Error in Asset A/c Determination

Hi all,
I already created asset in Accont determination (111) which is assigned to Asset Class. Now I need to assign GL a/c(222) to DP Acq. in Tcode- OA90. But I am getting an error as below:
"Account 300 not yet defined as reconciliation account in co. code PP"
But i created GL a/c(222) as recon a/c, i did not assigned earlier, now it is not accepting
<b>Case-2:</b>
Due to the above error, i tried to assign another GL a/c (333), but showing error that
"You no longer change the value 222 for the GL a/c"
You tried to change GL a/c 222. However, assets were already created with an a/c determination that includes this a/c.
You can only change GL a/c in the a/c deterination as long as there is no asset that uses this a/c.
If you want to change the a/c, you have to enter a new a/c deterination containing the hange a/c.
URGENT PLEASE
Rgds
sunfico

Hi,
Good morning and greetings,
Please check up the same in OAMK.
Please reward points if found useful
Thanking you
With kindest regards
Ramesh Padmanabhan

Similar Messages

  • Pan And Zoom Overlay Content Generation Error Invalid Asset

    I am attempting to create a Pan AND Zoom overlay, I can get the overlay to work if I choose Pan only, but if I choose Pan AND Zoom and then go to preview, I get the following error: "Content Generation Error: Invalid Asset". Any ideas? I am using V17 of the tools, (the latest before todays update)

    What image file format are you trying to turn into a Pan-and-Zoom overlay?? I encountered this error last night (I found this thread while searching here for "Invalid Asset"), and determined that it was because I had placed a .PSD file. Once I converted the image to JPG, I got it to work.

  • Error "codepage could not be determined for the receiver-system"

    Hi,
    we use the idoc-adapter to send message from mySAP ERP to PI.
    All worked fine.
    So, this morning I have changed the datatype of the messageId from "char" to "int" in mySAP ERP in the customizing menue (install param). So, no message received in SAP PI.
    When I start transction "we05" in mySAPERP" I get the following error:
    "codepage could not be determined for the receiver-system" status 02.
    I have changed the datatyp to "char" but the same probleme
    Can anybody help me please?
    Regards
    Stefan

    This error shouldn't occur unless there is some modification at the OS level codepages.
    Please check the entried in the RFC destination for connecting to the XI system. Unicode settings.
    Regards,
    Prateek

  • Error : Price could not be determined

    Error : For a new plant for a new material its giving error
    *No Price could be determined for material/batch 20002/Plant 5001
    Wht reason could be for this error. while creating an indent

    The price in accounting view, it picks up the moving price automatically need not be entered as per valuation but the problem is itz not picking the price and showing value as 0.00
    This is happening only for new plant. Is there any plant specific setting for material.?????
    The price is being picked up for material in other plants. Itz not getting picked up only for one plant.
    Any solutions plz????

  • I am getting error "Office for Mac has determined that your  product key is not valid." when opening xlsx doc.Till yesterday i was not geting this error

    i am getting error "Office for Mac has determined that your  product key is not valid." when opening xlsx doc.Till yesterday i was not geting this error and was working perfectly fine with my sheet.

    Could be some Disk Corruption, but...
    http://support.microsoft.com/kb/969064

  • System Error: No receiver  could be determined

    Hi,
    When i logged into the portal and click on Time management link which takes you to the time entry application (HRESS_C_CATS),and  the below mentioned message is displayed. "System Error: No receiver  could  be determined ".
    Could you pls let me know why this  error shown.? This error appeared when a functional guy changed the employee profile.
    Any idea how to solve this error?
    Thanks,
    Lakshmi.
    Edited by: Lakshmi Atukury on Feb 13, 2012 7:30 AM

    Check siddarth reply in below thread
    http://forums.sdn.sap.com/thread.jspa?threadID=2135503
    Regards
    Srinivas

  • Error in asset management config area

    Hi
    I got error in asset management configuration area error is ASSERTION_FAILED. How to rectify this error,  if any one knows please post the solution.

    Can you give what you are doing in config and the long error text with error number

  • Error:No receiver could be determined

    Hi Experts,
    While monitoring XML messages, I am getting one error "No receiver could be determined" for sender interface catalogupdatenotification_out. Please let me know how i can maintain receiver for this interface. I am SRM consultant and know very little about PI and we are not having any PI consultant this month.
    Thanks for your help.
    Regards,
    Raj Saini

    Hi Raju
    As you are new go through the below link to understand a simple XI Scenario
    http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/1345
    specific to your error , you need to check why there are no receivers for the inteface , either there are filter conditions in Receiver determination which are not satisfied or your configuration scenario is cofigured in appropiratly ,refer above blogs and try to configure correctly,
    Also for your reference , you can find a lot of information  in the bleow link (may be its lot of information for  you at this stage)
    http://wiki.sdn.sap.com/wiki/display/XI/PI7.0and7.1Mapping-Blogs%2CArticles%2CWiki%2CCodeSamplesandVideos+Collections
    Regards
    $rinvias

  • Error while creating Enhanced Receiver Determination

    Hi,
    My Scenario is File to File and in my scenario i am using Extended Receiver Determination as  per requirement.
    In  Receiver Determination(Extended) even though i am entering Operation Mapping ..an error occured
    Checking advanced receiver determination...
      Enter a mapping
    I thought it is because of Cache refresh ..and i have done it ..But no use..Gettig the same  error...
    Can anyone please tell me where i went wrong??and How to fix this issue??

    I thought it is because of Cache refresh ..and i have done it ..But no use..Gettig the same error...
    did you perform a full cache refresh also? If you have Operation Mapping defined with receiverDetermination as target and if it is activated then there should not be any problem in selecting the same in Receiver Determination?

  • Errors in assets

    friends,
    after running depriciation run successfully, system is showing "  Errors occurred when processing assets. See the Error Log  " in asset balance report 87011963.
    when we go through the errors in assets all are showing the following error message.
    Line item causes scrap value of    199,16 to be violated
    Message no. AA632
    Asset affected: 1XXXXXXXXXX-0
    Diagnosis
    The book value of the asset is below the the cut-off value in the amount of    199,16.
    Procedure
    Check your entries for the amount, transaction type and cut-off value specifications, such as memo value, scrap value or cut-off value percentage rate.
    i am not able to understand the issue, please suggest,
    regards,

    Hi,
    Go to T.code OAYI and check what u have defined as the memo value(retention amount) for each depreciation area/ company code.  This memo value is the amount that is not depreciated, in order to have a memo posting for an asset, which has already exceeded its useful life.  The system reduces the planned annual depreciation in the acquisition year for the asset by the amount of the memo value.
         You can activate or deactivate the memo value by means of an indicator in the asset class, although it has been defined on depreciation area/company code level (this is applies especially to asset classes for low value assets).
    Rgds
    Nikhil

  • Error Deserializing Asset during CSDT Import

    Hi,
    I am trying to import content into a freshly installed web center sites system. I am getting the below error when I try to import few assets. Apparently, the error is displayed only when the asset is dependent on a Media_C asset.
    The exact error which is displayed is:
    Error while importing: Import Error: Error deserializing asset
    com.fatwire.cs.core.realtime.DataException: Error deserializing asset
           at com.fatwire.rest.util.AssetJAXBDeserializer.execute(AssetJAXBDeserializer.java:69)
           at com.fatwire.realtime.DefaultDeserializerImpl.execute(DefaultDeserializerImpl.java:163)
           at com.fatwire.realtime.packager.CSDTUtil._import(CSDTUtil.java:474)
           at com.fatwire.realtime.packager.CSDTUtil.Import(CSDTUtil.java:360)
           at com.fatwire.csdt.service.impl.ImportService.importData(ImportService.java:227)
           at com.fatwire.csdt.service.impl.ImportService.execute(ImportService.java:88)
           at jsp_servlet._jsp._cs_deployed._openmarket._xcelerate._prologactions._publish._csdt.__csdtservice._jspService(__csdtservice.java:223)
           at weblogic.servlet.jsp.JspBase.service(JspBase.java:35)
           at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
           at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
           at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
           at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:184)
           at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:523)
           at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:444)
           at COM.FutureTense.Servlet.ServletRequest.include(ServletRequest.java:1410)
           at COM.FutureTense.Servlet.FRequestObj.include(FRequestObj.java:1429)
           at COM.FutureTense.Servlet.JSPServices.runJSP(JSPServices.java:111)
           at COM.FutureTense.Platform.FileSystem.FILESYSTEMJSPManager.runJSP(FILESYSTEMJSPManager.java:463)
           at COM.FutureTense.Servlet.JSPServices.runJSPObject(JSPServices.java:50)
           at COM.FutureTense.Platform.FileSystem.FILESYSTEMJSPManager$JSPDataFile.run(FILESYSTEMJSPManager.java:190)
           at COM.FutureTense.Common.ContentServer.jspExecute(ContentServer.java:3027)
           at COM.FutureTense.Common.ContentServer.evalTemplate(ContentServer.java:2621)
           at COM.FutureTense.Common.ContentServer.generatePage(ContentServer.java:1640)
           at COM.FutureTense.Common.ContentServer.evalPage(ContentServer.java:1276)
           at COM.FutureTense.Common.ContentServer.execute(ContentServer.java:465)
           at COM.FutureTense.Servlet.FTServlet.execute(FTServlet.java:129)
           at COM.FutureTense.Servlet.FTServlet.doPost(FTServlet.java:62)
           at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
           at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
           at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
           at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
           at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
           at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
           at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
           at com.fatwire.auth.RequestAuthenticationFilter.doFilter(RequestAuthenticationFilter.java:193)
           at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
           at COM.FutureTense.Servlet.URLRewriteFilter.doFilter(URLRewriteFilter.java:82)
           at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
           at com.fatwire.wem.sso.cas.filter.CASFilter.doFilter(CASFilter.java:701)
           at com.fatwire.wem.sso.SSOFilter.doFilter(SSOFilter.java:51)
           at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
           at com.fatwire.cs.ui.framework.UIFilter.doFilter(UIFilter.java:109)
           at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
           at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
           at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
           at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
           at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
           at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
           at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
           at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
           at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
           at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    Caused by: java.lang.NullPointerException
           at com.fatwire.assetapi.data.AssetDataImpl._getParentDef(AssetDataImpl.java:175)
           at com.fatwire.assetapi.data.AssetDataImpl.setParents(AssetDataImpl.java:153)
           at com.fatwire.rest.util.AssetHandler.getAssetData(AssetHandler.java:793)
           at com.fatwire.rest.util.AssetHandler.getAssetData(AssetHandler.java:668)
           at com.fatwire.rest.util.AssetJAXBDeserializer.execute(AssetJAXBDeserializer.java:64)
           at com.fatwire.realtime.DefaultDeserializerImpl.execute(DefaultDeserializerImpl.java:163)
           at com.fatwire.realtime.packager.CSDTUtil._import(CSDTUtil.java:474)
           at com.fatwire.realtime.packager.CSDTUtil.Import(CSDTUtil.java:360)
           at com.fatwire.csdt.service.impl.ImportService.importData(ImportService.java:227)
           at com.fatwire.csdt.service.impl.ImportService.execute(ImportService.java:88)
           at jsp_servlet._jsp._cs_deployed._openmarket._xcelerate._prologactions._publish._csdt.__csdtservice._jspService(__csdtservice.java:223)
           at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
           at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
           at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
           at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
           at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:183)
           at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:523)
           at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:444)
           at COM.FutureTense.Servlet.ServletRequest.include(ServletRequest.java:1410)
           at COM.FutureTense.Servlet.FRequestObj.include(FRequestObj.java:1428)
           at COM.FutureTense.Servlet.JSPServices.runJSP(JSPServices.java:111)
           at COM.FutureTense.Platform.FileSystem.FILESYSTEMJSPManager.runJSP(FILESYSTEMJSPManager.java:463)
           at COM.FutureTense.Servlet.JSPServices.runJSPObject(JSPServices.java:50)
           at COM.FutureTense.Platform.FileSystem.FILESYSTEMJSPManager$JSPDataFile.run(FILESYSTEMJSPManager.java:190)
           at COM.FutureTense.Common.ContentServer.jspExecute(ContentServer.java:3027)
           at COM.FutureTense.Common.ContentServer.evalTemplate(ContentServer.java:2621)
           at COM.FutureTense.Common.ContentServer.generatePage(ContentServer.java:1640)
           at COM.FutureTense.Common.ContentServer.evalPage(ContentServer.java:1276)
           at COM.FutureTense.Common.ContentServer.execute(ContentServer.java:465)
           at COM.FutureTense.Servlet.FTServlet.execute(FTServlet.java:129)
           at COM.FutureTense.Servlet.FTServlet.doPost(FTServlet.java:61)
           at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
           at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
           at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
           at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
           at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
           at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
           at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
           at com.fatwire.auth.RequestAuthenticationFilter.doFilter(RequestAuthenticationFilter.java:193)
           at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
           at COM.FutureTense.Servlet.URLRewriteFilter.doFilter(URLRewriteFilter.java:81)
           at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
           at com.fatwire.wem.sso.cas.filter.CASFilter.doFilter(CASFilter.java:701)
           at com.fatwire.wem.sso.SSOFilter.doFilter(SSOFilter.java:51)
           at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
           at com.fatwire.cs.ui.framework.UIFilter.doFilter(UIFilter.java:108)
           at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    ... 9 more
    If I delete the dependent Media_C asset, it gives an error saying Media_C does not exist in the datastore. I am unable to identify the root cause of this error.
    Any help on this would be great. Thanks in advance.

    Hello,
    Can you create assets manually through a start menu in the target environment?
    I see this error
    Caused by: java.lang.NullPointerException
           at com.fatwire.assetapi.data.AssetDataImpl._getParentDef(AssetDataImpl.java:175)
    Do you find the Content and Parent Definitions is the environment?
    Best regards,
    Gerardo

  • GURUS reg.error NO MATERIALS COMPONENT WAS DETERMINED

    .I am having an issue of how to create a super BOM and super routing for a configurable materials when all the options I have are non-stokable. So i went ahead and created the component in BOM with class item category and gave the class name.
    Routing I did the usual way and SO was created,MRP run is done and now when I see the components tab in the planned order,I get this error    "NO MATERIALS COMPONENT WAS DETERMINED" looks like the BOM did not explode...please let me know how to fix this?
    Thanks in advance

    Hello
    Could you please check the OSS note "SAP Note 1872228 - No Cost Component Split in Plan Price Calculation". I have also faced the same issues and it get solved by implementing this oss note.
    Before implementing this oss note, check whether KP26, KP06, Cost component structure are OK. Then execute the process KSS4 for Plan cost split and then KSPI.
    Then check the report S_ALR_87013644, whether the cost component split is working or not. If not then implement the oss note 1872228.
    Thanks
    Manish

  • Content generation error. [Error: invalid asset]

    I'm am trying to add an article to a Folio and am getting "Content generation error. [Error: invalid asset]. I have re-imported all of the files in the article. I'm stumped. Anyone have any ideas?

    Hm. Might be that the two errors are of a different kind:
    [Error: Invalid asset] vs. [Error: Invalid asset location].
    I have an error with a simple image I want to use with "Pan and Zoom" ("Schwenken und Zoomen" in my German InDesign CS5.5 v7.5.2 on OSX 10.6.8).
    The error message translates to "[Error: Invalid asset]":
    After a bit of experimenting I think I know why there was an error.
    My first attempt was on an TIFF image (=> ERROR), then I tried with a JPEG version (NO error).
    Too bad Overlay Creator cannot detect wrong file formats for the given task.
    Uwe

  • Error ERR-7620 Could not determine workspace for application ().

    Hi,
    I am getting this message on oracle application express 4.0.2.
    [Expecting p_company or wwv_flow_company cookie to contain security group id of application owner.
    Error ERR-7620 Could not determine workspace for application (). 
    OK 
    Can anyone please tell me how to solve this error.
    Hoping a positive response.
    Ranjeet.

    Getting this message while doing what?
    Denes Kubicek
    http://deneskubicek.blogspot.com/
    http://www.apress.com/9781430235125
    http://apex.oracle.com/pls/apex/f?p=31517:1
    http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
    -------------------------------------------------------------------

  • Error ERR-7620 Could not determine workspace for application (1).

    I am getting the following error message when using javascript with popup:
    Expecting p_company or wwv_flow_company cookie to contain security group id of application owner.
    Error ERR-7620 Could not determine workspace for application (1).
    OK
    Code : URL : javascript:popUp2('f?p=&APP_ID.:16:&SESSION.:::16:P16_DBI_TYPE,P16_STATUS,P16_DBI_MANDATOR:SYBASE,NotScheduled,#LABEL#')

    Hello,
    You should upgrade all the way up to 2.0
    Carl

Maybe you are looking for

  • Data Mining overflow error while loading the mining viewer

    I developed a time series model that processes succesfully. The problem I have is that when I try to view the mining model viewer that displays the times series on a chart, I get the error below: An error occurred while a prediction query was being e

  • Windows Explorer folder context menu crash

    Hello, On a PC running Windows 7x64 Ultimate,  Windows Explorer closes with a "Windows Explorer has stopped working" message, and needs to be restarted. It quits when I right click on a folder, while right clicking on a file doesn't cause it to quit.

  • What do I do now that I have down loaded LR 4 only to find out that it's not compatable with win. XP

    What do I do now that I have down loaded LR4 only to find out that it's not compatable with windows XP?

  • Help with App Crashing

    I am having trouble opening my app on the simulator. I clicked build and run on xcode and there were no problems with the build and it said that the build was successful. When it goes to run the app in the simulator the app in opens then closes it. W

  • GR55 Report

    Hi Sap Experts, In the Initial stage Profit center document were not generated for 3 material documents, Due to that the value was not updated in GR55 Report (Report Painter). Need to be updated the value in the GR55 Report. What steps need to be don