Error in AS2 sender communication channel
Hello,
We have a scenario where we are receving IDoc XML from our partner via AS2.
While doing so,we are receiving following error:
Error while parsing AS2 message: AUTHENTICATION_ERROR #
When we try to send a normal text file,it works,so this cannot be a certificate related issue.
XML header looks like:
<?xml version="1.0" encoding="windows-1250"?>
<ORDERS05 xmlns:abc="http://abc.xy.net/">
Kindly help.
Thanks.
Best Regards,
Shweta
Hello,
When I sent the same file from our dev to test system via AS2 ,the content type was application/octet-stream and the file was received successfully.
But when our partner sends it via AS2,content type is application/xml and we get the error I mentioned before.
Does content type has something to do with this problem?
Kindly help.
Thanks a lot.
Regards,
Shweta
Similar Messages
-
Error in AS2 reciever Communication channel
Hi all,
We are working on Idoc to AS2 scenario using SAP PI 7.1. we have installed the certificates provided by the AS2 partner on the PI system and used them in the Reciever agreement. When trying to test this interface, we are getting the following error in AS2 communication channel:
Message-Verarbeitung fehlgeschlagen. Grund: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ediint.edi.EDIMessageException: EDI message composing failed: signature generation failed: signature generation failed: java.security.NoSuchProviderException: provider BC not found., SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ediint.edi.EDIMessageException: EDI message composing failed: signature generation failed: signature generation failed: java.security.NoSuchProviderException: provider BC not found.
Can anyone please help us in resolving this?
Regards
JagruthiHi Jagruti,
I am also looking for the same scenarios with Receiver AS2 adapter on PI 7.1
I have noticed that in my AS2 receiver adaper i am not getting AS2 server details instead the conf is different from previous AS2 adapter.
I am getting below options
channel attribute for RTP
Scurity attribute for RTP etc.
can u pls help me whether anything is missing in deployment why I am not getting other optins.
can u also share any conf doc which u hav
chirag -
AS2 sender communication channel
Hi All,
I have one As2 to proxy scenario, using AS2 sender adapter,PI will be receiving flat file from party and I am performing content conversion in sender As2 channel, there is no mapping involved, and PI is sending this data to SAP system via proxy using integrated configuration.
I have used 2 parties, one sender and one receiver, used 2 business components corresponding to each and one SAP system BC.I have mentioned AS2 ids in both the parties, and did the header mapping for receiver in integrated configuration ->Outbound processing tab.
Now when the file is pushed from AS2 server, there is no log in sender channel monitoring, means the file is not getting picked up from the AS2 server at all.
Can anyone please provide inputs how can we debug this problem.
Thanks,
RuchiHi,
If you are using Seeburger AS2 adapter, then:
1. Check if the URL http://XXXXX:50000/SeeburgerAS2/AS2Server is up. It should show-"405 Method Not Allowed "
2. Check for AS2 messages in Seeburger workbench message-MessageIdStore Monitor
Thanks
Rajeev Gupta -
Error in SOAP Sender Communication Channel
Hello Gurus,
I am trying for a SOAP (Axis) -> PI -> IDOC scenario and getting an error while sending message to SOAP Channel.
Message structure used
<?xml version="1.0" encoding="UTF-8"?>
<MaterialData>
<field1>value</field1>
more fields
</MaterialData>
Basically a XML message.
I am getting below error message for Axis (channel monitoring):
MP: exception caught with cause org.xml.sax.SAXException: Bad envelope tag: MaterialData
Can you please let me know what should be the message format when testing Axis? I do not intend to use any SOAP envelope.
I have already referred: Re: SAP PI 7.0 Receiver SOAP Axis (Bad envelope tag: html)
Please help.
Thank you!Hello,
Can you please let me know what should be the message format when testing Axis? I do not intend to use any SOAP envelope.
Correct me if I'm wrong, but I think you will only be able to plain message to the Axis sender when using REST. See SAP Note 1039369 FAQ XI Axis Adapter, under Sender Adapter General Question 35.
35. Can I post a plain no-soap request (REST) to the sender adapter servlet?
Yes. You need to include a query parameter rest in the request URL, as http://host:port/XIAxisAdapter/MessageServlet?...&rest. For the availability of this feature, refer to Note 1448849.
All the other messages require a SOAP Envelope.
Hope this helps,
Mark -
Error in Mail Sender communicational channel
Hello!
We have an XI scenario, which should take emails from the mail server and transfer them to SAP. For this purpose the configuration channel has been configured with the following params:
Transport protocol: IMAP:
Message protocol: XIPAYLOAD
Configure user authentification: checked.
This channel stopped working about two weeks ago after a kernal patch (notes 1436917, 1441654, 1424397 and 1443925). The error is the following:
exception caught during processing mail message [44]java.lang.ArrayIndexOutOfBoundsException: Array index out of range: 0
Application log gives only this information:
1.5 #16F1003D6202007C00003680001470F4000484907936C6A6#1271655950632#/Applications/ExchangeInfrastructure/AdapterFramework/SAPLibraries/SAPXDK##com.sap.aii.messaging.srt.xmb.XMBIMAPInitiatorServiceImpl.invoke()#J2EE_GUEST#0##bxp45ci_BXP_505494050##91fa4cf04b6e11dfae4616f1003d6202#XI Mail[Mail_Sender_MailFIBeleg/S36_SECURITAS/]_800280##0#0#Error#1#com.sap.aii.messaging.srt.xmb.XMBIMAPInitiatorServiceImpl#Plain###exception caught during processing mail message; java.io.IOException: unexpected list response;
I don't have an access to the Adminiatraion Viewr by now and can't activate any other traces. What is the most interesting - the error is occured only for definite sender, if the email is sent from another address, the processing works without errors.
Do you have any suppositions why could it be so and where should we search the reason of problem?
Your help will be very appreciated.Dear Bond,
Please follow the below useful doc:
http://wiki.sdn.sap.com/wiki/display/XI/CombiningthreedifferentaspectsofPIinoneshot
http://wiki.sdn.sap.com/wiki/display/XI/StepbyStepMailToFileScenario
Thanks,
Satya Kumar -
HI
I am having soap toABAP proxy synchronous interface , when i test from soap UI tool i am getting the below errro . can any body help me with this error
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Body>
<SOAP:Fault>
<faultcode>SOAP:Server</faultcode>
<faultstring>Server Error</faultstring>
<detail>
<s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
<context>XIAdapter</context>
<code>ADAPTER.JAVA_EXCEPTION</code>
<text>com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessagingException: XIProxy:PARSE_APPLICATION_DATA:
at com.sap.aii.adapter.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:1178)
regards
sandeep
Edited by: pendyalas on Jul 27, 2011 5:01 PMHello,
can you check the message format defined in repository.
Regards
Vivek -
AS2 Reciver Communication Channel error
Hi,
I am doing FILE to AS2 ...
I configured the Scenatio with Synchronous MDN , I have Created the Sender for MDN report too..
beow is my Error At AS2 reciver Communication Channel...
Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Failed to get configuration from DTREQUEST and DATABASE.., SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Failed to get configuration from DTREQUEST and DATABASE..
ThanksHi Tom,
This problem comes in SAP PI 7.1 version for resolving you require creation of extra configuration objects u2013
1. A sender AS2 communication channel with protocol as u201Ereports‟
2. A sender agreement using above communication channel.
For more information please refer Article (This will help you in configuring extra objects)
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d095b2df-9fa3-2d10-568b-d12d99828c33?quicklink=index&overridelayout=true
Regards,
Vikrant -
Sender Communication Channel Error
Hi all,
iam working on JDBC scenario.For this iam using party and business service.
iam getting following error at jdbc sender communication channel.
Error occurred while sending message: com.sap.aii.af.ra.ms.api.ConfigException: SLDAccess set to true, but not available.
Erlier it worked fine.But now iam getting this problem.
We are having some other channels which r working fine.
any ideas......?
Thanks,
Sreedhar Goud.1. If you know the user, who having admin rights;
1.Open the VA tool; ex: C:\usr\sap\X67\JC01\j2ee\admin --> click on "go.bat"
2. Click on "New" button ( this is on Logon Dialog box)
3. Enter "Display name"; and select "Direct Connection To a Dispatcher Node".
4. Say "Next"
5. Enter "User Name","Host" and "Port" and Save the data.
6. Select User and click on "Connect"
2. Did you forget the J2EE_ADMIN password? Just follow below steps:
Just follow below steps:
1.Start the Config Tool C:\usr\sap\<SID>\<engine-instance>\j2ee\configtool\configtool.bat
Ex: D:\usr\sap\F02\JC00\j2ee\configtool --> configtool.bat
2. "Switch to configuration mode" for that Click on "Pencil" icon;
3. Click on "Pencil" icon means "Swith to Configuration Edit mode" then say "YES"
4. cluster_data --> server --> cfg --> services -->
click on "Propertysheet com.sap.security.core.ume.service
select properties:
ume.superadmin.activated = True
ume.superadmin.password = <enter password >
then say "OK"
Click on "Pencial ICON.
5. Save & restart Java Engine.
Login with "Administrator"
1. http://<host>:<Port>/useradmin/index.jsp
2. Enter userid / Password as "Administrator / <password>
3. it will ask change password just change it.
Please follow steps one by one. it should resolve your issue. -
BIC Module Error in Sender Communication channel for EDI to File scenario.
Hi Experts,
We are working on the EDI based scenarion where EDI files come to SAP PI from partner and then through Split 997 Adapter Func Ack is sent back to the Partner . But we are facing a issue in our sender Communication Channel which is a File Adapter Channel and uses BIC Module for the conversion of EDI to XML .Request if any one can provide any guidance on the below issue coming in sender CC.
Error: Error in BICMODULE-module:Temporary error: BIC XI Adapter call failed. Reason: 2 errors occured. First error: EdiSegmentData read(): Edifact Format not correct : segment must end with \"segment delimiter\" (Segment : ISA). DESCRIPTION: EdiSegmentData Error: Your Edifact Format is incorrect the segment must end with \"segment delimiter\". check segment [not specified]. Last error: InhouseDocReader moveNext(): com.seeburger.jucon.dochandler.AnsiX12DocReader, offset[92(read Segment : ISA)]: could not parse segment (wrong format): EdiSegmentData: Edifact Format not correct : segment must end with "segment delimiter" (Segment : ISA) DESCRIPTION: InhouseDocReader Error: [not specified] at position [not specified] could not parse the segment [not specified] Error while reading description - wrong format.
Thanks & Regards,
AbhishekHi Abhishek,
Is there any special character present in the EDI file?
the parser is not able to parse the data.
you can check the BIC conversion log for more information.
Regards,
Harish -
Error in sender communication channel
Hi,
I am doing File to RFC scenario in which i am using Standard bapi to get the cost from the sap system
while sending the data in sender communication channel the processing mode is in delete mode but it is not deleting and throwing the error
Error: com.sap.aii.af.service.util.transaction.api.TxManagerException: Unable to roll back transaction: com.sap.engine.services.ts.exceptions.BaseIllegalStateException
this error is from sender communciation channel..
can any one give some inputs for this...
regards,
KishoreK.P.N.,
i have checked it getting the same error. in moni also administrative cache clear error is coming
do we need to do any workaround...
regards
Kishore -
Sender Communication Channel Monitoring Error
Hi....Experts,
i am doing rfc-soap scenario synchronous . this is B2B scenario, under party i created business services, under this created 2 communication channels. in RWB, Communication Channel monitoring i am getting this error at sender side..
Error in processing caused by: com.sap.aii.af.rfc.afcommunication.RfcAFWException: only partyless services are supported but party : xxxxx is set for service sender business service name and sender CC name..
pls suggest me how can i rectify these errors..
for helpful answers i will give points*********
regards,
Pasi.
Edited by: pasi s on May 5, 2008 8:35 AM
Edited by: pasi s on May 5, 2008 8:40 AMHi Pasi,
Check if you are using the same business service (under which u have created the Channels) at sender side in configuration.
You have to use the same business serivce for sender under which your communication channels are created...................
Or
Create a sender communication channel in the service that u have used at sender side.............
So i think in your case there is a mismatch of using the diff sender service at diff stages.............
Hope this will solve your problem
Thanks
Sai
PS: kindly reward points if helpful -
Sender communication channel stopped after error "Connection Timed Out"
Hi experts,
in our scenario we have an asyncronous sender communication channel with polling every 6 seconds to an external FTP server.
Yesterday evening a "Connection Timed Out" error came.
After this error the polling stopped but channel in communication channel monitoring still remains green.
So status green but no polling.
To solve this problem we stopped and then restarted channel from CC monitoring.
The channel is configured "manually".
The question is: Is it possible to avoid this problem? Maybe there's a parameter in configuration to set?
After a time out error the channel must go on polling, it should not stop. Or it must shows red status.
Thanks
Fabio BoniHI,
I think PI level is "SAP J2EE Engine 7.00 PatchLevel 109886.44"
Thanks
Fabio -
Adapter Module not working in Sender Communication Channel working in recie
Hi
I have written one adapter module. IF i give that Adapter Module in Sender Communication channel its not working. If i give that in Reciever Communication Channel its working. If i mention in both the channels then its working in sender communication channel also.But in only sender communication channel its not working in only reciever communication channel its working Can any one tell me why its happening
Thanks & Regards
Ravi Shankar B
Message was edited by:
RaviShankar B
Message was edited by:
RaviShankar B
Message was edited by:
RaviShankar Bhi
if its problem with my code why its working if i give the adapter module in both the communication channels?If i give in only sender communication channel the module is not invoking. its not showing any auditlogs.Can any one please help me
OUTBOUND is for sender
INBOUND is for reciever right.?
the following code i have written
public ModuleData process(
ModuleContext moduleContext,
ModuleData inputModuleData)
throws ModuleException {
String SIGNATURE =
"process(ModuleContext moduleContext, ModuleData inputModuleData)";
Object obj = null;
Message msg = null;
String filename = null;
AuditMessageKey amk = null;
try {
obj = inputModuleData.getPrincipalData();
msg = (Message) obj;
System.out.println("&&&&&&&&&&&&&&&&&" + msg);
if (msg.getMessageDirection().equals(MessageDirection.OUTBOUND)){
amk = new AuditMessageKey(msg.getMessageId(),AuditDirection.OUTBOUND);
Audit.addAuditLogEntry(amk,AuditLogStatus.SUCCESS,">>>>>>>>>>>>>>> etHostName: Module called"+ i++);
}else{
File filename1 = new File("
10.7.1.43
XI
source","text.txt");
filename1.createNewFile();
amk = new AuditMessageKey(msg.getMessageId(),AuditDirection.INBOUND);
Audit.addAuditLogEntry(amk,AuditLogStatus.SUCCESS,">>>>>>>>>>>>>>> etHostName: Module called"+ i++);
System.out.println("**************" + amk + "***********");
} catch (Exception e) {
Audit.addAuditLogEntry(amk,AuditLogStatus.SUCCESS,">>>>>>>>>>>>>>> GetHostName: Error Module called");
e.printStackTrace(System.err);
ModuleException me = new ModuleException(e);
throw me;
// Read the channel ID, channel and the module configuration
try {
Hashtable mp = (Hashtable)inputModuleData.getSupplementalData("module.parameters");
if(mp != null){
filename = (String)mp.get("FileName");
Audit.addAuditLogEntry(amk,AuditLogStatus.SUCCESS,"Host >>> Element Name is set to {0}"+filename );
}else{
Audit.addAuditLogEntry(amk,AuditLogStatus.WARNING,"HostElementName parameter is not set. Default used: HostName.");
filename = "FileName";
} catch (Exception e) {
e.printStackTrace(System.err);
Audit.addAuditLogEntry(amk,AuditLogStatus.ERROR,"Cannot read the module context and configuration data");
ModuleException me = new ModuleException(e);
throw me;
try {
XMLPayload xmlpayload = msg.getDocument();
DocumentBuilderFactory factory;
factory = DocumentBuilderFactory.newInstance();
DocumentBuilder builder = factory.newDocumentBuilder();
Document document =
builder.parse((InputStream) xmlpayload.getInputStream());
Element rootNode = document.getDocumentElement();
if (rootNode != null) {
Element childElement = document.createElement("filename");
childElement.appendChild(document.createTextNode(filename));
rootNode.appendChild(childElement);
// Transforming the DOM object to Stream object.
TransformerFactory tfactory = TransformerFactory.newInstance();
Transformer transformer = tfactory.newTransformer();
Source src = new DOMSource(document);
ByteArrayOutputStream myBytes = new ByteArrayOutputStream();
Result dest = new StreamResult(myBytes);
transformer.transform(src, dest);
byte[] docContent = myBytes.toByteArray();
if (docContent != null) {
xmlpayload.setContent(docContent);
inputModuleData.setPrincipalData(msg);
} catch (Exception e) {
e.printStackTrace(System.err);
Audit.addAuditLogEntry(amk,AuditLogStatus.ERROR,"Cannot read the module context and configuration data");
ModuleException me = new ModuleException(e);
throw me;
return inputModuleData;
Best Regards
Ravi Shankar B
Message was edited by:
RaviShankar B
Message was edited by:
RaviShankar B -
JMS Sender Communication Channel problem
Hi XI gurus!!
I have a JMS Sender Communication Channel that cannot get information from JMS TIBCO queue.
In defaultTrace.XX.trc I see the following information and errors:
#1.#00144F249F1500C70000087D00002D8300044A22A193A198#1207412506993#com.sap.aii.adapter.jms.core.connector.ConnectorImpl#sap.com/com.sap.xi.mdt#com.sap.aii.adapter.jms.core.connector.ConnectorImpl.buildConnection()#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#SAPEngine_Application_Thread[impl:3]_52##0#0#Path##Plain###Exiting method#
#1.#00144F249F1500C70000087E00002D8300044A22A193A201#1207412506993#com.sap.aii.adapter.jms.core.connector.ConnectorImpl#sap.com/com.sap.xi.mdt#com.sap.aii.adapter.jms.core.connector.ConnectorImpl.buildSessions()#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#SAPEngine_Application_Thread[impl:3]_52##0#0#Path##Plain###Entering method#
#1.#00144F249F1500C70000087F00002D8300044A22A193A552#1207412506993#System.err#sap.com/com.sap.xi.mdt#System.err#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#SAPEngine_Application_Thread[impl:3]_52##0#0#Error##Plain###2008-04-05 17:21:46 [161906789 SAPEngine_Application_Thread[impl:3]_52] [TIBCO EMS]: createQueueSession qsess=198151 qconn=45502 tran=true ackmode=1#
#1.#00144F249F1500C70000088000002D8300044A22A193A670#1207412506994#com.sap.aii.adapter.jms.core.connector.ConnectorImpl#sap.com/com.sap.xi.mdt#com.sap.aii.adapter.jms.core.connector.ConnectorImpl.buildSessions()#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#SAPEngine_Application_Thread[impl:3]_52##0#0#Info##Java###Sucessfully created session {0} for profile {1}#2#com.tibco.tibjms.TibjmsQueueSession@3a5f233#
{GenericConnectionProfileImpl
{Description=ConnectionProfile of channel: JMS_Sender_loginCheckReq_001on node: 21291150 having object id: 7e7ee107bc2031d2bc79fa2fce15bbed,
JmsMessageSelector=,
ConnectionFactoryConstructor=null,
ConnectionFactoryFactoryInvocation=null,
ConnectionFactoryInvocations=[],
DestinationConstructor=
{ConstructorInvocation
{className=null,
invokeParams=[]
DestinationInvocations=[],
MessageInvocations=[],
DestinationName=null,
User=,
Password=,
isJmsSessionTransacted=true,
InitialContextEnvironment={java.naming.provider.url=190.10.0.133:9222, java.naming.factory.initial=com.tibco.tibjms.naming.TibjmsInitialContextFactory},
LookupConnectionFactory=QueueConnectionFactory,
LookupDestination=GALP.PRD.TIGERC.LOGIN.REQ,
SerializedConnectionFactoryPath=null,
SerializedDestinationPath=null,
Flags=0000000000000000000000000000000000000000000000000000100000000010
#1.#00144F249F1500C70000088100002D8300044A22A193A7EE#1207412506994#com.sap.aii.adapter.jms.core.connector.ConnectorImpl#sap.com/com.sap.xi.mdt#com.sap.aii.adapter.jms.core.connector.ConnectorImpl.buildSessions()#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#SAPEngine_Application_Thread[impl:3]_52##0#0#Path##Plain###Exiting method#
#1.#00144F249F1500C70000088200002D8300044A22A193A85F#1207412506994#com.sap.aii.adapter.jms.core.connector.JndiConnectorImpl#sap.com/com.sap.xi.mdt#com.sap.aii.adapter.jms.core.connector.JndiConnectorImpl.createDestination()#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#SAPEngine_Application_Thread[impl:3]_52##0#0#Path##Plain###Entering method#
#1.#00144F249F1500C70000088300002D8300044A22A193B153#1207412506997#System.err#sap.com/com.sap.xi.mdt#System.err#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#SAPEngine_Application_Thread[impl:3]_52##0#0#Error##Plain###2008-04-05 17:21:46 [161906789 SAPEngine_Application_Thread[impl:3]_52] [TIBCO EMS]: createQueueConnection qconn=45503 qconfac=QueueConnectionFactory[url=tcp://190.10.0.133:9222;clientID=null;Properties={}] user=null#
#1.#00144F249F1500C70000088400002D8300044A22A193E3CF#1207412507009#com.sap.aii.adapter.jms.core.connector.JndiConnectorImpl#sap.com/com.sap.xi.mdt#com.sap.aii.adapter.jms.core.connector.JndiConnectorImpl.createDestination()#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#SAPEngine_Application_Thread[impl:3]_52##0#0#Path##Plain###Exiting method#
#1.#00144F249F1500C70000088500002D8300044A22A193E571#1207412507010#com.sap.aii.adapter.jms.core.connector.ConnectorImpl#sap.com/com.sap.xi.mdt#com.sap.aii.adapter.jms.core.connector.ConnectorImpl.executeDestinationInvocations#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#SAPEngine_Application_Thread[impl:3]_52##0#0#Path##Plain###Entering method#
#1.#00144F249F1500C70000088600002D8300044A22A193E64B#1207412507010#com.sap.aii.adapter.jms.core.connector.ConnectorImpl#sap.com/com.sap.xi.mdt#com.sap.aii.adapter.jms.core.connector.ConnectorImpl.executeDestinationInvocations#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#SAPEngine_Application_Thread[impl:3]_52##0#0#Path##Plain###Exiting method#
#1.#00144F249F1500C70000088700002D8300044A22A193E714#1207412507010#com.sap.aii.adapter.jms.core.connector.ConnectorImpl#sap.com/com.sap.xi.mdt#com.sap.aii.adapter.jms.core.connector.ConnectorImpl.buildMessageProducers()#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#SAPEngine_Application_Thread[impl:3]_52##0#0#Path##Plain###Entering method#
#1.#00144F249F1508770000000000002D8300044A22A83A6308#1207412618584#System.err#sap.com/com.sap.xi.mdt#System.err#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#Thread[TIBCO EMS TCPLink Reader (45502),5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error##Plain###2008-04-05 17:23:38 [2092826462 TIBCO EMS TCPLink Reader (45502)] [TIBCO EMS]: received msg from daemon conn=45502 seqid=40664365 msgid=ID:EMS-SERVER.91446ECB042B480:12545#
#1.#00144F249F1508770000000100002D8300044A22A83A650C#1207412618585#System.err#sap.com/com.sap.xi.mdt#System.err#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#Thread[TIBCO EMS TCPLink Reader (45502),5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error##Plain###2008-04-05 17:23:38 [2092826462 TIBCO EMS TCPLink Reader (45502)] [TIBCO EMS]: post msg to session sess=198151 cons=261547 seqid=40664365 msgid=ID:EMS-SERVER.91446ECB042B480:12545#
In the last two lines we can see that SAP XI do a connection to TIBCO and is getting an unknown error, even in debug (note 856346) I cannot get any information.
Actually we are running SAP XI 3.0 SP21, but this was working fine in SAP XI 3.0 SP17. We have more than 100 Communication Channels working fine and only is having this strange behavior.
BTW if we put manually information in TIBCO QUEUE it works fine, but automatically doesn't pick the message.
ThanksHI,
As per the trace details given please consider few of the below options....
What do u see in adapter monitoring tool for JMS adapter?
http://hostname:5XX00/mdt/amtServlet
Did you follow the document on correlation of JMS messages?
In communication channel You have to set
Correlation ID -> XI conversationID
XI message ID->GUID
XI Conversation ID -> JMS correlation ID.
Now in the custom J2EE application you should set
jmscorrelationid of message before sending in to queue to jms correlation id of message before receiving from the queue.
This thread deals with the issue..
JMS Queue monitoring
Check if the JMS Sender adapter EOIO is with serialized messages
Thanks
Swarup -
JMS sender communication channel content conversion
Hi,
I struck with the content conversion in the JMS Sender communication channel.
I have configured the communication channel with the filed fixed lengths. (Simple type)
The field fixed lengths i have given are 10,2,3,11
The contents in the file 1000000072 230 111
but, in the input xml after conversion iam getting 100000007 in the first field and 2 in the second field 23 in the third field.
I have configured the sender communication channel as in the document in SDN.
Even, i configured several communication channels. I didn't get this strange error any time.
I have gone through SDN to fix this issue, but i didn't get solution.
If anyone got rectified this kind of error, please answer your solution to me
Thanking you,
Regards,
Krishnaraju.Hi,
Thanks for all your support. The issue got resolved.
The issue is due to the file, In the file the special characters are appearing. We are not able to see these characters in the notepad, wordpad, text editor.
But, these characters are appearing in th syn text editor. So, we removed those characters and processessed the file. Now, it is successfull.
Regards,
Krishnaraju.
Maybe you are looking for
-
Hi all, I faced a problem now, the requirement is for Electronic Bank Statement purpose when i run the f110, the system automatically pick up the open items according to the vendor numbers. here client wants to pickup certain amount limit. how is thi
-
Hi, We have created one Cost Center AAA under production group. Before post the documents we have deleted AAA cost center. It is showing Red Mark symbol in OKEON(Cost Center Standard Heirarchy). After we have created AAA(same code deleted cost center
-
My imovie '11 when i put a transparent video in picture in picture and it dosnt show or play
My imovie '11 when i put a transparent video in picture in picture and it dosnt show or play. Help Please
-
Problem using jdk included with JDEV9i
I am trying to use jdk supplied with jdev9i release candidate 2 on my system (win 98).I have included c:\jde9i\jdk\bin in my system's path and c:\jdev9i\jdk\lib in my class path. But when I invoke compiler using javac it prints a long error message ,
-
Downloading iTunes 11 difficulty?
I am having problems installing my itunes set up. It goes all the way but at the very end i get this message "Errors occurred during installation before iTunes could be configured. Your system has not been modified. To complete the installation, ru