Error in assigning the system message
Hi ,
I am trying to assign a std message no from the std message class in the table V_160M.
Appl are: IW
Message no :187
system is giving an error " please specify a legal value"
Msg number : CZ125
Is it possible to assign any std system message in the message control table?
DP
DP,
You can use this table only for certain message numbers defined by SAP,You cannot use this for any other message numbers.
Regards
Narasimhan
Similar Messages
-
Error in assigning the tax group (FB50)
Hi ,
I was trying to post a FB50 document and got the following error:
Error in assigning the tax group
Message no. FF716
Diagnosis
To guarantee a connection between the automatically created tax items, the initiating line items, and the tax information used for reporting, a unique code is assigned to the line items belonging together. An error occurred during this assignment.
Procedure
Contact your system administrator.
Procedure for System Administration
Create an OSS message.
Please let me know if anyone has encountered this error and what is the resolution for this
Best Regards,
VHello,
Refer SAP Note 207235 - FF716 and FF747 for postings with tax jurisdiction code
Regards,
Ravi -
Error in assigning the tax group
Dear all,
i am facing problem KO88 FOR AUC SELTMENT error is "Error in assigning the tax group"
Error in assigning the tax group
Message no. FF716
Diagnosis
To guarantee a connection between the automatically created tax items, the initiating line items, and the tax information used for reporting, a unique code is assigned to the line items belonging together. An error occurred during this assignment.
Procedure
Contact your system administrator.
Procedure for System Administration
Create an OSS message
Please guide me how to sole the problem
regards
RajDear:
Please apply OSS note 1292730 . In some instances it happens so that a tax procedure is assigned to company (Check in OY01) that does not use jurisdiction code but you have maintained settings in OBCL you have maintained settings for tax jurisdiction code for the co code. This mismatch may result in this error. Please check and revert back.
Regards -
hi,
am running the below command for moving sql serevr mdf and ldf files from one drive to another : c drive to d drive:
but am getting the below error
SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\abc.mdf". Operating system error 2: "2(The system cannot find the file specified.)".
use master
DECLARE @DBName nvarchar(50)
SET @DBName = 'CMP_143'
DECLARE @RC int
EXEC @RC = sp_detach_db @DBName
DECLARE @NewPath nvarchar(1000)
--SET @NewPath = 'E:\Data\Microsoft SQL Server\Data\';
SET @NewPath = 'D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\';
DECLARE @OldPath nvarchar(1000)
SET @OldPath = 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\';
DECLARE @DBFileName nvarchar(100)
SET @DBFileName = @DBName + '.mdf';
DECLARE @LogFileName nvarchar(100)
SET @LogFileName = @DBName + '_log.ldf';
DECLARE @SRCData nvarchar(1000)
SET @SRCData = @OldPath + @DBFileName;
DECLARE @SRCLog nvarchar(1000)
SET @SRCLog = @OldPath + @LogFileName;
DECLARE @DESTData nvarchar(1000)
SET @DESTData = @NewPath + @DBFileName;
DECLARE @DESTLog nvarchar(1000)
SET @DESTLog = @NewPath + @LogFileName;
DECLARE @FILEPATH nvarchar(1000);
DECLARE @LOGPATH nvarchar(1000);
SET @FILEPATH = N'xcopy /Y "' + @SRCData + N'" "' + @NewPath + '"';
SET @LOGPATH = N'xcopy /Y "' + @SRCLog + N'" "' + @NewPath + '"';
exec xp_cmdshell @FILEPATH;
exec xp_cmdshell @LOGPATH;
EXEC @RC = sp_attach_db @DBName, @DESTData, @DESTLog
go
can anyone pls help how to set the db offline. currently i stopped the sql server services from services.msc and started the sql server agent.
should i stop both services for moving from one drive to another?
note: I tried teh below solution but this didint work:
ALTER DATABASE <DBName> SET OFFLINE WITH ROLLBACK IMMEDIATE
Update:
now am getting the message :
Msg 15010, Level 16, State 1, Procedure sp_detach_db, Line 40
The database 'CMP_143' does not exist. Supply a valid database name. To see available databases, use sys.databases.
(3 row(s) affected)
(3 row(s) affected)
Msg 5120, Level 16, State 101, Line 1
Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\CMP_143.mdf". Operating system error 2: "2(The system cannot find the file specified.)".First you should have checked the database mdf/ldf name and location by using the command
Use CMP_143
Go
Sp_helpfile
Looks like your database CMP_143 was successfully detached but mdf/ldf location or name was different that is why it did not get copied to target location.
Database is already detached that’s why db offline failed
Msg 15010, Level 16, State 1, Procedure sp_detach_db, Line 40
The database 'CMP_143' does not exist. Supply a valid database name. To see available databases, use sys.databases.
EXEC @RC = sp_attach_db @DBName, @DESTData, @DESTLog
Attached step is failing as there is no mdf file
Msg 5120, Level 16, State 101, Line 1
Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\CMP_143.mdf". Operating system error 2: "2(The system cannot find the file specified.)"
Solution:
Search for the physical files(mdf/ldf) in the OS and copy to target location and the re-run sp_attach_db with right location and name of mdf/ldf. -
Following error i am getting after i chnaged the Path in Config File from
\\vs01\d$\\Deployment\Files\temp.txt
to
C:\Deployment\Files\temp.txt
[Bulk Insert Task] Error: An error occurred with the following error message: "Cannot bulk load because the file "C:\Deployment\Files\temp.txt" could not be opened. Operating system error code 3(The system cannot find the path specified.).".I think i know whats going on. The Bulk Insert task runs by executing sql command (bulk insert) internally from the target sql server to load the file. This means that the SQL Server Agent of the target sql server should have permissions on the file you trying to load. This also means that you need to use UNC path instead to specify the file path (if the target server in on different machine)
Also from BOL (see section Usage Considerations - last bullet point)
http://msdn.microsoft.com/en-us/library/ms141239.aspx
* Only members of the sysadmin fixed server role can run a package that contains a Bulk Insert task.
Make sure you take care of this as well.
HTH
~Mukti
Mukti -
Running Windows Server 2012 Essentials with an external usb 3 drive as a backup device. Using a Vantec hx enclosure with a WD Red drive. Last night the Dashboard saw the drive with about half the 4TB available for backup. A.M., I get "error code:
2147942403 The system cannot find the path specified".
Going to the server desktop, I see a message indicating that the usb device malfunctioned. unplugging it, and plugging it back in, I now have it available via the dashboard.
This has happened a couple times with two different drives in Vantec hx enclosures.
A couple possibilities come to mind:
the enclosures may both be bad...
there is some problem with the system software and external usb drive.
Thoughts?
Suggestions for external enclosures?
Thanks!Hi,
According to your description, my understanding is that you cannot backup the Windows Server Essentials 2012 and got "error code: 2147942403 The system cannot find the path specified". You found the usb device malfunctioned.
Can you backup the server when you unplugged the usb device, and plugged it back in? If you can backup the server when you replug the usb device, you need to engage the vendor to resolve the hard drive issues.
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Error in assigning the tax group during j1iex
hi
can any one help me....
while posting J1IEX
i am getting this error mesage
"error in assigning the tax group" message ff 716
regard
ashwanihi ravi
thanks for reply. it was very helpfull, i have awarded u with points.
my problem got solved.
thanks
ashwani -
Error in assigning the tax group in SRM-IMS
Hi All,
I am getting an error "Error in assigning the tax group" and when checking thru BBP_PD, message number BBP_PD, 047.
When posting a non PO based invoices from IMS this error is appearing however when I am creating same invoice from XML and posting it in IMS, I am not getting any error and able to post it successfully.
When posting the invoince thru FB60 with same set of data like company code, tax code etc, no errors!!!
Please let me know if anyone has faced similar issue?
Regards,
GopeshDear:
Please apply OSS note 1292730 . In some instances it happens so that a tax procedure is assigned to company (Check in OY01) that does not use jurisdiction code but you have maintained settings in OBCL you have maintained settings for tax jurisdiction code for the co code. This mismatch may result in this error. Please check and revert back.
Regards -
Hi-
I am trying to activate Data Source 0FI_AP_50, however, I noticed on the BW side when I tried to pull in data nothing would come back. I stated tracing backwards and looked at Extraction via RSA3 in source system. At that time I received the error: "Errors occurred during the extraction" Message no. RJ012. The data source is active and data is available in the corresponding tables.
Any suggestions?
Thanks,
MarkHi Mark,
Unfortunately I do not have SAP_ALL in my system for me. But as far as I remember you should follow below path:
Goto Tcode SFW5:
Expand second node - scroll down and choose ENTERPRISE_BUSINESS_FUNCTIONS - FIN_REP_SIMPL_1 - Reporting Financials - check it and Activate changes
Then you might have to relogin again.
One more important thing: try this in Development System only first. Also really important to contact your FI team for impact analysis.
As far as I know these business functions are not possible to revert back
Thanks
Amit -
Errors occurred during the extraction, Message nos. RJ012 & R3009
Hi All,
I am trying to view the data for one of the custom generated Extractors - 3FI_GL_0L_TT using T-code RSA3. But when I try to execute to see the data, i get an error message "Errors occurred during the extraction, Message no. RJ012". I check the log, and in the log, the message is as below:
The extraction program does not support object 3FI_GL_0L_TT
Message no. R3009
Diagnosis
The application program for the extraction of data was called up using the invalid InfoSource/invalid InfoObject 3FI_GL_0L_TT.
System Response
The data extraction is terminated.
Procedure
Check the SAP Support Portal for the appropriate Notes and create a customer message if necessary.
I found many posts in SDN but none of them helped. Infact I found a note - 1069507, which provided a correction for exactly the same error but Basis informed me that the note is not applicable as it is given for only "bank-alyze" component & we don't have this component in our systems.
Did anyone have the same issue with the custom generated datasource in FI-GL for Totals table? Please advice.
ThanksHi,
I got the same error and we have cross client environment but in both environments i got the same error. So tcode SCC1 will not solve my problem and i have to take another way to solve it.
Debugging the datasource, i found out where the error came from: FM SMOX3_DSOURCE_DETAIL, consulting the table: smoxhead_s.
I will let u know if i get some news.
Regards -
" CMN3101E" error...The system is unavailable due to "CMN1039E".
the exact error message that is coming up is " CMN3101E" error...The system is unavailable due to "CMN1039E". This is on both IE 9,10,11 and all versions of Mozilla Firefox. This error comes up when trying to either sign on to a website
or set up an account with different services; home depot; identitiy guard..several others also? any help would be great!Hi,
Please try to describe more regarding this issue as when you will appear this issue and for this sentence. “This error comes up when trying to either sign on to a website or set up an account with different services; home depot; identitiy guard..several
others also?”
Which websites you are trying to sign on? For which account setup you are trying to reflect?
If you are trying to open any sites and facing error then I can suggest you to clear all cache and temporary file of internet and check the result.
Hope it helps!
Thanks. -
I have error while testing the system created from a sap business objects template in SAP portal
I have error while testing the system created from a sap business objects template in SAP portal. Error text:
com.sapportals.connector.connection.ConnectionFailedException: Connection Failed: A nested exception occurred. Could not initialize physical connection. Connection Failed: A nested exception occurred. Could not initialize physical connection. Connection Failed: A nested exception occurred. Could not create JCO connection. 'mshost' missing
I configure integration SAP portal and SAP BW system. All system requirements are complied.
Environment
SAP Business Objects 4.0
SAP BW 7.31
1. I configure SSSO between SAP BW and SAP Business Objects Enterprise 4.0
2. Next I setting integration SAP PORTAL with SAP BW system
3. I download certificate from portal. Select Certificates and key (http://sapserver:port/nwa) – See scren_
4. In next window selected Ticketkeystore and Saplogonticketpair-cert( near part window form)
5. Select Export entry button and binary format file certificate for download. Press download.
6. Save certificate file in local PC folder
In next step need export certificate file to SAP system. Sequence of step:
1. Run STRUSTSS02 transaction .
2. Chose certificate ->import.
3. Select downloaded certificate file
4. Select Add to certificate list button and Add to ACL button
5. Inter System ID and Client(000)
6. In next I download iview sap business objects template into sap portal: System administration->transport->Import. And select and download sap business Objects iview template in .epa format into sap portal.
7. Result – downloaded iview.
8. In next step I create system from template. System administration->system landscape.
9. In next step I input parameters for my system in Connector category, Sap business objects and user management categories: See screen _2
10. When I created the system and test the connection error occurred: See screen_3
This issue is important enough. I would be grateful for opinions and ideas. Thanks in advance.Did you find a solution?
-
I am looking at an issue with users not getting specific group policies.
After searching a number of client computers I found that the following error
The user '*' preference item in the 'User - 6th Form Students Policy {E03166E7-A848-48B5-AA93-97B848AA9C13}' Group Policy object did not apply because it failed with error code '0x80070003 The system cannot find the path specified.' This error was suppressed.
I can find the folder in the Sysvol folder on all of the domain controllers.
The issue with end users seems to be that the proxy settings for internet explorer is not being applied.
Potential problems?
one folder in sysvol entry is empty
\\<server>\SYSVOL\<domain.name>\Policies\{E03166E7-A848-48B5-AA93-97B848AA9C13}\User\microsoft\IEAK\LOCK
or is this our issue
The old method of configuring proxy settings to Internet Explorer 9 has changed?
https://support2.microsoft.com/kb/2530309?wa=wsignin1.0
http://thommck.wordpress.com/2013/11/08/the-new-way-to-configure-internet-explorer-proxy-settings-with-group-policy/Hi all
In administering this policy I am a little confused.
We have a policy that distributes proxy settings in the internet explorer maintenance settings section - however when opening this policy up in GPO editor the internet explorer maintenance section is not present.
I plan to apply the settings via User/preferences/control panel settings/ internet settings (or registry settings from article) however I am unable to edit the settings for internet explorer maintenance and these will persist. Ideas???? -
When I upgraded to the latest Firefox on my Windows 7 PC , I get a 7-Zip Error Box stating " The System cannot find the file specified". This happens approximately two thirds into the installation. I have tried turning the Virus checker off and re-installing, but to no avail.
Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test.
*http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/
Try this:
*Download the full Firefox installer and save the file to the desktop<br>https://www.mozilla.org/en-US/firefox/all/
*Start the installation with a double-click on the desktop icon
Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
*AdwCleaner:<br>http://www.bleepingcomputer.com/download/adwcleaner/<br>http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware:<br>http://www.superantispyware.com/
*Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender:<br>http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller:<br>http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
*https://support.mozilla.org/kb/troubleshoot-firefox-issues-caused-malware -
I created an AIR application in Adobe Flash CS6, but when I test, debug or publish it, an error always occured.
CreateWinProcess failed with error 2. The system cannot find the file specified.
When I clicked OK, Flash suddenly stops responding, so I need to end the process using Task Manager.
I created a blank FLA document and tested and published it, everything's fine there. It was exported properly. But when I do it with the AIR app, Flash can't even start exporting the SWF of the AIP app, and instead gave me the error.
I speculate that there is something wrong with the Java command line stuff Flash is doing behind the curtain. I tried using ADL myself and get the AIR app working fine.
I also found out that Flash has its own JRE installed, so I don't have to bother the JRE used by my computer.
Is there any way to fix this? Thanks in advance. Have a nice day!I installed the update, but I'm sorry to say that it did not solve the problem
The error is still there as described by Master §ix and Daniel777
CreateWinProcess failed with error 2. The system cannot find the file specified.
It happens when trying to test, debug, or publish air applications (AIR 2.5 – AIR 3.4 , desktop, android, iOS)
In this case, I can't use the simulator to test the applications,
thanks
Maybe you are looking for
-
Attempting to update Iphone. It gave me a picture that looks like it wants me to attatch the phone to the computer with my itunes. Noe itunes is tellime me my phone is in recovery mode and wants me to restore my phone before it can be used with itu
-
I am using Flex with PHP via AMF PHP. Building application was fine. But it gave me problem when I deployed it to server which sits behind SSL layer. The problem is not associate with data accessing I can access data very well but I when I go to any
-
Custom PDF/RTF reports with Cocoon (problem with special characters)
Hi all, I've setup application (APEX 3.0.1) with some custom PDF reports (using Cocoon 2.1.10), I'm generating my own hierarchical xml structure, using query with xmlelement() and xmlagg() functions, I cannot use built-in xml generator, because I nee
-
I use CRM4.0 and ISA is deployed on WAS 640 sp9. I want to integrate ISA with UME. I follow the note 805713 download a patch zip file and deploy it to the WAS. Then I create a new 'Application Configuration' based on 'b2bWithUME'. After that I create
-
ERROR DURING INTEREST CALCULATION -FLINT
Hello I have med all the settings in IMG for Interest calculation When I process Flint i get the below error ..... Account symbol 0001 cannot be replaced (modify. + ) can i know what causes this error ...i have maintained settings in OBV1 As below :