Error in BDC program which is creating Work Order IW31

Hi All,
I am getting an error - 532 - " Specify only one start time/date " when running bdc program for txn IW31 in back ground. I run the same program in the foreground.. there is no error.. but when I run in background.. I am experiencing the above error.
Thank for Ur time.
Cheers
Senthil

Hi,
Are you facing this issue during Normal order creation with that functional location ?
Please check CC assignment to functional location and settlement rule applied while saving order.
Thanks
Riyaj

Similar Messages

How can I make settlement rule mandatory in create work order (IW31)

How can I make settlement rule mandatory in create workorder and saving without release.
I kanow we can make settlement rule mandatory upon Release order but here requirement is
Create work order (IW21) save without releasing that time settlement rule should default.

Hi,
1.If you want the settlement rule default then maintain account assignment data in technical object and when MO is created on that it would be copied into the settlement rule...
2. If you want to make those fields mandatory .... plz check up field selections in config , if you cannot find those then use SHD0 Transaction variant to make those fields mandatory.
3. Enter SHD0 , Enter IW31 in transaction and ZIW31 for transaction variant ..click create option and this takes you to IW31 initial screen , here enter required values of technical object etc and press enter and this gives you IW31 Initial scree screen variant , click continue and this takes you to inside screen and here enter required field values and on pressing enter gives you screen variant .. so you need to enter field values and check the flow of screen variants and on getting settlement rule screen variant select required option for the fields you need.
4. Finally you can save that in package created in SE80 for transporting to other client .., you can activate the variant in SHD0 -->Standard variants -->you can find activate option ..
regrds
pushpa

Authorization check creating Work Orders (IW31)

Hello everyone,
We need to make an authorization check when creating a Work Order in transaction IW31.
That check is based on the field "Main work center for maintenance tasks"
No check apart from the plant associated to the work center is done, but the problem is that there exist different Work Centers associated to the same plant, and we need to restrict it.
Our authorization model considers the Cost Center associated to the Work Center, but the Cost Center is not checked in this IW31 when entering the Work Center.
We have also tried using the classification system, but despite activating authorization obejct C_KLAH_BKL, is neither checked.
(It is amazing the difference between the number of objects marked to be checked in SU24 for this IW31 and the objects really checked when looking at authorizations trace)
We know that Work Center field exit could be used, but we would prefer not to change ABAP code.
Could you please give us a hint about how we can restrict this field?
Thank you very much.
Best regards.
Jose Sanz.

Hi Jose,
You can look at the object C_ARPL_WRK,
if you work with this , i hope you would be able to find a solution for this situation.
Thanks,
Vijay

Error while creating Work Order

Hello Experts,
I am getting below error while creating work order via add-on named beas but the error seems to coming from SBO.
Please advise.
Thanks
Deepak

Hi,
Plz check this thread:
What does this error mean?

Error creating work order for new notification - Related SyncBO not present

Hi,
We are working with MAM3.0 standard application.
We age getting an error while creating work order for a NEW notification.
In this scenario both notification and corresponding work order are also not created.
Here is the error for MAM30001 Sync BO in MEREP_MONI:_
Reading inbox record (mobile ID=0000001444, seq, no.=29, rcd_cntr=1, data=TOP0001000000
External format successfully converted to internal format: ldata=TOP0001000000000000000
Related SyncBO MAM30_010 with Sync key 0000000028 is not present on the device.
Return code 1 (DOWNLOADER)
   Here is the error for MAM30010 Sync BO in MEREP_MONI:_
Return code from RFC BAPI Wrapper call:Order NEW does not exist
Return code from RFC BAPI Wrapper call:The order/network type is not defined
Return code from RFC BAPI Wrapper call:Order NEW does not exist
Return code 0 (UPDATE MEREP_506-STATUS)
Can any body please tell me what is the sollutions for this error
your help in this regard is appreciable.
Regards,
Murthy

Hi Murthy,
II have no idea what patch level you are on. A while back we had similar issues with some clients. There are several patches around that area available. Perhaps you should have a look into patch 959732.
Hope that helps.
Regards,
Oliver

How to create Work Order in CMRO

Dear All,
We are new to using Oracle CMRO and because of unavailability of CMRO resources, we are facing quite a few problems while working on CMRO. Can anyone please help me out how can I create Work Order using CMRO.
If anyone can provide me with Oracle CMRO White Papers, I will be very thankful.
Regards,
Zulfiqar Ali Mughal

Hi,
There are 3 ways to create work order in oracle cMRO.
1) Through Maintenance Requirement and associated to visit and push to production.
2) Non-routine.
3) Unassociated Task.
1.     Create Work Order From Maintenance Requirement:- In order create work order first of all we need to define an MR in Engineering > Fleet Maintenance Program > Overview > Create. After creating the MR Header at least one route should be associated (Route can be created from Engineering > Route >Overview > Create and the status should be "complete"). Then MR effectivity (means which item or unit MR is applicable) need to be defined and in turn the interval threshold also need to define. Once the MR is completed from the Planning window associate the MR to a visit and push to Production. In case of Planned MRs run the Build Unit Effectivities and view the due date from the Planning> Unit Maintenance Plan screen and associate to a Visit in Planning and push the visit to production. In case of Unplanned MRs create visit, associate unplanned MR, push to production.Work Orders would have generated and visible in Execution >Production Planning > Work Orders.
2.     Create Non-Routine:- Non- Routines can be created from Execution and Planning
a.Create Non-Routine work order from Execution:- Select the Routine work order and select Create Non-Routine work order from the pull down menu, furnish the details like severity, urgency, summary etc. and click on (B) Apply.
b.Non-Routine from Planning: Create NR from Planning >Unit Maintenance Plan> Non-Routines (B)Create and then associate to a visit and push to production.
3.     Unassociated Task:-This is for executing the miscellaneous operations to be done as part of already created visit. Navigate the visit task screen in an already created visit (Navigation: Planning > Visit Work Package > Overview > Search the visit > Click on the visit hyperlink> view visit task in side Menu), From the drop down menu select the “ Create Unassociated Task” and click (B) Go. Furnish the details in the Task header and click on (B) Apply and (B) Cancel, you would be navigate back to the “Visit Task” Screen. Select the unassociated task and push to production. Unassociated work orders would have created. You can create Unassociated task any time during the execution, before closing of visit.

Error in Work order -IW31

Hello All,
We are facing one error while creating work order.
When we are creating work order from IH01 > Goto> Create order or directly creating from IW31 by putting PM03 in type , priority and equipment details then after release if we press save button then system says that invalid account group.
What can be reason for same.
Regards
Himanshu

Hi,
Are you facing this issue during Normal order creation with that functional location ?
Please check CC assignment to functional location and settlement rule applied while saving order.
Thanks
Riyaj

Create work order in 4.6C

Hi guys,
Have any of you seen any FMs for creating work orders in 4.6C?
Thanks
Mantas

Hello Mantas,
could you please check if the following BAPI can help fulfill your requirements.
BAPI_ALM_ORDER_MAINTAIN
I think that this what you are looking for.
Regards,
Isabelle

Create work order on 4.6C FM

Hey guys,
Just wondering if any of you have seen a function module for creating work orders in 4.6C?
Thanks
Mantas

Hi,
Do you mean PM work order?
In that case BAPI_ALM_ORDER_MAINTAIN
Regards

Create Work Order Using BAPI in LSMW

Hi All,
I searched in SCN but i dint get the correct idea to create Work Order USING BAPI,
Im trying to create Work Order Using BAPI in LSWM
Can any one Give me Brief Idea to create Work Order(Either Component or Operations) (t code - IW31) using BAPI in LSMW
Regards
Smitha

Hi All,
I searched in SCN but i dint get the correct idea to create Work Order USING BAPI,
Im trying to create Work Order Using BAPI in LSWM
Can any one Give me Brief Idea to create Work Order(Either Component or Operations) (t code - IW31) using BAPI in LSMW
Regards
Smitha

Error in bdc programing code-pls help

hi friends,
            I was tring to do a bdc program.But it shows me an error. MY bdc program is jus to upload a 2 fields in vendoe master table.
That is LIFNR,NAME1 field for the new vendors.
I worked out an execl sheet for this, and jus copied it to the text file by selecting all and pasting.
Even then i get an error code that BDC_open does not exits.
MY code is this, please help me if iam wrong.
If anyone can help to make it more understandable,I Kindly request you to try out this program with the screen shot and mail to this id [email protected] would be very thankful for your timely help.
report Z_PK_BDC
       no standard page heading line-size 255.
include bdcrecx1.
parameters: dataset(132) lower case.
parameters: p_file like rlgrap-filename default
                'C:\SAP TESTING\p_file.txt'.
   DO NOT CHANGE - the generated data section - DO NOT CHANGE    ***
If it is nessesary to change the data section use the rules:
1.) Each definition of a field exists of two lines
2.) The first line shows exactly the comment
      '* data element: ' followed with the data element
      which describes the field.
      If you don't have a data element use the
      comment without a data element name
3.) The second line shows the fieldname of the
      structure, the fieldname must consist of
      a fieldname and optional the character '_' and
      three numbers and the field length in brackets
4.) Each field must be type C.
Generated data section with specific formatting - DO NOT CHANGE ***
data: begin of record OCCURS 0,
data element: LIF16
        LIFNR_001(016),
data element: BUKRS
        BUKRS_002(004),
data element: KTOKK
        KTOKK_003(004),
data element: ANRED
        ANRED_004(015),
data element: NAME1_GP
        NAME1_005(035),
data element: SORTL
        SORTL_006(010),
data element: NAME2_GP
        NAME2_007(035),
data element: STRAS_GP
        STRAS_008(035),
data element: ORT01_GP
        ORT01_009(035),
data element: ORT02_GP
        ORT02_010(035),
data element: PFORT_GP
        PFORT_011(035),
data element: LAND1_GP
        LAND1_012(003),
data element: SPRAS
        SPRAS_013(002),
      end of record.
End generated data section ***
start-of-selection.
CALL FUNCTION 'WS_UPLOAD'
       EXPORTING
            FILENAME                = P_FILE
            FILETYPE                = 'DAT'
       TABLES
            DATA_TAB                = record
       EXCEPTIONS
            CONVERSION_ERROR        = 1
            FILE_OPEN_ERROR         = 2
            FILE_READ_ERROR         = 3
            INVALID_TYPE            = 4
            NO_BATCH                = 5
            UNKNOWN_ERROR           = 6
            INVALID_TABLE_WIDTH     = 7
            GUI_REFUSE_FILETRANSFER = 8
            CUSTOMER_ERROR          = 9
            OTHERS                  = 10.
IF SY-SUBRC <> 0.
    WRITE:/ 'SY-SUBRC:', SY-SUBRC.
ENDIF.
LOOP AT RECORD.
*perform open_dataset using dataset.
*perform open_group.
*do.
*read dataset dataset into record.
*if sy-subrc <> 0. exit. endif.
perform bdc_dynpro      using 'SAPMF02K' '0105'.
perform bdc_field       using 'BDC_CURSOR'
                              'RF02K-KTOKK'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RF02K-LIFNR'
                              record-LIFNR_001.
perform bdc_field       using 'RF02K-BUKRS'
                              record-BUKRS_002.
perform bdc_field       using 'RF02K-KTOKK'
                              record-KTOKK_003.
perform bdc_dynpro      using 'SAPMF02K' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFA1-SPRAS'.
perform bdc_field       using 'BDC_OKCODE'
                              '=UPDA'.
perform bdc_field       using 'LFA1-ANRED'
                              record-ANRED_004.
perform bdc_field       using 'LFA1-NAME1'
                              record-NAME1_005.
perform bdc_field       using 'LFA1-SORTL'
                              record-SORTL_006.
perform bdc_field       using 'LFA1-NAME2'
                              record-NAME2_007.
perform bdc_field       using 'LFA1-STRAS'
                              record-STRAS_008.
perform bdc_field       using 'LFA1-ORT01'
                              record-ORT01_009.
perform bdc_field       using 'LFA1-ORT02'
                              record-ORT02_010.
perform bdc_field       using 'LFA1-PFORT'
                              record-PFORT_011.
perform bdc_field       using 'LFA1-LAND1'
                              record-LAND1_012.
perform bdc_field       using 'LFA1-SPRAS'
                              record-SPRAS_013.
perform bdc_transaction using 'FK01'.
**enddo.
**perform close_group.
endloop.
**perform close_dataset using dataset.
Thanks in Advance
Rinky123

Hi,
If you are using GUI_UPLOAD in 4.7 then the file path whatever you are using currently it won't work. Replace the file path like this.
P_FILE LIKE RLGRAP-FILENAME.
DATA: V_FILE TYPE STRING.
V_FILE = P_FILE.
Now take this v_file for function module.Then only it will open the file otherwise you won't get unable to open file error message.
I observerd that you are getting so many fields from the file to the internal table.

Error while creating work order from purchase order

Dear All,
We are having a subcontracting scenario where we are creating a Work order from PO but getting the below error.
Error - "No master data assigned to partners-locations-product combination."
Done all the setting mentioned in the below thread but the error still persist.
Error in Generating Work order from Purchase Order
Any suggestions on which master data we need to check?
Thanks,
mahesh.

Hi Mahesh
In the below transaction
/SCA/MFGCFG - Work Order Configuration
Can you maintain Master data Assigment properly
Valid From
Valid To
Active---Checked
Can you please list what you maintained
Regards
Vinod

Error in BDC program for Block vendor in SAP R/3

Hello friends,
I wrote a BDC program to block vendor using FK02.
When I debug the program in <b>No screen</b> mode
the program gives a error 'No batch input data for screen SAPMSSY3 0131.
But the screen name and screen number is not available in the program.
When I execute without debugging in No screen mode, the program works correctly.
When I run in ALL screen mode, the program works correctly and the program does not prompt for SAPMSSY3 0131 screen.
Is there any solution for this problem.

check this
... MODE mode
Effect
The processing mode can take the following values:
'A' Display screen
'E' Display only if an error occurs
'N' Do not display
<b>'P' Do not display; debugging possible</b>
If the MODE addition is omitted, then the processing mode is 'A'.
If a screen is displayed in processing mode 'E' because the system reached the end of the BDC data, the system automatically switches to processing mode 'A'.
If breakpoints are set in a transaction tcod called using the CALL TRANSACTION tcod USING itab variant, these are not actually reached in 'N' mode. The system tries to insert data in the Debugger screen; the call ends with SY-SUBRC = 1001 and the message "Batch input data is not available for screen SAPMSSY3 0131" (S 00 344).
Conversely, in 'P' mode, transaction screens are processed in the background (as in 'N' mode) and debugging is possible.
Regards
Prabhu

BDC program on COGI not working in ECC-need help

Hi,
We are doing a SAP upgrade from 4.6c to ECC. One of the custom tcodes which were using BDC programming on COGI is now broken.Since , COGI is now changed in Ecc 6.0 with respect to the output which is now inALV and the earlier Date funtionaliy button is no more there in ECC6.0.
We are still not to able to find relevant BAPI/function module/alternative for that matter.Rerecording COGI for new environment is not working since it involves alv call functions, which cannot be recorded in BDC.
Please provide any inputs/valuable suggestions for same.

Hello AlbertMarsh,
I've tried, and wasn't able to locate your My Best Buy Member ID with the information you provided to the forums. I'm going to need you to send me a private message by clicking the blue box at the end of my signature with your My Best Buy member ID.
I’m going to add more clarity to enuf's Trade-In post. The 10% bonus is on the total amount prior to the additional 30% promotion. So if you got $10 Trade-In credit and had 30% bonus ($13), you would get $1 additionally from original base value for Gamers Club Unlocked not $1.30. I hope that makes sense.
Blake|Social Media Specialist | Best Buy® Corporate
Private Message

Error in manual batch determination while creating process order

Hi Expert,
Manual batch determination is happening for some of material and for some material it is working firne when creating process order,
Pleae assist
Thanks
Intekhab

Dear,
please open this prd order in change mode CO02 then press tab button cost calculation near release button in order header screen now do not save this order go to edit >log> cost calculation
There it will show the error tht occured during costing
Please refer this thread,
Cost error when saving production oredr
Regards,
R.Brahmankar

Error in BDC program which is creating Work Order IW31

Similar Messages

Maybe you are looking for