Error in arithmetic operation
All,
I have the error when loading my data, "error in arithmetic operation".
I am trying to load e.g.:
20030412101100 in a DATS field.
My question:
<b>How can I remove the 6 digits from the right in my transferstructure?</b>
Please guide in steps if possible,
Many thanks!
Andrew
Hi dear,
You can also try SUBSTRING:
Cut out part of a character string.
Parameters
SUBSTRING( <character string>, <offset>, <length> )
Result
Part of a character string
Example
SUBSTRING( 'ABCD', 0, 3 ) = 'ABC'
SUBSTRING( 'ABCD', 2, 2 ) = 'CD'
Hope it help...
Similar Messages
-
Error in arithmetic operation in record
Hi all
when I'm loading from flat file i'm getting the following error
"Error in arithmetic operation in record"
Also one more error is
"Error 8" error
Pl reply with solution asap
Thanks and Regards
ShyamHi Shyam,
Delete Infosource - Source system assignment (with PSA tables etc.).
Then save (activate) the Infosource (communication structure).
Then assign source system, create infopackage and load data again.
Should work fine then.
Sham'm -
Error while doing MIRO-Overflow for arithmetical operation (type P) in prog
Hi ,
I am getting the error while doing the MIRO as below-
Runtime Errors COMPUTE_BCD_OVERFLOW
Exception CX_SY_ARITHMETIC_OVERFLOW
Date and Time 20.05.2009 10:07:03
Short text
Overflow during the arithmetical operation (type P) in program "SAPLMRMC".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLMRMC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_ARITHMETIC_OVERFLOW', was not
caught in
procedure "MRM_AMOUNT_QUANTITY_PROPOSE" "(FUNCTION)", nor was it propagated by
a RAISING clause.
Since the caller of the procedure could not have anticipated that the
Please let me know how can this be removed.Hi,
There can be some problem with tolerances set in the customizing.
In my case, I was getting this error because of delivery date variance. The difference between delivery date maintained in PO and invoice date was huge and hence the multiplication of price of PO and difference of delivery date was huge and that was the reason for error.
Similarly in your case also, there will be some tolerance limit problem.
Please check your tolerance limits set in customizing.
Regards,
Mihir Popat -
Good day
Everytime I want to pull data into a query from our servers it gives the error "DataSource.Error: Arithmetic operation resulted in an overflow". What is the reason for this error, and how do I get past this bump.
Thanks in advance
ArnouxHey Tristan. Thanks I did that yes.
For some reason my direct MySQL connection does not want to work.
I get the following error
DataSource.Error: MySQL: Unable to find a database provider with invariant name 'MySql.Data.MySqlClient'.
This error may have been the result of provider-specific client software being required but missing on this computer. To download client software for this provider, visit the following site and choose at minimum 'MySQL Connector/Net': -
Process chain error:Error in an arithmetic operation in record
Hi friends ,
Plz help me ehow to solve the error: Error in an arithmetic operation in record in process chains when loading IP.
Error in error messages s:
Record 1927 :Contents 1100.00 J from field PSWBT cannot be converted in type CURR -
Record 1927 :Contents 0.00 0 from field BDIF2 cannot be converted in type CURR
Record 1927 :Contents 0.00 0 from field FDWBT cannot be converted in type CURR -
what can i do ?
regards ,
PavanHi pawan,
If you are loading data thru PSA, correct these values in the PSA and reload it again. Best solution would be to correct it in the source system also. If you see the record 1927 in your case has following values for the fields.
PSWBT - 1100.00 J
BDIF - 0.00 0
FDWBT - 0.00 0
You can see the spaces in between as well as the character 'J'.
Hence it is giving you this error.
Correct it in PSA and reload it.
it will go fine...
Regards. -
ODBC BI Server Bug - arithmetic operation resulted in an overflow
I am trying to write some really simple .NET code access the Oracle BI Server ODBC driver and it's not working at all. I've connected fine, however it seems like anything I try to do related to getting database information spits up an error "arithmetic operation resulted in an overflow".
Here is the code:
Dim ConnectString As String
Dim FactoryType As String
Dim Factory As System.Data.Common.DbProviderFactory
Dim Connection As System.Data.Common.DbConnection = Nothing
Dim TablesData As System.Data.DataTable = Nothing
Dim err As String = ""
Dim nl As String = Chr(13) + Chr(10)
Try
' Connect to the database via ODBC
ConnectString = "DSN=BSODBC_7;uid=TheUser10;pwd=************"
FactoryType = "System.Data.Odbc"
Factory = System.Data.Common.DbProviderFactories.GetFactory(FactoryType)
Connection = Factory.CreateConnection
Connection.ConnectionString = ConnectString
Connection.Open()
' Request a list of tables from the database
' ** Tried both with restrictions and without
' ERROR on this line:
' “Arithmetic operation resulted in an overflow.”
TablesData = Connection.GetSchema("Tables")
' Show the list of tables on the screen in a grid
' If it was successful.
OnScreenGrid.AutoGenerateColumns = True
OnScreenGrid.DataSource = TablesData
Catch ex As Exception
' Report the error
err = ex.Message
If Not (ex.InnerException Is Nothing) Then
If Not (ex.InnerException.Message Is Nothing) Then
err = err + nl + nl + ex.InnerException.Message
End If
End If
MsgBox(err, MsgBoxStyle.OkOnly + MsgBoxStyle.Exclamation, "Error")
Finally
' Clean up and Close the DB Connection
If Not (Connection Is Nothing) Then
Connection.Close()
Connection.Dispose()
Connection = Nothing
End If
End Try
Any Thoughts? Is this a known bug? Is there a fix?I doubt on line
OnScreenGrid.DataSource = TablesData
instead of array as TablesData try to take List object and assign it to OnScreenGrid.DataSource
just in case check this
DataGridView.AutoGenerateColumns Property (System.Windows.Forms)
I might be wrong but just check it -
Overflow for arithmetical operation (type P) in program.
Hi experts..
I had developed a report for showing total receipt and issues and confirmed issue.
of PQ.
For all the plant is running fine but only for one plant 2050 its going into dump and error is "Overflow for arithmetical operation (type P) in program." and the code line is
T_EKET-MNG02 = T_EKET-MNG02 * ( t_mdbs-umrez / t_mdbs-umren ).
MNG02 IS OF TYPE Data : "Quan", length =13 , decimal = 3.
initially : value in Mng02 is = 10 and ratio is 11/8 = 1.375
and in the debugging the value is 10*1.375 = 13.75
but... when i am executing it .. its going into dump and after again checking the MNG02 is showing valude --9765133613.881 and the above error.
what should i do....
please help..
i will award the points for every help...
thanksHi,
Are you doing any other calculation for field MNG02 in your program?
I created a small program with the field and values you have mentioned and it gave me the result 13.75 and no short dump.
Please check following things:
When short dump occurs, it shows at which line it has occured. Is it showing that the shortdump has occurs on the line you are talking about here or it is somewhere else.
Also, when shortdump occurs, it shows a "debugging" button at the top. Hit that button and it will show you exactly where the short dump has occured. What ever this statement is, check what are the values of different variables here.
Check all these and you might get the answer. Let me know if you still have problem.
Regards,
RS -
Overflow during the arithmetical operation (type P) in program "SAPLHRPT
Hi,
I am currently facing an issue in payroll posting to accounting in international payroll.A run time error "Overflow during the arithmetical operation (type P) in program "SAPLHRPT" occurs. By reducing the amounts on the balance sheet side payroll posting document is created.Hi Asad,
Does you guys enhancemented this program? I think if it`s standard code, it should give you a error message inform you "amount is too large" or something.
So double click this dump log, to check whether it is a custom code, if yes, to add "TRY CATCH" and give out a message.
regards,
Archer -
Overflow during the arithmetical operation (type P) in program "SAPLV61A
hi,
I am getting this error in VA01(sales order)
Runtime error Compute_bcd_overflow
Except Cx_sy_arithmetic_overflow.
Overflow during the arithmetical operation (type P) in program "SAPLV61A
Error in particular line is.
1388 ADD xkomv-kwert TO komp-mwsbp.
Please give me the solution with detail decsription.How to solve with step by step.Hi,
Instead of directly assigning the value to xkomv-kbetr. Store the value in a temporary variable of type p length 13 decimals 2 . Multiply by 10^n to get the correct result.
Then assign the temp value to xkomv-kbetr.
Sample Code
DATA : lv_temp TYPE P length 13 decimals 2.
lv_temp = ( xkwert * 10^n ) / komp-mgame.
Then assign lv_temp to xkomv-kbetr.
To get proper value, you have to multiply or divide by 10^n .
Regards,
DPM -
Overflow during the arithmetical operation (type P) in program SAPLBBP_FRA
Hi All
I am receieving the following error the moment I log onto the SRM system via the browser.
Overflow during the arithmetical operation (type P) in program SAPLBBP_FRAMEWORK
Please can you advise what could possibly the problem.
Thanks in Advance
Regards
KCHi
<b>Please go through this SAP OSS Note which will definitely help -></b>
Note 857137 - MENUDATA: A "short dump" occurs with several role assignment
<u>Do let me know.</u>
Regards
- Atul -
Arithmetic operations using Picklist field values
Hi,
I tried to multiply a picklist field value as below and wanted to store the result in a field (datatype = Integer or Number) using a workflow which triggers based on the Trigger Event "Before modified record saved".
Criticality = [<plFrequency_of_Occurrence_ITAG>] * 10
It throws an error:
"Update Criticality : Value too long for field 'ZNum_0' (maximum size 16). (SBL-DAT-00235)(SBL-ODS-00500)"
Can't we do arithmetic operations on the Picklist fields? I believe this is because the values are being stored as text??
Do we have a function to convert the character field to numeric before we perform any arithmetic operations?
Thanks,
SriramHi,
You're right, you can't perform arithmetic operations with a number and a text. That's why you get the error.
Today, there's no function you can use to convert a text to a number.
You'll need to create a SR asking for a Change Request.
Regards,
Max -
[nQSError: 22023] An arithmetic operation is being carried out on a non-num
Hi All,
I have created a logical column for rolling period based on a measure. I have used newly created rolling period column to create another column. I have checked the global consistency there were no errors in rpd. I have uploaded the rpd, when I was trying to expand that table in Answers it is giving an error *"State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 22023] An arithmetic operation is being carried out on a non-numeric type. (HY000)"*
The base measure has aggregation rule. Please help to find resolve this issue.
Thanks in advance.Rolling Amount- "PeriodRolling("Core"."Fact - Sales - Orders"."Order Amount" , -10, 0)"
Amount- "case when VALUEOF("No_of_Days"."No_of_days") <= 10 then ( "Core"."Fact - Sales - Orders"."Rolling Amount" / 10) * VALUEOF("No_of_Days"."No_of_days") else "Core"."Fact - Sales - Orders"."Order Amount" / VALUEOF("No_of_Days"."No_of_days") end"
I have created above two measures.
Expand table means we need click on + symbol besides the table name to select columns, it is not allowing me to click on that + sysmbol. -
Using Modulus (%) arithmetic operator with decimals
When trying to use the arithmetic operator modulus with decimals there seem to be some errors in the results. Is there a restriction on the number/value of decimals that can be used with this operator? Am I perhaps just using it incorrectly?
example ...
Double valA= new Double("12.4");
Double valB = new Double("1236");
double result = valB.floatValue() % valA.floatValue();
System.out.println("valB : " + valB );
System.out.println("valA: " + valA);
System.out.println("result : " + result);
produces :
valB : 1236.0
valA : 12.4
result : 8.40003776550293
But :
Double valA= new Double("12.5");
Double valB = new Double("1236");
double result = valB.floatValue() % valA.floatValue();
System.out.println("valB : " + valB );
System.out.println("valA: " + valA);
System.out.println("result : " + result);
produces :
valB : 1236.0
valA : 12.5
result : 11.0Floating point arithmetic in general is not exact. The problem is that you are expecting exact results.
In the second example where you use 12.5 and 1236.0 is just so happens that both of those numbers can be represented exactly, so you do get an exact result. -
MySQL connection and Arithmetic operation resulted in an overflow
Hi
I installed MySQL connector and created a user DSN. In SSIS, a data source connection using ADO Net Source created and I was able to run a simple select statement in preview. But when I run a test transferring data from MYSQL to SQL, I got the following
error.
Error: 0xC0047062 at Data Flow Task, ADO NET Source [59]: System.OverflowException: Arithmetic operation resulted in an overflow.
at System.Data.Odbc.SQLLEN.op_Implicit(SQLLEN value)
at System.Data.Odbc.OdbcDataReader.BuildMetaDataInfo()
at System.Data.Odbc.OdbcDataReader.GetSchemaTable()
at Microsoft.SqlServer.Dts.Pipeline.DataReaderSourceAdapter.PreExecute()
I tested by limiting only 100 records of a single column and it worked. when I changed it to 1000 limits, I get an error.
I am wondering if this has to do with the size of the records. What is going on here?This means you chose a too limiting datatype.
You need to enlarge the one in question, or use a different one that can accommodate greater values.
Arthur My Blog -
Product: BusinessObjects Edge Series 3.0 -- Error 2902. Operation ixfAssemb
Good Afternoon.
I want to upgrade XIR3 to XIR3.1 for enabling IIS+SSO with Active Directory.
But when I want to upgrade my system, I have the Following error:
Product: BusinessObjects Edge Series 3.0 -- Error 2902. Operation ixfAssemblyCopy called out of sequence.
Windows Server 2003 SP2 (Fully Patched)
BusinessObjects Edge Standard XI 3.0 Windows (working)
Patch I want to Install: 51036069.exe ,BusinessObjects Enterprise XI 3.1 FixPack 1.1 - WIN - INTL
Thanks in advance for your helpHi All,
Please clarify my following doubt,
We are migrating from BO 6.5 to BO XI 3.1 intergrating with our application.
I want to use the COM XI 3.1 SDK for the Desktop Intelligence. I did some code changes in the previous 6.5 SDK which we already used.
Say, I changed the LoginAs() method to Logon() in the C++ file.When I tried to create the .dll file using Visual Studio 6.0, I got the following error,
'Logon' is not the member of Application class.
From this message, I understood that, still Application class of BO 6.5 was used and not BO xi and some libraries were also missing.
Please correct me, if my understanding is wrong.
Where can I get the BO xi 3.1 com SDK for DESKI? When searched in SAP portal, I get only the API reference and Developer guides.
Thanks.
Maybe you are looking for
-
Creating user accounts through ARD3 on client machines
Hello. I am trying to create a secondary local admin account on some machines that are running ARD3/OS X 10.4.8. Right now, I am using only one machine as a test before attempting this on the several hundred machines I need to do this on. I used this
-
SOAP Adapter: Connection time out error
Hi Guys, I do it one scenario for Proxy to webservice Asynchronous . I have send the input details through Proxy. In Sxmb_Moni shows success message. But Receiver side doesn't reach the payload. Because receiver side (Soap Adapter) shows
-
How to get Safari back on 10.5.8
Hello, I accidently deleted Safari application and I can't get it back. I tried to download it from the store but I'd only find a version for Snow Leopard. It's being annoying since I use OS 10.5.8. Would be nice if anybody can help me. Thanks!
-
Why will .avi file no longer play?
I had an .avi file saved on my computer, captured from a DV camcorder. I played it fine in Quicktime Pro 7 and used it in Adobe Premiere Pro CS5.5 to edit. Once I was finished with it, I compressed it to a .zip file using the "compress" option in F
-
I have a Mac mini 3.1, can I upgrade to mountain lion ?
hi, can I upgrade my Mac mini 3.1 to run OSS mountain lion ?