Error in background job.
Hello Seniors,
I am a MM consultant. I tried to create source list automatically in back ground in ME05 and it gave a program name RM06W003. When i check in SM37 it was active for sometime and again if i check after sometime its status was cancelled. Why is it so ? I have checked the job log, it is having so many spool request number and telling spool request created without immediate output.
Kindly clear me. This is the first time i am doing back ground job. Where i am making mistake.
Regards,
JanaMM
Hi ,
I gues there mite b some problem with ur printer Configuration
by the job log ur getting Error spool request created without immediate output.
u can fix the problem by making changes in Tcode Spad.
Otherwise refer notes:this may help u...
SAP Note 843722 - RAPOST2000: Misleading message texts in the job log
Note 753211 - AR29N: Error in file, SCMO status and message handling
Thanks
Ramakrishna.
Similar Messages
-
Error in background job for program RSGET_SMSY error message No active job
Hello!
I would like to set up the Change Request Management functionality in SAP Solution Manager.
The only red warning by executing Test-button in Tcode SOLAR_ADMIN_PROJECT is:
<b>Error in background job for program RSGET_SMSY error message No active job found</b>
Can someone please tell me how to solve this problem?
(tcodes, technical steps)
Thank you very much!
regards
ThomThank you very much!
Can you also help me with the warning "Errors occurred during synchronization of the system landscape" in tcode SOLAR_PROJECT_ADMIN" --> System landscape --> Change requests --> "Refresh"?
The second issue I cannot see any projects in Tcode "/TMWFLOW/CMSCONF"
according to the SPRO-step "Set Project Assignment of Requests as Mandatory"
Thank you!
regards -
Error in background job for VT04 - RV56TRGN
Hello!
The selection criteria is fine - we want every shipping point to be used to create every variant. We also have TPPs mirroring the plant codes. The job log sepects some deliveries which are good and tries to process them - the endlogue is it found X no. of deliveries, processed them but did not write the shipment to the data base. Digging further, it shows the error - <u>the system cound not determine the TPP for the plant in the delivery line item.</u>
When I look at the variant, it doesn't talk of the TPP at all - only the shipping point and all the other criteria mainly associated with the deliveries and their statuses. I am wondering how the system knows which TPP to use for each shipping point when no TPP is assiged in the variant? Is this a default configuration I am missing? Or something else? Appreciate any leads...
Thanks a lot.PS: In addition to creating the shipments, we also need to make their status to 'complete' in the background job as it is a purely non value added activity for us but we need the shipments for the cost documents. Any ideas how I can go about that?
Thanks. -
Error in Background Job Processing.
Dear All,
I am using a background job for processing the outbound delivery.
In the user exit in delivery program I am checking for the combination of
ship to party, Material & Batch of outbound delivery in a ztable. If the combination exists in
Ztable I do not want to save & ignore this delivery creation and continue with the next
delivery order creation thru the batch job.
However I need to give an error / warning message for the delivery orders
which are not created so I am giving the error message as success message
in the below format :-
IF L_RETURN-TYPE = 'E'.
MESSAGE S000(Z64_I) WITH L_RETURN-MESSAGE_V1
L_RETURN-MESSAGE_V2
L_RETURN-MESSAGE_V3
L_RETURN-MESSAGE_V4
DISPLAY LIKE 'E'.
PERFORM FOLGE_GLEICHSETZEN(SAPLV00F).
FCODE = 'ENT1'.
SET SCREEN SYST-DYNNR.
LEAVE SCREEN.
ENDIF.
But my job is finished as soon as the above message is encountered and the
rest of the outbound deliveries are not created.
However if I execute the progarm in foreground the execution is working fine.
Could you please let me know what do I need to code / do corrections to make
the program run successfully in background.
Thanks & Regards
Jitendra GujarathiHello,
Check system log and also check work process trace, to know the error.
I feel that it could be Authorization issue, you don't have sufficient authorization to do.
Hope this helps.
Regards
venkata
Edited by: venkata emandi on Sep 12, 2011 8:13 AM -
Spool error for background job
Hi All,
I have scheduled one job in sap for a report.I have made a distribution list via tcode SO01.
I have given this distribution list to the SPOOL RECEPIENT section in SM 36.
The job is running successfully but is giving the following error and not sending emails to the distribution list.
The error is :-
"Spool list of step 1 could not be sent due to error 7".
Does anybody has any idea about this error?
Please help its a production issue.
Thanks in advance
Vivekanand MeghmalaLook at SAP note : 760838
Symptom
Background job spool lists are not sent.
Other terms
RSBTCRTE, RSPO_SPOOLJOB_TO_OFFICE, SO_DOCUMENT_SEND_API1
Reason and Prerequisites
1. The jobs in question have recipient references in table TBTCO but these have no equivalent in the Business Object Repository.
2. An error occurs when sending in the spool or in the Sapconnect layer.
Solution
This note does not provide a direct solution to the problem but it does provide a source code enhancement that you can use to create more trace information about the cause of the error. When you copy and execute a job with spool list recipients, trace messages are output when errors occur.
After implementing the correction instructions, use transaction SE91 to create the following message:
Message class: BT
Number: 347
Text: Spool list of step &1 could not be sent due to error &2.
In detail, the error numbers mean:
1 = Spool request does not exist (or no longer exists)
2 = Spool request does not contain any data
3 = Empty page area selected
4 = No authorization to send the request
5 = Access to the spool request is not possible
6 = Read error in the Temse layer
7 = Spool request could not be sent (sending problem)
8 = Incorrect request type
9 = Other -
Error in background job scheduling in Solman 7.0
Hi Experts,
I am working with Solman 7.0 configuration. In the IMG node for Scheduling background jobs (Solution manager-> General Settings), while following the documentation to schedule the jobs, I am facing issues with the following jobs:
1. *SEND_SYSTEM_RELATIONSHIP_TO_SUPPORT *
This job got cancelled on immediate scheduling, however has been scheduled for next day. What could be the reason by which it got cancelled?
2. AI_SDK_FILL_FILE_TYPE_TABLE
I cant find a job of this name in the system (while all other jobs are already available in the system by default). But, there is a program with the same name. Should I schedule the same in SM36?
Regards,
Arun.Hi,
Yes schedule a job with program AI_SDK_FILL_FILE_TYPE_TABLE. Hope this solves your problem.
Feel free to revert back.
--Ragu -
Error in background job of downloading data to PC
Hi Gurus,
I hv created a report for downloading data to PC using
GUI_DOWNLOAD FM when scheduling job in background
job is getting canceled...................
give me some solution....thnaks friend.i hv used DATASET as u said...............
But I M getting dump
FILE IS NOT OPEN
this is my code
TYPES:BEGIN OF T_MARD,
MATNR LIKE MARD-MATNR,
WERKS LIKE MARD-WERKS,
LGORT LIKE MARD-LGORT,
LABST LIKE MARD-LABST,
MAKTX LIKE MAKT-MAKTX,
END OF T_MARD.
***********WORK AREAS**********
DATA: WA_MARD TYPE T_MARD,
WA_MARD1 TYPE T_MARD.
DATA:BEGIN OF IT_MARD1 OCCURS 0,
MATNR(18),
WERKS(4),
LGORT(4),
LABST(13),
MAKTX(40),
END OF IT_MARD1.
TYPES : BEGIN OF TY_BAT,
LINE(100) TYPE C,
END OF TY_BAT.
*********INTERNAL TABLES*******
DATA:IT_MARD TYPE STANDARD TABLE OF T_MARD INITIAL SIZE 0 WITH HEADER LINE .
types: BEGIN OF ITAB1,
FIELD(100),
END OF ITAB1.
DATA : IT_BAT TYPE TABLE OF TY_BAT,
WA_BAT TYPE TY_BAT,
wa_itab1 type itab1.
data : it_tab type table of ALSMEX_TABLINE with header line.
*DATA: FILENAME1 TYPE STRING valu.
*DATA: FILENAME1(500).
DATA: FILENAME1 TYPE RLGRAP-FILENAME .
LOOP AT IT_MARD1.
CONCATENATE IT_MARD1-MATNR IT_MARD1-LABST IT_MARD1-MAKTX
INTO wa_ITAB1 SEPARATED BY ' '.
APPEND wa_itab1 to IT_tab.
CLEAR wa_ITAB1.
CLEAR WA_MARD.
ENDLOOP.
CONCATENATE 'D:\STOCKINH\' SY-DATUM '.TXT' INTO FILENAME1.
open dataset filename1 for output in binary mode." ENCODING DEFAULT.
IF sy-subrc = 0.
EXIT.
ENDIF.
LOOP AT it_tab into wa_itab1.
TRANSFER wa_itab1 TO filename1.
CLEAR wa_itab1.
ENDLOOP.
close dataset filename1.
MESSAGE S001(38) WITH 'Files Generated'.
WA_BAT = 'ftp -s:d:\ftp\ftp_upload.txt'.
APPEND WA_BAT TO IT_BAT.
CLEAR FILENAME1.
FILENAME1 = 'D:\STOCKINH\ftp_upload.BAT'.
open dataset filename1 for output in binary mode." ENCODING DEFAULT.
IF sy-subrc = 0.
EXIT.
ENDIF.
LOOP AT it_bat INTO wa_bat.
TRANSFER wa_bat TO filename1.
CLEAR wa_bat.
ENDLOOP.
close dataset filename1.
CLEAR: IT_BAT.
REFRESH IT_BAT.
WA_BAT-LINE = 'open 10.100.103.199'.
APPEND WA_BAT TO IT_BAT.
CLEAR WA_BAT.
WA_BAT-LINE = 'epossync'.
APPEND WA_BAT TO IT_BAT.
CLEAR WA_BAT.
WA_BAT-LINE = 'sync@1234'.
APPEND WA_BAT TO IT_BAT.
CLEAR WA_BAT.
WA_BAT-LINE = 'lcd D:\STOCKINH\20080201.TXT'.
APPEND WA_BAT TO IT_BAT.
CLEAR WA_BAT.
WA_BAT-LINE = 'cd /home/epossync/AMIT'.
APPEND WA_BAT TO IT_BAT.
CLEAR WA_BAT.
WA_BAT-LINE = 'binary'.
APPEND WA_BAT TO IT_BAT.
CLEAR WA_BAT.
WA_BAT-LINE = 'hash'.
APPEND WA_BAT TO IT_BAT.
CLEAR WA_BAT.
WA_BAT-LINE = 'put D:\STOCKINH\20080201.txt'.
APPEND WA_BAT TO IT_BAT.
CLEAR WA_BAT.
WA_BAT-LINE = ' '.
APPEND WA_BAT TO IT_BAT.
CLEAR WA_BAT.
WA_BAT-LINE = 'bye'.
APPEND WA_BAT TO IT_BAT.
CLEAR WA_BAT.
CLEAR FILENAME1.
FILENAME1 = 'D:\STOCKINH\ftp_upload.txt'.
open dataset filename1 for output in binary mode." ENCODING DEFAULT.
IF sy-subrc = 0.
EXIT.
ENDIF.
LOOP AT it_bat INTO wa_bat.
TRANSFER wa_bat TO filename1.
CLEAR wa_bat.
ENDLOOP.
close dataset filename1. -
COM routine error in Background job.
Hello All,
During background process of a job, we found a "Error for COM routine using application program (return code 40.301)" for a CVC. It caused a backgroung job to fail.
Could you please throw light, why this error comes only for this CVC ( as had the same instance before for the same CVC ) & how to fix it ?
Reagrds
Rahul ChitteHI Rahul,
COM routine errors are generally related to LC errors. There are a number of possible causes for it, the CVC was created when a macro was running or it was deleted from MPOS but not from LC etc etc.,
Solution to this is go /n/sapapo/msdp_admin --> Go to your planning area --> Double Click --> Look for Extras in Menu --> Go to Consistency check and do a time series consistency check.
Remember to click Check for Live Cache Anchor and leave 'Repair' unselected.
This will return what is the error. Once you see the error, you can go back and select the 'Repair' Also and then execute again. This should resolve the problem.
Hope this is helpful.
Thanks
Mani Suresh -
Report giving a error in background job
Hi all ,
I am facing a major issue , I have a normal executable report which when i run in foreground
works fine , but when i go to option in menu bar and choose the option to run the report in background
it , i choose to start the job immediate , then i go to SM37 and execute , i see the job is cancelled .
I checked in ST22 dump is like "OBJECTS_NOT_CHARLIKE" this is in standarad SAP program.
Have anybody faced this kind of issue ?
I dnt think i need to write any code (job_open , close) in my program .
Please provide with useful solutions?Hi Bhanu,,
Here is the solution....
ls_fieldcat-fieldname = 'VERSN1'.
ls_fieldcat-outputlen = '02'.
ls_fieldcat-seltext_l = text-u06.
ls_fieldcat-seltext_m = text-u06.
ls_fieldcat-seltext_s = text-u06.
ls_fieldcat-reptext_ddic = text-u06.
append ls_fieldcat to lt_fieldcat.
clear ls_fieldcat.
ls_fieldcat-fieldname = 'QTY01'.
ls_fieldcat-datatype = 'QUAN'.
ls_fieldcat-outputlen = '13'.
ls_fieldcat-seltext_l = w_wkhdr01.
ls_fieldcat-seltext_m = w_wkhdr01.
ls_fieldcat-seltext_s = w_wkhdr01.
ls_fieldcat-reptext_ddic = w_wkhdr01.
append ls_fieldcat to lt_fieldcat.
clear ls_fieldcat.
use Fieldcat-DATATYPE.
Thanks & Regards,
Dileep .C -
Error in Background Job:CALL_FUNCTION_CONFLICT_TYPE
Hi
We ran one job some 2 or 3 times on the same day but it is getting cancelled now due dump error ABAP/4 processor: CALL_FUNCTION_CONFLICT_TYPE. This dump is coming due to parameter type conflict in the function module JOB_CLOSE.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
not caught in
procedure "SUBMIT_JOB" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The call to the function module "JOB_CLOSE" is incorrect:
The function module interface allows you to specify only
fields of a particular type under "TARGETSERVER".
The field "MYNAME" specified here is a different
field type.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
jobname = jobname
jobcount = jobcount
strtimmed = 'X'.
strtimmed = 'X'
TARGETSYSTEM = SY-HOST.
targetsystem = sy-host
targetserver = myname
EXCEPTIONS "QIZK001068
cant_start_immediate = 1 "QIZK001068
invalid_startdate = 2 "QIZK001068
jobname_missing = 3 "QIZK001068
job_close_failed = 4 "QIZK001068
job_nosteps = 5 "QIZK001068
job_notex = 6 "QIZK001068
lock_failed = 7 "QIZK001068
OTHERS = 8.
DATA myname LIKE msxxlist-name.
Structure MSXXLIST Active
NAME MSNAME2 CHAR 40 0 Application Server Name
Function module JOB_CLOSE Active
TARGETSERVER LIKE BTCTGTSRVR-SRVNSPACE
Structure BTCTGTSRVR Active
SRVNAME BTCSRVNAME CHAR 20 0 Server name
My question is why is this dump coming now after running the same job again, as earlier it got run successfully. Also, do i need to fix this this.
Edited by: deepti Gandham on May 18, 2010 2:54 PMHi Deepti,
Check the data types of the parameters TARGETSERVER & MYNAME. They might be different, and hence the error.
Some one might have changed the types recently. Hence there was no error previously. The error might have come after the change.
kindly correct the data types so that they match. Or else the error would continue to occur.
Thanks,
James -
Error in Background job for Status refresh after SP15
Hi,
I am having a issue after applying SP 15 in our Solman Production.
Bckg Job REFRESH MESSAGE STATUS for refereshing message status which was working fine uptil SP10 now its
giving us following error
At least one entry could not be found in object buffer CRM_ORDER_MISC 106 E
I refered note number 1096329 but it doesnot give the solution as our Solman PRD is already at Support package ST ( SAPKITL425)More over our Solman Dev is working fine with SP15 with same seetings as Solman PRD .
Can anybody help me out. Is there any further setting needs to be done in IMG.
Waiting for the response.
Regards
Atul AnandSAP note 1140822 has to be implemented.
regards
Atul Anand -
Error in background job while running FTP_CONNECT
Dear Friends,
When I try to run the FTP_CONNECT FM in background,
the ftp server is not connected throwing an error message ''Attempt to set up connection to <ftpserver> failed''.
I am using the RFC destination SAPFTPA and still it is not working!
My program was successfully executing in fore ground with SAPFTP.
Please help.
Thanks and Regards,
Vidya Sagar.Hi,
The below program is to create file on FTP server by taking the data from internal table
To see whether the file is created on the FTP server
use the function module FTP_SERVER_TO_R3.
Check the below code.
You write a same program with the function module FTP_SERVER_TO_R3 instead of
FTP_R3_TO_SERVER to check the existence of the file which is already created.
tables: t777a. "Building Addresses
Internal Table for Building table.
data: begin of it_t777a occurs 0,
build like t777a-build, "Building
stext like t777a-stext, "Object Name
cname like t777a-cname, "Address Supplement (c/o)
ort01 like t777a-ort01, "City
pstlz like t777a-pstlz, "Postal Code
regio like t777a-regio, "Region (State, Province, County)
end of it_t777a.
Internal Table for taking all fields of the above table in one line
separated by u2018|u2019(pipe).
data: begin of it_text occurs 0,
text(131),
end of it_text.
Constants: c_key type i value 26101957,
c_dest type rfcdes-rfcdest value 'SAPFTPA'.
data: g_dhdl type i, "Handle
g_dlen type i, "pass word length
g_dpwd(30). "For storing password
Selection Screen Starts
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE TEXT-001.
parameters: p_user(30) default 't777a' obligatory,
p_pwd(30) default 't777a' obligatory,
p_host(64) default 'XXX.XXX.XX.XXX' obligatory.
SELECTION-SCREEN END OF BLOCK blk1.
SELECTION-SCREEN BEGIN OF BLOCK blk2 WITH FRAME TITLE TEXT-002.
parameters: p_file like rlgrap-filename default 't777a_feed.txt'.
SELECTION-SCREEN END OF BLOCK blk2.
Password not visible.
at Selection-screen output.
loop at screen.
if screen-name = 'P_PWD'.
screen-invisible = '1'.
modify screen.
endif.
endloop.
g_dpwd = p_pwd.
Start of selection
start-of-selection.
To fetch the data records from the table T777A.
select build stext cname ort01 pstlz regio
from t777a
into table it_t777a.
Sort the internal table by build.
if not it_t777a[] is initial.
sort it_t777a by build.
endif.
Concatenate all the fields of above internal table records in one line
separated by u2018|u2019(pipe).
loop at it_t777a.
concatenate it_t777a-build it_t777a-stext it_t777a-cname
it_t777a-ort01 it_t777a-pstlz it_t777a-regio
into it_text-text separated by '|'.
append it_text.
clear it_text.
endloop.
To get the length of the password.
g_dlen = strlen( g_dpwd ).
Below Function module is used to Encrypt the Password.
CALL FUNCTION 'HTTP_SCRAMBLE'
EXPORTING
SOURCE = g_dpwd "Actual password
SOURCELEN = g_dlen
KEY = c_key
IMPORTING
DESTINATION = g_dpwd. "Encyrpted Password
*Connects to the FTP Server as specified by user.
Call function 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
text = 'Connecting to FTP Server'.
Below function module is used to connect the FTP Server.
It Accepts only Encrypted Passwords.
This Function module will provide a handle to perform different
operations on the FTP Server via FTP Commands.
call function 'FTP_CONNECT'
EXPORTING
user = p_user
password = g_dpwd
host = p_host
rfc_destination = c_dest
IMPORTING
handle = g_dhdl
EXCEPTIONS
NOT_CONNECTED.
if sy-subrc ne 0.
format color col_negative.
write:/ 'Error in Connection'.
else.
write:/ 'FTP Connection is opened '.
endif.
**Transferring the data from internal table to FTP Server.
CALL FUNCTION 'FTP_R3_TO_SERVER'
EXPORTING
HANDLE = g_dhdl
FNAME = p_file
CHARACTER_MODE = 'X'
TABLES
TEXT = it_text
EXCEPTIONS
TCPIP_ERROR = 1
COMMAND_ERROR = 2
DATA_ERROR = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
write:/ 'File has created on FTP Server'.
ENDIF.
Call function 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
text = 'File has created on FTP Server'.
To Disconnect the FTP Server.
CALL FUNCTION 'FTP_DISCONNECT'
EXPORTING
HANDLE = g_dhdl.
To Disconnect the Destination.
CALL FUNCTION 'RFC_CONNECTION_CLOSE'
EXPORTING
destination = c_dest
EXCEPTIONS
others = 1.
Regards,
Kumar Bandanadham -
Error in Background Jobs After Client Copy
Hi,
We had performed a system refresh from a production client(with client no 300) to a quality server (client no: 200). The post processing steps were performed ok. Later the client 300 on the quality server was dropped. However, the scheduled user jobs in the background on client 200 still refer to the original client 300 and abort.
Is there any way of modifying there jobs(there are lots of them) so that the client(300 in this case) reference is modified to the existing client 200.
Points will be rewarded for good answer.
Thanks and Regards,
SubodhHi
The reason for the jobs getting cancelled could be that they are
client dependent jobs and inoder to resolve the issue, please
reschedule the jobs in client 200 and check whether the job fails.
Please let me know if all the jobs are failing or the issue is only
with the client dependent jobs.
Hope this information helps. Please get back to me if further
assistance is required. I would be glad to assist you.
venkat -
Ftp_connect/ running at background job
Hi,
When I try to run the FTP_CONNECT FM in background,
the ftp server is not connected throwing an error message ''Attempt to set up connection to <ftpserver> failed''.
I am using the RFC destination SAPFTPA and still it is not working!
My program was successfully executing in fore ground with SAPFTP.
Please help.
Thanks and Regards,
KumarHave you gone through the following ? You have asked the Same again ................
Error in background job while running FTP_CONNECT
Kanagaraja L
Edited by: Kanagaraja Lokanathan on Jun 30, 2009 7:17 PM -
Background jobs pointing to old client after client copy
Hello
We have recently completed system refresh from PROD system to TEST system.
We have created new client in new TEST system. Background jobs are copied properly from old client to new client.
But all these jobs are pointing to old client only. We have deleted old client.
Hence all these jobs get cancelled.
How shall I change the client of all the jobs from old to new one.
-Nandu MorePlease check the thread:
Error in Background Jobs After Client Copy
Check some of the TBT* tables.
Maybe you are looking for
-
ERROR: Error from ejbc: in WLS 6.1 sp2 Win2K
Never had this problem before. Started new project using WLS 6.1 sp2 under Windows 2K Prof., using ANT & get; ERROR: Error from ejbc: In EJB NOTiFYEJB, method createUser defined in the remote interface either does not exist in the bean class, or it i
-
Hello; I wrote a small slide show app using dhtml and ajax. (java) I have everything working accept the pop up window, I get a java error when I try and click on the link for the larger image. Can anyone help me figure out how to fix this error? This
-
Can't copy pictures to a portable HDD
Hi, I am trying to select multiple pictures to copy across to a portable HDD. It will let me copy single pics, but when I want to copy multiple pics it won't let me do it because it says 'MyPicture.jpg' is busy. Well, I have thrown that file into the
-
Macro Guidance to Start With...
I have registered a new business domain and using 1and1 hosting and DO NOT want that loooooong Mac address issue - so I went with personal domain and cname (alias) and the site worked well EXCEPT for the email function. The Indian tech support for 1a
-
I am looking for a BC Developer to build a site for me. We are currently overbooked and need help in building an ecommerce site. I will provide all the design files and login to our BC temp site and you will build it. If you are interested please con