Error in Asset Accounting Specify Intervals and Postings Rules

Hi,
I am configuring for Asset Accounting and when I go to this part:
Asset Accounting > Integration with the General Ledger > Post Depreciation to the General Ledger > Specify Intervals and Postings Rules
I get the error "Company code XXXX is not defined" (message no. AC519).
The company code specified in the error was deleted in the system before. I am thinking that there is a table where this company code is not yet deleted. How can I solve this? Thanks a lot.

Create the company again, make your changes and delete the company again

Similar Messages

  • What is the process for MM and asset account a/c and FI

    what is the process for MM and asset account a/c and FI
    Regard's
    VYadav

    Dear,
    There are below steps involved...
    1. Create purchase requisition..
    2. Create purchase order from above or you can directly creating it. Make sure you are entering A in account assignment category..
    3. Do the GR of asset based on PO created in step 2 in transction MIGO..
    4. Pass the invoice in MIRO.
    5. Make payment.
    6. Clear the vendor account...
    Result is Asset is aquired......
    Regards,
    Chintan Joshi

  • Error 'Enter GL Account' while posting and invoice line item in MIRO

    Hello Gurus,
    I am facing a rather wierd issue.
    While posting a PO invoice in Tcode MIRO, its asking to enter the GL account in line items. Everytime I am entering the GL account and pressing the enter key, it wipes off the GL account clean and gives the same error 'Enter GL account'.
    It seems like this error is happening at the very first line item of the invoice. System is able to accept the GL account in 2,3,4th lines. If I delete the first line item, whatever is the first line item in that screen adapts the issue.
    Any help would be great as I have no clue what to do.
    Thanks

    Hello Priyadarshini,
    could you inform the error message number and it complete long text?
    Regards,
    Mateus Grings

  • Error in Asset Accounting Message no. GLT2201

    Hi SAP Gurus,
    We have activated document splitting. WHile posting document in asset accounting through F-90
    system showing error "The field Profit Center marked as balancing is not filled with any value in line item 001, even after document splitting".
    But I think in asset accounting profit center will be picked from asset master data(Cost Center).
    Can any body plz help me out regarding the above issue.
    Reply will appreciated with points
    Regards
    Amar

    Dear Amar,
    I have also Same problem, can u suggest how you sloved the same
    Thanks
    Vijay

  • Error in Asset accounting

    Hi,
    ALL,
    For asset fiscal year close i run the t.code AJRW to close the asset fiscal year system is saying it is a background processing when i enter system gone to background processing,  here my question is how to identifiy in background process i checked in SM37 i am not able to what to do in SM37, Can any one explain me how to do this and how to check.
    Thanks
    Gopi

    Hi,
    Once the You excute the transaction, you get the program(RAJAWE00)
    name, if you go the SM37, you get the Program pertaining to your ID.
    Job Name: RAJAWE00     Job Created by xxxxxxx and status
    Kindly check and revert back.
    Thanks and regards.
    Sivakumar.Subbiah

  • Error AC519 while Specifing Intervals and Posting Rules for Depreciation.

    hi,
    i deleted one company code from system and now tring to execute t-code OAYR. i checked there is no assignment of company code with chart of depriciation.
    error is like
    Company code XXXX is not defined
    Message no. AC519
    Here XXXX is deleted company code code.
    how to resolve this now?
    thanks in advance.

    Hi,
    AC519 rises always due to inconsistent customizing. Therefore, this issue is out of the scope of support.                                                                               
    You have to check the content of tables T093C, T093U, T093B, T093D. 
    There might be entries with value '    ' (initial).                                                                               
    You can delete those entries via debugging or with a self-created   z* program for that scope.  
    regards Bernhard

  • How to specify  inclusion and exclusion rules for File data sources

    This is the seed URL for a file data source: file://localhost/c:/myDir/
    I want to exclude indexing and searching of files under: file://localhost/c:/myDir/obsolete/
    What is the exact format for the exclusion URL?
    I have tried both file://localhost/c:/myDir/obsolete/ and /myDir/obsolete/
    but neither of it seems to work; it still indexes everything under /myDir/
    Should I just put: /obsolete/ as the exclusion URL?
    Also after initial crawling, if I change the inclusion and or exclusion rules and then run the crawler again, it should update the indexes accordingly. Is that right?
    The version of UltraSearch I am using is 1.0.3.
    Thanks for any help on this.

    Try "/c:/myDir/obsolete/"
    Changing inclusion/exclusion rule does not affect files already crawled. It onyl
    affects next crawling behavior.
    To do any DML to existing data set, use SQL directly on wk$url table under the instance owner.

  • Physical year reopen asset accounting

    Hi freinds
    physcial year closed on 31/03/2008, now  client  found errors in assets accounting, client wants to reopen the physical year. 2oo8 is it possible? if reopen the physical year what are consequnce can happen? they want to reverse entry t-code FBRS and FB08. what is transcation code reopen closed physical year reopen. .
    kindly explain to me processing and steps
    regards

    hi Eli
    please give me detail steps what i suppose to be do first, dont feel bad about my request. client going now crazy
    As per your email please let me know what is the purpose of  t-code ABAC its not valid one
    what exactly function do t-code OAAQ
    what exactly function do t-code OAAR
    kindly explain to me and the steps also.
    Thanking you
    Bobby

  • Creating user accounts with OIDDAS and use them from the OS

    Hi,
    I have a customer that is experiencing an error creating user accounts from OIDDAS, and use that user accounts from the operating system.
    My customer is using OID/OAS4OS 10.1.4.2.0, and that version is not longer available to download, then, I will try in my own environment
    with OID/OAS4OS 10.1.4.3.0.
    And the question is the following: is supported to create user accounts with OIDDAS and expect that users can work with OAS4OS and be
    able to authenticate in the operating system?
    For the reference, SR# 7222351.993:
    Thanks,
    Luis Vivero.
    Edited by: LV in ORCL on Dec 11, 2008 6:47 AM

    Hi Jacco,
    I didn't see your post before.
    Nop, unfortulately I don't have a document with that. I just received that answer
    from development (related to the plugin for AD that is not certified, and DAS is
    not intended to work with OAS4OS).
    Anyway, about the plugin to work with AD, this is working for me; at least I tested
    it by configuring the plugin, I configured synchronization, the mapping file, I did
    the bootstrap, and the accounts that were bootstraped now shows the OS attributes
    on DAS.
    Regards,
    Luis Vivero.

  • Firefox has repeatedly gone into "Not responding", needing me to force close it (or it will bomb out eventually) - always with Hotmail, possibly related to "Error! Filename not specified." being added to some e-mails when using FF .... any ideas?

    Not much more to add, other than this current and very interesting thread elsewhere:
    http://www.google.co.uk/support/forum/p/gmail/thread?tid=3ed94668bd00125f&hl=en
    I first picked out Firefox as being a common feature to the words "Error! Filename not specified." being added to e-mails (the thread talks about gmail, but I am finding it with Hotmail too) and other contributors note FF has suddenly started locking up unusually frequently. FF has always been stable for me with Hotmail until now - other (non-email) web sites are okay. I have McAfee Internet Security and Ad-Aware installed, both up-to-date and both show the PC to be clean. I've also updated all plugins etc - again, the problem persists.

    Okay, it's McAfee Site Advisor clashing with Firefox (I'm running FF v3.6.13). Disable McAfee Site Advisor by:
    Firefox > Tools > Add-ons > Extensions > McAfee Site Advisor > Disable and re-start Firefox.
    Stability returns to Firefox, Hotmail no longer locks up and no longer adds "Error! Filename not specified." and a bunch of grey squares to the end of sent e-mails.
    Thanks to those at:
    http://www.google.com/support/forum/p/gmail/thread?tid=7c144d837db89ac6

  • Book on Asset Accounting

    Kindly tell me if there is any comprehensive book on Asset accounting like Hurst and  Novak for others.I am a biginner at FI- AA.
    thanks
    Anuradha Ambekar

    Hi Anuradha,
    Good morning and greetings,
    Please buy the following book and it is excellent.
    http://www.amazon.co.uk/FICO-Interview-Questions-Answers-Explanations/dp/1933804106/ref=sr_11_1/026-0971671-0222839
    You can order through internet or directly from the shop.
    Take care
    Thanking you
    With kindest regards
    Ramesh Padmanabhan

  • Asset Accounting-Equipment

    Dear All,
    How can we Track assets in PM and how asset account will work and how i configured.
    Please suggest.
    Thanks
    Sushant

    It will be appropriate to refer a technical object as an Asset, when Asset Synchronization is done, which is an integration feature with SAP ERP Financials  - Asset Accounting.
    As far as Tracking of an asset (Equipment) is concerned, this can be done through Equipment Usgae Period. IE02 --> Extras --> Usage list gives you total movement report of that particular Equipment. The rest of you queries the above referred space, might be able to answer indetail.
    KJogeswaraRao

  • I have photoshop elements 13 and want to remove photoshop elements 10 first.  When I try to remove 10 I get error 1316 , specified account already exests and will not remove. I have windows 7

    I have photoshop elements 13 and want to remove photoshop elements 10 first.  When I try to remove 10 I get error 1316 , specified account already exests and will not remove. I have windows 7

    Exit Code: 6, Exit Code: 7 Installation Errors - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
    Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review your installation logs

  • How do I Uninstall Adobe PSE9?  All I get is an error message, "Error 1316.  The specified account already exists".  Then the Unistaller rolls back and the program just sits there, partially uninstalled and unusable.

    I have upgraded to PSE13 and want to unistall PSE9.  When I try to do this all I get is an error message, "Error 1316.  The specified account already exists".  Then the uninstaller rolls back and I am left with a partially uninstalled version that is unusable.  I tried to reinstall the software from the original PSE9 disk but all it tries to do is uninstall the version already on my computer, and this then does the same thing as noted above. How do I completely uninstall PSE9?

    See here:
    How do I remove older versions of Photoshop?

  • Error - Asset Accounting

    Hi All,
    I have an Issue in Asset Accounting.Details are mentioned bellow. Pls help me with your advices to resolve this.
    Fiscal year assigned for our Company Code is Z1 and it starts from April 2007 till March 2008. We have run the depreciation for 8 periods (i.e., from April 2007 to Dec 2007). After posting the depreciation for December 2008, Management has decided to change the fiscal year to April 2007 to Dec 2007. So that we will have the Calendar year as the Fiscal year from 2008 (jan 2008 to Dec 2008). So that i have change the posting periods by shortened the fiscal year.
    As System calculates the depreciation for 12 months and it distributes into 12 periods in that year, postings are done for the first 9 months (Apr 2007 to Dec 2007). And there is balance of 3 months depreciation not posted in the system according to the system initial calculation. So while running the depreciation for 1st Posting Period of 2008 (jan 2008) system has shown error. And so that i have test run the depreciation (AFAB) for the December 2007 with selection of Repeat Run. Results of the test run shows as Amount Posted in Dec 2003 is with correct figures and amount to be posted is with the amount of the 3 months depreciation. So system is expected to post the 3 months Depreciation. Only then we could able to run the depreciation for January 2008.
    But we are not required to post those 3 months depreciation in Dec 2007 as that is the last posting period in 2007 and we have already posted the depreciation for this month.
    Pls help me to provide the solution to change the amounts which are shown in Amount to be posted column if i repeat run for Dec 2007.
    Thanks in advance
    Regards
    Rao

    Check whether you haev made the settings in the following path.
    SPRO-Asset Accounting-Integration with the General Ledger-Valuation-Fiscal Year-Fiscal Year Variants-Specify Other Versions on Company Code Level
    and
    SPRO-Asset Accounting-Integration with the General Ledger-Valuation-Fiscal Year-Fiscal Year Variants-Shortened Fiscal Years-Define Reduction Rules for Shortened Fiscal Years

Maybe you are looking for

  • Moving of flat file from the application server after upload.

    Hi All, I am uploading data from a flat file placed on the application server by a BDC program. After the BDC has created the session i want to transfer the flat file from that folder to another folder on the application server by changing the name o

  • How can I install pc games on a mac

    I want to play Counter strike, gunbound, age of empires or battlefield 3, How can I play those games?

  • How can i remove a blank Plug-in?

    I cant get to my EQ easily with this.  it happens every now and then. sometimes I will have only three plug-in slots then sometimes I have to many like this.  i click on no plug-in but it still leaves a blank spot like this.  How do I remove a blank

  • Sharing reports across different OBIEE installations

    Hello, Is there a way to import/export reports from/to different OBIEE environments? We developed a number of Answers reports, and would love to share them with our counterparts who have their own OBIEE installations. The problem is that our environm

  • How to get result query to print PDF pages, e.g.invoices?

    Greetings I have set up the query results to fill an html page with data which is an invoice to be sent out to lesees. Using the cfdocument tag, I can get a printable PDF version with the mailing address positioned to show in a window envelope, etc.,