Error in Assigning Source System
Hi All,
I am getting an error saying that
<b>Communication structure 0ACCNT_GRPV does not exist
Message no. RSAR309</b>
This is after I have created an Infosource and trying to assign a datasource .
Pls Suggest ..what can be done..
Thanks in Advance,
Ashish.
Hi Ashish,
Have you successfully installed the infoobject 0ACCNT_GRPV from business content?
The name implies that it was a standard business content object, hence should be installed from the business content. Since this infosource is with direct update, you should also get the underlying communication structure with the Business content activation. I checked in our system, and this infosource is assigned to the datasource 0ven_accnt_grp_text.
Also, you might want to run the program RS_COMSTRU_ACTIVATE_ALL by specifying the name of the infosource i.e. 0ACCNT_GRPV for activating the inactive communication structure, if any.
Hope it helps,
Sree
Similar Messages
-
Error while assigning source system to SAP Remote cube
I need to do a query using remote cube and the source sys is flat file.
it wont let me assign the source system to the remote cube.
the r/3 system icon is seen next to the remote cube technical name...
I can't see my flatfile source system
can somebody help me.Hello Kiran,
I don't think its possible to use Remote cubes for PC_FILE or FLAT FILE as Source system.
You can use Virtual Providers in these different scenarios
Virtual Providers based on DTP => used for SAP source systems
Virtual Providers based on BAPI => used for non-SAP or external systems
Virtual Providers bsaed on Function modules => You use this VirtualProvider if you want to display data from non-BI data sources in BI without having to copy the dataset into the BI structures. The data can be local or remote. You can also use your own calculations to change the data before it is passed to the OLAP processor. This function is used primarily in the SAP Strategic Enterprise Management (SEM) application.
Use InfoObects as Virtual Providers
Your case is none of these.
More details can be found under this link:
http://help.sap.com/saphelp_nw70/helpdata/EN/84/497e4ec079584ca36b8edba0ea9495/frameset.htm -
Assign Source System to Source System ID
Hello Experts,
I am loading master data from flat file (which is an export from another BI system Info Object) in which one of the attribute is SourceSytem ID (0SOURSYSTEM). But in the flat file some of the records for this particular attribute are blank and some are with R3. So the records which are without any sourcesystem ID are not getting loaded.
Error is as follows: No source system ID exists for source system (logical system) FLAT_FILE.
Detail Error: Procdure: Assign source system ID to logical source system FLAT FILE. To do this go to TOOLS--> Assign source system to source system ID from main menu of DWB.
Can anyone tell me what exactly I need to give at this place. Any two digit char or do I need to contact basis to follow any specification?
Thanks for your time.
Experts please let me know how I can proceed loading flatfile data which i got from another BI system.
Edited by: saptrain on Apr 5, 2010 7:52 PM
Edited by: saptrain on Apr 5, 2010 7:53 PM
Edited by: saptrain on Apr 5, 2010 7:53 PM
Edited by: saptrain on Apr 5, 2010 11:07 PMHi,
What exactly does this attribute does while reporting?
Usually if you have 2 source system then this attribute is used to differentiate between to source systems. You have to use this is report to restrict to particular source system
I am assuming it will just differentiates the data that we loaded either from R/3 or FF or something else. Is that right?
Yes, You are right
Apart from that is there anything useful in reporting point of view?
Everything is based on reporting. Mostly you will use this when you are having two source systems. Ex: ECC and CRM for 0BPARTNER info object
It doesnt matter if I give any two chars(as u said) right?
No it doenst matter. You have button called something "Suggest ..." you can use that. Other wise you can give your own name
thanks
Srikanth -
Question to assigning Source System for Activation
We want to assign source system for activation, before business content-InfoObject catalog activation. The steps as follows:
1.On the Data Warehousing Workbench: Business Content view from the menu choose Edit  Source System Assignment.->This step is ok, no question.
2. In the Choose source system by default? dialog box select the checkbox in the column Default assignment in the row containing the source systems you need to load data from.->Now we can see BI system as default call DEGCLNT500 displayed, in my case we only connect one R/3 system call DHHCLNT100 to BI system.
So, the question to that is shoud we select both R/3 source system and BW source system as default or just select R/3 source system as default and dis-select BW source system?
Which one should we choose, both or only R/3 source system?
Pls help, thanks!Hi hi ni,
If what you are activating it's going to retrieve data only from R/3, then select R/3 and uncheck BW.
You can change this whenever you want, if in the future you need bw, before activating, you can change it.
This doesn't means where is going to get the data from, this is just to look for active (and replicated) datasources to connect to the business content you are activating.
Hope this helps.
Regards,
Diego -
Conversion factor error in the source system
Hi All,
I got conversion factor error in the source system, when i tried to load maste data.
can anybody help me in. It is urgent please...
Thanks in advance
NarendraHi...Post the error
Regards -
Which types of errors occured in "source system"?
hi
which types of errors occured in "source system"? how will correct it? send me data on itHi,
The common error will be RFC Connection .pls chk this links;
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a61e5e07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/bp_biv335/BI_EN/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
Hope this helps.
Regards
CSM Reddy -
IP failed due to errors in CRM source system
hi
After executing IP full load for data source 0crm_oppt_h, i was unable to get the records( 0 records from 0). i checked in crm dev side in rsa3 , i am able to get the records there. so i have deleted the datasource and replicated once again. After activating update rules and transfer rules properly i have scheduled the IP, i am getting error message as ' error occured in source system '.
I have no selections is IP. I have checked the Idocs, trfc and the source system is connection is ok
I have checked the job in source system , It is cancelled. the job log is given below. I want to know how to correct this and what the steps i need to take futher. I am new to CRM . Please guide me
'You are not participant in the private activity CRM_ORDER 027 E'hi
After executing IP full load for data source 0crm_oppt_h, i was unable to get the records( 0 records from 0). i checked in crm dev side in rsa3 , i am able to get the records there. so i have deleted the datasource and replicated once again. After activating update rules and transfer rules properly i have scheduled the IP, i am getting error message as ' error occured in source system '.
I have no selections is IP. I have checked the Idocs, trfc and the source system is connection is ok
I have checked the job in source system , It is cancelled. the job log is given below. I want to know how to correct this and what the steps i need to take futher. I am new to CRM . Please guide me
'You are not participant in the private activity CRM_ORDER 027 E' -
Error while creating source system entry in SAP BW system
Hi,
I am creating source system entry in SAP BW system for ECC system.In T-Code RSA1 i entered all the details of source system and BW system like RFC destination of source system and RFC user passowrd.
After clicking on enter system is promting me to enter into the souce system using administrator user.but i don't have admin user with SAP_ALL and SAP_NEW profiles because in my organisation they don't assign these profiles to any user.
So can you please update me what are the authorization required for dialog user in source system.
Regards,
GauravI would recommend to create a USER ID as COMMUNICATION type and assign SAP_ALL for it... this way, it can never be misused..
This will ensure that the user ID will have correct authorization in the source system and will not face any authorization related errors later on -
BE3.5 : Error from the source system while activating the transfer rule
When I was trying to activate the transfer rule for one info object( charateristic with master data) , I got the following error in [[ ]]
Error when creating transfer structure /BIC/CCPIZGR00CC_ATTR in source system CI2220
Diagnosis
An error occurred when creating transfer structure /BIC/CCPIZGR00CC_ATTR as an IDoc segment in source system CI2220 .
System response
The action was terminated. No data was changed.
Procedure
Use the generation log in source system CI2220 to identify the error, and remove the cause.
CI2220 is the backend R/3 system, I had no issue in replicating the data source etc. this error occurred while trying to activate the transfer rule after assigning the info source to the replicated datasource in BW.
Can anybody tell me how to view( what transaction etc) the generation log to understand the issue?
Thanks in advance
ArunabhaHi Arunabha,
I would confrim that there is no issue with the datasource in your r/3 system. Can you run the datasource on your r/3 system with no errors using RSA3?
If the datasource is ok, then I would check out the error message number in OSS or SDN. I have seen this error before, I just cannot recall what the fix was.
Cheers! -
Error while creating source system in BI: Modification not possible
Hi All,
We are about to move to production, and therefore it's necessary to create in BI the source system related to our ECC (R/3). While trying to perform this action from BI side we received the error message:
SAP system has status 'not modifiable'. Because of this, and following with known consultants practices we've changed the client to customazing but it still not working although the message at this time is: Changes to repository or cross-client Customazing are not permitted. We have also verified transaction SE06 but it's not possible to change the Cross-Application Component to Modifiable.
Did someone face with this same problem before?
Thanks to all in advance,
Regards,
José.-Hi Rick,
I really appreciate your quick response. We followed your recommendation and could create the source system without problems. Thanks once again!
Best Regards,
José.- -
Error message from source system
Hi All,
We have an infocube and ods which is being loaded from another ods. This is included in a process chain.
In the process chain the Infopackage execution step has failed. When I right click and go for display messages, I found the following message in Messages tab:
Error message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the
And in Indiv Messages tab,
Delta upload is only possible after successful initialization.
Errors in source system.
I tried to update the data targets from the initial ODS manualy but in vain.
Any Help is awarded with points.
Thanks
APHi,
Goto Info pack -> on menu bar select scheduler -> select init options for source system -> one request with green status -> select it and click on delete symbol , it will delete the init. you can cross verify this in the base ODS where you dint find data mart status(after refresh). now select init delta process under that select init without data transfer and schedule the load it will update one record and init flag to your source ODS.
Note: if the last request is not updated from soruce ods to targets for that also you will find data mart status for this select the particular data mart -> click on delete symbol it will delete for the particular request (if it is updated to target it will not allow you to delete) then do delta load it will update the request which is not loaded from source ods to next targets.
Regards
Sankar -
Error while creating SOURCE SYSTEM
Hi All,
I have a problem while creating Source System to a Solman syatem configured with BW content. I have configured few some source systems already in the same Solman System.The system shows the following error, previous to this i get the message a "generating connection to the source system"
<b>Error in source system RXX_100
Message no. RSAR502
Diagnosis
With Remote Function Call to system RXX_100 error Screen output without connection to user. ccurred.
Procedure
Remove the cause of the error.</b>
Kindly provide me suggestions and DOCS related to the same.
Suitable points will be awarded for replies.
Expecting your kind reply,
VineethHi ,
In SCC4 the source client should not set as production when creating the source system connection between two systems.Please check below SAP note
973555 - System must be open for creating/connecting source systems
Thanks,
Shanaka -
Error while assigning Business Systems in Integration Directory
Hi,
I'm getting an error when trying to assign the business systems in the integration directory.
The error i'm getting exactly is "access to object list of type BusinessSystem using the internalEOAService BusinesSystemAccessor failed " .
I've cleared the SLD_cache and checked it but the same error.
The business systems are appearing when i tried the transaction code SLD_CHECK and is in green status.
what might be the error.Hey
just want to make sure,are u using communication channel with party or without party.
also make sure that user has sufficient authorizations
http://help.sap.com/saphelp_nw04/helpdata/en/c4/51104159ecef23e10000000a155106/content.htm
Thanx
Ahmad
Message was edited by:
Ahmad -
Error while loading source system data
BW unknown in source system
The BW IDoc type ZSBA003 is not the same as the source system IDoc type
The following errors occurred in the source system:
EDI: Partner profile not available
Entry in inbound table not found
Entry in outbound table not found
Entry in outbound table not foundhi Steve,
check with transaction we20, if your bw myself source system exist under 'partner type ls' (ls = logical system).
it should exist with
outbound parameter
message type-RSRQST
inbound parameter
message type-RSINFO RSSEND
check also for r/3 source system
you may ask basis for help. -
Error when creating source system
Hi,
Could someone help me to solve this issue :When I want to create a source system D99100 in BI , I get the following message:
the test and remore connection via sm59 in BI are OK.
Source system cannot use any of the proposed connection names
Message no. RSAR362
Diagnosis
Every connection to a source system is named using a unique two-digit identifier. Source system D99100 does not accept any of the proposed values.
The last proposed value was B9.
System Response
Source system has not been connected.
Procedure
If you want to recreate the source system from BI information, then you can only use a single value, namely B9, because the connection already has this name in BI.
Delete the existing connections in the source system or contact a BI consultant.Hello,
By this time your issue might be resolved.
When you are trying to Connect or Reactivate source systems you might get this error. In the source system (R/3) check the table entries RSBASIDOC. Some reason after system copy, these entries should correct if you run BDLS and some time it mess up.
Go the table and go to the edit mode and change the entrie for that RFC destination. Change the filed TSPREFIX to some thing else and save it. Go back to BW and try to reconnect and you will be able to connect it.
Hope this helps in the future for this thread.
PREDDY.
Maybe you are looking for
-
How do I sync comcast email with the mail program on my iPhone and iMac
I have two email accounts set up on my iPhone. One is my gmail account which I use for work. The other is the comcast email, my default home email address. The comcast account doesn't sync iPhone, web mail, or the mail program on my iMac at home. My
-
PI 7.1 can not deploy! ask for user SID adm and password
hi all: PI 7.1, NWDS 7.1 I create a ejb project amd import a WSDL and generate java bean skeleton. after implementation, I choose the EAR project and right click and choose run RUN AS-->Run on server, then choose the server, add project and
-
I get an error message when trying to add new contacts and it is suggested I try back later, also when sending an e-mail the address I wish to send an e-mail to will no longer auto-fill. This has been a problem for sometime, maybe a month. The last p
-
How to check the customer class using CRM_PRICING_BADI...
Hello Experts, I am using the said BADI in transaction CRMD_ORDER to check the customer class and condition exclusion. What data do I need to use and pass? Sorry since I am fairly new to CRM module.Hope you can help me guys.Thank you and take care!
-
BO XI R2 - Java SDK - IRightID.getCategory
Post Author: Gerrit W. CA Forum: JAVA The documentation says that the method IRightID.getCategory returns a localized category of this right. What is meant by category, especially if it is a folder right?