Error in BD12 when setting Account group filter for ZDEBMAS

Hi ,
I am getting error "Internal error: Program read table idoc_structure, command data_select_for_block, argument Z1ADRC" when executing the BD12 to send customer of Account group other than 'ZSB' and able to get IDOC for the ZSB account group customers.
I created object type in BD59 and assigned in BD95. I set the filer in BD64 for object type Account group as 'ZSB'.
Please reply if any of you have solved this type of error.
Thanks & Regards,
Rajesh Sanapala.

Hello,
Can anybody help me on the above issue.
Thanks ,
Rajesh.

Similar Messages

Error message "SE 518 No account assignment exists for service li ne 000000

Hi All,
Customer is using SRM 7.0 Self-Service procurement
Shopping cart created with multiple service items, once it approved. We get the Error message "SE 518 No account assignment exists for service li ne 0000000000" in Shopping cart Monitor. Could you please help me here why this issue happening.
FYI:- Same user created another shopping cart with same data, this error not occurred. This error is happening a while not regular for the same item ordering.
Could you please help me on this what may be issue here?
Appreciated your help in Advanced.
Cheers
Raj

Hi Raj,
Have you already tried the notes below?
499626     FAQ: BAPIs in the service procurement
1472036     Limit PO with account assignment can not be transferred
1140132     Error SE 518 when creating purchase order with contract
1557395     SE 518 error message for service items during PO creation
1226132     SE518 Error message from back-end system for service item
Best regards,
Christian Zeuch

Trying to purchase trial period in different email address - error message "Error in Your Order The account was registered for a different country. Please sign out and sign in using an existing account for this country. Ok"

Trying to purchase trial period in different email address - error message "Error in Your Order The account was registered for a different country. Please sign out and sign in using an existing account for this country. Ok"@

Hi boags2014,
Please refer this link and know the work-arounds for the same:
How do I complete a purchase when I get an incorrect "country" error?
Regards,
Anubha

Error in Your Order The account was registered for a different country. Please sign out and sign in

Hey,
when I try to buy products I'm getting the following error when going to checkout:
Error in Your Order
The account was registered for a different country. Please sign out and sign in using an existing account for this country.
how do fix it?

Hi boags2014,
Please refer this link and know the work-arounds for the same:
How do I complete a purchase when I get an incorrect "country" error?
Regards,
Anubha

Error in Your Order The account was registered for a different country.

go to upgrade and this is hwat it says. I have been online to check out oters answers and have tried everything suggest and still no good. i did just get a letter saying my information had been illegally found by someone. Can they ahve changed my settings without me knowing it.
the error once i am in my cart says the follwoing
Error in Your Order
The account was registered for a different country. Please sign out and sign in using an existing account for this country.
Ok

Hi;
Please review this related FAQ if you have not already and try the steps in here: http://forums.adobe.com/docs/DOC-2984
If that does not help let me know and confirm whether the AdobeID (email address) you used to sign into this Forum is the same as your FormsCentral account and I will forward to support.
Thanks,
Josh

Logic error: "Image size error [...] too large" when setting a group chat picture *UNDER* 512px

Skype version: 4.3.0.37 on Arch LinuxI'm able to set a group chat's image to this image (513x513px, 60240bytes), but as soon as I crop it to something smaller, like this image (512x512px, 59544bytes), it gives me the following error message:even though the image is actually smaller than before. So the error message shows up for images that are of size less than or equal to 512px, giving a misleading information saying that the image is too big while the actual code is restricting it to a minimum of 513px. Edit: Also, there's a bug with the community. In making this post, I used my website to host the images, but then the forums automatically replaced every instance of my Skype username with "[Removed for privacy]", including in the link tags. So the links were mutated into "http://[Removed for privacy].me/misc/skypebug/513x513.jpg" etc.

Yes this is a real pain. I'm using v 4.3.0.37 with Fedora having the same issue. This seems not due to te image dimensions.If anyone found a workround?

Error 401 (Unauthorized) when setting up Hybrid Search

Hello,
I am trying to set up Hybrid Search (one-way out-bound search) between a SharePoint 2013 on-premises farm I've got running on Windows Azure (IaaS) and a SharePoint Online trial tenant I have set up for the purpose.
I have followed Manas Biswas' rather long guide (search for manas biswas hybrid search on Bing to find it) for setting it up and everything has gone fine -- including setting up my SharePoint 2013 farm in a demo lab on Azure, signing
up for a SharePoint Online tenant, getting DirSync to work, etc. Actually, I hadn't bumped into any errors until the very end when I wanted to try out my setup.
I had just set up SharePoint Online as a search result source on my SharePoint 2013 team site. I have also set up the search query rule with the result block for the SP Online results. Yet, when I try to use the Query Builder and I search for "*",
I get the following error:
System.Net.WebException: The remote server returned an error: (401) Unauthorized. at System.Net.HttpWebRequest.GetResponse() at Microsoft.SharePoint.Client.SPWebRequestExecutor.Execute() at Microsoft.SharePoint.Client.ClientContext.GetFormDigestInfoPrivate() at Microsoft.SharePoint.Client.ClientContext.EnsureFormDigest() at Microsoft.SharePoint.Client.ClientContext.ExecuteQuery() at Microsoft.Office.Server.Search.RemoteSharepoint.RemoteSharepointEvaluator.RemoteSharepointProducer.RetrieveDataFromRemoteServer(Object unused) at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at Microsoft.Office.Server.Search.RemoteSharepoint.RemoteSharepointEvaluator.RemoteSharepointProducer.ProcessRecordCore(IRecord record)
Now, I don't know why this operation is rejected as "unauthorized." I am unsure of my certificates, which I have generated and set up in order for the connection to work. Out of all the steps in Biswas' guide, the certificates part is the one I
have the least knowledge about. I am suspecting that there is something wrong in this area but I have no idea of how to troubleshoot it.
To make it clear, I did not encounter any error messages while following the guide -- not even when firing off the fair amount of PowerShell scripts that Biswas has written.
I would appreciate it if anybody could help me troubleshoot this problem. I am running out of ideas to try out so any suggestion will appreciated! :-)

Hi Sebastian and Manas,
I am trying to set up a hybrid environment and followed the blog posts. Everything was set up as per the guidelines mentioned but still I am not able to fetch any results from SharePoint Online inside my on-premise environment.
There are no errors coming as such. Its just that my on-premise is showing no results from SPO. However if the same user logs on into the Office 365 SPO site he is able to see SPO search results. That means there is no permission related issue specific to
test user.
I am totally out of ideas now. In case you have faced similar issues while setting up the same then any pointers to troubleshoot would be very helpful.
The link to my query that I have asked on the forums is
https://social.msdn.microsoft.com/Forums/office/en-US/540d2629-ec6b-4905-b8e2-f6ba4e770d26/configure-one-way-outbound-hybrid-search?forum=sharepointgeneral
Thanks,
Geetanjali
Geetanjali Arora | My blogs |

Adobe Photoshop Lightroom 5.7 error this message when I import a picture for editing

Dear Friend
I am writing on this forum to asking you for help. a few day a go I am headache with my Lightroom 5.7 software. when I import a picture for editing it alert the message above. So I can not do anything with any picture for my work it so boring. I read many forum they talk about disk utility to repair the permission and set the permission folder I try all these but I still can not fix it. any one can explain me on detail about this kind of issue. and I really appreciate for those who can solve this issue.
thanks in advance for your helping me
Ken Chariya

Dear dj_paige
Let I explain you about this picture. Ya is my destination folder I put all my picture in this folder. and then I right click on it --> and then go to get info after that --> this dialogbox window apear and I change all the permission to read and write. when I open light room and import the destination folder Ya. I still meet the same problem " Some import operation were not performed. Could not move a file to the request location." do you have any solution beside of this please let me know.
thanks
Ken chariya

Currency vs Account group restriction for vendor master

Dear All,
Is it possible to restrict the user from using inr for Import vendors account group and other currencies for domestic vendor account group in standard????

Hi,
Through authorization object F_LFA1_GRP (Vendor: Account Group Authorization ) field - KTOKK (Vendor account group) you can restrict user to create particular type vendor i.e Import Vendor or Domestic Vendor etc. Pls refer below screenshot...
As k your Basis user to restrict as per account group ....Through PFCG transaction..
Regards
Abhishek Tiwari

Customer Account Group Mark for deletion

Hi Experts,
As per the business requirement i need to block some of the customer account groups like(z001,z002 and z003)
is there any config settings available for marking these account groups as blocked or only deletion is possible.
Thanks in advance
Regards
Satprk

I am not sure whether the account group can be blocked by any means. I would not recommend deleting from the SPRO account group table data as it will affect the historical data.
However, you can control using these account group using authorization objects. Check with basis personal to exclude these account groups from using in XD01 t.codes.
Regards,

Photoshop CC quits when setting up soft proof for Moab Slickrock paper

I use a Mac Pro with Mountain Lion and Photoshop CC, all with current updates. I had no problem downloading and using the Moab Slickrock icc profile from their website to make a test print. When I try to set up soft proofing, view-proof setup-custom, and choose Slickrock as the device to simulate, Photoshop quits suddenly. I tried it multiple times, restarted the computer, restarted Photoshop, removed and re-installed the profile all to no avail. I then installed the profile for Moab Lasal, and was able to set up soft proofing for Lasal with no problem. I can set up Slickrock with my copy of Photoshop CS6 with no problem and also with Lightroom 5.3 it will soft proof. I wrote to Moab and they said it was a known bug with no current solution.
Do you have any idea what is going on?
Soft proofing is not critical, but I do like to use it when I can.
Eric Brody

I am having this issue as well. I tried lightroom, but the soft proof is buggy there - it's a known bug I saw written up on MOAB's page. Supposedly Photoshop CS5 worked OK softproofing with this profile, but evidently, CC does not.

Patch for error code 2131 when burning CDs in itunes for Toshiba computers:

Just today, Toshiba posted patch for the infamous "error code 2131" when trying to burn CDs in itunes on many Toshiba laptops. Lucky for me, today was the first time I tried to do so, but I feel for all you other folks who have been very frustrated about this issue. Here is the link to it on the Toshiba support page:
http://www.csd.toshiba.com/cgi-bin/tais/su/susc_dtlViewDL.jsp?soid=2024958&moid=1909174&rpn=PSAF3U&BV_SessionID=@@@@043462335 6.1208403240@@@@&BV_EngineID=cccgadedlgfhkdecgfkceghdgngdgnn.0&ct=DL&alldocs=false
I'm going to install it now and report back if there is anything tricky about it (I read in another forum that someone had already gotten the patch and had posted a link to it at a private website where there were a few different options and you had to figure out which was the right one, but this should be easier and "official")
Hope this helps!

Dell Inc. Dell DM051
hmmmmm. i'm proceeding under the assumption that you've got a Dell 5150/E510. if i'm wrong about that, please check in with Dell to confirm your model prior to applying any updates.
i had a look at the support site for your model (or at least, what i'm assuming your model is). your firmware appears to be up to date for the HL-DT-ST DVD+-RW GWA4164B that you're getting the error on, but there does seem to be newer firmware available for the SONY DVD-ROM DDU1615. so it might be worth getting that, just in case there some kind of odd interaction happening between the drives.
Dimension 5150/E510
otherwise, we'd better check on some of the other usual suspects with this sort of thing:
iTunes for Windows doesn't recognize my audio CDs
... and these resources might be helpful with that:
Using CD Diagnostics in iTunes for Windows to troubleshoot CD/DVD drive issues
Updating the drivers on your Windows PC

Clarification on Account grouping -OMWN for 101 movement type

Hi SAP MM gurus,
In OMWN - Account grouping , I am not able to find any entry for 101 (Goods receipt for Purchase order B and with no consumption posting ) with Value and Quantity updates . There are entries for 101 movement type with special stock indicator but not able to find any entry for standard good receipt for Purchase orders ( No Special stock Indicator , Value and Quantity update checked , Movement type indicator B and No Consumption posting ). There are no issues with the accounting posting for goods receipt with standard purchase order with BSX being debited and WRX being credited. I am trying to understand the logic for this posting and I am not able to understand from where (customization settings) this posting is derived from. May I request your valuable inputs in understanding this logic.
Thanks in advance for your immediate response.
with regards,
Anandj

Hi there,
Not sure where you want to go... but here is a tip
Would it make sense to have value and qty update and no consumption ? it can either one or the other but not both.
Now in prg there are further checks that makes other option possible like a GR for PO that is not valuated.
Remember that these key determination behind the account grp / TE key is a kind of black box where the prg is hardcoded to sort out what keys to take.
I hope this helps... Cheers

Account Group Name for Vendor

For account group name the field is KTOKK , there is a name that goes with this which is the field Txt30.
Can someone tell me what table this belongs so I would be able to use it in a join. I can only find the Pooled Table that it belongs to.
Thanks,
Evan

Hi Evan,
Field Name for Vendor Account Group Name is TXT30 and it will store in Table T077Y
Reg,
Ashok
Close this thread, If answered.

Error with Informatica when running the data load for BI Apps

Hi All,
We are facing a different issue on prod which we haven't got on QA. Below given is session log :
Target tables:
W_ORDER_PARTY
READER_1_1_1> RR_4050 First row returned from database to reader : (Wed Sep 22 10:36:16 2010)
READER_1_1_1> BLKR_16019 Read [885] rows, read [0] error rows for source table [S_ORDER_BU] instance name [S_ORDER_BU]
READER_1_1_1> BLKR_16008 Reader run completed.
LKPDP_1> DBG_21097 Lookup Transformation [LKP_ETL_PROC_WID]: Default sql to create lookup cache: SELECT ETL_PROC_WID,ROW_WID FROM W_PARAM_G ORDER BY ROW_WID,ETL_PROC_WID
LKPDP_1> TE_7212 Increasing [Index Cache] size for transformation [LKP_ETL_PROC_WID] from [1048576] to [1050000].
LKPDP_1> TM_6660 Total Buffer Pool size is 609824 bytes and Block size is 65536 bytes.
LKPDP_1:READER_1_1> DBG_21438 Reader: Source is [SFAPROD1], user [siebel]
LKPDP_1:READER_1_1> CMN_1021 Database driver event...
CMN_1021 [DB2 Event Using Array Inserts. connect string = [SFAPROD1]. userid = [siebel]]
LKPDP_1:READER_1_1> BLKR_16003 Initialization completed successfully.
LKPDP_1:READER_1_1> BLKR_16007 Reader run started.
LKPDP_1:READER_1_1> RR_4049 SQL Query issued to database : (Wed Sep 22 10:36:17 2010)
LKPDP_1:READER_1_1> CMN_1761 Timestamp Event: [Wed Sep 22 10:36:17 2010]
LKPDP_1:READER_1_1> RR_4035 SQL Error [
*[IBM][CLI Driver][DB2/AIX64] SQL0204N "SIEBEL.W_PARAM_G" is an undefined name. SQLSTATE=42704*
sqlstate = 42S02
Database driver error...
Function Name : Execute
SQL Stmt : SELECT ETL_PROC_WID,ROW_WID FROM W_PARAM_G ORDER BY ROW_WID,ETL_PROC_WID
DB2 Fatal Error].
LKPDP_1:READER_1_1> CMN_1761 Timestamp Event: [Wed Sep 22 10:36:17 2010]
LKPDP_1:READER_1_1> BLKR_16004 ERROR: Prepare failed.
WRITER_1_*_1> WRT_8333 Rolling back all the targets due to fatal session error.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Sep 22 10:36:17 2010]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [LKP_ETL_PROC_WID], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Sep 22 10:36:17 2010]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [EXPTRANS1], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Sep 22 10:36:17 2010]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [EXPTRANS1], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Sep 22 10:36:17 2010]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [SQTRANS], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Sep 22 10:36:17 2010]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [SQTRANS], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Sep 22 10:36:17 2010]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [SQTRANS], and the session is terminating.
TRANSF_1_1_1> DBG_21511 TE: Fatal Transformation Error.
WRITER_1_*_1> WRT_8325 Final rollback executed for the target [W_ORDER_PARTY] at end of load
WRITER_1_*_1> WRT_8035 Load complete time: Wed Sep 22 10:36:16 2010
In the above log W_PARAM_G table is a warehouse table. We have checked Informatica to find out the issue but there is no error in informatica.
Thanks in advance.
Deepak.

Hi Sandeep,
Yes but if you see the log ,its connecting to OLTP DB(DB2 for Siebel source DB),which it shouldnt
KPDP_1:READER_1_1> DBG_21438 Reader: Source is [SFAPROD1], user [siebel]
LKPDP_1:READER_1_1> CMN_1021 Database driver event...
*CMN_1021 [DB2 Event Using Array Inserts. connect string = [SFAPROD1]. userid = [siebel]]*
LKPDP_1:READER_1_1> BLKR_16003 Initialization completed successfully.
LKPDP_1:READER_1_1> BLKR_16007 Reader run started.
LKPDP_1:READER_1_1> RR_4049 SQL Query issued to database : (Wed Sep 22 10:36:17 2010)
LKPDP_1:READER_1_1> CMN_1761 Timestamp Event: [Wed Sep 22 10:36:17 2010]
LKPDP_1:READER_1_1> RR_4035 SQL Error [
*[IBM][CLI Driver][DB2/AIX64] SQL0204N "SIEBEL.W_PARAM_G" is an undefined name. SQLSTATE=42704*
I Have check the mapplet ,its same no issues in that as well.
Regards,
Deepak.

Error in BD12 when setting Account group filter for ZDEBMAS

Similar Messages

Maybe you are looking for