Error in assigning a user to alert profile

Hi All,
I have created a alert and written a macro for that.
When I am trying to assign alert profile to a user, I am getting error as in attached screen shot.
I am doing simple steps using F4 and all necessary values are available in radio buttons.
Please help.

Hi Hemant,
As per your error, i see that it only accepts F4 values.
There is another alternative, drag and drop in AMON1
Regards,
JB

Similar Messages

  • Assigning users to alert profiles in APO DP

    I am using APO DP V5.
    I am trying to understand the relationship between users and alert profiles.
    There is (a) transaction /SAPAPO/SDPALPR to assign users to alert profiles and there is (b) the assignment of alert monitor settings as 'favourites' in the alert monitor.
    How does one use (a) and (b) in a sensible way?
    Thanks, Bob Austin

    Hi Bob,
    In transaction /SAPAPO/SDPALPR you can assign one alert profile per type (SDP used in DP and SNP) per planning area. So basically each user is assigned to one alert profile only. This will be the profile in Interactive Demand Planning where you can switch on the alert profile (comes at the bottom of screen below the keyfigures).
    On the other hand you can access Alerts in the stand-alone Alert Monitor. There the user can have favorites which determine the functional area for which sees alerts (like DP SNP or Forecast or PPDS etc.).
    So if your end-user is going to use Alert Monitor only through Interactive Demand / Supply Planning go for option A. But if he will use the Alert Monitor (Txn /SAPAPO/ AMON1) then go for option B.
    Hope this helps.
    Thanks,
    Somnath

  • Error in RFx with user-specified status profile

    Hi experts,
    I am having an issue in SRM 7.0 creating status profile for RFx.
    When I try to create a new RFx, I get an error screen with message "Status profile ZCCP is not allowed for "Bidding Header""
    In order to configure this, I went through the steps described in SAP Library:
    1- Define user-specified status profiles in Customizing for Supplier Relationship Management under SRM Server->Cross-Industry Functions->Application Settings->User-Specified Status->Create Status Profile for User-Specified Status:
    I created status profile ZCCP with the following data:
    10     SUSP     Suspended     10     90     1     1
    90     HABI     Abilities 10     90     1     1
    and I assigned the status profile to object type "Bid Invitation Header (PS_BBP)"
    2- Assign user-specified status profiles to procurement documents in Customizing for Supplier Relationship Management under  SRM Server->Cross-Industry Functions->Application Settings->User-Specified Status->Assign User-Specified Status Profiles to Purchasing Documents
    I created a new entry with:
    BUS2200     H Header     0     ZCCP
    3- Assign user-specified status profiles for each transaction type in Customizing for Supplier Relationship Management under  SRM Server->Cross-Application Basic Settings->Define Transaction Types
    I assigned the status profile ZCCP to all relevant operation types of obj. type BUS2200.
    Does anyone know where this went wrong??
    Thanks in advance!
    Regards,
    Joã

    Hi joa
    http://help.sap.com/saphelp_srm70/helpdata/EN/e8/70ff4187526430e10000000a1550b0/frameset.htm
    You can use Status Management for records and documents. In Customizing, define the status values and the permitted sequence of these values. Users can then set these status values as attributes for records or documents.
    The following Customizing steps need to be performed for Status Management:
    ·        Status value definition
    To perform this step, choose IMG activity Customizing for Status Management -> Define Status For more information, see the online documentation for the IMG activity.
    Status profile definition
    To perform this step, choose IMG activity Customizing for Status Management -> Define Status Profile. For more information, see the online documentation for the IMG activity.
    Status network definition
    To perform this step, choose IMG activity Customizing for Status Management -> Define Status Network. For more information, see the online documentation for the IMG activity.
    ·         Assignment of a status profile to an element type
    For element types whose elements you want to use Status Management for, assign an existing status profile to connection parameter STATE_PROFILE_ID. (The connection parameter is only offered for records and documents.)
    Subsequently, users will be offered the attribute Status in the attribute maintenance dialog box whenever they edit the elements in question. Input help contains the status values that you have created.
    If you want to use Status Management for the API, you require the following authorization objects: S_SRM_STAT, S_SRM_ST_P and S_SRM_ST_N.
    br
    muthu

  • Error while assigning the user to orgunit and position

    Hi,
    We are having the below issue :
    1.       Obtain the HR master record (P Ids) created by interface - ECC
    2.       Assign a valid user to this HR master record -ECC
    3.       Do the position/Org assignment against this P Id or personnel master record - ECC
    4.       Transfer the Org Id, then the position ID and then the personnel master ID (P Id) to SRM u2013 ECC
    5.       Check if the user is in SYNC in SRM  - Ideally he should inherit the mandatory parameters from the above Orgs in the structure without which he shall not be able to shop in SRM u2013 step executed in SRM
    Please let us know if this process is as per the expectation.
    If so, we are ending up with error in the third step where the assignment is not allowed since the personnel master record is created with prior date than the position and the Org units.
    Actually we are getting the idoc with user alone from other system, org and position ids are blank. So we are assigning the user in the system and we are getting above error.
    Is this the correct process to bring the users alone into the system and doing the position/organization assignment in ECC now?
    Or the Idoc comes with this data as well? 
    Regards
    Venkatesh P
    Edited by: Venkatesh Padarti on Mar 5, 2012 5:33 AM

    Thank you vikas for your reply.
    So we should bring all the data in the idoc(O,S,P). Even though O, S are present in the receiving sytem?
    Regards
    Venkatesh P

  • VDI 3.1 EA - Internal Error when assigning a user to a pool

    Hello:
    I'm hoping somebody can help point me in the right place to troubleshoot this. I'm using OpenLDAP and I've changed my LDAP filters so I can search for the users but when I select the user and click on the 'OK' button, it pukes out with an Internal Server Error and a stack trace that some Java exception threw.
    I don't know what the problem is or what direction to even start looking...
    -K

    I figured out what my problem was. I needed to set my group filters for ldap. As soon as I set all of my group filters it stopped crashing on me. It's interesting that it crashed but basically if I had followed the direction it would have worked the first time. I stopped after I set the user filters.
    I would post all of the filters I set but since they are specific to my LDAP setup they wouldn't do anybody else any good.
    But understanding LDAP filters in general and then reading this page completely should keep others out of trouble.
    http://wikis.sun.com/display/VDI3dot1/How+to+Edit+the+LDAP+Filters+and+Attributes
    Thanks anyway!

  • Password expire date back to 2011 from 2012  after assigned  a user profile

    Friends,
    I created a profile test as
    COMPOSITE_LIMIT UNLIMITED
    SESSIONS_PER_USER UNLIMITED
    CPU_PER_SESSION UNLIMITED
    CPU_PER_CALL UNLIMITED
    LOGICAL_READS_PER_SESSION UNLIMITED
    LOGICAL_READS_PER_CALL UNLIMITED
    IDLE_TIME 60
    CONNECT_TIME UNLIMITED
    PRIVATE_SGA UNLIMITED
    FAILED_LOGIN_ATTEMPTS 5
    PASSWORD_LIFE_TIME 120
    PASSWORD_REUSE_TIME           60
    PASSWORD_REUSE_MAX           30
    PASSWORD_VERIFY_FUNCTION NULL
    PASSWORD_LOCK_TIME 1
    PASSWORD_GRACE_TIME 7;
    the user default profile default PASSWORD_LIFE_TIME is 180 and password expired date is 1/7/2012. the test account was created in 7/11/2011.
    Now I assign test user to test profile successfully.
    However. expire date becomes 11/8/2011 1 from 1/7/2012 by select dba_users
    which wrong is in my profile or somewhere?
    As I think, the account password expired should be start after assigned new profile with PASSWORD_LIFE_TIME. but is seems expire date is start from original account created date.
    Thanks
    newdba
    Edited by: Oradb on May 24, 2012 1:56 PM

    I would think the expire time would be based on the last password change time which Oracle stores in the rdbms base table for user information (user$). Find a second user, alter the password, check the expire date, then assign the user to the new profile, re-check the expiration date. Post back. Behavior may vary between releases so include full Oracle version of test.
    HTH -- Mark D Powell --

  • Error while assigning user to a position

    Experts,
    I m using SRM 3.0 with classic scenario. I would like to assign a user to a position but could not able to eventhough there is BP record. I could able to do the assignment in sandbox but not in the PRD with similar case.
    Also If I use users_gen( Create users using existing SU01) it is throwing Error "central person already exists".
    Please throw some input whether what could be the problem and possible solution.
    Thank you,
    Manyam

    Hi Cordula:
    I have the solution to fix your user. It is a crude methodology but it works. I have seen that error "central person already exists" many times and i have fixed it successfully.
    step 1: The first step is to delete the existing assignment of the user from the org structure.
    Step 2: The second step is to delete all ties of the user with his present business partner Number from transaction BP. In BP go to identification and remove his user id and save.
    Step 3: Now before you use USERS_GEN to assign the user from existing SU01 ID, you would also need to delete his SU01 user ID. This is because the existing SU01 ID has ties with his previous assignment to the EBP org structure
    Step 4: Recreate his user ID in SU01. System will ask you that SAP has the old office data and you can copy the data from his old office data which saves you the pain of enetring address overview tab. Go and maintain his roles and profiles section and save the user ID.
    Step 5: Now you can use USERS_GEN to assign him to a organisational unit from existing SU01 id and you will see the activity to be carried out successfully !!!!:)
    Please assign points if answer helpful and also confirm results and share your views with the forums.
    Thanks
    Sunny

  • Error message: User has no profile definition

    Hello,
    When I try to run a custom transaction (related to SU assignment- program SAPLSHL2), I get an error message
    " User has no profile definition"
    Could you please explain what it means and how it could be corrected?
    The SU53 analysis shows authorization checks to be successful.
    Thanks in advance!

    you are getting error bcoz of the program below,
    Form  USER_OWN_DATA
    read data of active user into header line of lrf_wkqu
    FORM USER_OWN_DATA CHANGING LRF_WKQU LIKE LRF_WKQU.
      CALL FUNCTION 'L_USER_DATA_GET'
           EXPORTING
                I_UNAME        = SY-UNAME
           TABLES
                T_XUSER        = XUSER
           EXCEPTIONS
                NO_ENTRY_FOUND = 01.
      IF SY-SUBRC = 0.
        READ TABLE XUSER WITH KEY STATU = VER_ON.
        IF SY-SUBRC = 0.
          MOVE-CORRESPONDING XUSER TO LRF_WKQU.
        ELSE.
          MESSAGE E191 WITH SY-UNAME.
        ENDIF.
      ELSE.
        MESSAGE E192 WITH SY-UNAME.
      ENDIF.
    ENDFORM.                               " USER_OWN_DATA

  • Error While Assigning Approval Management Roles to User

    Dear All,
    While assigning "Approvals Management...." Roles to the user through User management responsibility and Click on to Apply Button I am getting following Error.
    oracle.apps.fnd.framework.OAException: java.sql.SQLException: ORA-01403
    ORA-06512: at "APPS.UMX_ACCESS_ROLES_PVT"
    Can anybody help me to get rid of this error.
    Thanks In Advance
    Jithindev

    Hi,
    Standard roles are not assigned to users directly.Make sure that copy the role from standard roles then change naming convention like your company specification.
    Ex: standard role : SAP_BC_JSF_COMMUNICATION_RO
    Step:1: go to t-code: PFCG and give the role name in role tab SAP_BC_JSF_COMMUNICATION_RO
    Step:2: press copy button and change the naming convention.
    Step:3: Assign to the user.
    I hope it will help you.
    kiran kumar.v

  • Error while assigning the fallowing role to the user

    Hi,
    ERROR 2007-01-18 14:13:25
    CJS-30196  Role SAP_BC_JSF_COMMUNICATION_RO is not assigned to user SAPJSF
    i am getting the fallowing error while trying to assigning the fallowing role to the user any body through some light in to it.
    Thanks
    kiran.B

    Hi,
    Standard roles are not assigned to users directly.Make sure that copy the role from standard roles then change naming convention like your company specification.
    Ex: standard role : SAP_BC_JSF_COMMUNICATION_RO
    Step:1: go to t-code: PFCG and give the role name in role tab SAP_BC_JSF_COMMUNICATION_RO
    Step:2: press copy button and change the naming convention.
    Step:3: Assign to the user.
    I hope it will help you.
    kiran kumar.v

  • Error in Windows 7: User Profile Service was not logged on. The user and administra​torprofile

    Error in Windows 7: User Profile Service was not logged on. The user profile can not be loaded. Administrator profile and the code does not work. What do I do?
    HP G5384sc desktop pc

    Hello
    Unfortunately I did not manage to fix my computer yet. My printer is broken so I bought a new one, but since I do not have administrator rights, I can not connect the new printer, so I have to write all-installing notes down with pencil and simultaneously translate them into Danish so it is a very slow process. I'll tell you if it succeeds, otherwise there is of course the primitive way to buy a new computer, but it's the same as giving up. Not yet.
    Until now, many thanks for the good suggestions.
    Kind regards
    Birgeres

  • Error Message: User has no profile in this organization

    Error Message: "User has no profile in this organization."  
    Chrome browser.  Am downloading Mozilla in the meantime and will report after.
    Attempting to log into various TV subscription cable channels with a valid ID and password which ordinarily allows me to enter the on lne version of the cable channel, such as HBO and TNT and USA.     Works fine on Showtime.     Something is local to these channels, I suppose yet suggesting that something in the computer is blocking also.   Everything worked fine with my HP notebook, all subscription/ login required channels were accessble but this new computer actually refurbished but like new) an HP Elite sff 8000 seems to be blocking me from logging in.   Could it be the cable channels?   Also got a message that indicated something about "User repository".   Please sugget a detailed fix if there is one from this information. 
    HP Elite 8000 SFF, (Desktop) WIN 8.1 Professional, Intel Core 2 Quad 2.83GHz processor. Internal 750GB HDD. 8GB RAM memory. 3 external HDDs : 1TB primary external, 1.5TB backup external, special backup 250GB external (all externals for files, music, video). Please note: 750GB HDD for WIN OS and programs only. Backed up to an 80GB external Image Maker via WIN 7 system image maker. 1 DVDRW drive. 10 USB ports. Plus there are four extra USB via PCI card. 14 USB ports in all. 240 W power supply. Printers: LJ 1020, HP AIO 6480. 3 Monitors, 20" Acer; 22" Acer; 37" LG TV.
    ALSO:
    HP ENVY: 15 ENVY 15634 Laptop 8GB Memory 750GB Hard Drive Natural Silver
    And:
    HP DV6928us, (Notebook)
    AND:
    external 1.0TB HDD, 250GB external HDD, 1.5 TB external HDD,
    AND:
    HP LJ 1020,
    and:
    HP J 6480 AIO,
    Windows 7 Home Premium on Desktop, WIN8 on ENVY

    Did you have any luck with FireFox?
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Error when editing Portal User Profiles

    Hi there,
    I got this error message when editing Portal User Profiles
    Error: The specified user does not exist. (WWC-41406).
    I can select users from OID, but can't edit them.
    Note: these users are imported from AD and placed in a different OU other than users container in OID.
    But, If I create a user in the same OU from Portal Administration page, then I can select and edit that user's Portal Profile.
    So what's the difference between imported users and the user created from Portal?
    Please advise.
    Thanks,
    Geoff

    REPORTSDEV was an invalid user so we dropped this user and started over and now it works.
    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by GREGG SAKSEFSKI ([email protected]):
    I'm tring to edit user REPORTSDEV.
    So I'm on the "Administer" tab and enter "REPORSDEV" in the User box and press <EDIT> button.
    After a couple minuates I receive the error below:
    Error: Unexpected error encountered in wwsec_api.id_sso (User-Defined Exception) (WWC-41417)
    The system failed to retrieve the necessary HTTP request to the Login Server to validate this user. (WWC-41447)
    Any ideas???<HR></BLOCKQUOTE>
    null

  • In mobile data entry geeting erro user has no profile definition

    Hello Gurus ,
    I am trying to logon to handheld to the systme .. i am getting this error " user has no profile definition ..m
    What could be reason for this error ??

    In the configuration Maintain an entry with your user id in the following table
    SPRO--> Logistics Execution -->mobile data entry --> RF Queue Management --> Assign Processor to Queues.
    If an line item already exists, copy that and change the username, if its blank (which will be in a fresh client) input all the parameters.
    If everything is configured properly for ur user id, when you type LM00 it should show you the screen on the RF gun, or else you will get the same error.
    try this, it should work

  • Define Alert Profiles

    Hi Experts,
       I am working on CRM 2007. As per my requirement
      I want to Define Alerts Profiles to make alert on Different Activities Like Discounts and Promotional Scheme.
      So, How I can define Promotional Activities in CRM-2007?
    Thanks,
    Krishna

    Hi Krishna,
    First assign IC_MANAGER business role to ur user id. For that u have to assign this role at organization level. Go to PPOMA_CRM> Assign Position and ur userid to this organization> now choose goto -->there u will find Business Role assignment.
    Or u can take help from ur functional consultant.
    Now when u will login to Web UI u will find IC_MANAGER business rols choose that one , then in navigation bar  u will find a link alert. From there u can generate Alert. There are some sample alert already exist u can take help from them.
    If u don't find alert link in navigation bar then u have to activate this link from Business Role.
    Regards
    Gaurav

Maybe you are looking for