Error in Bex Analyzer using SO Microsoft Vista
Hi!
how do you do, well, my coworker has a similar problem than me, so she is working with Vista, she has SAPGUI7.10, installed for Vista, the error is RFC_ERROR_PROGRAM mensaje ENT
Somebody can help us!!!! please!!
Rocio.
Hi ,
Hope this link helps you to find out the solution for your problem.
http://help.sap.com/saphelp_nw04/helpdata/en/dd/b4fa40fe14f623e10000000a155106/content.htm
Regards,
Rahul.
Similar Messages
-
Which macros does BEx Analyzer use? How to call the refresh macro?
Hi everybody,
I would like to get an overview about which macros the BEx Analyzer uses, espacially the macro which is responsible for refreshing the workbook. I want to know what BEX Analyzer is doing when I open the variable screen, I assume there is an SAP macro that opens the variable screen?? I tried to look in the online help at help.sap.com but couldn't find a list of macros.
The idea behind this is, that I have a BEx workbook with 5 queries in it. A colleague now wnats to write a VBA code that calls the variable screen, enters company 1, period and year, runs the workbook and saves it. Then opens the variable screen again, enters company 2, period year, etc etc etc......
What my colleague needs to know is which macro he has to call for the workbook refresh / variable screen in order to make his VBA coding.
Many thanks in advance!!
MichaelWhich version of Bex are you using ? Bex 3.5 or Bex 7 ? This will significantly affect the answer.
For Bex 3.5, here is some useful information;
http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a55f9e09411d2acb90000e829fbfe/frameset.htm
Edited by: Charlie Belt on Jun 7, 2011 9:12 AM -
SAPGUI 7.10 installation, error in BEx Analyzer - Excel interface
Hi!
I have installated SAPGUI 710, and when I want to execute a new report in BexAnalyzer I get this error
"BexAddin
Workbook format .xlsm is supported only from offices Excel 2007version"
The mail issue, is that I have maden all updgrades and package from microsoft from 2003 for using 2007 workbook... i dont know what I can do...
And my coworker, has the similar error, however, she is using offices 2007, and her error is RFC_ERROR_Program, when she wants to execute report... her SO is Vista, in my case is XP.
Somebody, can help us! please!!!!!!!!
BR
Thanks a lotAre U opening the workbook in 3.5 Analyser?
If so then unfortunately Business explorer Analyzer 3.x is not supporting the
new file-format. Please refer to note 1052761.
If you would like to use
new office 2007 file format you need to use Bex Analyzer 7.0.
When using the SAP Default Workbook please set the flag "Use XLS file format" as defined in note
1267924.
The new Excel 2007 file formats require the implementation of
the latest BW Support Package.
If you are interested in workbooks in xlsm format you have to
use at least SP16 and a recent FEP (e.g. FEP801). But it is
not correct that it will work also when you implement the notes on a SP
level which is older then SP15, as then other corrections are missing.
Please check also note 1055581 ... where you find the info that
we recommend to use at least SPS15 (which is BW-SP17). -
Error in Bex Analyzer including the filter button command in Callback macro
Hello,
I have the following problem with the function filter button in the Bex Analyzer included in the callback macro:
Because of using 2 hierarchies in the filter the setting drill down to level 2 in the query gives no right output in the Bex Analyzer. The drill down level 2 is not shown. SAP recommends the include of a filter button to solve this problem. With a filter button in the sheet the problem was solved.
But after including the filter button command in the callback macro I get an error in MS Excel.
The callback macro starts, the filter was set by the user and the data was refreshed. Because of the refreshing of the filter the callback function the callback function starts several times. After setting the filter the first time, the following macro avoids the several starting of the set filter function:
Sub CallBack(ParamArray varname())
On Error GoTo err_handler
Dim lRange As Range
Set lRange = varname(1)
'Filter entfernend/delete filter
Dim ZeichenFilter As Long
ZeichenFilter = Len(Sheet4.Cells(41, 3).Value)
Dim Filter1 As String, Filter2 As String
Filter1 = Left(Sheet4.Cells(28, 3), ZeichenFilter)
Filter2 = Left(Sheet4.Cells(41, 3).Value, ZeichenFilter)
If Filter1 <> Filter2 And Filter2 <> "" Then
onAction = True
onAction = False
End If
'Filter setzen mit einmaligem durchlaufen/set filter and run one time
If onAction = False Then
onAction = True
Call Sheet4.BUTTON_55_Click
onAction = False
End If
exit_handler:
Exit Sub
err_handler:
MsgBox Err.Description, vbOKOnly, "Error in " & " setMusterSub"
Resume exit_handler
End Sub
After the filter was set the callback macro starts the second time. Then the Bex Analyzer erros with the sandglass. The working on VBA is possible, but not the working with Bex Analyer . Values in Excel werent shown.
How can I avoid this error?Once I am adding VAR_VALUE_1 to the static parameters, the system generates two messages error:
Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
System error in program SAPLRRS2 and form GET_SID-1
Best Regards,
Hanit -
Error with BEx Analyzer to open
Hi,
I am facing with this error message with the BEx Analyzer (Office 2007) when trying to open any query.
" A critical program error occured. The program has to close. Please refer to the trace for further information".
The patch level of GUI is 5(SAP GUI Final Release) and patch level of BEx Analyzer Support Package 0, Revision 461.
I really tried many different options from SAP Notes etc, but did not work. Please let me know if there is anyone faced with this situation or anything that I can do?
Reward points will be assigned.Hi Kumar,
The critical program error means the frontend installation is not proper.
You need to check the frontend installation as per note 918394 and ensure that all the dlls are green and the frontend patch is latest.You can use GUI 640 with BI 7.0 frontend.
Which front-end version you are using.The frontend patch level is found in the BEx Analyser -> BEx Tool-Bar
-> yellow question mark -> Help -> About => Version <xx> Patch <xx>
Please goto
-> service.sap.com/patches
->entry by application group
->SAP Frontend Components
->SAP GUI FOR WINDOWS
->SAP GUI FOR WINDOWS 6.40
->SAP GUI FOR WINDOWS 6.40
->Win32
->Apply the latest patch..1600
This should resolve the issue..ensure .net and other prerequisites are installed as per note 877774.
Rgds
Manoj Kumar -
"Critical program error" in BEx Analyzer due to missing BExCompression
Hello. I saw several posts with a "Critical program error" message in new BEx Analyzer 7.0 when try to run query ir workbook, but have not seen any answers to them.
When I look into the trace file BexAnalyzerTrace_<session_id>.txt (attached) in my temp directory, I see following:
System.IO.FileNotFoundException: File or assembly name BExCompression, or one of its dependencies, was not found.
File name: "BExCompression"
at com.sap.bi.et.analyzer.api.BExApplication.DeSerializeApplication(String iString)
at com.sap.bi.et.analyzer.addin.BExExcelApplication..ctor(String iWorkbookName)
But I cannot find any further reference to BExCompression.
Thanks!
VitaliyHi prakash,
we have installed the SAP GUI 7.10 with patch 5 and all the other mandatory components. while working in the query designer for sometime we used to get message " critical program error occured program needs to close" , we still cant figure out what the reason for this. this keep on occuring even if a new session is open.
please advise us what we need to do and if you have any installation guide for this i appreciate if you can share with us.
mail to : [email protected]
thanking you. -
BEx Analyzer: Use Of Variable Values For Planning Sequence
Hi experts,
I want to start a planning sequence using a button item in a BEx Analyzer workbook. The planning sequence itself is defined with several variables, that are input ready. The same variables are used in BEx Queries that are bound to DataProviders in the workbook. Therefore the variables are filled by the user, if the workbook has been started. If the user wants to start the planning sequence, that is defined on the button item, the same variable values (which the user has already set in the beginning) should be used. But I didn't find a way to fill planning sequence variable from variables (like it is possible in the web interface using the DataBinding function). It seems, that it is only possible to set the variable with static values, that are defined in the button item. Am I erring in this point?
Anyone here who can help me regarding this issue?Eitan Ohayon wrote:
Why did you raise this question?,did you face any problem?
Hi Eitan,
The problem was, that the planning sequence worked fine in web but not in analyzer. The system told me in web, that several records had been read, created, changed and deleted. System messages in BEx Analyzer always indicated zero reads, creations, reads and deletions.
Using your idea to set breakpoint in the INIT_EXECUTION method gave me the information, that all variables are not set or set with initial values (like '0000' for fiscal year). This seems to be the reason for my problem. Now I've reduced the planning sequence definition on the button only to that variables, that are really needed. Furthermore I defined the Command Range to get dynamic values for the variables from the excel sheet grid. So it seems to work.
Thank you for your help! -
Error in BEx Analyzer during F4 Value help
Hello Experts,
We are facing a issue where on pressing F4 in Bex Analyzer in variable selection for cost center hierarchy; the operation hangs. I dont get any short dump but following error messages in the analyzer itself
RS_EXCEPTION Message Number 101
Inconsistent Input Parameter (paratmeter: <unknown>, value <unknown>
RSBOLAP Message Number 000
Program error in class SAPMSSY1 method: Uncaught Exception
We are on BI 7.0 SP17. I found a SAP note (1381562) which talks about similar error.
The confusing part is this particular query works fine in Dev, Quality and Test systems but errors out only in production.
Please let me know how relevant is this note. Also let me know if I should be looking at something else to correct this error.
Thanks,
GauravHi,
Please check your text file contains the exact same characteristics and key figures as defined in your planning funciton for your upload (also the sequence has to be the same)
Regards,
Marasa. -
I am getting the following errors when launching BEx analyzer. What do I do to solve this"
Error Group
RFC_ERROR_PROGRAM
Message
SAPLOGON_ID 'BID - Netweaver 7.0 EHP2 BI' not found in saplogon.inicheck if you are to logon to Query designer for the same system and client. I guess you will not be able to correct.
Most probably, entry for the system is missing in the ini file. check if you are able to connect to Bex analyzer on some other system. If yes, copy the INI file from that system to your system.
you should be able to ini file
C drive > Program Files > SAP > Front End
Regards,
Gaurav -
Is there a version of InDesign that I could use on Microsoft Vista?
I would like to use Adobe InDesign to create flyers and other various marketing documents. However, the most recent version is not available for Microsoft Vista. Is there somewhere I could download or trial InDesign that allows me to use it on Vista?
CS6 was supported under Vista. You can download the trials here:
http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html -
Sapbex.xla!toolsEdit error with BEx Analyzer
I get 'sapbex.xla!toolsEdit' error when i try to run BEx Analyzer.
Anybody has faced this problem.
Thanks
ArunArun,
possible that your SAP GUI was not properly installed and also that macros are enabled in the system...
Please give your front end SP levels..
Arun
Hope it helps... -
Hi experts,
When i try to log on to the bex analyzer and try opening a simple query it says "Connection to SAP Gateway failed ".Is there some some settings that I have to maintain in the SAP BIW system to be able to open the any quesry in the Bex Analyzer.Please tell me in detail the path/Tcodes and how do i maintain the settings.
RegardsHi Arnab,
Check is it happening for all users?
Check the auth object S_RFC, do you have this object in your authorization? check the online doc on authorization, to find which values to set for this object.
Hopefully, it might solve your issue.
Regards,
Nataraj.
Sr Consultant-SAP BW, Singapore -
Apple Cinema Display 23" brightness issue while using with Microsoft Vista
Hello there,
I have the following issue and was wondering if someone has an idea what the reason is or what can I do to fix this:
I have a 23" Apple Cinema Display running with a MacPro 2,8 GHz. When I switch to PC using BootCamp 2.1 with Windows Vista Service Pack 1 32bit the screen becomes extremely dark.
At first, on the PC side, the display has the correct brightness but after two seconds it switches to a very low brightness setting.
When I go back to the Mac side the brightness setting on my Cinema Display has changed to the lowest point.
I also have a MacBookPro, with Microsoft XP installed also using BootCamp (I cannot find the version of this Boot Camp, but it is an earlier version) to change to PC. In XP, there is a driver installed that allows me to use a slider on the PC to control the monitor brightness. But with Vista this slider is nonexistent.
I already tried changing the graphic's card NVIDIA 8800 driver to see if I can manipulate the brightness on the monitor. I realized there is brigthness slider on the Nvidia driver, but when you make brighter, the colors just get messed up, and the brightness stays as dark as before.
We have lately upgraded to Snow Leopard and had installed Spyder on the Mac side to create a monitor profile for the Cinema Display. I already deleted the profile to see if there is a change. Nothing. I already went back in time on my PC (Restore Point), also nothing.
Could I download a driver for Vista, so that I have a brightness slider on the PC side, so that I can adequately change the brightness to its correct setting.
It is amazing how the lack of correct brightness in a monitor, can ruin your entire working day! Very frustrating!
It would be greatly appreciated if someone has a solution for this issue! Thanks a lot!
EmilOkay, I came across a thread that implies there is a problem with using the Apple ADC-to-DVI adapter to attach the older "acrylic" 23" Cinema Display to a Mac Pro DVI graphics card. Basically, the workaround is to NOT use the USB part of the adapter (disconnect it).
1) In OS X, set the desired display brightness.
2) Disconnect the USB cable coming from the converter to the Mac.
3) Restart into Windows.
The brightness setting should now remain as it was under OS X.
Confirmed to work on my Mac Pro v1,1 (dual 2.66 Core 2 Duo) with nVidia GeForce 7300 GT video card running Windows 7 x64.
Link here: <http://forums.macrumors.com/showthread.php?t=790910> for credit to resolution.
Of course, you lose the functionality of the 2-port built-in USB hub in the Cinema Display, but an external USB hub can make up for that. -
Errors in BeX Analyzer and Query Designer NW2004S
Hi All, these are the problems -
1) We have installed the FrontEnd and applied SP 1. But when I am trying to
use the Analyzer, the Menu Options are not working. Please give us a
solution to this problem.
2) In Query Designer, when we do drag and drop, the query designer hangs and we need to close the query designer .
3) In Query Designer, if we try to make some changes to an existing query and try to save
we have the following error message -
'Terminate - The system tried to insert a data record, even though a
data record with the same primary key already exists.
Terminate - Program error is class SAPMSSY1 method: UNCAUGHT_EXCEPTION'
Any help will be appreciated.
Best Regards,
RajibHi
The Frontend version is 7.1. So far as I know, only SP 1 is available for version 7.1.
I have got answer for Question 1 - Answer is in SAP Note 1025122.
Still the other questions are unaswered.
Thanks, Rajib -
A licensing error has ocuured when using the Microsoft Expression Ultimate 4
yesterday I install Microsoft Expression Ultimate 4,then I install it .today I installed Microsoft Expression Ultimate 4,open it , it tells me "a licensing error has ocuured",then close ,why???
Honestly, I believe that this is an example of Trustworthy Computing where Microsoft has remove support for this application which may also include the licensing server which I am sure is or it has at one point been in use. Hence, anyone using that
program automatically shuts down the application.
I believe without Trustworthy Computing, we would be able to run the application in any case without closing upon downloading the validation code for your computer.
I think that Microsoft should repair the unsupported application at least to close in an open file state so that users who like to use expression studio can.
Deborah Willis-PhD
Maybe you are looking for
-
KM Scheduler is making server to go down
Hi All, We have a KM scheduler running in portal for syncronization of roles between portal and backend. But when there is mass upload of users happening in backend,the scheduler is occupying lots of memory and the server is going down.The problem is
-
Handling requests with a single JSP
Is it possible to route all requests in a given folder to one JSP? I'd like requests like: /calendar/Home.ics to go to /calendar/index.jsp I know I can do this with a Servlet, but I'm trying to run an application-wide bean when someone calls one of t
-
Oracle E-business suite database migrate from AIX to Linux
Oracle 11i application database migration from single Aix instance to oracle Linux cluster RAC. What is the easy way to migrate? Migrate single instance from aix to linux cluster. OR Migrate single instance from aix to linux cluster RAC. We have inst
-
Hi Everyone, I am trying to print a custom report on specific printers for different users using the Assign Documents to printers functionality. I have assigned the document at user level to specific printers. The records have been enabled and a defa
-
Cisco IPICS 4.5(1) audio issue
Hello, After Cisco IPICS implementation, this work around 15 days. After that, our customer experienced an issue with the audio. I'll try to explain the behavior. When a user uses a Cisco IP Phone Service (on IP Phone 6921 & 7945) to communicate with