Error in Audit object link to Oppurtunity (Audit Management)

Hi,
I'm using audit type for oppurtunity check. On pressing F4 help to
select available oppurtunities i get the following error message
"No values found"
However, I found that there are entries for oppurtunities (BO Type :
BUS200111) in table CRMD_ORDERADM_H.
I have created Audit object attribute type Y1 following the
configuration guide "D80: Client & Project Acquisition " from SAP Help
portal.
Regards
Prathiba

Hi Gregor,
Thanks for your reply.
using windows explorer mechanism i can see the folders that i created in the CRM config.
Now in Portals KM i did the following steps:
a) Created an HTTP Data Source : with URL = the URL that the service crm_prt_km_dav generates.
http://abrusux156h.pch.chem.corp.local:8086/sap/crm/crm_prt_km_dav
b)Created a memory cache
c)Created a WebDAV respository manager with the following details:
Description :WebDAV
Prefix : /PRD (PRD is the BO Hierarchy name that i have set in the CRM config)
System ID : T86 (Sames as what was set in HTTP Data Source)
Repository Service : svc_acl
ACL Manager cache : ca_cm
Security manager : ACLSecurityManager
Memory Cache :webDAV(same as what i had set in step b)
I restarted the portal server. and then tried doing the test by going to
Content Admin ->KM Content ->root
But i dont see the /PRD folder out there.
Any clues on that???
Thanks,
Anand

Similar Messages

Error when attaching object link in DMS

Hi Experts,
I am calling the function module CV110_DOC_CREATE in my program. This program i have attached to a ztransaction.Thus the screen after entering the document type, document version and part in the cv01n transaction appears when my ztransaction is executed. But the problem is that i can attach object link (document info record) when the ztransaction is executed initially. But when i click on back button and again comes to the screen i am not able to attach the object link.Then it gives an error as " Object does not exist". Please help.

When the back button is clicked screen for my ztransaction comes.From there it is calling the actual screen to attach the object link.there i am trying to attach the object link again...then it is saying as object does not exists. This same dir i have attached earlier as object link when the ztransaction was run initially.

New object link in dms (audit)

Hello,
i have to open new object link for AUDIT for DMS.
any information ?
thanks,
avi.

Hi Avi,
Define the Object link types for the object links which you want to maintain. Please check whether the Audit type is available in the Object link types or not.
Regards,
Nishit Jani

Audit Management-Audit Objects

Dear Experts,
i want to know how we can assign Audit Objects to an Audit Type.
for example i have created an Audit Type Internal audit. now i want to assign audit object to it. Can i add department in it instead of Vendor/Customer etc.
Regards
Kashif

Hi,
1. Audit plan to Audit
You can't assign Audit plan to Audit. Reverse is possible.
Assigning Audit to Audit Plan is possible - Right click on any Audit plan and choose 'Create -> Audit using template' for already existing audit components.
To assign new audit component, choose Create -> Audit'
2. Audit to Question list
You can't assign Audit to Question list.
Assigning Question list to Audit is possible - Right click on Audit component and choose ' Create -> Assign Question list'.
*You can not assign any question list without releasing it.
Once the Audit has been released you can not assign a question list.*
3. Audit to audit question list
Right click on Audit and choose 'Create -> Audit Question list/ question using template'.
4. Question list to Audit plan
You can't assign Question list to Audit Plan.
4. Question to corrective/preventive action
You can't assign question to CAPA.
You can assign CAPA to question - Right click on Question and choose 'Create -> Corrective/ Preventive action' OR 'Corrective/ Preventive using template'.
SAP audit management Please have a look at this link for detailed functionality.
http://help.sap.com/saphelp_crm40/helpdata/EN/2a/ea273aeaa07123e10000000a114084/content.htm
Regards,
Ram

Display an error message in Portal during creation of Object Link

Hi,
I have a requirement where I need to throw an error message in Portal during creation of Object Link.
The requirement is whenever the user clicks on Item and try to create a Object Link for Material-Plant combination, if the Mat-Plant combination exist, than I have to throw/display an error message.
I tried for some enhancements in BAPI_BUS2172 but it does not work out.
Please help.
Thanks in advance.
Arbind

Hi,
If you include the UI, it will display at the top of the screen..
Please see below how to create a message in the message editor.
http://help.sap.com/saphelp_nw04/helpdata/en/72/1d6526263ff24995016a152705eab2/frameset.htm
and this is how you access the error message in the application ti display it to the end user
http://help.sap.com/saphelp_nw04/helpdata/en/72/1d6526263ff24995016a152705eab2/frameset.htm
Regards,
Ganesh N

DMS:Object link to Purchase requesition item giving error

Dear All,
I have a requirement to attach documents in Purchase requesition item, but if i try to attach the object link in DIR from CV01N, it gives ma an error "The status RL cannot be set because no objects exist to the following links"Purchase req. item 001000399200000
But if attach a document from me51 it is attached & also can be seen from CV02N.
I have maintained the object link 'EBAN' & screen no 247 to my document type.
So where should be the problem.
Help will be Appreciated.

Thanks rehman,
i have tried the 'object check' tick removing process it works but when ever i select a purchase requestion as a object link in my DIR, it only selects the purchase req. number but the item no is not selected, if i don't put the item no manually the DIR is saved with the objectlink but if u go & see in the purchase req. transaction there is no document attached to it.
When u select a purchase req. number & put the item number manually in DIR, then the document is attached in the PUR .REQ.
What would be the reason that the Pur. Req. & item no both donot appear when i select them in my DIR object link tab.
And i had four status for my Document type all had the problem of objet check, so i have removed that tick.
Regards
Nishant....

Attachment error: Object Link type   in UWL

Hi,
This is regarding the UWL - opening the attachment.
we have integrated the solution manger to the Enterprise portal where
the workflow tasks of the solution manager will be displayed in the UWL
of the Enterprise portal.
The workitems are displayed properly, but when we try to see the actual
work item attachment it is giving error as follows:
"Attachment error: Object Link type . See log file for details "
The detailed error we have taken from the UWL.log, which displays as
follows:
" Mon Mar 12 20:45:42 GMT+05:30
2007:com.sap.netweaver.bc.uwl.core.connect.webflow.util.ObjectLinkException: Mon Mar 12 20:45:42 GMT+05:30 2007 CRM Context service has not
been installed "
The URL which goes like this:
http://ep6devn:50000/irj/servlet/prt/portal/prtroot/com.sap.netweaver.bc.uwl.ui.UWLInformation?key1=AttachmentError&key1_param1= Object Link type .
Similarly if we try to open the same attachment in solution manager by
logging at SAP-GUI frontend i.e. through Tcode:SBWP and selecting the
workitem, choosing the objects and attachments. it is displaying the
actual message.
Enterprise portal current status: EP 6.0 NW2004-SP16
Solution manager status: SOlution manager 4.0 NW2004s-SP8
Help me in solving this.
Thanks and Regards
Yaswanth kumar P

Hi Yeshwanth,
      Can u please share the document how to configure Solution Manager with UWL of portal.
      Please share the document as u can.
Regards,
kishore.

FDM: Error retrieving audit intersection cell information

Hi,
Could anyone please tell me how to resolve an error we've been having?
When I right click in a cell in HFM with a view to using the Audit Intersection menu pick to review data uploaded using FDM, I see the error message "Error retrieving audit intersection cell information". Strangly, this works fine in our PPD environment, but we can't seem to get it working in Live even though the Drill-Back set up was copied across from PPD (with references to PPD changed to Live obviously)
Thanks in advance
Phil

Which Version of HFM are you on? I know that in 9.3.1 Classic, you must update the metadata between migrations to the specific application name of FDM, if you have the same FDM app name, this would not apply, but if they change, you will need to change the metadata between them. The FDM app name is defined in the Application Settings dimension of metadata.
JTF

Error message when searching for an object link within EasyDMS

Hello,
I have a problem with the easydms system. Everything works fine except searching in the object links. When I want to define an object link and I don't know the name of the object I try to find it with the help of the search function within easydms (within the object links).
But the search always delivers an error message:
"Missing authorization check to display master data"
Does anybody now what to do?
Thank you for your help.
Best regards,
Markus Sigl

Hi Markus,
When you try to do this the BAPI 'BAPI_HELPVALUES_GET' is used. There are some authorization checks that are being performed for the object. These authorizations are maintained in the table BAPIF4T.
For the above said test data, you are trying to get the help values for
the relevant field (e.g. EBELN: po_number).However,in table BAPIF4T the corresponding authorization for the data element ebeln is not maintained. And so you are getting this error.
So, when you maintain the below record in the table BAPIF4T,you will
have the corresponding authorization and you will not get the error
anymore.
sample entry:
Object type - ' '
Object type component - ' '
BAPIF4T-DTEL - 'EBELN'
BAPIF4T-FNAM - 'PLM_HELPVALUES_AUTHCHECK'
Best regards,
Christoph

Attachment error: Object Link type

Hi,
This is regarding the UWL - opening the attachment.
we have integrated the solution manger to the Enterprise portal where
the workflow tasks of the solution manager will be displayed in the UWL
of the Enterprise portal.
The workitems are displayed properly, but when we try to see the actual
work item attachment it is giving error as follows:
"Attachment error: Object Link type . See log file for details "
The detailed error we have taken from the UWL.log, which displays as
follows:
" Mon Mar 12 20:45:42 GMT+05:30
2007:com.sap.netweaver.bc.uwl.core.connect.webflow.util.ObjectLinkException: Mon Mar 12 20:45:42 GMT+05:30 2007 CRM Context service has not
been installed "
The URL which goes like this:
http://ep6devn:50000/irj/servlet/prt/portal/prtroot/com.sap.netweaver.bc.uwl.ui.UWLInformation?key1=AttachmentError&key1_param1= Object Link type .
Similarly if we try to open the same attachment in solution manager by
logging at SAP-GUI frontend i.e. through Tcode:SBWP and selecting the
workitem, choosing the objects and attachments. it is displaying the
actual message.
Enterprise portal current status: EP 6.0 NW2004-SP16
Solution manager status: SOlution manager 4.0 NW2004s-SP8
Help me in solving this.
Thanks and Regards
Yaswanth kumar P

It seems to be some Basis Issue. May be something from Basis or security side needs to be done. We had experienced such issues previously. The basis team can resolve this.
<b>Please reward Points if useful</b>
Thanks
Arghadip

Excel 2013 "cannot use object linking and embedding error"

Hi
We are using excel export as pdf functionality and have the following DCOM configuration
1.start->run and type 'DCOMCNFG'
2: Open 'DCOM Config' and locate 'Microsoft Excel Application'
3: Set its identity to 'This User' and give specific service user
On opening excel we are getting "cannot use object linking and embedding error" and the microsoft sugestions tells to change to launching user which is not an option for us,Is there any other suggestion to fix this issue by keeping Dcom
configuration with'This User'
Thanks in advance
Pradeep

Hi
when excel is opened, a warning pops up saying "Cannot use object linking and embedding" . This
fix change the DCOM ID to Launching User) does not work for us. We need the Excel DCOM ID to use a particular user "domain\user" in order to access excel from our website.
Is there any other suggestions
Thanks in advance
Pradeep

PDF from Keynote_Exit Slide object link error

When I export Keynote presentation to PDF all the object hyperlinks work fine (Forward / Back / Specific Slide No) but the 'Exit Slideshow' object doesn't even though it appears as a hyperlink. Any thoughts much appreciated. Thanks very much.
Mazinsky

Hi Jay,
Independent of the 'Object check' flag within document management
system customising, the object links can be broadly categorised into
two types
1. Links that can be created without their existence previously
Ex: material master, equipment, customer, vendor etc.
This means that even thought a material XYZ does not exists in R/3 there
is a possibility to link it to a document, and create the material at
any later point of time.
2. Links that are mandatorily to be present before linking them with
the document. Ex: WBS element, Sales order item, document info record,
asset master etc
This means that R/3 system expects the links to be existing before they
are linked to any document.
The above explaination goes irrespective of the customising setting.
The system is designed to reject NON-existing entries of WBS elements,
sales order etc, when user tries to link them.
I hope this information is usefull for you. If it is, please reward points.
Best regards,
Christoph

Object Link Error.

Dear All,
We are facing an issue regarding object link of document we maintained one object link (Standard One) we are testing in two different languages. I can able to see the link in Language English same time i am unable to see the same link in other language. Please post your valuable queries in this regard.
Regards,
Bhanu.

Hi Bhanu,
In SPRO ..in "Document type" config you have to define the object link with description in both languages which you want.
When you login in SAP with different language you will be able to see the object link with that lnaguage only which you have maintained in config.
Thanks
Pravin

Best practice for audit management

Hi,
Is there any best practice for audit management in SAP ?

Hi,
You can check these links and white papers which explains the business scenarios and best practices
http://www50.sap.com/businessmaps/9AD1FC0540D0479CA76C4CA1EE9AF668.htm
http://www.sap.com/solutions/business-suite/erp/brochures/index.epx - "Audit management with SAP software".
Regards,
Keerthi

New Text Field To Be Added in Audit Management

Hi All,
I need to create new text fields in addition to the existing fields in Audit Management screen for all the audit components in the TEXT TAB in transaction PLMD_AUDIT.
I would like to know is it possible or not and if not possible then what is the alternate way to include more inofrmation.
Will be rewarded...
Regards,
Ram.

Hi Ram,
New text field can be added in the texts tab of plmd_audit transaction is achieved by ,
1) The following entries has to be maintained in the view V_TTXIDI Object, Id, Meaning.
Object-select cgpl_text
Id : you need to define(this id you will refer in the initial value of the attribute in the BADI-name of your text field).
Meaning : short description of your BADI.
save your entries & activate it.
2) Implement this BADI "PLM_AUDIT_TEXT_ID"
within the method "GET_TEXT_IDS" we need add our code for adding the new text fields.Within this method the code for standard text fields would be existing.
3) In the attributes tab of the ZCL_DEF_IM_PLM_AUDIT_TEXT_ID -class interface ,you need to pass the initial value,which has been defined in the view "V_TTXIDI".
4) Finally activate your BADI.The newly added text fields would be available in the PLMD_AUDIT tcode.
Hope this solves your requirement.
Regards,
Keerthi

Error in Audit object link to Oppurtunity (Audit Management)

Similar Messages

Maybe you are looking for