Error in Assets creation in AS01

HI Expert,
I'm facing error while trying to create Assets account under AS01 - strange part is i have created building account in same heading but while trying for mahinery and furniture getting 2 differene errors
1)Number range 1 is not in the number allocation range? where as ihave already created 01 number range in FBN1
2)while trying to created the machinery a problem of screen layout for asset master data in this tab error is appering when i tried to give the option like madary optional and suprressed in screen layout for asset master getting error as maintenance level not assinged and here i'm not able to make any changes in those field and now all fields are coming as a mandtory- fields like business area ect
Appreciated to all those who will reply ASAP
Thanks & Regards
Jain Varghese

Hi Paul,
Thanks for your reply,
1) I have created the number range for the same, because of that only i was able to created assets under that column for building but when trying to create for Furniture and Fixture i'm getting error as Number range 1 is not in the number allocation range?
Please note: i have created the number range already but then also getting the error.
2) for the 2nd question but not able to make any changes in field status group for the asset machinery its giving error as maintenance level not assinged and while doing same all the option became as a mandatory where as i'm not able make them as optional again?
Please have a highlight on this again and help me out.....
Appreciated your help
Regards
Jain

Similar Messages

Runtime Error during Asset Creation (AS01)

Hello Everyone !
I have been trying to CREATE ASSET for a long time but unfortunatly land up on ..... RUNTIME ERROR. I used all the possible ways to get it solved but i am stuck. Error analysis says The ASSERT Condition was violated.
Hope you guys would help me out and push my knowledge further. Answers would be highly appreciated.
Srinivas

Hi Srinivas
Please go through T-cd:ST22 and check the dump content first, especially, u2018Error analysisu2019, u2018How to correct the erroru2019 of the runtime error long text may give you some hints to solve the problem.
Regards
George

User Exit/BADI for AS01 ( Asset Creation )

Hi Xperts,
My requirement is during asset creation in AS01, after asset generated i want to send asset no, subno, asset creation date, int. order no to ztable.
Can anyone suggest user exit/BADI which suit this requirement.
I have gone through forum search, but not found suitable object.
Ram.

Hi Ram,
Check out below Badi and Enhancement
BADI
IHSA_LIST_EDITING
ENHANCEMRNT
EXIT_SAPLAAPM_002
EXIT_SAPLAIST_001
EXIT_SAPLAIST_002
EXIT_SAPLAIST_003
THANKS & REGARDS
G.Vendhan
Edited by: vendhan g on Jul 24, 2009 12:33 PM

Asset Creation Event Error

Hi All
I have a requirement to start a workflow when an asset is created. I am using BUS1022. I have created and activated the linkage.
The entry in SWED exists for change doc: ANLA and the table ANLA
I have created a similar entry in SWEC for the event CREATED.
When i create an asset, the event does get triggered but there is an error., In SWEL it shows up as
Check FM with exception.
Receiver type :TS00001003
Message: Element FLAG_ANLAGE_BEARB is not available in the container
Check FM: AWFC_CHECK_ASSET_INCOMPLETE
Now I Have created the above mentioned element in my workflow and passed it the values in binding.
Where do i have to define this parameter? It is required in the parameters of the event---.
Thank you

Hi,
I am using other workflows like PR, PO, SO and too many WF templates, for those workflows also the event trace is not getting. But the workflows are getting triggered with out any problem.
Steps for event trace is SWELS for switch on the event trace and then executing the transaction (AS01) then after I am checking the event trace by using SWEL.
Can you pls advise the proper way for getting event trace, if I am not using the proper way.
Can any body explain the process for Asset creation.
Is there any equipment needs to be created before of after of Asset creation. I thougt, depends on this the CREATED event get triggers.
Thanks in adv.
Krish.

Error While Creating Asset Master in AS01

Hi,
While creating Asset Master in AS01,I am getting the below error.
E003 SYST: Period 000 is not valid in financial year variant
I am using the standard Fiscal year variant V3
Kindly help me to fix this issue
Thanks
Kishore

Hi
GO to the transaction code OBY6 , double clcik on company code and see have you asigned the fiscal year variant to company code
Kindly revert in case of any query
regards
roobal

User Exit / Badi / BTE for Asset creation A ?

Hi Experts,
I need User Exit / BADI / BTE for asset Creation.
After saving newly created Asset from As01 we need to send a mail to the person for whom the Asset is assigned.
i have tried all this.But no one is triggering after saving the As01 transaction.
Exit Name           Description
AAPM0001            Integration of asset accounting and plant maintenance
AFAR0003            External changeover method
AFAR0004            Determination of proportional values for retirement
AINT0004            Change amount posted for certain areas
AINT0005            Dummy for extended syntax check. Do not use.
AISA0001            Assign Inventory Number
AIST0001            Exchange number range in master data maintenance
AIST0002            Customer fields in asset master
AMSP0002            Determine relationship type for two company codes
TRAN0001            User exit for asset transfer
Please suggest if anybody worked on this.
regards,
Imran

Hi,
Check out the following posts pertaining to similar topic.
Change Asset Workflow
Asset Management WORKFLOW
Regards
Sreekanth

Plant & business area validation in asset creation

Dear All,
Am working in a plant & business area validation which will fire the error msg when wrong plant is assigned at time of asset creation. Issue is for a company we have 19 business area and each business area assigned to various plant. In order to avoid the individual step for each business area, have merged two or more business area in pre-requiste section and correspondingly plant had been validated in check section. But when am inserting two check conditions, its not even working as per the logic, For ex :
Pre-Requiste :
( ANLA-BUKRS = '1300' AND ANLZ-GSBER = '1101' ) AND (
ANLA-BUKRS = '1300' AND ANLZ-GSBER = '1102' )
Check :
( ANLZ-WERKS = '1307' OR ANLZ-WERKS = '1308' OR ANLZ-WERKS = '1309' OR ANLZ-WERKS = '1304' ) AND
( ANLZ-WERKS = '1305' OR ANLZ-WERKS = '1306' ANLZ-WERKS = '1344' )
For the above condition system not validating as per business area since if we entering business area 1101 and entering the plant which related to 1102 business area, system not throwing the error msg where as if we put a single condition in a step its working fine.
Kindly suggest me how to overcome this by avoiding individual step creation for each business area.
Regards,
Balaji.c

Hi,
I have chnaged my validation in the following way as follows,
Pre-requiste :
Co code=XXXX
Check:
Business area = XXXX AND Plant = XXXX.
This condition is working fne for one business area, where as if i include more than one business area in the check section system not validating the condition, in a step its validating only one condition. Since 21 business area available for a co code its not feasible to create individual step.
Kindly suggest me is there any other alternative way to overcome this.
Regards,
Balaji.c

Main asset creation

Hi Experts
I got problem,
In Asset creation AS01, At Depreciation areas Tab, There is no fields are appear i.e empty
Please solve it
Thanks
Vas143

HI,
Please check the screenlayouts for Asset classes and also the filed status for Dep areas tab for Asset master record. It should not in the suppressed status.
Thanks

RC-00118: Error occurred during creation of database

adcrdb.sh started at Mon Nov 14 16:16:13 EAT 2011
The environment settings are as follows ...
ORACLE_HOME : /u04/d01/tech_st/11.2.0
ORACLE_SID : JCLONE
TWO_TASK :
PATH : /usr/bin:/u04/d01/tech_st/11.2.0/bin:/usr/bin:/usr/sbin:/u0 4/d01/tech_st/11.2.0/jdk/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/u04/ d01/tech_st/11.2.0/appsutil/clone/bin/../jre/jre/bin:/usr/lib/qt-3.3/bin:/usr/ke rberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbi n:/usr/bin:/usr/X11R6/bin:/root/bin:.
LD_LIBRARY_PATH : /u04/d01/tech_st/11.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib :/u04/d01/tech_st/11.2.0/ctx/lib
Executable : /u04/d01/tech_st/11.2.0/bin/sqlplus
The log information will be written to
/u04/d01/tech_st/11.2.0/appsutil/log/JCLONE_oracle/adcrdb_JCLONE.txt
Creating the control file for JCLONE_oracle database ...
SQL*Plus: Release 11.2.0.2.0 Production on Mon Nov 14 16:16:13 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1071333376 bytes
Fixed Size 1348968 bytes
Variable Size 427821720 bytes
Database Buffers 629145600 bytes
Redo Buffers 13017088 bytes
CREATE CONTROLFILE REUSE SET DATABASE "JCLONE"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01159: file is not from same database as previous files - wrong database id
ORA-01110: data file 1: '/u04/d01/apps_st/data/system01.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP add tempfile '/u04/d01/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "JCLONE.jtl.co.ke"
ERROR at line 1:
ORA-01109: database not open
ORA-01507: database not mounted
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1071333376 bytes
Fixed Size 1348968 bytes
Variable Size 427821720 bytes
Database Buffers 629145600 bytes
Redo Buffers 13017088 bytes
Database mounted.
BEGIN dbms_backup_restore.zeroDbid(0); END;
ERROR at line 1:
ORA-01119: error in creating database file
'/u04/d01/tech_st/11.2.0/dbs/MISSING00015'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 4754
ORA-06512: at line 1
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1071333376 bytes
Fixed Size 1348968 bytes
Variable Size 427821720 bytes
Database Buffers 629145600 bytes
Redo Buffers 13017088 bytes
CREATE CONTROLFILE REUSE SET DATABASE "JCLONE"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01159: file is not from same database as previous files - wrong database id
ORA-01110: data file 1: '/u04/d01/apps_st/data/system01.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP add tempfile '/u04/d01/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "JCLONE.jtl.co.ke"
ERROR at line 1:
ORA-01109: database not open
Error Running create/replace library with adupdlib.sql
ORA-01109: database not open
PL/SQL procedure successfully completed.
File created.
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Pr oduction
With the Partitioning, OLAP, Data Mining and Real Application Testing options
exit_code=0
Checking for errors ...
The database has not been successfully created. Shutting down the instance ...
SQL*Plus: Release 11.2.0.2.0 Production on Mon Nov 14 16:16:32 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected.
ORACLE instance shut down.
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Pr oduction
With the Partitioning, OLAP, Data Mining and Real Application Testing options
.end std out.
.end err out.
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : oracle
sDbDomain : jtl.co.ke
sDbPort : 1524
sDbSid : JCLONE
sDbUser : apps
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@oracle.jtl.co.ke:1524:JCLONE
Exception occurred: java.sql.SQLException: IO Error: The Network Adapter cou ld not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle .jtl.co.ke)(PORT=1524))(CONNECT_DATA=(SERVICE_NAME=JCLONE)))
Exception occurred: java.sql.SQLException: IO Error: The Network Adapter cou ld not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle .jtl.co.ke)(PORT=1524))(CONNECT_DATA=(SERVICE_NAME=JCLONE.jtl.co.ke)))
Exception occurred: java.sql.SQLException: IO Error: The Network Adapter cou ld not establish the connection
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
StackTrace:
java.lang.Exception: Control file creation failed
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:661)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:328)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:304)
at oracle.apps.ad.clone.ApplyDBTier.<init>(ApplyDBTier.java:154)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstruct orAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingC onstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:501)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
at java.lang.Thread.run(Thread.java:595)
Current database Version is 11.2.0.2
Apps Version is 11.5.10.2
RUP version is 6
Forms Patchset version is 19
Please advise how to resolve this error ?
Regards
Mohammed.

Please refer to these docs/links.
Troubleshooting RapidClone issues with Oracle Applications 11i [ID 364565.1]
Adcfgclone.pl DBTier is failing with error for dbms_backup_restore.zeroDbid(0) [ID 361157.1]
https://forums.oracle.com/forums/search.jspa?threadID=&q=ORA-01503+AND+ORA-01159+AND+ORA-01110&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Error occured during creation of oracle snapshot

Dear All,
I am getting error messange in my SAP Inbox in t.code SBWP.
In SBWP, the nessage text is as follow.
=============================
Error occured during creation of oracle snapshot (Creation aborted)
(Log see also transaction SLG1, Object ORASNAP, Subobject ORASNAPCR)
Oracle snapshot creation program aborted
Error while copying from oracle view to SAP table
Oracle view SAP$KCBFWAIT
SAP table ORA_SAPKCBFWAIT
Return code (ORA-....) 942
You tried to work with the name of a table or view that does not exist in the database
The table does not exist on the database. A table name or view name was used that does not exist on the database.
===============================
I also check in T.Code SLG1, but i am not getting the reason for this error.
Regards,
Nisit

Hi,
Check each of the following :
the spelling of the table or view name.
that a view is not specified where a table is required.
that an existing table or view name exists.
Contact the database administrator if the table needs to be created or if user or application privileges are required to access the table.
Also, if attempting to access a table or view in another schema, make certain the correct schema is referenced and that access to the object is granted.
Regards
Krishna

Error during PO creation "Total BED % rate exceeds 100 % "

Hi.
Its concerned to Indian Excice.
Error during the creation of PO is " Total BED % rate exceeds 100 % " ,
( Message no. 8I453).
And you pls note in J1ID its 16% maintained for that perticular chapter id and its 100% for BED in tax code.
Can you pls tell me the reason for this error.
Regds

Hi Santosh,
362 is not maintained for BASB,but its maintained for condition type JMO1(IN:A/P BED Deductable) & JMO2(IN: A/P BED non deduct )in <b>AltCTy</b> field.
And For BASB 605 is maintained in the field AltCBV.
Can you Pls explain the significance of this alternative calculation type.
Regds

Error in Jcos creation

Hi all,
I am getting an error in Jcos creation.This is tyhe error I am facing.I checked evrything.Evrything seems ok.But i am getting the belwo error.
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM TYPE=B MSHOST=zimssap GROUP=PUBLIC R3NAME=PRD MSSERV=sapmsPRD PCS=1 ERROR timeout while pending for route completion TIME Tue Jan 06 20:21:50 2009 RELEASE 700 COMPONENT NI (network interface) VERSION 38 RC -12 DETAIL NiErrSet COUNTER 1
I configured sld so many times but never faced this issue.Some starnge error .Timeout oending for route completion.Please let me know what could be the problem?
Thanks and reagrds,
Rajesh

Hi
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION:
RFC_ERROR_COMMUNICATION | Unknown host
RFC_ERROR_COMMUNICATION - time out
Thanks,
Tulasi

RC-00118: Error occurred during creation of database Raised by oracle.apps.

Hi Experts,
Please note i am doing the clonning from production to test server.
Production Server -
1. Run the adpreclone.pl on the apps & db tier.
2. run the autoconfig on the apps and db tier.
3. shut down the production instance.
4. Moved the files and started the clonning process on the db tier i am getting the below issue.
My current E-Business Suit Version is R12.0.4 Database Version is 10.2.0.3. Operating system is SUN SPARC 64 BIT SUN SOLARIS 10.
Executing CreateDB...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : proddb
sDbDomain : clientdomain
sDbPort : 1530
sDbSid : TEST
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@proddb.clientdomain:1530:TEST
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST)))
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST.clientdomain)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST.clientdomain)))
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
adcrdb.sh started at Wed Mar 21 18:09:54 WAT 2012
The environment settings are as follows ...
ORACLE_HOME : /erptestdata2/u01/d01/tech_st/10.2.0
ORACLE_SID : TEST
TWO_TASK :
PATH : /erptestdata2/u01/d01/tech_st/10.2.0/perl/bin:/erptestdata2/u01/d01/tech_st/10.2.0/bin:/usr/ccs/bin:/usr/sbin:/erptestdata2/u01/d01/tech_st/10.2.0/appsutil/jre/bin:/erptestdata2/u01/d01/tech_st/10.2.0/appsutil/clone/bin/../jre/bin:/erptestdata2/u01/d01/tech_st/10.2.0/appsutil/clone/bin/../jre/bin:/usr/sbin:/usr/bin:/opt/EMCpower/bin:/etc/emc/bin:/etc:/usr/ccs/bin:/usr/openwin/bin:/usr/dt/bin:/usr/platform/SUNW,SPARC-Enterprise/sbin:/opt/sun/bin:/opt/SUNWexplo/bin:/opt/SUNWsneep/bin
LD_LIBRARY_PATH : /erptestdata2/u01/d01/tech_st/10.2.0/lib:/usr/dt/lib:/usr/openwin/lib:/erptestdata2/u01/d01/tech_st/10.2.0/ctx/lib:/erptestdata2/u01/d01/tech_st/10.2.0/lib32
Executable : /erptestdata2/u01/d01/tech_st/10.2.0/bin/sqlplus
The log information will be written to
     /erptestdata2/u01/d01/tech_st/10.2.0/appsutil/log/TEST_proddb/adcrdb_TEST.txt
Creating the control file for TEST_proddb database ...
SQL*Plus: Release 10.2.0.3.0 - Production on Wed Mar 21 18:09:54 2012
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1073741824 bytes
Fixed Size          2035496 bytes
Variable Size          432017624 bytes
Database Buffers     624951296 bytes
Redo Buffers          14737408 bytes
CREATE CONTROLFILE REUSE SET DATABASE "TEST"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01167: two files are the same file/group number or the same file
ORA-01110: data file 31: '/erptestdata2/u01/d01/apps_st/data/olap.dbf'
ORA-01110: data file 31: '/erptestdata2/u01/d01/apps_st/data/odm.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp02.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp03.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp04.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp10a5.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "TEST.clientdomain"
ERROR at line 1:
ORA-01109: database not open
ORA-01507: database not mounted
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1073741824 bytes
Fixed Size          2035496 bytes
Variable Size          432017624 bytes
Database Buffers     624951296 bytes
Redo Buffers          14737408 bytes
ORA-00205: error in identifying control file, check alert log for more info
BEGIN dbms_backup_restore.zeroDbid(0); END;
ERROR at line 1:
ORA-00210: cannot open the specified control file
ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 4168
ORA-06512: at line 1
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1073741824 bytes
Fixed Size          2035496 bytes
Variable Size          432017624 bytes
Database Buffers     624951296 bytes
Redo Buffers          14737408 bytes
CREATE CONTROLFILE REUSE SET DATABASE "TEST"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01167: two files are the same file/group number or the same file
ORA-01110: data file 31: '/erptestdata2/u01/d01/apps_st/data/olap.dbf'
ORA-01110: data file 31: '/erptestdata2/u01/d01/apps_st/data/odm.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp02.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp03.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp04.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp10a5.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "TEST.clientdomain"
ERROR at line 1:
ORA-01109: database not open
Error Running create/replace library with adupdlib.sql
ORA-01109: database not open
PL/SQL procedure successfully completed.
File created.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
exit_code=0
Checking for errors ...
The database has not been successfully created. Shutting down the instance ...
SQL*Plus: Release 10.2.0.3.0 - Production on Wed Mar 21 18:10:16 2012
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected.
ORACLE instance shut down.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
.end std out.
.end err out.
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : proddb
sDbDomain : clientdomain
sDbPort : 1530
sDbSid : TEST
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@proddb.clientdomain:1530:TEST
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST)))
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST.clientdomain)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST.clientdomain)))
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
Please advise ASAP.
Regards
Mohammed.

Nikki,
Check alert<SID>.log file for more details about the error.
It looks like that the source database was not cleanly shutdown before copying the files to the target node. Please do the following and check then:
SQL> connect / as sysdba
SQL> startup mount;
SQL> recover database using backup controlfile until cancel;
-- type CANCEL
SQL> alter database open resetlogs; If the above does not help, then shutdown the source database normally (make sure it is down), re-copy the files and start the cloning process again.

Oracle R12 Clone failing with RC-00118 Error occurred during creation of...

Im encountering the above error message i have seen the below thread which looks like the same issue, i was wondering if someone could confirm if the clone process requires an off-line backup on the source system for the clone process to work. Currently i'm using a tape backup which runs overnight, the system is up at the time of backup.
RC-00118: Error occurred during creation of database
Thanks

thanks for quick response, its a hot backup.
the steps ive followed are
1. adpreclone on source
2. apps,db,inst directories deleted on destination. (after services have of course been shutdown)
3. oracle variables removed from path
4. backup restored from tape
5. deleted program files/oracle/inventory directory
6. on cmd window run set PERL5LIB=
followed by perl adcfgclone.pl dbTier
is there anything ive missed?

RC-00118: Error occurred during creation of databas

On 11.5.9 with windows, while running the clone with the following command:
perl adcfgclone.pl dbTier
The following error occurs:
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 581506616 bytes
Fixed Size 452152 bytes
Variable Size 402653184 bytes
Database Buffers 167772160 bytes
Redo Buffers 10629120 bytes
Control file created.
alter database open resetlogs
ERROR at line 1:
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/u1/TEST/testora/testdata/system01.dbf'
alter tablespace TEMP add tempfile '/u1/TEST/testora/testdata/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP add tempfile '/u1/TEST/testora/testdata/temp02.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "TEST.zexsa.com"
ERROR at line 1:
ORA-01109: database not open
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
StackTrace:
java.lang.Exception: Control file creation failed
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:658)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:328)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:304)
at oracle.apps.ad.clone.ApplyDBTier.<init>(ApplyDBTier.java:154)
at java.lang.reflect.Constructor.newInstance(Native Method)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
at java.lang.Thread.run(Thread.java:479)
I found note no. 375389.1 similar to this issue.
Any body guide me, about solution no-1, how i can apply it.
after running perl adcfgclone.pl dbTier
my DB is on above mentioned stage....

SQL*Plus: Release 10.2.0.4.0 - Production on Sun Feb 13 21:52:19 2011
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to an idle instance.
SQL> startup mount;
ORACLE instance started.
Total System Global Area 1073741824 bytes
Fixed Size 1271540 bytes
Variable Size 427821324 bytes
Database Buffers 633339904 bytes
Redo Buffers 11309056 bytes
Database mounted.
SQL> recover database using backup controlfile until cancel;
ORA-00283: recovery session canceled due to errors
ORA-00600: internal error code, arguments: [kcvhvdf_1], [], [], [], [], [], [],
SQL>

Error in Assets creation in AS01

Similar Messages

Maybe you are looking for