Error in AS91: E698 SYST: Abnormal termination

Hi,
I am getting a error while creating legacy asset in AS91.
E698 SYST: Abnormal termination (ANLB-LGJAN 1 not equal to ANLC-GJAHR),
I guess this error relates to fiscal year., my closed fiscal year is 2008 (from OAAQ),
and the take over date is 01.04.2008.
If i have to transfer all assets as of 31.03.2008 into sap system, what should be my
transfer date? and which fiscal year should be open?
Regards,
Khan

Hi Khan,
In addition, to the already made points maybe you can also check the following:
Also, is the actual system date in the same year as your last open fiscal year in FI-AA?
(e.g. last open fiscal year in T093C-LGJAHR is 2009 but actual system date is in year 2010).
In this case you should start the fiscal year change report (RAJAWE00) to open F.Y. 2010 to avoid the error.
For error AA698 not to appear you should close the fiscal years for which ANLC records do not exist.
Regards,
Brigitte

Similar Messages

SYST: Abnormal termination (ANLB-LGJAN not equal to ANLC-GJAHR)

Hi All
An asset got scrapped in 2009 and having an unplanned depn value for $100 which resultedi n negative NBV of -100.
This is impact closing of 2009 and opening 2011,
I am trying to post Manual depn (TT 640) in dec 2010 dated, but getting below error :
"SYST: Abnormal termination (ANLB-LGJAN not equal to ANLC-GJAHR) Asset NL010000002004510000
Internal tables ANLB-LGJAN and ANLC-GJAHR of asset NL010000002004510000 are not synchronous
I checked SDN and below listed message is similar to my error, but i am not able to understand much of the below message, m y understanding is there is no FY 2010 in table ANLC which is causing this error.
Could clarify on what steps needs to be done ?
How to syncronize ANLB-LGJAN and ANLC-GJAHR

Hi Aravind,
most of the time it is one of the following reasons from the link you have found.
another link with examples: Error AS02 AA 698 - SYST: Abnormal termination (T_ANLB not equal to T_ANLC)
1) Are the table fields T093C-LGJAHR, ANLB-LGJAN and ANLC-GJAHR in line
Example for a inconsistency:
T093C-LGJAHR: 2010
ANLB-LGJAN and ANLC-GJAHR: 2009
Solution: Repeat fiscal year change
2) Is table-field T082AVIEWB-AUTHORITY on 0 instead on 2
Example:
MANDT FIAA_VIEW AFAPL AFABER AUTHORITY
100..... . 01..... . ABC ..... . 01..... . 2
100..... . 01..... . ABC ..... . 02 ..... . 2
100..... . 01..... . ABC ..... . 15..... . 2
100 ..... . 01..... . ABC ..... . 20..... . 2
100..... . 01..... . ABC ..... . 30 ..... . 2
100..... . 01..... . ABC ..... . 34..... . 2
100..... . 01..... . ABC ..... . 35..... . 2
100..... . 01..... . ABC ..... . 37..... . 0 set to 2
Solution:
In note 900767 you find the report RACORR_VIEW0_SET to correct this.
3) Have ANLB and ANLC the same number of areas
Example:
ANLB has areas 01, 02, 03.
ANLB has areas 01, 02, 03 and 10
Solution in that case would be not that easy
regards Bernhard

SYST: Abnormal termination (T_ANLB not equal to T_ANLC)

Dear All,
I have seen that this topic has already discussed here for several times but i could not find my case.
When I try to change fiscal year, I get error message that some assets are not complete. I try to change the asset from as02 but I get the following error :
SYST: Abnormal termination (T_ANLB not equal to T_ANLC)
Message no. AA698
Internal tables T_ANLB and T_ANLC of asset are not synchronous.
When I analysed table ANLC I saw that expired useful life is filled with values, but I can not see these values in AS02. Maybe this is the cause for problem but I could not find a solution yet.
I also checked fiscal years in these tables but they are the same.
Does anybody encountered and solved this kind of problem?
Best regards

Hi,
I might ask you to check if the following link is useful for you.
Error AS02 AA 698 - SYST: Abnormal termination ... | SCN
best regards Bernhard

Error in AS91

Dear SAP Gurus,
I am facing problem while creating the legacy asset, when i click takeover values,
system displaying the following error message.
E698 SYST: Abnormal termination (ANLB-LGJAN 1 not equal to ANLC-GJAHR
Following information/settings I made
1. OAAQ- 2009
2 Transfer Date = 31.01.2011
3. Cutover Date = 01.02.2011
4. Last Depreciation posted =2010 10
5.Fiscal year runs from April to March.
Any solutions will be greatly appreciated.
Thanks in advance.
Regards
Nikhil

Dear sarnanikhil
Incosistency in table ANLC and ANLB may occur sometime when asset retireent date is deleted from asset master data. If this is the case then SAP Note 741658 is relevant for your issue. Please check the detail of note and accordingly proceed if it is applicable to your system.
Thanks!!!
Murlidhar Khatri

Error while AS91

Hello Friends,
I am facing problem while creating the legacy asset, system displaying the following error message.
Asset INTERN-00001 0 Furniture & Fixtures(Legacy) CoCd. 1000
E698 SYST: Abnormal termination (ANLB-LGJAN 1 not equal to ANLC-GJAHR
I have done the following activities aswell.
1. AJRW(2009)
2. AJAB(2008)
3. Legacy Transfer date(31.12.2008)
What could be done additionally to resolve this issue?
I need your help
Rgds
Swapna

Dear Zubin,
Thanks for the prompt reply.
I have already checked the checks which you have given.
AJAB(Closed fiscal year 2008)
AJRW(Fiscal year change for 2009)
Asset data transfer date maintained as(31.12.2008)
All Periods closed for 2008 in OB52
Now i am trying to post a legacy asset through AS91, there i have given asset capitalization date as 02.07.2008 and assigned a cost center which is valid from 01.01.2000.
are there any other issues?
Need your help.
Rgds
Swapna

Abnormal Termination (ANLB-LGJAN 1 not equal to ANLC-GJAHR 2) Asset 1000000

Hi,
While we are doing MIGO, we are getting an error message - SYST: Abnormal Termination (ANLB-LGJAN 1 not equal to ANLC-GJAHR 2) Asset 10000000007003170000
also getting same error in ML81N..
Please guide..

Hi Anil,
Please check table ANLC-GJAHR, ANLB-LGJAN and T093C-LGJAHR.
The latest value in these 3 fields should be consistent, which means they are in the current fiscal year.
If they are inconsistent (usually ANLC/ANLB < T093C) please run fiscal year change to correct.
- RAJAWE00: fiscal year change (T-cd:AJRW)
I hope that this resolves your inquiry.
Best Regards,
Vanessa Barth.

Ifrun60_dump_10036 ERROR: Abnormal termination, Error Code: C0000005 ACCESS

Hi All,
I'm getting the following error mssage. Please help me to resolve this issue.
Client Status [ConnId=0, PID=10336]
>> ERROR: Abnormal termination, Error Code: C0000005 ACCESS_VIOLATION
======================= STACK DUMP =======================
Fault address: 5DF18207 01:00027207
Module: D:\OraFrm6i\BIN\ifr60.dll
System Information:
Operating System: Windows NT Version 5.2 Build 3790 Service Pack 1
Command line: D:\OraFrm6i\BIN\IFRUN60.EXE D:\contrmgr\dev\forms6\login.fmx
FORM/BLOCK/FIELD: MASS_BC_UPDATE:CONTRACTS_LIST.LOAD_DATE
Last Trigger: WHEN-MOUSE-DOWN - (Successfully Completed)
Msg: <NULL>
Last Builtin: SET_ITEM_PROPERTY/SET_FIELD - (Successfully Completed)
Registers:
EAX:00000062
EBX:02DCCD38
ECX:0000022C
EDX:02B8A44C
ESI:02DD014C
EDI:0234D8E0
CS:EIP:001B:5DF18207
SS:ESP:0023:0012E854 EBP:0012E86C
DS:0023 ES:0023 FS:003B GS:0000
Flags:00000202
------------------- Call Stack Trace ---------------------
Frameptr RetAddr Param#1 Param#2 Param#3 Param#4 Function Name
0x0012e86c 5deffed5 0234d8e0 00000026 02b801a8 00000008 0x5df18207
0x0012e8ac 5df2ae98 0234d8e0 02c5fcd8 02dccd38 00000008 0x5deffed5
0x0012e8f8 5df2acaa 0234d8e0 02c602d4 02b97530 00000001 0x5df2ae98
0x0012e920 5df0b382 02342780 02dccd38 02b97530 00000001 0x5df2acaa
0x0012e95c 5df1e978 0234d8e0 00000000 00000001 02dccd38 0x5df0b382
0x0012e9a0 5df1df4f 02dccd38 02c5ebf8 02c5f878 0234d8e0 0x5df1e978
0x0012e9d0 5df1d8fd 023832fc 02c5f878 02b8a8ec 0234d8e0 0x5df1df4f
0x0012e9f8 5df1cb3a 023832fc 02b8a8ec 00000000 0234d8e0 0x5df1d8fd
0x0012ea48 5defa297 00000000 00000000 0012ea80 00000000 0x5df1cb3a
0x0012eab0 5def9e87 02dc5db8 02381e88 00a00000 00000001 0x5defa297
0x0012eae8 5def7db6 00000000 02381e88 00a00000 00000001 0x5def9e87
0x0012ee20 5def5e42 023af1bc 00000000 029c53b0 0234d8e0 0x5def7db6
0x0012f190 5df1c50f 0234d8e0 00000001 023af1bc 0234d8e0 0x5def5e42
0x0012f1e0 5df1ae25 023b0c28 00000001 023af1bc 0234d8e0 0x5df1c50f
0x0012f278 5df1acd0 029c51fc 029c51fc 0234d8e0 023af1bc 0x5df1ae25
0x0012f29c 5df1e7be 029c53b0 00000000 029c51fc 0234d8e0 0x5df1acd0
0x0012f2dc 5df1df4f 029c51fc 023afc28 023afc28 0234d8e0 0x5df1e7be
0x0012f30c 5df1d8fd 023af1bc 023afc28 023afc28 0234d8e0 0x5df1df4f
0x0012f334 5df1cb3a 023af1bc 023afc28 023b34ac 0234d8e0 0x5df1d8fd
0x0012f384 5defa297 00000000 00000000 0012f3bc 00000000 0x5df1cb3a
0x0012f3ec 5def9cc6 029c482c 023447e4 00000000 00000001 0x5defa297
0x0012f508 5def2e15 00000000 023449a4 00000020 02351668 0x5def9cc6
0x0012fd68 5def19e9 00000014 00000000 00000002 012f0b30 0x5def2e15
0x0012fd8c 5def18be 012e2090 00000000 00000000 00000002 0x5def19e9
0x0012fdac 67948973 012e2090 00000000 00000000 00000002 0x5def18be
0x0012fdfc 6794a3b1 012e3624 00403010 00000000 00000002 0x67948973
------------------- End of Stack Trace -------------------
-Regards,
Prashant

Hi there,
At the top of the dump file it states the last successful built in thus
Last Builtin: SET_ITEM_PROPERTY/SET_FIELD - (Successfully Completed)
Perhaps add some messages or run the form in debug to see the exact line of code that terminates the form.

ERROR: Abnormal termination of connection

Hi All,
We recently upgraded to Oracle Forms 6i in character mode, running on HP Unix 11.11. My users frequently crash. The screen changes to just a few characters on the right hand side. There are dump files in the forms directory -- one follows. The error message is Abnormal termination of connection, Error Code: 1
Any clues or hints would be greatly appreciated.
Thanks
Jim Barnhart
[email protected]
/u15/acpt/apps/src/frm: cat f60run_dump_960
[Fri Feb 28 15:49:48 2003 PST]::Client Status [ConnId=0, PID=960]
>> ERROR: Abnormal termination of connection, Error Code: 1
FORM/BLOCK/FIELD: APS070:DETAIL_TRANS.PAYMENT_ID
Last Trigger: WHEN-TIMER-EXPIRED - (Successfully Completed)
Msg: <NULL>
Last Builtin: COPY - (Successfully Completed)
------------- Call Stack Trace [ConnId = 0, ProcId = 960] -------------
calling call entry argument values in hex
location type point (? means dubious value)
------------- End of Call Stack Trace -------------
/u15/acpt/apps/src/frm:

This is probably not Oracle Applications eBusiness Suite forms as 11i uses $ORACLE_HOME/forms60 and R12 uses $ORACLE_HOME/forms.
Since there are backslashes, if you are on Windows, use the following note to enable Dr Watson to capture some stack trace information on crashes:
Default Debugger on Windows NT/2000
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=136627.1

ERROR: Abnormal termination

Hello,
Which possible the cause of the error below?
06/25/07 11:27:34 Hora padrão leste da Am. Sul]::Client Status [ConnId=0, PID=-1709033]
>> ERROR: Abnormal termination, Error Code: C0000005 ACCESS_VIOLATION
======================= STACK DUMP =======================
Fault address: 67238795 01:00077795
Module: C:\ORACLE\DEV6I\BIN\UIW60.DLL
System Information:
Operating System: Windows 98 Version 4.10 Build 2222 A
Command line: "C:\oracle\dev6i\BIN\ifrun60.EXE" x:\NLGESTAO\GE\GE_CONEXAO_VAR.FMX nl/nl@nlprod
FORM/BLOCK/FIELD: CR_CON_CLIENTE:PSPES.COD_GU
Last Trigger: WHEN-VALIDATE-ITEM - (Successfully Completed)
Msg: <NULL>
Last Builtin: NAME_IN - (Successfully Completed)
Registers:
EAX:00000000
EBX:0067B09A
ECX:00000000
EDX:00010000
ESI:000090BE
EDI:0067B050
CS:EIP:0167:67238795
SS:ESP:016F:0067AFF8 EBP:0067B048
DS:016F ES:016F FS:4497 GS:0000
Flags:00010246
------------------- Call Stack Trace ---------------------
Frameptr RetAddr Param#1 Param#2 Param#3 Param#4 Function Name
0x0067b048 bff7363b 00001540 00000046 00000000 0067b0da 0x67238795
0x0067b068 bff94407 43bf90be 000043bf 00000000 bff719b8 0xbff7363b
0x0067b07c 000090b8 0067fe28 bff7186d 909844a7 00000000 0xbff94407
0xbff719b8 00058f64 8d000000 5f042464 3d896466 0000000e 0x000090b8
------------------- End of Stack Trace -------------------

ok, do a complete recompilation of all your sources.
- first the libraries pll or (pll and plx)
- menus
- forms
then restart your application and test test test.
If you don't have further problems, then that was the solution.
a recompilation, as I do it :
for each form :
Ctrl-Shift-K - Compile all
Ctrl-T - Generate
Ctrl-S - Save
that's it
Gerd

Abnormal termination, Error Code: C0000005 ACCESS_VIOLATION (Plz Urgent)

Forms 6i ERROR: Abnormal termination, Error Code: C0000005 ACCESS_VIOLATION
Hi,
I am using Oracle Forms 6i with Oracle 9i database.
Database is intalled on AIX while Forms are running on Windows XP.
When user opens a form and and click on print option in the Action menu to print screen system returned following error and application terminated:
[09/12/05 14:17:14 West Asia Standard Time]::Client Status [ConnId=0, PID=3184]
ERROR: Abnormal termination, Error Code: C0000005 ACCESS_VIOLATION This is urgent as user have to take screen snaps shots for supporting document.
Thanks in advance
Hassan

Hi,
I havn't applied any patch. Only 5 or 8 out of 50 users having this problem.
I have already recompile all the fomrs. But no improvement
Hassan

Forms- ERROR: Abnormal termination, Error Code: C0000005 ACCESS_VIOLATION -

Hi All,
I know that our system is using very old technologies (ie Java version, AS 10g 10R2, IE 8, etc). But due to the nature of the application, we can't upgrade it yet for a lot of both technical & political reasons ( i know some of you guys out there are in the same boat as we do)...
Anyways, given the above, we are having this Oracle 10g Forms issue where it just crashes, crash in a sense that the frmweb.exe just died for some reason ( which we are trying to figure out). I know the best way to find the culprit of this issue is to contact Support but given that our current platform, the support guys will just tell us to b49g3r off and use 11g.... So I was hoping to get some feedback from the general public on how to exactly find the culprit code... We tried a lot of things like, enabling trace from forms level (then run xlate to analyze) but given the "random nature" of the error we cannot capture where the error is coming from, we tried enablign a debug for some users but yields to no access....
Maybe there are some Gurus out there that can help us with our problem. Everytime the frmweb.exe dies, it leaves a trace file something like this:
[02/13/13 11:32:01 AUS Eastern Daylight Time]::Client Status [ConnId=0, PID=12916]
>> ERROR: Abnormal termination, Error Code: C0000005 ACCESS_VIOLATION
======================= STACK DUMP =======================
Fault address: 66453C89 01:00002C89
Module: D:\Apps\oracle\ias\10.1.2\FRPrdHome3\bin\frmw.dll
System Information:
Operating System: Windows NT Version 5.2 Build 3790 Service Pack 2
Command line: frmweb server webfile=HTTP-0,0,1,default,165.142.10.51
FORM/BLOCK/FIELD: VISATMO:VISAT_ANSWERS.<NULL>
Last Trigger: WHEN-VALIDATE-RECORD - (Successfully Completed)
Msg: <NULL>
Last Builtin: NEXT_RECORD - (Successfully Completed)
Registers:
EAX:00000062
EBX:00000008
ECX:00000058
EDX:03E171F8
ESI:04636640
EDI:012BD5D8
CS:EIP:0023:66453C89
SS:ESP:002B:0012B40C EBP:04636390
DS:002B ES:002B FS:0053 GS:002B
Flags:00210202
------------------- Call Stack Trace ---------------------
Frameptr RetAddr Param#1 Param#2 Param#3 Param#4 Function Name
0x04636390 04621a4c 03de287c 00042904 00000000 00000000 0x66453c89
0x04622850 00000000 04580038 00000000 0458003c 00000000 0x04621a4c
0x04580030 004f4d54 00000000 61666564 00746c75 00000000 0x00000000
------------------- End of Stack Trace -------------------
Any forms expert or gurus out there that can help us solve this riddle?
thanks!

Whilst error correcting support may have ended for your Forms version, the product is still covered by sustaining support. The support folks won't tell you to 'b49g3r' off, though they might indeed tell you to start preparing for an 11g upgrade. So they might still be able to help you with this issue with the restriction that they won't be able to get a patch anymore, should your issue be caused by a net yet discovered bug or by a bug which is fixed in 11g. To see your entitlements, check the definition of Sustaining Support in the [url http://www.oracle.com/us/support/library/lifetime-support-middleware-069163.pdf]Lifetime Support (PDF) policies brochure for Middleware.
And have you patched up your environment as per the instructions in Note [url https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=415222.1]415222.1, "Steps to Maintain Oracle Application Server 10g Release 2 (10.1.2"?
Thanks,
EJ

Runtime error. nimxs.exe abnormally terminated by Visual C++ Runtime library

Hello, I installed without a glitch Labview 8.6 evaluation on my notebook (WXP, SP3). I could not launch the software from the outset and keep getting MS Visual C++ Runtime Library Runtime Error about nimxs.exe abnormally terminating the Runtime.
I had not worked with the development software previously. I only had Runtime Engine 7.1 on my computer to work with older VIs that had been working flawlessly. Idi not develop these VIs and had not modified them. I removed the Engine from the computer and rebooted several times to no success. The forum discussions about this kind of error are not pertinent to this problem of installation that has never worked. I tried to disable firewall and antivirus and added nimxs.exe to the firewall's enabled software, again to no success.
Can anyone help? Thanks in advance

Hello David,
it did not help. Since I could not run LabVIEW any time I do not think the database got corrupted. The message (snapshot attached) appears on the computer start up. I would suspect the firewall, but disabling it did not help either.
Petr
Attachments:
Clipboard01.jpg ‏19 KB

When firefox opens it says microsoft visual c++ library runtime error program abnormal termination

when i opens Firefox it takes some time and pop up a small window that shows Microsoft visual c++ library runtime error program need abnormal termination when press OK it get disappeared and causes Firefox termination without loading ,during this time Firefox uses maximum CPU space

These are Screen Shots of what is happening.

Abnormal termination, Error Code: C0000005 ACCESS_VIOLATION

Hi All:
I am using Oracle Database 10g Enterprise Edition Release 10.1.0.2.0
and Developer Forms [32 Bit] Version 6.0.8.23.2.
I have created a menu. When I call this menu in a form and execute this from either Form Builder or Form Run Time, form executed, but immediately closed when I select any Menu option.
I have seen that every time when I tried to execute my form system generate a dump file. I found the following error in this dump file:
[12/19/06 15:54:02 Arab Standard Time]::Client Status [ConnId=0, PID=3048]
>> ERROR: Abnormal termination, Error Code: C0000005 ACCESS_VIOLATION
======================= STACK DUMP =======================
Fault address: 5DEFE333 01:0000D333
Module: C:\orant\BIN\ifr60.dll
System Information:
Operating System: Windows NT Version 5.1 Build 2600 Service Pack 2
Command line: "C:\orant\BIN\ifrun60.EXE" main_purg express/express@orcl
FORM/BLOCK/FIELD: MAIN_PURG:BLOCK2.IPS
Last Trigger: WHEN-NEW-FORM-INSTANCE - (Successfully Completed)
Msg: <NULL>
Last Builtin: GO_ITEM - (Successfully Completed)
Registers:
EAX:00ED2780
EBX:028D2BDC
ECX:00000000
EDX:0012DC08
ESI:00EDD8E0
EDI:00ED2780
CS:EIP:001B:5DEFE333
SS:ESP:0023:0012D900 EBP:0012DBCC
DS:0023 ES:0023 FS:003B GS:0000
Flags:00010212
------------------- Call Stack Trace ---------------------
x0012f1e0 5df1afd5 00f5b27c 00000001 00ee3360 00edd8e0 0x5df1c6bf
0x0012f278 5df1ae80 028d3e98 00000000 00edd8e0 00ee3360 0x5df1afd5
0x0012f29c 5df1e96e 028d41a4 00000000 028d3e98 00edd8e0 0x5df1ae80
0x0012f2dc 5df1e0ff 028d3e98 00f5b25c 00ee4bfc 00edd8e0 0x5df1e96e
0x0012f30c 5df1daad 00ee3360 00ee4bfc 00ee4bfc 00edd8e0 0x5df1e0ff
0x0012f334 5df1ccea 00ee3360 00ee4bfc 00000000 00edd8e0 0x5df1daad
0x0012f384 5defa2d7 00000000 00000001 0012f3bc 00000000 0x5df1ccea
0x0012f3ec 5def9d06 028d2bdc 00ed4604 00000000 00000001 0x5defa2d7
0x0012f508 5def2e51 00000000 00ee19b8 00000009 00ee1728 0x5def9d06
0x0012fd68 5def19e9 00000014 00000000 00000003 01590a40 0x5def2e51
0x0012fd8c 5def18be 00e22090 00000000 00000000 00000003 0x5def19e9
0x0012fdac 67948973 00e22090 00000000 00000000 00000003 0x5def18be
0x0012fdfc 6794a3b1 00e230dc 00403010 00000000 00000003 0x67948973
------------------- End of Stack Trace -------------------
Why this is happening?
Thanks
Hassan

I don't know if the Version 6.0.8.23.2. that you are using is patch 18 ?
If not, maybe you need to upgrade to patch 18 ?
Really not sure here. We are using Oracle 9i database and have no problem with patch 13 of forms 6i. Maybe it has something to do with the menu names ? (names too long or containing a reserve word ?).
Really don't know what else can cause that.

Urgent! Form suddenly hang and then abnormal termination

I'm using Developer 6 on Win98. When I access the forms in runtime, I experienced abnormal termination.
Below is part of dump file which system generated after each abnormal termination:
start here
[05/21/02 14:42:18 China Standard Time]::Client STatus [ConnId=0, PID=xxxxxxx]
ERROR: Abnormal termination, Error Code: C0000005 ACCESS_VIOLATION========================= STACK DUMP ============================
Fault addres: 6723E987 01:0007D987
Module: C:\ORAWIN95\BIN\UIW60
Call stack:
Address Frame
6723E987 0067E3E4 uiwnhpru
67243DC9 0067E494 uiwnzSDIViewWndProc
672446E3 0067E710 uiwnzMswRootWndProc
Please help!! Thanks!!!

There is no subsitution for breaking the problem down.
1) When does this happen
2) What triggers are firing.
3) What code is executing.
4) Does it happen every time.
Also - does it reproduce in a simple case.
Regards
Grant Ronald
Forms Product Management

Error in AS91: E698 SYST: Abnormal termination

Similar Messages

Maybe you are looking for