Error in assigning pricing condition in condition generation

Hello,
As a part of configuration, I have to define one pricing condition in CRM with
Usage - PR
Calculation type - B - Fixed amount
which I defined in SPRO-CRM-BASIC FUNCTIONS-PRICING -DEFINE SETTINGS FOR PRICING- CREATE CONDITION TYPE
for trade promotion condition generation.
But while assignig this condition in condition generation type at
SPRO-CRM-trade promotion management- trade promotions- condition maintenance- define condition generation
I am getting an error as
Calculation type B of Condition type 9PP3 is not allowed for Pricing
Message no. CRM_MKTPL_COND_IF086
Request you all to help me in going ahead .
Thanking you in advance
Shailesh

HI Willie,
Thanks for the reply.
But the conditon which I defined is in CRM and not from R3.
As per the requirement, I need to define the pricing condition with calculation type fixed amount in CRM. I defined the condition.
But while assignig this condition in condition generation for trade promotion.
Thanks in advance.
Shailesh

Similar Messages

Error during manuel entry/Change of condition.

Dear friends,
while I am trying to create standard customer order(VA01), I have faced an error message as: Item 00001:Error during manuel entry/Change of condition.
Can anyone tell me solution?
Thanks in advance.

Hi,
Goto to V/08 for your pricing procedure, check for the condition type if it is mandatory condition and / or if it is manual condition.
In V/06, select condition type and check the value for Manual entry field
Hope you get some inputs
regards,
Sagar

Default Pricing in PR00 condition

This is in MTO Quotation Process.....
1.EK01 and Markup are the 2 ITEM condition types which we use without any condition records.
.In pricing procedue
1.STEP-1--EK01 is the cost which reads from UNIT COSTING of the Particular Item.++
2.Step-2--Markup will be applied based on customer and material.++
3. Step-3--Cost + Markup++
4.Step-4ZP00 is the condition type the value of step-3 which populates to condition value field-which is =EK01 + Markup and it is statistical condition type and cannot be edited manually.++
5.Step-4Pr00 priceNow our requirement is that , ZP00 value should be defaulted as our basic price PR00 and if there is no value in ZP00 condition line then it should take ZERO, where in user can enter it manually.
6. This is alternative condition type formulae which has been assigned for ZP00 condition type.
Price difference (WWS)
form frm_kondi_wert_012.
if xworkd ne 0.
xkwert = xworkd - xworke.
else.
xkwert = 0.
endif.
endform.+Can we write Alternative condition type and assign it to PR00 condition in Pricing procedure...saying that Condition value of ZP00 to be flown to PR00 condition, if no value found make PR00 as Zero.
In such case what are the tables i have to consider to tell to my ABAPER and what prcautions i have to take.

I like to suggest below;
1) Remove the statistical check assignment for the condition type ZP00. This means you need to assign the account key similar to PR00.
2) Then assign the step number of ZP00 in the from column for the condition type PR00.
I assume this should pull the value. Since ZP00 and PR00 are assigned before gross value and PR00 comes after ZP00, the system will always consider the PR00 value.
I am just curious, why you need ZP00? Instead you can have PR00 and you can assign the same routine to PR00. I think this is simplest and easily manageable.
Regards,

In import Pricing Proceedure, Some Condition types added to Material Cost

HI,
In Import Pricing procedure, Some condition types (Like Basic Customs Duty,Edu Cess & Hier Edu Cess) are added to material cost. The remaining are not added. What is the configuration to add condition types to Material cost?
Note - we have added FR3 account key for all condition types. Then why few condition types are added to material cost and why others are not added to material cost?
Can any one please help me on this..
Thanks
KB

Assign key "NVV" to those condition types which are to be loaded to material cost.
Hope this resolves ur problem

How to extract values from pricing procedure for conditions in CRM Billing?

I have a number of conditions in the pricing procedure in CRM Billing that I would like to extract to SAP BW. How can this be done?
Is there a standard extractor for CRM Billing similar to the SD Billing extractor "Extraction of SD Billing Conditions" (2LIS_13_VDKON)?
If there is no standard extractor, is there another way to extract the conditions and the related values?
I am using the standard CRM Billing Extractor 0BEA_CRMB already, so maybe an append could solve my problem. How can this be done? In what CRM-tables can I find the values from pricing procedure for conditions in CRM Billing?

you may want to post that last question in a CRM forum... in ECC it would be table KONV

Adhoc Query : Error during selection; check the selection conditions

Hi
We have a report set-up and which we want to run using our adhoc query report tcode S_PH0_48000513
The report, has a few different selection criteria in it to look at all action IT screen data in the system for ee's in specific personnel areas. There is also a criteria to allow us to paste in specific employee numbers we are interested in. The issue I am facing is that over about 3000 ids, the system automatically returns me a message when I click on the Output button to run the report which states:
Error during selection; check the selection conditions
Message no. PAIS206
I am not sure why this is happening. The selection criteria are fine and the other day I ran the report and I experienced no issues. The report ran successfully. Now though, if I try and paste in all the ids I am interested in (about 8000) I get this message straightaway.
Can anything be done to overcome this issue?
Any advice would be much appreciated.
Nicola

Hi
The message in full is:
Error during selection; check the selection conditions
Message no. PAIS206
Diagnosis
A runtime error occurred during dynamic selection.
System response
The runtime error will be caught; no short dump will be created. This error should not occur as a rule. However, very large select statements may trigger the runtime error SAPSQL_STMNT_TOO_LARGE or DBIF_RSQL_INVALID_RSQL. There is no way to prevent this happening. In this case, the error can only be caught.
Procedure
Check the selection conditions to see whether the error was caused because the option "Import from text file" included too many objects in the "Multiple selection" dialog. If this is so, you must limit the number of individual values.

Printing error due to out of memory condition...

hi i got this problem of "printing error due to out of memory condition" and i cannot save it as a pdf file too. How to solve this prob? i using cs3 and acro 9.. pls help me... got a proj due and cannot afford to waste too much time...

I've also seen this error message for the first time today "printing error due to out of memory condition" - I have 2GB of RAM, 300Gb+ free on my hard drive and have closed all other programs that were using some memory, however have had no problems printing to pdf ever before in Indesign... is there a solution to this problem?

Error due to out of memory condition

Hi,
system: Windows XP, 2 GM RAM, Indesign CS3
I placed two files in Indesign: the first is .ai (1.1 MB, probably exported form a CAD program), the second is .psd (53 MB). When I try to print to .ps file, Indesign displays the message: "Export error: error due to out of memory condition". If I: 1. export to PDF, everything is OK, 2. rasterize .ai in Photoshop, then import the resulting .psd to Indesign, print to .ps file is OK.
Does somebody has an answer to my problem?

My gues is "mistakes" was referred to simply not outputting as intended by the designer. I had output issues when going directly to PDF and had to also continue the old way of doing thinkgs by outputting to .ps then distill to PDF. The "mistakes" that occured for me were nearly unnoticed. The publication was a 128+4 product catalog that had a header at the top of each page. I never had any problems outputting in the past. At the time, I just had updated to CS3 (XP Pro SP3 Dual Core 4 gigs ram). I was advised that outputting directly to PDF had been durastically improved. I output my files without "mistakes" or errors, or so I thought. After proofing, I didn't realize that all of the drop shadows for the header headline were not applied. The problem though, wasn't that they were applied to all headers, just beginning at page 60 or so, halfway through. After getting the finished publication back, I didn't notice it for a few months. After noticing it, I investigated. Several troubleshooting hours later (after forum posts and other expert help), I/we concluded that it was simply a program deficiency. During my trouble shooting, I looked at several areas mainly focusing on the transparency settings. I output the document several times. I finally exported each page separately and found that that was the only way that I could output every page to include the dropshadow in each header page (past page 60 or so).
I have been past that issue for a while now. Now I am on Win 7, Quad core, 6 gigs of ram, and don't have the outputting problem that I used to. Now I occasionally get this "Error due to out of memory condition" which is BS because my hardware specs are beyond reasonable for what I typically create in my workflow. Most of the time, my memory is only at about half of its capacity when I get this error. Not when I have a PS open with a large multipage file that I am working on. My out of memory error happens during file output or just when performing ordinary layout functions in InDesign.
When on my personal computer (Aluminum iMac 2.4 Core2 duo, 4 gigs of ram, 512 video, CS4 & CS5) I have neither of the above issues.

Error msg: Enter at least one condition item

Hi SAP,
I try to change (extend) rental end date but i received error msg "Enter at least one condition item":
Enter at least one condition item
Message no. 62226
Diagnosis
No condition items with a positive amount exist. Each condition header, however, must have at least one condition item.
System Response
The system may or may not carry out the function you selected. If the function cannot be executed, the system will output an error message indicating that a condition item is necessary.
Procedure
If the system does not execute the function you selected, you must enter a condition item or an amount for at least one condition item before you choose the function again. Each condition header must have at least one condition item at the latest when you save your inputs.
Actually i had maintained the condition type eg: Electricity (variable type) but with "$0" amount. But i have maintained the sales based rent inside the condition item with minimum rent $2.
My question, is there any way i can proceed with the rental end changes with the condition or scenario i mentioned above?
I will give points for those who help me solve this problem.
TQ
Regards,
Nazrul

Hi Nazrul,
please use transaction FO38 (change active lease-outs) and there set the flag 'cond. not checked'. With double-klick on the flag you can make it changeable. Afterwards the error message should not appear anymore.
Hope that helps.
Regards, Franz

Pricing procedures and condition type table relation

Hi all
i m facing a problem while printing the tax procedures description in debit note and creditt note a Zprogram.
im not able to link between Pricing procedures and condition types , that is how to get pricing procedure from a condition type ? which tables can be used for this?
already i ve checked T007s,t007a,t685t,t683..
how to get the pricing procedures acording to condition type and tax code?
please reply me as soon as possible?
thanks
sachhidananda

Hi,
Check out the Table KONV
This will help u
Rgrds
Sandeep

Set currency value of pricing element in condition tab - VA21

Hi GURU,
Would you please help to identify the way to set the following currency values for pricing element in condition tab when creating system quote by va21:
Rate unit (RV61A-KOEIN)
SD document currency (KOMK - WAERK)
Thanks in advanced,
Regards,
Thang

Solved

B2B: Copy Pricing Procedure or Condition Types

Hello sdners!
I use b2b sap crm: e-commerce 7.0.
Please advice me FM, which copy Pricing Procedure or Condition Types from catalog item to basket (order)!
E.g: i want to buy a position from catalog with the name " A ". It cost 10 eur.
When I click to order - the price of the catalog is transferred to the order (basket).
Please help me find FunctionModule which do it ?
Thanks

Technically the price for the catalog item and the basket item come from two entirely different ways.
Whereas the catalog item gets the price "directly" from IPC (or TREX in some instance), the basket price is computed in the ABAP side of the application. In the ABAP, the item price is again technically comes from IPC, but IPC is provided with some additional information to get the "customer specific" price.
So, in theory, you can not copy the catalog item price using any FM.
Even if you "copy" from catalog to basket (say, in the UI or java layer), the item in the basket will get the price from CRM backend everytime the basket get updated.

Transfer Pricing through PCA condition Types

Hi,
Can any one send me some Documentation on Transfer Pricing Through PCA Condition Types.
Little urgent please
Regards

Hi
Find the following documentation on Transfer Pricing.
http://help.sap.com/erp2005_ehp_02/helpdata/en/eb/13811243c411d1896f0000e8322d00/frameset.htm
Regards,
Suraj

Pricing Schema Header Condition Issue

Dear gurus,
how can I do this?
Item 1:Sales Price:100 eurMWST:18eur
Item 2:Sales Price:200 eurMWST:36eur
In header:
Sales Price: 300eur
MWST:54eur
Total:354eur
There is a HEADER condition as YOFI:
YOFI:355eur
YODI=YOFI-TOTAL
Problem is SAP multiples YOFI(which is header condition) to items.
As a result calculation is wrong.
How can I fix it?
Regards,

You don't want YOFI to be distributed to items correct? If so, then in t.code V/06, for condition type YOFI, remove the checks in the boxes of group condition,item condition, quantity and check by creating a new sales order.
Regards,

Error while updating pricing item

Hi All,
I have an issue to ask, the problem is this issue not happen every time, and sometimes it can solved it self.
We are using SRM 5.0
SRM_SERVER 550 0008 SAPKIBKT08 SRM_SERVER
SAP_AP 700 0008 SAPKNA700 SAP Application Platform
Its about Error while updating pricing item 49ABA6C4998216D9E1000000AC103B65 (document 49ABA6CE998216D9E1000000AC103B65) which i found in SLG1 and SM53.
When this issue occured, all transaction cannot be process, like : transfer ext requirement from R/3 to SRM --> failed , then when generate PO from accepted quotation , the PO net price will be zero.
All the error is the same, error has occured in pricing.
I already check using program
RSVMCRT_HEALTH_CHECK and BBP_CND_CUSTOMIZING_CHECK , IPC is running and all java enviroment message status = green, but if i simulate using a product, it will show error in pricing.
Can you please help to advise if any of you ever facing the same error, your respond will highly appreciated.
Regards,
w1n

Hi,
I think buffer has old condition.
Please run the Function Module IPC_DET_CLEAR_CUST_BUFFER.
OR reset the VMC -> Reset in SM52.
Regards,
Masa

Error in assigning pricing condition in condition generation

Similar Messages

Maybe you are looking for