12899: value too large for column "DEV_OIM"."REQUEST_APPROVALS"."APPROVAL_STATUS" (actual: 442, maximum: 32)
you are inserting a value too large for REQUEST_APPROVALS.APPROVAL_STATUS column. It should contain values like COMPLETED, approved, rejected etc... Check your custom approval process again.
Regards
user12841694

BPEL Error in SOA approval process

Hi,
In my composite workflow, i
have added a java code to get manager email id from manager login to send an email notification to manager.
I have set Oimclient.jar and Jps-manifest.jar in class path and successfully deployed the workflow.
When i have run my approval process, the request id status is Failed and when i see the log in Enterprise manager getting the following error
<bpelFault><faultType>0</faultType><runtimeFault xmlns="http://schemas.oracle.com/bpel/extension">
<part name="summary"><summary>oracle/iam/platform/OIMClient</summary></part><part name="detail">
<detail>java.lang.NoClassDefFoundError: oracle/iam/platform/OIMClient at orabpel.approvalprocess.ExecLetBxExe6.execute(ExecLetBxExe6.java:177) at com.collaxa.cube.engine.ext.bpel.common.wmp.BPELxExecWMP.__executeStatements(BPELxExecWMP.java:42) at com.collaxa.cube.engine.ext.bpel.common.wmp.BaseBPELActivityWMP.perform(BaseBPELActivityWMP.java:158) at com.collaxa.cube.engine.CubeEngine.performActivity(CubeEngine.java:2543) at com.collaxa.cube.engine.CubeEngine._handleWorkItem(CubeEngine.java:1165) at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1071) at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal(PerformMessageHandler.java:73)
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage(DispatchHelper.java:220) at
Thanks,
Madhavi
Edited by: Madhavi Panuganti on Mar 13, 2012 3:39 AM

we have set the bpelc class path
then we have added oimclient.jar to SCA-INF/lib in OIM_HOME/workflows/new-workflow/process-template/<Workflowname>/SCA-INF/lib
intially we created the project in OIM server machine and zipped it and taken it to my localbox (where my Jdeveloper exists) i have customized the workflow and deployed the same to SOA server, i only set the jasr files in project properties section
Now am i adding the oimclient.jar at correct place...
pls respond

Approval process error.

Dear all,
when i submit the approval process i got this error....
"System Error
An exception occurred during the program execution. Below you will find technical information pertaining to this exception that you might want to forward to your system administrator. "
what can i do to solve this problem.

Dear vanissmca,
This is quite an old post, has the issue since been resolved? If not what version/SP level are you on?
Regards,
Lorcan.

Approved invoices can not be edited - Approval process

Hi Experts -
I have recently raised an incident with SAP about Approval process - the complete message and support reply is as follows - but i believe we need a change in the approval process - if the approval required is only one but you have defined two people (Either or OR) in the approver list - the system should allow the document to be edited if one of the approvers reject it.
please let me know and i believe we need a change in design - unless otherwise a solid reason is given to justify the existing design
10.07.2009 10:32 Description (English) by SRS Manian
     We have created approval procedure for all the invoices which are entered into the system., The
'Accts' user enters the invoice into the system - the invoice comes for approval to 'Manager' user.
When the Manager opens the invoice via Alert window - he/she wants to modify certain information
(lines as well as Sales person) and approve it.
The invoice which gets opened from the alert window - does not allow the user 'Manager' to modify at
all. All the information on the invoice are greyed out.
The system should allow the user 'Manager' to modify the information. Since the manager has full
authorization to the system.
10.07.2009 10:35 Info to Reporter by SAP
     Dear Partner/Customer,
We have received your inquiry and are currently processing it.
You will be contacted with a solution or an update as soon as possible.
For further details regarding the phase your message is in at the
moment please refer to:
http://service.sap.com/%7Esapidb/011000358700000575782007E
Kind regards,
SAP Business One Product Support
10.07.2009 10:59 Reply to Reporter by SAP
     Dear Manian,
Thank you for contacting us.
When the originator sends the document for manager's approval, note that the at that stage, the document is still in the 'Approval Process'. This is because the system is waiting for the 'Manager' to 'Approve or Reject' the document. Hence, looking at the Document, it is still in 'Draft - Pending' Status.
When the document is in 'Draft-Pending' Status, the document is not available for editing, because the system considers that it is still in the waiting process. In your case, the manager cannot edit t he document.
To amend the document, an action is required from the approver either to reject it first. Once rejected, it can be amended and re-sent for approval.
I have checked our knowledge base and noted that there is an article which describes the approval process. Please refer to the Expert on Phone Wiki Article (March 2009) with title: Why a draft documen t in an approval process cannot be modified by the originator?
The link will provide the explanation:
https://www.sdn.sap.com/irj/scn/wiki?path=/pages/viewpage.action&pageid=88735894
I have also attached Notes 1321234 and 1111431 for your reference.
Best regards,
Lorna Real
Support Consultant
Product Support for SAP Business One
SAP Ireland
10.07.2009 11:59 Reply to Support Center by SRS Manian
     Thanks for the reply. The scenario is when the Manager receives the
document for approval, he wanted to edit and add it. Your reply (and
documentations) states that it needs to be rejected first before it is
available for editing. When it is gets rejected - the person who
orignated the document gets an alert and he can edit it. Here the
Manager must get an alert so that he can edit the Rejected document.
When the 'manager' rejects the document, and goes back to the alert
window to open the document - it is still greyed out !!
How does the 'manager' reject the document and edits it ?
regards
Manian
10.07.2009 12:11 Reply to Reporter by SAP
     Dear Manian,
If after the Manager rejects it and still the document is not editable (greyed out), it means that the document may still be in the 'Approval Process'. When it is greyed out, what is the status of the document in the header? Does it say 'Rejected' or 'Pending'?
If it is still in 'Pending' mode, please verify the number of 'Approvers' set in the 'Stages' tab of the 'Approval Template - Setup' window. If there is more than one user listed as 'Approver', and o nly 1 approval is required, the system provides an opportunity to other 'Approvers' to approve or reject the document. If in your case, the number of approvers is 2, and manager 'rejected' it, the sys tem still keeps the document in Pending status as it waits for another approver's decision to reject or approve it.
Also, verify the number of 'Approvals' required. If the number of 'Approvers' who have not rendered their decision is greater than or equal to the 'Approvals' required (e.g. approvers - 2, required ap provals - 2) the system keeps the document within the approval process. This is to allow the other 'Approvers' to decide on the document.
I hope this clarifies the behaviour. If you can provide us a step by step screenshot of the issue, this may help us to provide a more accurate response.
Best regards,
Lorna Real
Support Consultant
Product Support for SAP Business One
SAP Ireland
10.07.2009 12:28 Reply to Support Center by SRS Manian
     Hi:
The status of the document in the Header says 'Pending' and the status
below the document number says 'Suspended' - it is not showing as 'Draft'
Regards
Manian
10.07.2009 12:42 Call to Customer / Partner by SAP
     Performed on: 10.07.2009 10:41:59 (UK)
Contact person: SRS Manian
Status of discussion: Customer not reached
Subject:
Called the partner but currently engaged on another line.
Would like to hold a webex.
10.07.2009 12:42 Reply to Reporter by SAP
     Dear Manian,
I'm trying to call you but there was no response on your mobile.
When the header says 'Pending', then it means the document is still within the approval process. Please check the Approval Template and see the number of approvers and the number of approvals require d.
The number of approvals and approvers may be greater than 1. In this case, the system waits for other approvers to approve or reject the document. Once all the approvers have rejected the document, th en the document will be released and available for editing.
Best regards,
Lorna Real
Support Consultant
Product Support for SAP Business One
SAP Ireland
10.07.2009 18:11 Reply to Support Center by SRS Manian
     Hi:
Thanks for the reply - i tried this and found out the following:
1 - In the approval templates - we had mentioned number of approvals
required as '1'.
2 - in the number of approvers - we had mentioned two users
Though the template requires only one approvals (Either or OR) the system
expects both of them to approve or reject -
Can u please let me why is this behaving like this - or is this is the
way it is designed ? - if this is the way it is designed - i beleive it
is wrong - weneed to give a solution to the customer
regards
Manian
11.07.2009 05:52 Reply to Reporter by SAP
     Dear Manian,
Thank you for the information. The behaviour is a current system definition documented as per Note 1321234. I have attached the said Note for your reference. When only 1 approval is required and there are 2 or more persons are allowed to approve the document, the document does not get automatically rejected when 1 person 'rejects' it. The system waits for other approvers to render their decision b ecause a person may still approve or reject the document.
The design is not an application error. If you would like to change this design, please post your requirement in our SAP Business One Product Development Collaboration
forum. You can find the forum in this link:
/community [original link is broken]
The forum is beingmoderated by members of the Solution Management team specialized in certain areas, according to the folder you are in. Partners can impact the design of specific features by posting suggestions and feedback at this forum. Kindly refer to Note 1028874 which describes more on the above process.
As the request will be handled through another process, we kindly request that this support message be closed.
Thank you for your understanding.
Best regards,
Lorna Real
Support Consultant
SAP Product Support for SAP Business One
SAP Ireland
11.07.2009 09:02 Reply to Support Center by SRS Manian
     Hi Thanks for the reply - however, the solution given doesnot address the
problem we are beingfaced with our client
Is there a Development Request we can raise so that this problem is
addressed in future
I am going ahead and confirming this Message though
regards
Manian
11.07.2009 10:04 Reply to Reporter by SAP
     Dear Manian,
Thanks for the information. I understand the customer's requirement. As previously mentioned, please log a development request in this link:
/community [original link is broken] This is from Note 1028874.
Unfortunately,we at the support centre does not have access to the list of development requests. Hence, kindly follow the process in Note 1028874.
I'm sending the message back to your side for confirmation.
Best regards,
Lorna Real
Support Consultant
Product Support for SAP Business One
SAP Ireland
SAP Notes
Number     Short text
0001035200
Issue can be solved via existing documentation
0001111431
Deleting rejected draft documents.
0001167635
Maintenance Policy (L)
0001321234
Status of a document rejected within the Approval Process.

Hi Gordon - thanks for the reply - i am sorry i never realized that the message i raised could be messed up like this - the following is a clear message with some paragraphs:
Hi Experts - I have recently raised an incident with SAP about Approval process - the complete message and support reply is as follows - but i believe we need a change in the approval process - if the approval required is only one but you have defined two people (Either or OR) in the approver list - the system should allow the document to be edited if one of the approvers reject it. please let me know and i believe we need a change in design - unless otherwise a solid reason is given to justify the existing design
SRS Manian We have created approval procedure for all the invoices which are entered into the system., The 'Accts' user enters the invoice into the system - the invoice comes for approval to 'Manager' user. When the Manager opens the invoice via Alert window - he/she wants to modify certain information (lines as well as Sales person) and approve it. The invoice which gets opened from the alert window - does not allow the user 'Manager' to modify at all. All the information on the invoice are greyed out. The system should allow the user 'Manager' to modify the information. Since the manager has full authorization to the system.
Reply to Reporter by SAP Dear Manian,
Thank you for contacting us. When the originator sends the document for manager's approval, note that the at that stage, the document is still in the 'Approval Process'. This is because the system is waiting for the 'Manager' to 'Approve or Reject' the document. Hence, looking at the Document, it is still in 'Draft - Pending' Status. When the document is in 'Draft-Pending' Status, the document is not available for editing, because the system considers that it is still in the waiting process. In your case, the manager cannot edit t he document. To amend the document, an action is required from the approver either to reject it first. Once rejected, it can be amended and re-sent for approval. I have checked our knowledge base and noted that there is an article which describes the approval process. Please refer to the Expert on Phone Wiki Article (March 2009) with title: Why a draft documen t in an approval process cannot be modified by the originator? The link will provide the explanation:
https://www.sdn.sap.com/irj/scn/wiki?path=/pages/viewpage.action&pageid=88735894
I have also attached Notes 1321234 and 1111431 for your reference. Best regards, Lorna Real Support Consultant Product Support for SAP Business One SAP Ireland 10.07.2009 11:59
Reply to Support Center by SRS Manian
Thanks for the reply.
The scenario is when the Manager receives the document for approval, he wanted to edit and add it. Your reply (and documentations) states that it needs to be rejected first before it is available for editing. When it is gets rejected - the person who orignated the document gets an alert and he can edit it. Here the Manager must get an alert so that he can edit the Rejected document. When the 'manager' rejects the document, and goes back to the alert window to open the document - it is still greyed out !! How does the 'manager' reject the document and edits it ? regards Manian
Reply to Reporter by SAP
Dear Manian, If after the Manager rejects it and still the document is not editable (greyed out), it means that the document may still be in the 'Approval Process'. When it is greyed out, what is the status of the document in the header? Does it say 'Rejected' or 'Pending'? If it is still in 'Pending' mode, please verify the number of 'Approvers' set in the 'Stages' tab of the 'Approval Template - Setup' window. If there is more than one user listed as 'Approver', and o nly 1 approval is required, the system provides an opportunity to other 'Approvers' to approve or reject the document. If in your case, the number of approvers is 2, and manager 'rejected' it, the sys tem still keeps the document in Pending status as it waits for another approver's decision to reject or approve it. Also, verify the number of 'Approvals' required. If the number of 'Approvers' who have not rendered their decision is greater than or equal to the 'Approvals' required (e.g. approvers - 2, required ap provals - 2) the system keeps the document within the approval process. This is to allow the other 'Approvers' to decide on the document. I hope this clarifies the behaviour. If you can provide us a step by step screenshot of the issue, this may help us to provide a more accurate response.
Best regards,
Lorna Real Support Consultant Product Support for SAP Business One SAP Ireland
Reply to Support Center by SRS Manian
Hi: The status of the document in the Header says 'Pending' and the status below the document number says 'Suspended' - it is not showing as 'Draft'
Regards
Manian 10.07.2009 12:42
Reply to Reporter by SAP
Dear Manian,
I'm trying to call you but there was no response on your mobile. When the header says 'Pending', then it means the document is still within the approval process. Please check the Approval Template and see the number of approvers and the number of approvals require d. The number of approvals and approvers may be greater than 1. In this case, the system waits for other approvers to approve or reject the document. Once all the approvers have rejected the document, th en the document will be released and available for editing.
Best regards,
Lorna Real Support Consultant Product Support for SAP Business One SAP Ireland
Reply to Support Center by SRS Manian
Hi: Thanks for the reply - i tried this and found out the following: 1 - In the approval templates - we had mentioned number of approvals required as '1'. 2 - in the number of approvers - we had mentioned two users Though the template requires only one approvals (Either or OR) the system expects both of them to approve or reject - Can u please let me why is this behaving like this - or is this is the way it is designed ? - if this is the way it is designed - i beleive it is wrong - weneed to give a solution to the customer
regards
Manian
Reply to Reporter by SAP
Dear Manian,
Thank you for the information. The behaviour is a current system definition documented as per Note 1321234. I have attached the said Note for your reference. When only 1 approval is required and there are 2 or more persons are allowed to approve the document, the document does not get automatically rejected when 1 person 'rejects' it. The system waits for other approvers to render their decision because a person may still approve or reject the document.
The design is not an application error. If you would like to change this design, please post your requirement in our SAP Business One Product Development Collaboration forum.
You can find the forum in this link:
/community [original link is broken]
The forum is being moderated by members of the Solution Management team specialized in certain areas, according to the folder you are in. Partners can impact the design of specific features by posting suggestions and feedback at this forum.
Kindly refer to Note 1028874 which describes more on the above process.
As the request will be handled through another process, we kindly request that this support message be closed. Thank you for your understanding.
Best regards,
Lorna Real Support Consultant SAP Product Support for SAP Business One SAP Ireland
Reply to Support Center by SRS Manian
Hi Thanks for the reply - however, the solution given does not address the problem we are being faced with our client Is there a Development Request we can raise so that this problem is addressed in future I am going ahead and confirming this Message though
regards
Manian
Reply to Reporter by SAP Dear Manian,
Thanks for the information. I understand the customer's requirement. As previously mentioned, please log a development request in this link:
/community [original link is broken]
This is from Note 1028874.
Unfortunately, we at the support centre does not have access to the list of development requests. Hence, kindly follow the process in Note 1028874. I'm sending the message back to your side for confirmation.
Best regards,
Lorna Real Support Consultant Product Support for SAP Business One SAP Ireland

500 internal server error while approving request

Hi All,
When trying to approve a leave request one of my user is getting a
500 internal server error
Failed to process request. Please contact your system administrator.
Root cause:
The initial exception that caused the request to fail, was
java.lang.NullPointerException
Can anyone advise me in this?
Thanks!
Swarnaprakash

Dear Prakash,
Could you please check your correct levels of SAP are according to the following link :
http://wiki.sdn.sap.com/wiki/display/ERPHCM/HOWTOGETRIDOFSPSTACKMISMATCHISSUES
In addition please check you customization of leave request is correct or not, You can check in ptarq transaction and check test application is working fine or not ??
Best Regards,
Deepak...

Internal Server error while approving leave in absence management

hi
In my project absence mgt is applicable for Netherland employees. When an NL manager applies leave and his manager from puerto rico tries to approve it from UWL , the manager is getting the following ERROR on clicking on the leave request in his inbox task.
500   Internal Server Error   Web Dynpro Container/SAP J2EE Engine/6.40
Failed to process request. Please contact your system administrator.
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
   java.lang.NullPointerException:
    at com.sap.xss.hr.lea.form.edit.VcFormEdit.setReadOnlyApprover(VcFormEdit.java:467)
    at com.sap.xss.hr.lea.form.edit.VcFormEdit.onInit(VcFormEdit.java:269)
    at com.sap.xss.hr.lea.form.edit.wdp.InternalVcFormEdit.onInit(InternalVcFormEdit.java:700)
    at com.sap.xss.hr.lea.form.edit.VcFormEditInterface.onInit(VcFormEditInterface.java:165)
    at com.sap.xss.hr.lea.form.edit.wdp.InternalVcFormEditInterface.onInit(InternalVcFormEditInterface.java:158)
    ... 37 more
This UWL error in Leave approval workflow is coming ONLY when PR manager is trying to NL employee's leave .
All other country managers ( US , CH , FR etc) are able to approve the leave without any issue.
We are using the standard leave approval workflow.
ANY SOLUTIONS Plzz???

Hello
The above issue can occur if the rule group , to which this employee belongs, the leave type is not configured correctly. Please check the view V_T556A_WEB. The leave type and the rule group need to be defined here .
Also make sure that the counting rule for the leave type is also define correctly in T556C. Once the leave type for the approver which belongs to the rule group has been correctly configured, way it has been done for normal employees, there will not be any issue.
Kindly complete the necessary customizing and check your results.
Thanks and kind Regards
Ramana

Access Enforcer(error in approving the request) and import roles

Dear all,
error in approving the request at security stage(last)
manager and role owner are successfully approved.
and also importing roles into access enforcer was not successful.
imortstatus : 0 roles imported of 28 records found.
please find the system log:
2008-09-05 13:01:34,625 [SAPEngine_Application_Thread[impl:3]_8] DEBUG com.virsa.ae.service.messaging.MessageFormatter : parseDesc :   : INTO the method : desc :Please specify a file to import.paramNames :paramsMap :{FIELD_NAME=#_!FIELD_NAME#_!}
2008-09-05 13:01:34,625 [SAPEngine_Application_Thread[impl:3]_8] DEBUG com.virsa.ae.service.cache.AECacheUtil : getResourceBundle :   : INTO the method : en
2008-09-05 13:01:34,625 [SAPEngine_Application_Thread[impl:3]_8] DEBUG com.virsa.ae.service.cache.AECacheUtil : getResourceBundle :   : INTO the method : en
2008-09-05 13:01:34,625 [SAPEngine_Application_Thread[impl:3]_8] DEBUG com.virsa.ae.service.cache.AECacheUtil : getResourceBundle :   : INTO the method : en
2008-09-05 13:01:34,625 [SAPEngine_Application_Thread[impl:3]_8] DEBUG com.virsa.ae.service.cache.AECacheUtil : getResourceBundle :   : INTO the method : en
2008-09-05 13:01:34,625 [SAPEngine_Application_Thread[impl:3]_8] DEBUG com.virsa.ae.service.cache.AECacheUtil : getResourceBundle :   : INTO the method : en
2008-09-05 13:02:28,234 [Thread-47] DEBUG

In Addition to my previous response:
I meant to include the following:
Some of the fields that need to be properly defined with attributes are:
       System: must have the know SAP system defined here
       Role Approver (i presently are using most of the roles without having need for approval; I created a user called NOAPPRV in AE)
       Functional Area: need to have all the areas defined that roles will be assigned to
       Company: I only have one company so that's an easy one
Some areas I presently do not use but found they must ne coded and coded properly:
       ResponsibilityID:   N/A (coded as is)
       CommentsMandatory: NO (coded as is)
       Parent Role Owner:   NO
       Business Process: NA (I believe I originally coded N/A and it did not like that)
       Sub Process: NA (again N/A I believe error on me)
       Reaffirm Period: presently I am using 0 (zero)
       LastReaffirm: presently using 12/31/9999
Hope this helps a bit
I wanted to include an attachment with a sample of my Role Import spreadsheet but I'm not sure exactly how to do that; if I figure that out or someone can provide me the process I will include it
Jerry Synoga
Ryerson Inc.
630-758-2021

Request Approval Process exception in OIM 11g

Hi,
We have upgraded oim 9.1 to oim 11.1.1.5 and we did not have any request approvals in oim 9.1.
Now we are using oim 11g to develop request approval process. We have tried to raise a request for "Provisioning Resource" - Application Access and "Assign Role" - Business Role Request in OIM 11g environment. Both the Requests are failing with the same exception as below,
Error:
IAM-2050014:An error occurred while initiating approvals for request oracle.iam.platform.workflowservice.exception.IAMWorkflowException: Tasklist mapping failed for workflowdefinition: default/DefaultRequestApproval!1.0 due to javax.naming.NamingException: String index out of range: -1. The corresponding error message is {1}.
Any idea on the above error?
Thanks!!

you can follow these videos to see if you can get a basic manager approval working for a self request resource.
http://www.youtube.com/watch?v=KCA_cxKsi_o&feature=channel_video_title

Duet has encountered an error during Approve , Reject Reassign the workflow

Hi,
We have implemented DUET with two scenario (LEMA & WOMA) in our organization. When try Approve , Reject or Reassign the Duet work flow Item Duet has encountered an error . The scenario was working fine earlier. Suddenly the error has start coming. The error is coming in a pop up window. I am attaching the error details from event log.
Event Type:     Error
Event Source:     Duet Diagnostics
Event Category:     None
Event ID:     0
Date:          1/04/2010
Time:          10:49:37 AM
User:          N/A
Computer:     xxxxxxxxxxx001
Description:
Error in Approve/Reject from Approver Mail.
Exception message: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
Method: Close
StackTrace:   at Microsoft.Office.Interop.Outlook._MailItem.Close(OlInspectorClose SaveMode)
   at SAP.Office.Apps.Leave.Outlook.LeaveApproverMailInspectorCodeBehind.AfterOnSelectControl(String name, String param)
     =====Additional Information=====
oba://oba.microsoft.com/outlook?boundItemId=
Bound Item ID:
Bound Item Type:
Correlation ID:
Process Name: C:\PROGRA1\MICROS3\Office12\OUTLOOK.EXE
User Name: xx\99901
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Thanks in advance,
Monirul Islam

HI Monirul,
You can get better advice and help in another forum dedicated to Duet only.
Regards,
Sangvir

Error while approving documents in KM

Hi All,
We have various approval processes set up for various folders. The proper groups and steps are defined. When the user creates a piece of content in the folder, they can click on the command menu or details and submit it for approval. The super content administrator can submit it for approval or skip the approval.
After some time, we are receiving a NullPointerException whenever we try to submit something for approval or skip the approval process. It never gets to UWL. When we look in the logs we see the error below. When we restart the server, we are able to submit for approval and skip with approval without any issues. After some time however, this issue arises again.
The log file shows the following -
#1.5#0014C26354620055000006DA00000B4000040A8ECD7C2BBE#1137508356007#com.sapportals.wcm.rendering.property.PropertyRendererFactory#sap.com/irj#com.sapportals.wcm.rendering.property.PropertyRendererFactory#bkumm24#7737##ptdwas00_EPD_4495551#bkumm24#97718e30876111da89f60014c2635462#SAPEngine_Application_Thread[impl:3]_8##0#0#Warning##Plain###Reloading all classes, because CRT Class Loader was modified.#\par
#1.5#0014C263546200540000088800000B4000040A8ECFDE6BB6#1137508396008#com.sapportals.wcm.rendering.uicommand.UIConfiguration#sap.com/irj#com.sapportals.wcm.rendering.uicommand.UIConfiguration#bkumm24#7737##ptdwas00_EPD_4495551#bkumm24#97718e30876111da89f60014c2635462#SAPEngine_Application_Thread[impl:3]_24##0#0#Warning##Plain###Reloading all classes, because CRT Class Loader was modified.#\par
#1.5#0014C263546200400000090E00000B4000040A8ED190AEC1#1137508424461#com.sapportals.wcm.rendering.uicommand.UIMenuFactory#sap.com/irj#com.sapportals.wcm.rendering.uicommand.UIMenuFactory#bkumm24#7864##ptdwas00_EPD_4495551#bkumm24#7b541bc0876411da96bf0014c2635462#SAPEngine_Application_Thread[impl:3]_20##0#0#Warning##Plain### No group command found for rendering menu HoverMenu for resource ..........
Please help.
Thanks,
vivek
I promise to reward points for helpfull answers

Resubmitting .....
We have various approval processes set up for various
folders. The proper groups and steps are defined.
When the user creates a piece of content in the folder
they can click on the command menu or details and submit
it for approval.
After some time, we are receiving a NullPointerException
whenever we try to submit something for approval or skip
the approval process. It never gets to UWL. When we
look in the logs we see the error below. When we
restart the server, we are able to submit for approval
and skip with approval without any issues. After some
time however, this issue arises again.
The log file shows the following -
#1.5#0014C26354620055000006DA00000B4000040A8ECD7C2BBE#113
7508356007#com.sapportals.wcm.rendering.property.Property
RendererFactory#sap.com/irj#com.sapportals.wcm.rendering.
property.PropertyRendererFactory#bkumm24#7737##ptdwas00_E
PD_4495551#bkumm24#97718e30876111da89f60014c2635462#SAPEn
gine_Application_Thread[impl:3]
_8##0#0#Warning##Plain###Reloading all classes, because
CRT Class Loader was modified.#\par
#1.5#0014C263546200540000088800000B4000040A8ECFDE6BB6#113
7508396008#com.sapportals.wcm.rendering.uicommand.UIConfi
guration#sap.com/irj#com.sapportals.wcm.rendering.uicomma
nd.UIConfiguration#bkumm24#7737##ptdwas00_EPD_4495551#bku
mm24#97718e30876111da89f60014c2635462#SAPEngine_Applicati
on_Thread[impl:3]_24##0#0#Warning##Plain###Reloading all
classes, because CRT Class Loader was modified.#\par
#1.5#0014C263546200400000090E00000B4000040A8ED190AEC1#113
7508424461#com.sapportals.wcm.rendering.uicommand.UIMenuF
actory#sap.com/irj#com.sapportals.wcm.rendering.uicommand
.UIMenuFactory#bkumm24#7864##ptdwas00_EPD_4495551#bkumm24
#7b541bc0876411da96bf0014c2635462#SAPEngine_Application_T
hread[impl:3]_20##0#0#Warning##Plain### No group command
found for rendering menu HoverMenu for resource ..........
Please help.
Thanks,
vivek
I promise to reward points for helpfull answers

ApproverObjects in multi approval process

I am trying to call a multi approval process, but it never sends out any approvals, it just skips out of it. My understanding is that approverObjects needs to passed in which should be The list of approver objects where each approver object contains the approvers name and delegators name(s) if any. I tried to pass in a list with accountId but it didn't work, and it gave me an error. I think its looking for a specific kind of object. Anybody know what should be in that list? Here are the errors:
om.waveset.util.WavesetException: Couldn't find method getApprover() in class java.lang.String java.lang.NoSuchMethodException: java.lang.String.getApprover()
com.waveset.util.WavesetException: Couldn't find method getDelegator() in class java.lang.String java.lang.NoSuchMethodException: java.lang.String.getDelegator()
com.waveset.util.WavesetException: WorkflowServices.getDelegates: missing accountId or accountIdList
com.waveset.util.WavesetException: Action null used unresolved variable approver as an owner name.
thx

Hi,
Please pass list of approver in the argument under "approvers" which contain only account id. Then only it able to get the approver request to the user.
Regards,
vinash

Approval process monitor status turn to "Initiated" instead of "Pending", so awe is not routed

When I submit a transaction, after successful submission in approval process monitor the status has turn "Initiated" instead of "Pending". That's why it's showing "Not Routed" for the next approving person. So that worklist is not populated.
Please suggest me to resolve this issue.
Process Monitor as follows after submission:
Separation Approval Process (Stage)
Initiated (Monitor status)
Approval Routing from Unit HR (Path)
Not Routed    (Step)                                                    Not Routed      (Step)
Multiple Approvers                                                     Multiple Approvers
STATEHR ROLEUSER SEPARATION                              Central Hr
(Userlist)                                                                        (Userlist)

Looking at the error message "The Network Adapter could not establish the connection" , It appears hostname and port may be incorrect. Review the targets.xml under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\emd and
emoms.properties under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\config folder to make sure host ( sap_solman) and port (1527) are correct.
As far as setting the environment variables goes, you can go to control panel -> system -> advanced -> environment variables and set the ORACLE_HOME and ORACLE_SID
-Ramesh

Error in Approval process

Similar Messages

Maybe you are looking for