Error in background on GUI_UPLOAD.
Hi,
If i run a report in background which contains the function module : GUI_UPLOAD it is getting the error message as 'Error uploading C:\Documents and Settings\...' .
do the gui_upload wont execute in background?.
Please suggest.
Usefull anwers will be rewarded.
Neslin.
Hi
The GUI Upload and GUI download FMs are used only when the program is executed in the foreground only.
If we have to use the GUI download in the background u have to first create a program such that the file from the presentation server is trannsferred to the application server through the help of the dataset statements.
Then on onwards your program would be executed in the background succesfully.
Regards
Rajesh.
Similar Messages
-
Error in background job for program RSGET_SMSY error message No active job
Hello!
I would like to set up the Change Request Management functionality in SAP Solution Manager.
The only red warning by executing Test-button in Tcode SOLAR_ADMIN_PROJECT is:
<b>Error in background job for program RSGET_SMSY error message No active job found</b>
Can someone please tell me how to solve this problem?
(tcodes, technical steps)
Thank you very much!
regards
ThomThank you very much!
Can you also help me with the warning "Errors occurred during synchronization of the system landscape" in tcode SOLAR_PROJECT_ADMIN" --> System landscape --> Change requests --> "Refresh"?
The second issue I cannot see any projects in Tcode "/TMWFLOW/CMSCONF"
according to the SPRO-step "Set Project Assignment of Requests as Mandatory"
Thank you!
regards -
Our facility is running AE CS6 ver 11.0.0.378 on 8 core Mac Pros with 32 Gb ram running OSX10.6.8
using Thinkbox Deadline 5.2 for distributed rendering to other 8 Core Mac Pros with 32 Gb ram.
The issue is that we are in crunch mode trying to deliver 4K comps (soon to be 8k comps) and we are experience substantial
delays 10-20 minutes after the AERENDER starts, but before it starts doing any fruitful rendering.
We are reading from and writing to Quicktime movie files (which normally works just fine for us) and thus the entire frame range needs
to get computed on a single host.
The symptom is that many comp jobs (but not all) stall for a while with no apparent actibity before spitting this messgage, but then happily
and swiftly complete each frame in a second or less with no errors:
0: STDOUT: PROGRESS: There is an error in background rendering so switching to foreground rendering after 0 frames completed out of total 576 frames.
0: STDOUT: PROGRESS: 00001 (1): 20 Min, 16 Sec
0: STDOUT: PROGRESS: 00002 (2): 1 Seconds
0: STDOUT: PROGRESS: 00003 (3): 0 Seconds
0: STDOUT: PROGRESS: 00004 (4): 1 Seconds
0: STDOUT: PROGRESS: 00005 (5): 2 Seconds
0: STDOUT: PROGRESS: 00006 (6): 1 Seconds
Given that the delay, seems to be related to the number of frames (350 frames creates a 10 min stall and 576 frames creates a 20 minute stall), it seems like it's trying to do something for every frame in background mode, before it gives up and does them quickly
in foreground mode. During this time, there doesn't seem to be any signficant CPU or Network or IO activity. I looked for command line args that might force AERENDER to foreground mode, but didn't find anything.
Here's what the digested submission args look like.
0: INFO: Startup Directory: "/Applications/Adobe After Effects CS6"
0: INFO: Process Priority: BelowNormal
0: INFO: Process Affinity: default
0: INFO: Process is now running
0: STDOUT: PROGRESS: 12/6/12 10:37:54 AM PST: Starting composition sc20_assem_R_v57 .
0: STDOUT: PROGRESS: Render Settings: Best Settings
0: STDOUT: PROGRESS: Quality: Best
0: STDOUT: PROGRESS: Resolution: Full
0: STDOUT: PROGRESS: Size: 1200 x 860
0: STDOUT: PROGRESS: Proxy Use: Use No Proxies
0: STDOUT: PROGRESS: Effects: Current Settings
0: STDOUT: PROGRESS: Disk Cache: Read Only
0: STDOUT: PROGRESS: Color Depth: Current Settings
0: STDOUT: PROGRESS: Frame Blending: On for Checked Layers
0: STDOUT: PROGRESS: Field Render: Off
0: STDOUT: PROGRESS: Pulldown: Off
0: STDOUT: PROGRESS: Motion Blur: On for Checked Layers
0: STDOUT: PROGRESS:
0: STDOUT: PROGRESS: Solos: Current Settings
0: STDOUT: PROGRESS: Time Span: Custom
0: STDOUT: PROGRESS: Start: 00001
0: STDOUT: PROGRESS: End: 00576
0: STDOUT: PROGRESS: Duration: 00576
0: STDOUT: PROGRESS: Frame Rate: 23.976 (comp)
0: STDOUT: PROGRESS: Guide Layers: All Off
0: STDOUT: PROGRESS: Skip Existing Files: Off
0: STDOUT: PROGRESS:
0: STDOUT: PROGRESS: Output Module: APR_422HQ - Millions
0: STDOUT: PROGRESS: Output To: /Volumes/Renders/Scenes/20/sc20_assem_R_v57_r1_2k.mov
0: STDOUT: PROGRESS: Format: QuickTime
0: STDOUT: PROGRESS: Output Info: Apple ProRes 422 (HQ)
0: STDOUT: PROGRESS: Output Info: Spatial Quality = 100
0: STDOUT: PROGRESS: Include: Project Link
0: STDOUT: PROGRESS: Output Audio: Off
0: STDOUT: PROGRESS: Channels: RGB
0: STDOUT: PROGRESS: Depth: Millions of Colors
0: STDOUT: PROGRESS: Color: Premultiplied
0: STDOUT: PROGRESS: Resize: -
0: STDOUT: PROGRESS: Crop: -
0: STDOUT: PROGRESS: Final Size: 1200 x 860
0: STDOUT: PROGRESS: Profile: -
0: STDOUT: PROGRESS: Embed Profile:
0: STDOUT: PROGRESS:
0: STDOUT: PROGRESS: Post-Render Action: None
We're under the gun to get this production delivered, and these delays are killing us. I worry when we switch to 8K comps
that the "fruitless delay time" will just get longer.
I'm currently trying to correlate the plug-in assortments in effect for the shots that exhibit this behaviour. Clearly in "foreground mode" the machines are capable of rendering the shot quickly. We've speculated, that posibly some plugins may be GPU or OpenGL accelerated (these machines have ATI Radeon HD 5770 cards) despite the fact that AERENDER probably doesn't require special graphics cards).
Anyone have any ideas, especially if there is some way for force the foreground mode from the start?
Regards,
Jay Production IT Support.Just to follow up, Our compositing supervisor was still convinced that running with MP was the way to go, so I worked
with him to run some benchmarks on medium and heavy shots that we determinied would trigger the issue in -MP mode.
The test scene was about 50 frames in length, and we ran it on the same hosts with -MP on and -MP off, and also ran a
version of bundled frames (10 frames per host/task) and another where we did all 50 frames on a single host (with and without MP).
Interestingly, in every scenerio of these 4 cases, the version with -MP on, was 2-15% faster (despite the 10-11 minute delay at the start in MP mode).
His conclusion was it's still faster with -MP mode ON, and requested that I continue to explore for patches or theories how we might get around the delay.
Have read links:
http://forums.creativecow.net/thread/2/1025525
http://helpx.adobe.com/content/help/en/after-effects/using/memory-storage1.html
Regards,
-Jay- -
Error in background process.
I have a report that lets you choose between executing in background or not. As far as I see, in both cases the same subroutines are executed, though if you choose to execute directly a list is shown on screen and you are asked to push exec to have the last part of the program executed.
I am getting an error when choosing background, and so far I get a time-out error whenever I try to debug.
Is it possible that a variable is not being cleared because the process is in background?
I paste below the report's code, in case someone sees any difference I'm missing...
Thanks in advance,
S.
CODE:
REPORT ZFI_GENERACION_UTE_AF
MESSAGE-ID ZFI
NO STANDARD PAGE HEADING
LINE-SIZE 116.
*Declaración de includes
INCLUDE .
INCLUDE ZFI_BATCH_INPUT.
INCLUDE ZFI_UTE_TOP_AF.
Definición de la pantalla de selección
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS: P_KOKRS LIKE TKA01-KOKRS OBLIGATORY.
SELECT-OPTIONS: P_BURKSN FOR SKB1-BUKRS OBLIGATORY.
SELECT-OPTIONS: P_GSBERN FOR BSIS-GSBER.
SELECT-OPTIONS: P_BURKSU FOR SKB1-BUKRS.
SELECT-OPTIONS: P_GSBERU FOR BSIS-GSBER.
PARAMETERS: P_GAJHR LIKE BKPF-GJAHR OBLIGATORY,
S_MONAT LIKE BSIS-MONAT OBLIGATORY,
P_BLDAT LIKE BKPF-BLDAT OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B1.
Bloque1 'Tipo de procesamiento: Online - Background'
SELECTION-SCREEN BEGIN OF BLOCK BLOQUE1 WITH FRAME TITLE TEXT-004.
PARAMETERS:
X_ONLINE NO-DISPLAY, " RADIOBUTTON GROUP TYPE, " Ejecutar on-line
X_BATCH NO-DISPLAY. "RADIOBUTTON GROUP TYPE. " Ejecutar en fondo
SELECTION-SCREEN END OF BLOCK BLOQUE1.
SELECTION-SCREEN BEGIN OF BLOCK BLOQUE3 WITH FRAME TITLE TEXT-016.
PARAMETERS:
P_PARC RADIOBUTTON GROUP TIPO,
P_TOTAL RADIOBUTTON GROUP TIPO DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK BLOQUE3.
PARAMETERS: NUM_DOCS TYPE I DEFAULT '1000'.
PARAMETERS: P_CODIGO TYPE ZCODIGO_NEGOCIO.
*Declaración de includes
INCLUDE ZFI_UTES_F001_AF.
LOGICA DEL PROGRAMA
*Definición de inicializaciones
INITIALIZATION.
PERFORM INICIALIZAR_DATOS.
*Proceso principal
START-OF-SELECTION.
PERFORM INI_CABECERA.
Procesamiento Online
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
PERCENTAGE = 0
TEXT = TEXT-011.
CLEAR CONTABILIZADO.
PERFORM: INICIALIZAR_ESTRUCTURAS,
CONFECCION_ASIENTOS,
Si UTEs impuras se crearan los siguientes asientos
En la empresa ZZZI sólo se generarán apuntes para las cuentas
de la tabla ZHKONT_IMPURAS en las empresas ZZZ8 y ZZZ9.
add sis3e 14/01/05
CONFECCION_ASIENTO_NOD_FERR,
fin add sis3e 14/01/05
CREAR_ASIENTOS_CONTRARIOS.
CLEAR SALIR.
*Acciones de final de proceso
END-OF-SELECTION.
PERFORM VISUALIZAR_TI_APUNTES.
IF NOT SY-BATCH IS INITIAL.
PERFORM CONTABILIZAR_DOCUMENTOS.
ENDIF.
*Definición de cabeceras del listado
TOP-OF-PAGE.
PERFORM BATCH-HEADING(RSBTCHH0).
PERFORM CABECERA_INICIAL.
TOP-OF-PAGE DURING LINE-SELECTION.
PERFORM BATCH-HEADING(RSBTCHH0).
*Definición y control de acciones a tomar según entrada del usuario
AT USER-COMMAND.
CASE SY-UCOMM.
WHEN 'EJEC'. " Ejecutar Contabilizaciones
PERFORM CONTABILIZAR_DOCUMENTOS.
WHEN 'ENDE'.
Finalizar
LEAVE PROGRAM.
WHEN 'ABR'.
Cancelar
LEAVE PROGRAM.
ENDCASE.
*Validaciones de los parámetros de entrada
AT SELECTION-SCREEN.
KOKRS = P_KOKRS.
moneda de la sociedad
SELECT SINGLE WAERS FROM TKA01 INTO TKA01-WAERS
WHERE KOKRS = KOKRS.
MONEDA_FERR = TKA01-WAERS.
IF CONTROL_SELECTION = '1'.
PERFORM VALIDACIONES_SCREEN_SELECCION.
CONTROL_SELECTION = 2.
ENDIF.Hi,
Did you mean to say 'last part' of the program is executed after pressing button on application toolbar?
So even if you execute in background the list should appear and after that you need to see what the program is doing,
Rgds,
Sandeep -
Error in background job for VT04 - RV56TRGN
Hello!
The selection criteria is fine - we want every shipping point to be used to create every variant. We also have TPPs mirroring the plant codes. The job log sepects some deliveries which are good and tries to process them - the endlogue is it found X no. of deliveries, processed them but did not write the shipment to the data base. Digging further, it shows the error - <u>the system cound not determine the TPP for the plant in the delivery line item.</u>
When I look at the variant, it doesn't talk of the TPP at all - only the shipping point and all the other criteria mainly associated with the deliveries and their statuses. I am wondering how the system knows which TPP to use for each shipping point when no TPP is assiged in the variant? Is this a default configuration I am missing? Or something else? Appreciate any leads...
Thanks a lot.PS: In addition to creating the shipments, we also need to make their status to 'complete' in the background job as it is a purely non value added activity for us but we need the shipments for the cost documents. Any ideas how I can go about that?
Thanks. -
Error in background job while running FTP_CONNECT
Dear Friends,
When I try to run the FTP_CONNECT FM in background,
the ftp server is not connected throwing an error message ''Attempt to set up connection to <ftpserver> failed''.
I am using the RFC destination SAPFTPA and still it is not working!
My program was successfully executing in fore ground with SAPFTP.
Please help.
Thanks and Regards,
Vidya Sagar.Hi,
The below program is to create file on FTP server by taking the data from internal table
To see whether the file is created on the FTP server
use the function module FTP_SERVER_TO_R3.
Check the below code.
You write a same program with the function module FTP_SERVER_TO_R3 instead of
FTP_R3_TO_SERVER to check the existence of the file which is already created.
tables: t777a. "Building Addresses
Internal Table for Building table.
data: begin of it_t777a occurs 0,
build like t777a-build, "Building
stext like t777a-stext, "Object Name
cname like t777a-cname, "Address Supplement (c/o)
ort01 like t777a-ort01, "City
pstlz like t777a-pstlz, "Postal Code
regio like t777a-regio, "Region (State, Province, County)
end of it_t777a.
Internal Table for taking all fields of the above table in one line
separated by u2018|u2019(pipe).
data: begin of it_text occurs 0,
text(131),
end of it_text.
Constants: c_key type i value 26101957,
c_dest type rfcdes-rfcdest value 'SAPFTPA'.
data: g_dhdl type i, "Handle
g_dlen type i, "pass word length
g_dpwd(30). "For storing password
Selection Screen Starts
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE TEXT-001.
parameters: p_user(30) default 't777a' obligatory,
p_pwd(30) default 't777a' obligatory,
p_host(64) default 'XXX.XXX.XX.XXX' obligatory.
SELECTION-SCREEN END OF BLOCK blk1.
SELECTION-SCREEN BEGIN OF BLOCK blk2 WITH FRAME TITLE TEXT-002.
parameters: p_file like rlgrap-filename default 't777a_feed.txt'.
SELECTION-SCREEN END OF BLOCK blk2.
Password not visible.
at Selection-screen output.
loop at screen.
if screen-name = 'P_PWD'.
screen-invisible = '1'.
modify screen.
endif.
endloop.
g_dpwd = p_pwd.
Start of selection
start-of-selection.
To fetch the data records from the table T777A.
select build stext cname ort01 pstlz regio
from t777a
into table it_t777a.
Sort the internal table by build.
if not it_t777a[] is initial.
sort it_t777a by build.
endif.
Concatenate all the fields of above internal table records in one line
separated by u2018|u2019(pipe).
loop at it_t777a.
concatenate it_t777a-build it_t777a-stext it_t777a-cname
it_t777a-ort01 it_t777a-pstlz it_t777a-regio
into it_text-text separated by '|'.
append it_text.
clear it_text.
endloop.
To get the length of the password.
g_dlen = strlen( g_dpwd ).
Below Function module is used to Encrypt the Password.
CALL FUNCTION 'HTTP_SCRAMBLE'
EXPORTING
SOURCE = g_dpwd "Actual password
SOURCELEN = g_dlen
KEY = c_key
IMPORTING
DESTINATION = g_dpwd. "Encyrpted Password
*Connects to the FTP Server as specified by user.
Call function 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
text = 'Connecting to FTP Server'.
Below function module is used to connect the FTP Server.
It Accepts only Encrypted Passwords.
This Function module will provide a handle to perform different
operations on the FTP Server via FTP Commands.
call function 'FTP_CONNECT'
EXPORTING
user = p_user
password = g_dpwd
host = p_host
rfc_destination = c_dest
IMPORTING
handle = g_dhdl
EXCEPTIONS
NOT_CONNECTED.
if sy-subrc ne 0.
format color col_negative.
write:/ 'Error in Connection'.
else.
write:/ 'FTP Connection is opened '.
endif.
**Transferring the data from internal table to FTP Server.
CALL FUNCTION 'FTP_R3_TO_SERVER'
EXPORTING
HANDLE = g_dhdl
FNAME = p_file
CHARACTER_MODE = 'X'
TABLES
TEXT = it_text
EXCEPTIONS
TCPIP_ERROR = 1
COMMAND_ERROR = 2
DATA_ERROR = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
write:/ 'File has created on FTP Server'.
ENDIF.
Call function 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
text = 'File has created on FTP Server'.
To Disconnect the FTP Server.
CALL FUNCTION 'FTP_DISCONNECT'
EXPORTING
HANDLE = g_dhdl.
To Disconnect the Destination.
CALL FUNCTION 'RFC_CONNECTION_CLOSE'
EXPORTING
destination = c_dest
EXCEPTIONS
others = 1.
Regards,
Kumar Bandanadham -
Error in Background Job Processing.
Dear All,
I am using a background job for processing the outbound delivery.
In the user exit in delivery program I am checking for the combination of
ship to party, Material & Batch of outbound delivery in a ztable. If the combination exists in
Ztable I do not want to save & ignore this delivery creation and continue with the next
delivery order creation thru the batch job.
However I need to give an error / warning message for the delivery orders
which are not created so I am giving the error message as success message
in the below format :-
IF L_RETURN-TYPE = 'E'.
MESSAGE S000(Z64_I) WITH L_RETURN-MESSAGE_V1
L_RETURN-MESSAGE_V2
L_RETURN-MESSAGE_V3
L_RETURN-MESSAGE_V4
DISPLAY LIKE 'E'.
PERFORM FOLGE_GLEICHSETZEN(SAPLV00F).
FCODE = 'ENT1'.
SET SCREEN SYST-DYNNR.
LEAVE SCREEN.
ENDIF.
But my job is finished as soon as the above message is encountered and the
rest of the outbound deliveries are not created.
However if I execute the progarm in foreground the execution is working fine.
Could you please let me know what do I need to code / do corrections to make
the program run successfully in background.
Thanks & Regards
Jitendra GujarathiHello,
Check system log and also check work process trace, to know the error.
I feel that it could be Authorization issue, you don't have sufficient authorization to do.
Hope this helps.
Regards
venkata
Edited by: venkata emandi on Sep 12, 2011 8:13 AM -
Spool error for background job
Hi All,
I have scheduled one job in sap for a report.I have made a distribution list via tcode SO01.
I have given this distribution list to the SPOOL RECEPIENT section in SM 36.
The job is running successfully but is giving the following error and not sending emails to the distribution list.
The error is :-
"Spool list of step 1 could not be sent due to error 7".
Does anybody has any idea about this error?
Please help its a production issue.
Thanks in advance
Vivekanand MeghmalaLook at SAP note : 760838
Symptom
Background job spool lists are not sent.
Other terms
RSBTCRTE, RSPO_SPOOLJOB_TO_OFFICE, SO_DOCUMENT_SEND_API1
Reason and Prerequisites
1. The jobs in question have recipient references in table TBTCO but these have no equivalent in the Business Object Repository.
2. An error occurs when sending in the spool or in the Sapconnect layer.
Solution
This note does not provide a direct solution to the problem but it does provide a source code enhancement that you can use to create more trace information about the cause of the error. When you copy and execute a job with spool list recipients, trace messages are output when errors occur.
After implementing the correction instructions, use transaction SE91 to create the following message:
Message class: BT
Number: 347
Text: Spool list of step &1 could not be sent due to error &2.
In detail, the error numbers mean:
1 = Spool request does not exist (or no longer exists)
2 = Spool request does not contain any data
3 = Empty page area selected
4 = No authorization to send the request
5 = Access to the spool request is not possible
6 = Read error in the Temse layer
7 = Spool request could not be sent (sending problem)
8 = Incorrect request type
9 = Other -
Batch Input error in background in fb05
Hi All
I am trying to clear vendor open items for document numbers from BSIK table.
i am doing this using fb05 transaction, checking the 'post with clearing' option.
The program creates a batch input session.
When i process the session in foreground, the vendor document is cleared and a new clearing document is posted.
However, if i try to process the session in background , we get the error "Difference too large for clearing". The error is shown in program SAPMF05A and screen number 700. Whereas, my recording does not have this screen number .
Even when i anlyze the session screen flow, i do not see this screen number.
Any pointer on the issue shall be of great help.
Thanks
PankajHi
thanks for the pointer.
I agree that we get this error if the items are not selected.
Could it be that the items are activated by default in foreground mode , and deactivated in the background mode?
Moreover, could you please give some more info about " the std bi RFBIBL00, it supports the trx FB05" ?
Thanks
Pankaj -
Segmentation error in background
Hello,
We have a problem creating a target group after a patch upgrade.
We want to create a target group using the infoset CRM_MKTTG_BP_BIRTHDATE. The filter that we apply is +1d.
If we built the TG in background, we are getting the error "Business partner does not exist" for all the partners in the TG. On the other
hand, if we take a look at the error, the number of partners that we are obtaining is correct. The program that generates the errors is
CRM_MKTTG_TG_BUILD.
But if we built the TG directly, not in background, we are getting no errors and everything looks good.
As I said, we are getting this error after a pacth upgrade.
In the attachment you have the result of what I comment. The first implementation has been online, and the second is the background and everyone has returned error "The business partner does not exist."
Thanks.Hi Juan,
From the screenshot I see that you are using the segment builder applet. May I know what version of CRM are you using. When you say patch upgrade, to which patch level have you upgraded.
What ever you are trying to do here appears to be standard. I would suggest you to open a SAP Message for this issue .
Hemanth -
Error in background processing
Hi all,
I am geting this error in back ground job as "ABAP/4 processor: SPOOL_I/O_ERROR".
can anyone help.
Regards,
TarangHi,
Normally this problem will occur from Basis side,
you better to contact basis guys,
They will schedule the background jobs, some time it will run into one group, if any problem with that group, this problem will occur. You better to talk them they will tell the where the problem.
regards
rams -
SAP mail not received for transfer order errors in background
Hi All,
We need to set up automated mails to SAP inbox in case there is any error during automatic TO creation in the background. The customizing for this has been done. Now in OMKX for MAIL messages we have two options, either tick the document user or put a user id in the recepient field. If I put a user id in the recepient field the user gets the job spool in the inbox everytime the job is run. However when the 'document user' box is checked it does not send the notification to the inbox of the user who had created the material document when there is some error in the TO creation background job. The mail control indicator 'A' has been set up in OMKX under both MAIL messages and movement types. Am I missing some setting? Note that auto TO creation is successfully happening in background so all its relevant settings are in place.I have just scanned down 9 pages in the discussion and found a discussion thread already running for my problem with google mail....... http://discussions.apple.com/thread.jspa?threadID=874063&tstart=120
-
Hi,
I have a report which modifies the contract, source list etc., if I run it in foreground it updates and download data into application server properly. but when i m running in background it is getting cancelled and it throws the following error message "System error (error in method if_purchase_out_header~post)".
Please let me know why this is happening.
Regards,
Ramesh.Hi,
please check if this method can be used in background. -
BDC FOR VL02N FOR Batch DETERMINATION --ERROR IN BACKGROUND
HI,
I am running a BDC in Background Mode for VL02N Transaction for Batch Determination. When i run this BDC in Foreground its working Fine, But when i use Background Mode its not working.
Error in Messtab : LIPS-POSNR(1).
Flow is like : Vl02n - enter delivery..then select a material in that delivery and click on batchdetermination.
So its giving me error in LIPS-POSNR(1).
Can u suggest something..
Thanxs
RISHIHi,
Check whether proper ok-code has been assigned to the line to be selected in back ground, in foreground as there is always a manual intervention,we will never come to know these kind of trivial issues,
Rgds, -
SRM 7.0 - RBDAPP01 error in background elaboration
Hi all,
we have a problem with the program RBDAPP01 (background mode) only with the shopping cart from Germany.
In the spool of the elaboration we have the message BBP_PD 001 "Buffer table not up-to-date" but in foreground mode we don't receive any message. Are not present errors in ST22. It's not possible to reply the case in quality.
Any idea?
Kindly give your responce.
Thanks in advance.
Regards,
DiegoHi,
Any suggestions?
Please advise.
Regards
Maybe you are looking for
-
Unable to view catalog after migrating from OBIEE10g to 11g
Hi All I migrated "rpd and catalog" using "Upgrade Assistant" utility (Ora_Home\bin\ua.bat) available in OBIEE 11g. But after migration, I am unable to view my catalog and even create analysis reports in Analysis of 11g. Do I need to do something add
-
Understand the memory consumption in Solaris
Hi All, There is some things that I don't understand on Solaris, regarding the memory utilization. In my research on google, I have found this very usefull command : echo "::memstat" | mdb -k the output is : root@localhost > echo "::memstat" | mdb -k
-
On demand error - box does not have enough credit
For the duration of the day I cannot watch free on demand programs. For example, when I attempt to play an NBC show it states that that my box does not have enough credit and to call customer service. I am calling the The number given and entering th
-
Document Attachment via Manage Attachments
Hi All, I am trying to find where I could customize the document attachment logic of RPM. The document is attached via Home->Universal Worklist->Manage Attachments. Customization required is to rename all documents manually attached. Are there any BA
-
HTTP with RFC destination problem
Hi, We're doing an SAP R/3 --> XI --> External System scenario. We've had no problems making the SAP R/3 to XI work. For XI to External System, we're using the Plain HTTP adapter with an RFC destination. The Server, Intermediate and Root CA of the Ex