Error in Asset Value carry forward to next year

As a regular periodic process of Month/Year closing activities in SAP, Asset Year 2015 was opened and then closes the year 2014 and carried forward the Asset values to the year 2015. But unfortunately some of the Asset value had not been transferred to the year 2015. As a result, Depreciation had not been charged for those Asset for the year 2015. Need to transfer the Asset value to the current year immediately. Can any one help me regarding the problem ? The APC Start value is showing in the year 2014 but its not showing in 2015.
The Closing value of Current APC of year 2014 does not match with the Opening value of the APC Start, so what should be the possible reasons for that ?

Hi Erika,
I did that on last January 2015. First i use the T-code: AJRW for the Fiscal Year Change and then T-code: AJAB - for Year end-closing Asset Accounting as i did that for last 4 years. Though there was as error message indicating error in depreciation calculation, our consultant assured me that that will not create any problem. The Error was like below:
600981       0    Secretariat Table                              2014 Error in dep. calculation

Similar Messages

  • How to carry forward budget next year for single wbs element

    Hi,
    i want to carry forward budget next year for single wbs element.
    pl suggest me.
    Thanks & Regards
    Purna.M

    Hi,
    Go to CJCO click on Dynamic Selection and in master data of WBS element select No of person responsible and give the person responsible and execute.before that maintain no of person responsible in that specific WBS element.
    hope it will solve ur problem.
    Regards
    Avinash

  • Absence Quota Carried Forward to Next Year

    Hi All
    hope you are doing well. I was looping around for carry forward remaining absence quota from one year to next year
    Requirement:
    Absence Quota  for 20 days generated from 01.01.2012 to 31,12.2012, deducted 4 days on december 2012
    but absence quota to next year i.e from 01.01.2013 to 31.12.2013 is showing as 20 wherein actual should be 16
    Followed Woods documents at Carry Forward Absence Quota but failed
    Configuration of Time Types, PCR and Schemas as folows, request your kind attention at earliest as its business critical
    Configured a constant at T511k
    Created two time types
    For Quota
    For carry forward
    PCR as follows
    Schema
    Request your kind attention on the same, helpful/ right answers will be rewarded with points
    BR
    Anil
    Message was edited by: Sikindar A

    Hi Anil,
    I just had a quick look at the PCRs and I think some things are wrong.
    First of all ZCMO controls if it's the last day of last month or not. If it is the schema will go through ZCFL.
    ZCFL reads the remain part of quota type 20. Please make sure you quota type is correct. I mean it's 20. I assume quota type is correct. PCR checks if remain of quota is equal or great than 20 then it put 20 into time type 0904.
    Until here you will have remain part of quota at last day of last month in time type 0904.
    Now you need a PCR to control if the date is first day of first month (01.01) reads value of 0904 and through a quota generation rule of V_T559L generate quota.
    I don't understand what ZCFT is for!
    Regards,
    Omid

  • Balance Leaves to be carried forward to next year

    HI Experts,
    I am using Time evualation with -ve time , i want to carry fwd all the balance leaves left for the year to the next year.
    I have set the "Permit Quota Generation in Time Evaluation" node to "Increase". However i am not able to meet the requirement. Please let me know if i have to maintain any other table or should i have to write PCR for this
    Regards
    Kanna

    You have to write Pcr's for reading the balances and to carry forward the Leaves to quotas.
    PCR for Reading Balances.
    hrs= Bcurmo
        hrs?(specify the month on which it has to read the balance)
        =
           hrs=Bcurdy
           hrs?(Last day on/after which it has to read the balance)
           =
           OUTAQTYP
            XX (XX:Mention Absence Type)
            hrs=FR C
            addMBXXXX(Time type 4-digit)z
    _PCR for Carry forwarding the Leaves.
    hrs= Bcurmo
        hrs?(specify the month on which it has to get the balance)
        =
           hrs=Bcurdy
           hrs?(Starting day to get the balance)
           =
           hrs=Mxxxx(Time type which we maintained in above PCR
           updtqAxx(Absence which it has to carry forward)
    Where
    A-Syntax
    B-Syntax
    curmo-Current Month
    curdy-Current Day
    F-Syntax
    R-Remaining
    C -Syntax
    MB-Monthly Balance
    z-Replacing Value.
    Check and revert with your Comments
    Experts:Correct me if am wrong.
    Regadrs,
    Rao

  • Retained Earnings Account balance not carry forwarded to next year

    Hi,
    We have problem in Retained Earnings Account Balance C/F to next year
    example:
    G/L Account closing balance in 2008 - 1000.00 (as per FS10N) after c/f balances to 2009
    G/L Account Opening balance in 2009 - 850 (as per FS10N) (there is a difference 150.00)
    If we double click on Cumulative balace of 850 it will give us - 1000.00 and if we see in report : FBL3N it will show correct balance. Only FS10N is not showing correct balance.
    Can you please let us know what will be the reason ?
    Thanks
    Ravi

    Hi Ravi,
    We are using 4.6C version and last few years there was no problem and we have other company codes which are showing correct balance. But only one company code this difference is coming.
    If we double click the FS10N report opening balace it will give us the correct balance. But in display there is showing less amount.
    Thanks

  • Sales and purchase journal - balance carry forward to next page

    Hi all,
    When we run sales and purchase journals in transaction S_ALR_87012357 (Belgium) and print it we want a summary per page and balance carry forward to next page.
    The paging is correct by selecting "statistical info not printed" in output control but we don´t want only summary on last page, instead on every page and a total summary on last page.
    Does anyone knows how to mangage this?
    Best regards Lisa

    With a developer implement a the BADI  FI_TAX_BADI_010

  • Budget balance carry forward to new year fiscal year

    Hi,
    Currently, our setting for Funds Management Master
    Data is year-dependant. Now, our user request for a budget carry
    forward from one year to another year. So, we are trying to the fix the
    configuration.
    My question is, can we do the budget balance carry forward if the master data is year-dependant. If can, how to do that?
    For your information, our system is SAP R3 version 4.7C and using the BCS.
    Appreciate your advise on this matter.
    Thanks and regards

    Hi,
    copy cost center planning:
    kp97  - copy plan to plan
    kp98  - copy  actual to plan
    Internal order copying
    ko14 - copy plan to plan
    ko15- copy actual to plan
    all the best
    prasad

  • If I enter birthdays into my diary will they automatically be carried over to next year

    If I enter birthdays into my diary will they automatically be carried over to next year or will I have to enter them all again.

    Hmm.... When in year view, the birthdays only show up through 2014 like I said. But if I go into any other view, they do show up as expected. So much for year at glance help.
    Maybe my calendar knows that at my age I'm not likely to be celebrating anybody's birthday beyond 2014! Yikes! Sure hope that's not the case.

  • BPC10NW: Error while running Balance Carry Forward

    Hi,
    I am trying to run 'Balance Carry Forward' (COPYOPENING) to copy opening balances from 2010.DEC to 2011.JAN.
    The 'Opening Balances' package fails with "RUN_LOGIC:Cannot find document/directory" error.
    The Copyopening.lgf is available and is been validated successfully.
    We have refered to the below link but still the opening balances is failing with the same error.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70657540-106d-2e10-8393-d702056767a4?QuickLink=index&overridelayout=true
    Any suggestions?
    thanks in advance,
    M.S

    Hi,
    I have found similar issues with business rules in v10.
    Can you just try to include this in Default logic and see if you can get it to run from a sent record. I know that this is not necessarily the nicest approach as you would normally like to run the package from DM, but I could not get certain things to run from DM.
    If (like me) you can get it to run via Default, you could then trigger this by sending a dummy record to a dummy account.
    I know it's not ideal but until this is fixed (I think it may be a bug) then this could be a solution.
    Let me know if this helps at all.
    Tom.

  • Carry forward to next fiscal year G/L balances shopwing Difference

    Dear Sapgurus,
    I am trying to carry forward the gl balances for 2009 to 2010 in the tcode f.16 i got differences and then i used the tcode faglgvtr for ECC. 6.0. Still i am getting balance differences in the fiscal year 2010.
    Please anyone Provide me how can i clear/correct the gl balances.
    regards,
    Tirupati

    Dear Ravi,
    Thanks for your replay.
    Actually now we are in 2012 fiscal year. the documents are posted in 2010 fiscal year 13th period. It is not suggestible to do carry farrowed from 2010 to 2011 fiscal year because of the reports were already submitted.
    We have done testing in quality system that reversed the posted documents by giving the same dates and later we did the f.16 to carry farrowed from 2010 to 2011. Then the balance was became "0" at 2011 fiscal year beginning. But it is not suggestible in production.
    Could you please suggest any alternative solution or any correction program.
    Regards,
    Mr. Rao

  • Time Base / Carry Forward / Copy Last years balances

    Hi Experts,
    Can anyone throw light on how would the TIME=BASE function as used in the script below help in carry forward ?
    Is the below syntax correct ?
    *XDIM_MEMBERSET DATASRC=%MyDataSrc%
    *XDIM_MEMBERSET TIME=BASE,%TIME_SET%
    *XDIM_MEMBER ACCTDETAIL=%TFCLO% TO %TFBEG%
       *WHEN TIME
       *IS BASE
          *WHEN ACCOUNT.ACCTYPE
          *IS "AST","LEQ"
             *REC(TIME="%TIME_SET%")
          *ENDWHEN
       *ENDWHEN
    *COMMIT
    Regards,
    Pankti Shroff

    Hi
    I am also facing an issue with this script in 7.0 version.
    I am trying to arrive at the difference if 2 dparent account (Current accounts ) for Cash flow analysis by using the below script
    *XDIM_MEMBERSET measures = YTD
    *XDIM_MEMBERSET CATEGORY = ACTUAL
    *XDIM_MEMBERSET ACCOUNTL =<ALL>
    *CALC_DUMMY_ORG ACCOUNTL=PARENTH1
    *WHEN ACCOUNTL
    *IS #211
    *REC(EXPRESSION=-GET(ACCOUNTL="#211",TIME=BASE)+%VALUE%,ACCOUNTL="CF_0015",ACCTDETAIL="F_NONE",DATASRC="INPUT")
    *ENDWHEN
    *COMMIT
    This does not pick up any value as available in Mar'08 (prev year -- i have Apr to Mar as the accounting year)
    Pl let me know if there is some error on this script logics and how can i best work it out
    Regards
    Manoj

  • No asset values shown for new fiscal year

    We have a problem with an Asset in our FA module. The Asset was created in May 08 and had costs posted to it within the same month. Depreciation was run for May & Jun 08 with no problems. Year end was Jun 08 and the asset was included in both the Asset Balances report and the Asset History Sheet.
    However, the asset does not appear in either of the above reports for Period 1 of the new year. It can still be viewed in Asset Explorer (AW01N), but the cost does not appear to have been carried forward to the new financial year. There is no data in the u2018acquisition valueu2019 field for 2009 and no planned depreciation information.
    We have checked the master data record and although the acquisition posting date was 24.05.2008, this date does not appear in the u2018First acquisition onu2019 field, so not sure if this is the issue?
    Any ideas anyone?

    Hello..
    You first have to change the fiscal year of the asset to next year through T Code AJRW & than only u can see the balance in the next year.otherwise i dont think there is any problem.
    Regards,
    Aakash

  • Commitment Carry Forward in the year end closing!

    Hi All,
    We have a lot of open PRs and POs against Internal orders and WBS at the year end and we also have the budget control activated. Now we are going to do the year end closing. My question is:
    1. Who should do the commitment carry forward, supply chain or FI team?
    2. If supply chain will do the PR or PO carry forward, will FI team also need to run the commitment carry forward (KOCF or CJCF) from FI side at the same time or not necessary?
    Thanks,
    Ting

    Hi Abhinay,
    Thanks for the answer.
    When you say they have to perform year end activities like checking PO and PR, what actually they are doing? Do they just need to check whether those PO or PR are required (if not, close them) or they need to do something more? . As far as I know, no steps like checking PO and PR are required here. So I am wondering whether we have missed anything or not. Can you give me some details about that step?
    Also, if we are using only Total value for the budget, not annual value, I don't need to do the budget carry forward closing step. In this case, do I need to do the commitment carryforward step?
    Thanks,
    Ting

  • Balance Carried Forward for a Year

    Hi,
    Can anyone tell me if there is any table where the carry forward balance for a particular year is stored?
    I checked LFC1 table but it is not storing data consistently for all vendors.
    For some vendors the balance is correct, while for others it is not.
    Thanks in Advance,
    Shivali

    Hi Shivali,
    Have you looked table <b>BSIS</b> for open items?
    Please check also this link perhaps it may help.
    http://www.sapgenie.com/abap/tables_fi.htm
    Regards,
    Ferrty Lianto
    Please reward points if helpful.

  • How to carry forward  RE prior year for each period?

    Hi,
    I have a Retained Earning (RE) prior year. How do i carry forward the opening balance for each period?
    I have tried to use the copy method (using the same version but copy from period 1 to 2) however encountered message stating that " Posting in identical currencies: Amount disagree".
    Please advise.
    Regards, Renee

    Renee,
    What has remained unclear
    how SEM BCS handled balance carried forward?
    Re: BCS Calculation for retained earnings

Maybe you are looking for

  • When opening a second window, homepage doesn't open and can't access any other site, stays a blank white screen.

    After updating to Firefox 6, every time I open a second window, all I get is a blank, white page. My homepage doesn't open, either, even when I hit the home button. I have to manually type in my homepage address, and then, it's the only address that

  • Trigger follow up action in Auto UD

    Hello Gurus, we have defined follow up action after making UD of inspection lot. the logic is to move the stock from one Sloc to other after UD is made. This follow up action works well when we make UD in QA11 (foreground). however, we observed that.

  • Restrictions of movement types in MIGO

    Hello, When I select goods receipt in MIGO, I would like the system to avoid using 201 movement type. I mean, if I select goods receipt, it should only work for goods receipt Is there a way that I can block other movement types like this? I tried to

  • Oracle 9i Release 2 (9.2.0.1.0)

    Hi I am installing Oracle 9i on SuSe 9...my challenge is when I run Oracle Universal Installer the welcome screen hangs...when I click next nothing seem to happen.....what might be the problem.......

  • MaxDB: .M760309 service fails to start

    Dear Friends, The MaxDB: .M760309 service is not starting when the system starts. We are working on Netweaver 7.0. Currently the MaxDB (quick) is set to start automatically. It returns an error message : "Error2; The system could not find the file sp