Error in assigning SID and activation of ODS

Hi all,
Iam loading delta from R/3 to BW ODS and the ODS is not getting activated and shoeing the message as " error when assigning sid ,activation of data records terminated.
This is the message :
Error geeting SID for ODS object
Value 'EXT UP CASH# ' (hex
'004500580054002000550050002000430041005300480009 ') of
characteristic 0REF_DOC_NO contains invalid ch aracters
Request: xxx
Data package: 000012
Data record: 9,431
InfoObject: 0REF_DOC_NO
Activation of data records terminated for the ODS object.
Pls help me out.
with regards,
Mohan.

What has happened is that a Invalid Character "#" has come in a record for the Value of 0REF_DOC_NO because of which the request is not getting activated.
What you will need to do is delete the request from the ODS. Go to the Request in PSA. Open the request look for the record with Invalid Character.
Modify the record by changing the value ...save..and load the request data from the PSA.

Similar Messages

Activating DSO: Error when assigning SID

Hi,
I am loading data from r/3 to BW via PSA till PSA the data gets populated correctly with out any errors, But from PSA to ODS I get the below Errors Can some one help me
Value '0050307 ' of characteristic 0DATE is not a number with 000008 spaces
Error when assigning SID: Action VAL_SID_CONVERT table ZPOD_DATE RSDRO
Error when assigning SID: Action VAL_SID_CONVERT table ZPO_DATE RSDRO
Activation of M records from Data Store object ZSD_O05 terminated RSM1102
Process 000106 returned with errors     RSODSO_PROCESSING     6
Process 000122 returned with errors     RSODSO_PROCESSING     6
Thanks
Abhi

Hi
Thanks fro your immediate response
But in the Error message Value '0050307 ' of characteristic 0DATE is not a number with 000008 spaces" I dont have 0DATE field in my ODS to check
Thanks
Abhi

Error when assigning SID: Action VAL_SID_CONVERT table 0FISCPER

Hi All,
We are getting the following error when activating an ODS:
Fiscal year variant not expected
Error when assigning SID: Action VAL_SID_CONVERT table 0FISCPER
Interestingly, we have two systems for two different phases, on the same BW 3.5 SP level and the corresponding source R/3 SP Levels. BEx reporting is turned on for both the ODSs.
On one system, the ODS get's activated without any issue and on the other, it get's errored out.
I have tried different things like Rebuiding Global Transfer Settings, comparing the data between the two systems, etc., but no use.
Any ideas/solutions?
Thanks,
- Shashi

Marc,
I have checked once and found all the data is correct. I will do that again.
When I tried RSRV checks on 0FISCPER and 0FISCVARNT, I am getting the following message:
0FISCVARNT is not a characteristic but an InfoObject of type TIM
Message no. RSRV209
Diagnosis
The value entered 0FISCVARNT must be the name of a characteristic. However, 0FISCVARNT is an InfoObject of type TIM.
The following values can be types:
CHA characteristic
KYF key figure
TIM time characteristic
UNI unit
DPA package
ATR attribute
MTA meta-InfoObject
Thanks,
- Shashi

Error when assigning SID while uploading text in the info-object of the DSO

Hi
I have a scenario where I need to extract a char 60 field from R/3 in the DSO.
I have created the info-object which is char 60 which has the master data text activated.
In the DSO transformation I have mapped it to the R/3 field.
While activating the data in DSO its giving the error message
'Value '20 per action plan' (hex. '32302070657220616374696F6E20706C616E') of characteristic'
'Error when assigning SID: Action VAL_SID_CONVERT InfoObject ZRMSD '
How to overcome this issue.
Please advise.
Thanks in advance.

Change the InfoObject for this text so that it will allow lowercase letters. To do this, go into Change mode on the InfoObject, go to the General tab, check the Lowercase letters checkbox and activate the InfoObject. After this has been activated, you can then restart your process and this SID violation error should no longer be thrown for this.
If you don't want to do this, then you can use the TOUPPER formula in the Characteristic Routine, in the Transformation, to change the value of this field contents to uppercase. This can also be done by using an ABAP routine like this:
TRANSLATE column TO UPPER CASE.
Edited by: Dennis Scoville on Nov 3, 2009 9:55 AM

Error when assigning SID: Action VAL_SID_CONVERT table 0TYPE

Hi Experts
When I am trying to load the data into DSO the data is scheduling But DSO data is not Activated It Showing Error
messages in Log for request processing in Request tab of DSO Manage.
1.Error when assigning SID: Action VAL_SID_CONVERT table 0TYPE
2.Value 'area' (hex. '61726561') of characteristic 0TYPE contains invalid characters
3.Error when assigning SID: Action VAL_SID_CONVERT table ZCH_O_TYP
4.Value 'area' (hex. '61726561') of characteristic 0TYPE contains invalid characters
5.Error when assigning SID: Action VAL_SID_CONVERT table ZVALUE
6.Value '0000000000000000860452655_PDF_45U x 200' (hex. '30303030303030303030303030303030383630343532363535') of
characteristic ZVALUE contains invalid characters
7.Error when assigning SID: Action VAL_SID_CONVERT table ZVALUE_O .
8.Value '224053 sht 1.pdf##~##000000153363' (hex. '3232343035332073687420312E70646623237E232330303030') of
characteristic ZVALUE_O contains invalid characters.
9.Activation of M records from DataStore object ZCF_O02 terminated
I have tried adding the special character # with transaction rskc but nothing seems to change and
I still get the same error.
DATA: T_ALL(100) type C,
T_VAR1(45) type C value 'ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopq',
T_VAR2(50) type C Value 'rstuvwxyz 0123456789 @#$%^&*()_-+=:;\/?',
temp(60) type c,
cnt type i,
length type i.
clear : cnt,temp,length.
break-point.
temp = SOURCE_FIELDS-TXZ01.
CONCATENATE T_VAR1 T_VAR2 into T_ALL.
cnt = 0.
length = STRLEN( temp ).
IF NOT temp CO T_ALL.
WHILE cnt < length.
IF NOT temp+cnt(1) CO T_ALL.
CLEAR: temp+cnt(1).
ENDIF.
cnt = cnt + 1.
ENDWHILE.
ENDIF.
translate temp to upper case.
RESULT = temp.
i am getting the above error, one of the expert suggested to implement this code but i am getting some errros when i execute this one please can anyone check this code and correct the errors it would be help ful to me.
Regards
Venu

Hi ,
Implement this code to resolve the issue.
You can use the sample code below to choose only the charachters to be allowed in for the field. Using that you can remove all special charachters and # symbols as required
DATA: T_ALL(100) type C,
T_VAR1(45) type C value 'ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopq',
T_VAR2(50) type C Value 'rstuvwxyz 0123456789 @#$%^&*()_-+=:;\/?',
temp(60) type c,
cnt type i,
length type i.
clear : cnt,temp,length.
break-point.
temp = SOURCE_FIELDS-TXZ01.
CONCATENATE T_VAR1 T_VAR2 into T_ALL.
cnt = 0.
length = STRLEN( temp ).
IF NOT temp CO T_ALL.
WHILE cnt < length.
IF NOT temp+cnt(1) CO T_ALL.
CLEAR: temp+cnt(1).
ENDIF.
cnt = cnt + 1.
ENDWHILE.
ENDIF.
translate temp to upper case.
RESULT = temp.
Regards,
Rahul.

Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0BP_ACTIVIT

Hello Team,
WE are facing the error"Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0BP_ACTIVIT" .Please see he below screen shot.
Every day the failure is for a different value and this is fixed with the manual activation of he DSO, with out any change .
Below are the steps we have tried:
1. The RSRV tests for the info objects were consistant. We have done he below rsrv tests:
a. Compare characterstic of P/Q table with X/Y tables.
b.SID values in X and Y tables.
2. We have changed the DSO setting from Parallel to Serialized Activation.
Also the format of the values are as per the designated type.
One more thing which i noticed is , the values for which the failure occurs , are new entries to the DSO, and they do no exists in the Change log table.
Please let us know , what else can be done to fix this issue.
Thanks in Advance,
Nikhil

HI Nikhil,
please go through the documents.
http://scn.sap.com/thread/1820047
http://scn.sap.com/message/14266151
http://scn.sap.com/thread/1520825
Regards,
Abdul rAwoof Syed.

Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0FISCPER

Dear experts,
I'm getting this error when activating an DSO.
I'll try to explain when this error happens.
I have a DTP in Delta Mode between 2 DSO's.
The first time I run the DTP the DSO activates with no problems.
The next time I run the DTP and it gets data the activation of the DSO has the error: Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0FISCPER
I've googled it but I can't find a solution for this.
The first time I got this error I've deleted the DSO anda loaded the Data again and got no errors.
The next Delta that has Data gave error when activating the DSO.
Whan can be happening here?
Best Regards,
Rui Romba

So you want to say that data loaded successfully in DSO 1 and while activating data in DSO2 you are getting this error.
DSO1 feed data to DSO2 correct.
Please check if generate SID upon activation setting is checked in DSO1 or not.Because if its the issue with fiscal year period then it should have given the error at DSO1 itself provided that setting is maintained.
I just stumbled upon a document which addresses this issue and it seems the problem is with fiscal year variant.
Check out the document:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0a5a670-13f6-2c10-179d-a35e50a208bf?quicklink=index&…
Regards,
AL
Message was edited by: Anshu Lilhori

While uploading the flat file getting Error when assigning SID

Hi ,
while uploading flat file i getting thid error .
Error when assigning SID: Action VAL_SID_CONVERT table 0FISCPER and No SID found for value '0 ' of characteristic 0CURRENCY

Hi Bijender,
This is related due to missing values in your currency tables.
If you are maintaining the currency tables from R/3 - Replicate the Currency Rates(Source sytem- Transfer Exchange Rates).
& check if the missing value is available in the TCURR table.
Thanks,
ChandraDeepak

How to take a report for the assigned transaction and activity in a role

Hi Colleagues,
I want to take a report for the assigned transaction with activity for all roles, which are assigned to the users,
Transaction list for a role i can able to take it from SUIM but not able to take the ACTVT for the role.
Please suggest how to take this information.
BR,
Jai

Hi Jaikumar from the post :
I think you have reached the state of finding the USER to ROLE relationship
Take the output to an excel,
COPY just the roles column exactly in order do not rearrange , use AGR_1251 like other experts have mentioned
insert the roles copied from you buffer and execute, the output will have multiple entries for each role take the output to an EXCEL again , make it unique and match the outputs between both the EXCELS.
It will be a little tricky to do this, but I think you are proficient in MS EXCEL.
This is one of the ways to do , there are many other ways to do it.

Error when assigning SID

Hello Gurus,
I have created a characteristic infoobject(ZCSHIPTYP) for Shipment type and included the same in the ODS.
When I load data, during activation it gives the foll error :-
By default, only the following standard characters are valid in characteristic values:
!"%&''()*+,-_0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ
./:;<=>?
Characteristic values that only consist of the character "# or that
begin with "! are not valid. If the characteristic is compounded, this
applies to each partial key.
You are trying to load the invalid characteristic value Air Cargo &
(hexidecimal representation 41697220436172676F ). This is not permitted.
this is not a master data. i have included this text in the 2lis_11_vahdr and written a user exit to populate values. the data is also coming. but during ods activation the above error occurs.
Pls guide.

MM,
No, I don't think so.
ALL_CAPITAL will allow you to use capital letters of the national codepage.
For more info look here:
Permitted characters 'ALL_CAPITAL'
Re: Special Characters in BW RSKC setting
And also OSS Notes: 173241 and 194328.
Best regards,
Eugene

Error when assigning SID (details in long text) RS

Dear Friends,
while loading GL data to ODS In the last stage of load i am getting this error.cannot able to load. need urgent help i will assign points.
Sampath

Hi,
Find out the Record and package number by looking into PSA table with selection on the request number and infoobject for which you are getting the mentioned error.
To know the PSA table name , switch on technical name after you select Show Data flow option from the context menu of ODS.
Once you know the record number , you have to modify it in PSA and you need to reupload from PSA and reactivate the request.
With rgds,
Anil Kumar Sharma .P

Error when assigning SID: Action VAL_SID_CONVERT

Hi All,
I have an Issue with the Unicode Text.. I am trying to load data into ODS.
Able to get Data till New Data Table. The data is not getting activated due to the following error.
Value 'Шитов' (hex. '00200020042804380442043E0432') (suspect to be some Russian Characters) of characteristic XXXX contains invalid characters.This is not a master data. It is a field usually entered by the users while creating a Sales Order.
I did try maintaing characters in RSKC . I also tried All Capitals and All Captials plus Hex.
Can somebody suggest how to proceed. I did check all the previous threads .. But none of the response solved the problem,
Thanks in Advance.
Regards,
Harika

Hi,
but its not a good solution.
if there is going to be any selection variable for this object in future then system will treat small and capitals as different and users will have to specifially maintain the entries in particular case while giving input.
So you should go for it...if you are sure that you will never use it for selections or using filter values in report.
Thanks
Ajeet

To know how to find the Creation date, Assignement date and Activation date

Hi All,
    Can you please guide me to find the answer for the below mentioned questions:
Apart from Change log ,
1, Creation date
     May I know is there any approach to find the Creation date of a particular Pricing condition type.
2. Assignment date -
    How to find the assignment date of a particular condition type to a pricing procedure.
3. Activation Date -
    May I know is there any to find out the date of Activation for the Customer hiearchy in T code VDH1N
Presently I'm working on SAP ECC 6.0For the above question I tried T codes and table but I'm not able to find out exactly. Even in Change logs I'm not able to get it.
Can you please guide me where I'm missing.
Thanks in Advance
Thanks & Regards,
Pugal

Hi,
Something like this
select table_name, created from user_objects where object_type = 'TABLE'Regards
Anurag Tibrewal
Oops: I did not see the requirement correctly. If auditing is not the option for you then logminer (if archive is present) else no other option i can think of.
Edited by: Anurag Tibrewal on Oct 6, 2009 8:37 PM

Errors of invalid characters in activating the ODS..Urgent

Hi All,
I have an urgent requirement.
When I try to Activate the ODS its Complaining of invalid characters that too if the BEx reporting flag is selected.
Ex: 1. 'INT-Interruption'
2. 'CSEPResDate'
3. 'Repair Service Escape'
I have checked in RSKC and added ALL_Capital and also - but no use.
Could anybody help me in supplying any code as I am very poor in ABAP to overcome the above .
Thanks

Hi Suryam,
Please check this thread as well for routine,
how to write a routine in bw for converting lower case to upper case?
Hope this helps,
Thanks,
Sudhakar

Error Assigning SID-cannot load data in ods

Hi
I have data in ODS coming from R/3.
Uptil today data was loading and working fine.
When i tried to load the data today, i am getting an error. Data is in PSA
Data is also seems to be in ods, because the request is in red color, but reporting icon is still available.
and Datamart status is empty.
I checked the call log and found the following error.
Overview of Call log is as follows
Activation of Data
SID Generation
Data package 3 : Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0DATEFROM
Value '01012009' of characteristic 0DATE is not plausible
Data package 6: Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0DATETO
Value '31122009' of characteristic 0DATE is not plausible 1
Rest all packages for the various infoobjects are loaded successfully
I think there is a problem in data, but i dont know how to resolve the issue
please help
Regards

Hi,
The problem that you are facing is that your format is YYYYMMDD and you are trying to load data in format DDMMYYYY.
The error is the current request, you dont need to touch anything else. As i said earlier, goto the RSMO transaction, find your failed load. Click on it. On the right side of your screen, you will get the individual monitor, which has a status tab. On this tab, there would be a button which says error message. Click on it.
It will give you several messages. If you scroll to the right, there would be a ? symbol for long text. Click on it.
This will give you further info. One of these messages will have the record no and package no. You need to check all messages. Then go to your PSA, to the same package and record and check the date format
Another way is to goto SE16-> find the active table of your DSO, it will be named as /BIC/A<DSO NAME>40
Search the respective date field for the value thrown in the error, or you can use the record no obtained from above to find the value. Find the key fields and note them down.
You then need to delete the incorrect request from your DSO. You can then correct the incorrect record in your PSA ,using the key fields,save and reconstruct this request.
Hope this helps.
Regards.

Error in assigning SID and activation of ODS

Similar Messages

Maybe you are looking for