Error in BIC MODULE BIC MODULE modules: trigger file [not specified] conta
Hello, i have a problem with the BIC Seeburger MD
Scenario overview:
IDoc Invoice02 => Message Mapping (Seeburger content) => FTP Seeburger Comm. Canal integrated with BIC adapter. This works correctly. Then I tested the field mapping and the BIC Adapter brings no more errors in field mapping.
BUT NOW THIS ERROR MESSAGE IS:
Error in BICMODULE modules: Temporary error: BIC XI Adapter call failed. Reason: Error: [Error: ID = 1104; LEVEL = 3] trigger file [not specified] contains no valid trigger. DESCRIPTION: You have specified no valid trigger for that mapping. Please change this within BIC Mapping Designer.
Destination Message is the Edifact Invoic D96A
I hope one of you can help me
Kind regards
Tobias
Hi Tobias,
there is a either a problem with your XML Message or with the BIC Mapping which converts XML to EDI.
What's the name of the BIC-Mapping that you use in your FTP Module chain?
You can also check the following to make sure, your BIC Mapping works correctly:
a) Take your Invoice Idoc and convert it with the Message Mapping into Edifact-XML
b) Use BIC Mapping Designer and open the Mapping that you use in the Module Chain (Should be XML-->Edifact)
c) Take the Edifact-XML Message from your PI Message Mapping and convert it in the Test Environment of BIC Maping Designer.
If you get the same error, there's something wrong with your Edifact-XML message
If the mapping works, there's something wrong in your module configuration. (Maybe you can post your module configuration)
regards,
Daniel
Similar Messages
-
I have lightroom 5.7 and a macbook pro 10.9.5. Occasionally when I am editing a photo in the develop module, I suddenly get a "file not found" message and the editing ceases to work. There is no "exclamation" icon below the histogram box in the Library module or on the photo in grid view, and the histogram is gone. What is going on? Trying to find it using the "find missing photos" in the library menu does nothing.
-
my computer deleted all of my songs off my ipod one time with i unplugged it, i think i unplugged it too soon and it wasn't finished ejecting. now every time i plug it in it gives me an error saying "the ipod 'Skye' cannot be synced, a duplicate file name was specified." It wont let me put any songs on my ipod now.
Never mind. I found out how to fix the problem
- Go to "Computer"
- Right click on your IPod icon
- Click "Properties"
- Go to the "Tools" tab
- Under "Error -checking" cilck the "Check now..." button
After doing all of that, ITunes now works like normal for me. -
I really want my firefox back. But everytime i try to download the newest and oldest firefox installer and run it, it reaches 100% then an error pop up 7-zip appears and says "the system cannot find the file specified." I tried to run it as administrator and putting it on desktop but it didn't help.
Please someone tell me what to do to install my firefox again.Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you! -
Tried Most Everything... Error Type of file not supported... codec not installed
Hi Friends: I have been battling with the error message of ... "Type of file not support or codec not installed." I have been throughout the forums searching for answers and attempting various suggestions. I am stumped and am reaching out for some wisdom and help.
1.) System Gateway – T-6859u, Intel Core 2 Duo T6400 2Ghz, 4 Gig ram, Problem has existed on both Vista and upgraded Windows 7. I have used Premiere since Premier 5 (Full version not elements) including versions 6 and PRO. I have Elements on my laptop for convenience.
2.) Assets- Problem exists with all AVI files. This includes files that worked previously but will no longer be recognized. I have used Elements since version 7 was new. It is only the last 4 months this has been and issue. These are AVIs that previously working in Elements 7 from Panasonic DV camera and other DV sources.
3.) Problem first appeared when Windows Update installed security patch KB975560. Once the Security patch installed Premiere quit running AVIs. When the patch was removed Premiere worked again. However, windows update continued to reload the patch. The patch has now been removed and prevented from reloading. However, the problem now persists.
4.) Other attempted repairs. Reloading Premiere Elements 7, Upgrading to Windows 7, Removing and reinstalling K-Lite Codec packs inc standard and 64bit. Loading LEADTOOLS. None has repaired the problem All the AVI files playback fine in other programs including Windows Movie Maker, Media Player Classic, WM player etc.
I'm not sure what to do next. I have been a dedicated Premiere user for so many years, I don't want to switch to another program. Any suggestions friends?
DrMark1105Welcome to the forum.
What version of Apple's QT Player do you have installed?
PrE relies on this much more than its big-brother, PrPro, until CS5.
From my experience, QT 7.5.5 was my "last known good," and some problems have been reported with the 7.6.2 and 7.6.3 versions. 7.6.6 is out, and works well for many Adobe users.
I would investigate updating QT Player.
Also, FFDShow, an element in K-Lite has been death to PrPro for many people. Just having it installed brings PrPro to its knees.
Though Adobe hides its CODEC's pretty well, K-Lite has been known to shift the priority of the Adobe MainConcept CODEC's. While it does not overwrite them, or delete them, it sets up some of its CODEC's to take priority. There are some older threads on Registry editing and utilities to reset the priority of the Adobe MainConcept CODEC's. Seems that Robert Johnson participated in those discussions and may have furnished the link to at least one utility.
Those are all the thoughts that I have now, and none might be of use.
Good luck,
Hunt
PS - Robert has not been around here lately, but does spend time on the Muvipix Community forum. I'd post there in the PrE 7 forum, and ask if anyone has any ideas too. -
File Not Found / Fade Update Failed Error -43
I have been getting two errors all of a sudden when instigating playback in the Arrange window in Logic 9.
File Not Found Result Code -43
and
Fade Update Field Error -43
I have googled information on this and have tried the following:
Used "Save As" and changed the name of the project file
Removed automation at the start of 3 tracks where i have automated in a gradual increase in volume
Gone to the Audio menu and selected "Delete Fade Files"
None of the above have worked. I have not used the crossfade tool to add a fade to the start or end of a track, i have only created a fade effect by using Volume Automation.
There seems to be other people having the same problem but i haven't found any with the -43 error code.
Does anyone know what that code relates to?
Have you any suggestions as to how i can get rid of this error?
ThanksI recently had issues with a "File Not Found" error, though it was a different code #. (-61, or something similar.)
I was trying to move a track from my old G4 and work on it on my Macbook Pro laptop.
The problem turned out to be related to file permissions.
Logic is not a network-friendly program, and OS X is hyper sensitive to permissions, so to access a file that was originally stored on another computer, I had to do two things:
"Get Info" for the drive (it was not a system drive) that the original file was stored on, and check the box at the bottom:
"Ignore Permissions on This Volume"
From the user account on that computer, I then copied the file from the internal drive to an external firewire drive which also had "Ignore Permissions" checked off in the "Get Info" window.
I could then access the file from my user account on the laptop.
Once I did those steps, the "File Not Found" error no longer appeared. -
Have upgraded my iPad to an iPad 2. When synchronizing with my iPhoto Library (8500 photos) on my MacBook I get an error message saying "...cannot synchronize. File not found" (transalted from swedish). It works well with my iPad. I restored the iPad2 tand began from scratch but the problem reocurred.
i have similar problem too. it seems the problem is from iphoto 08.
i have two ipad 2-
ipad A:
new ipad with new sync with 6 photo album with iphoto, error occurred.
restored iOS to 4.3.3, problem still exist.
ipad B:
synced 6 photo album with iphoto no problem for a long time.
tried to de-select album 1 and synced, no problem...
then re-select album 1 and synced, error message occurred.
my solution:
copy album 1's photo to desktop, then copy the desktop photo back to iphoto album folder...after that, i can sync back album 1 to my ipad.
i have no idea why iphoto has such problem on some of my photo albums =(
Do anyone have a more clever solution? -
When I run the labview it returns error 7 and says the possible reason is file not found or moved. from my understanding it is not locating the built in VI's like GPIB write, Read, Write to spreadsheet. Everything was running fine until I converted a file that i coded in labview 9 on my laptop to open it into labview 8.5 on my work desktop. How do I fix this problem?
Both machine are showing the same problem. I even completely deleted the file from the machine and copied one that I had on my backup drive. But still the same problem. I can see those function in the palette however, now when i run anything it shows the same problem. i even tried by running a simple vi that i instantly wrote but the problem still persists. I havenot tried doing the repair because the labview installation files reside on the college network and I dont have access to those right now. To be precise the the message dispalyed is:
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
=========================
NI-488: Nonexistent GPIB interface. -
BIC Module Error in Sender Communication channel for EDI to File scenario.
Hi Experts,
We are working on the EDI based scenarion where EDI files come to SAP PI from partner and then through Split 997 Adapter Func Ack is sent back to the Partner . But we are facing a issue in our sender Communication Channel which is a File Adapter Channel and uses BIC Module for the conversion of EDI to XML .Request if any one can provide any guidance on the below issue coming in sender CC.
Error: Error in BICMODULE-module:Temporary error: BIC XI Adapter call failed. Reason: 2 errors occured. First error: EdiSegmentData read(): Edifact Format not correct : segment must end with \"segment delimiter\" (Segment : ISA). DESCRIPTION: EdiSegmentData Error: Your Edifact Format is incorrect the segment must end with \"segment delimiter\". check segment [not specified]. Last error: InhouseDocReader moveNext(): com.seeburger.jucon.dochandler.AnsiX12DocReader, offset[92(read Segment : ISA)]: could not parse segment (wrong format): EdiSegmentData: Edifact Format not correct : segment must end with "segment delimiter" (Segment : ISA) DESCRIPTION: InhouseDocReader Error: [not specified] at position [not specified] could not parse the segment [not specified] Error while reading description - wrong format.
Thanks & Regards,
AbhishekHi Abhishek,
Is there any special character present in the EDI file?
the parser is not able to parse the data.
you can check the BIC conversion log for more information.
Regards,
Harish -
Error while calling the Mapping function module for BW Extraction
Hi
iam getting runtime error while calling the BW mapping function
The error description is as shown below.
Runtime Errors CALL_FUNCTION_UC_STRUCT
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
<b>Short text</b>
Type conflict during structure parameter transfer at CALL FUNCTION.
<b>What happened?</b>
Error in the ABAP Application Program
The current ABAP program "GP466CV1Y7W2VML1PJ3VB80KDOP" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
<b>Error analysis</b>
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
not caught in
procedure "CALL_MAPPING_FUNCTION" "(FORM)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
In the function "CMS_CB_BW_MAP", the STRUCTURE parameter "EXTRACT_DATA" is
typed in such a way
that only actual parameters are allowed, which are compatible in Unicode
with respect to the fragment view. However, the specified actual
parameter " " has an incompatible fragment view.
I am passing the EXTRACT_DATA parameter as specification LIKE with the associated type - corresponding structure
Please let me know how can i resolve this issue
Regards
LeonDear benarji ,
I'm having the same problem help me to correct . I have mentioned below as what error i got.
Runtime Errors CALL_FUNCTION_UC_STRUCT
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
Short text
Type conflict during structure parameter transfer at CALL FUNCTION.
What happened?
Error in the ABAP Application Program
The current ABAP program "ZDLROUTSTANDING_COPY" had to be terminated because it
has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
not caught in
procedure "PDF" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
In the function "/1BCDWB/SF00000080", the STRUCTURE parameter "IT_WORKS_SF" is
typed in such a way
that only actual parameters are allowed, which are compatible in Unicode
with respect to the fragment view. However, the specified actual
parameter "SFTWORKS" has an incompatible fragment view.
Missing RAISING Clause in Interface
Program ZDLROUTSTANDING_COPY
Include ZDLROUTSTANDING_COPY
Row 876
Module type (FORM)
Module Name PDF
Trigger Location of Exception
Program ZDLROUTSTANDING_COPY
Include ZDLROUTSTANDING_COPY
Row 894
Module type (FORM)
Module Name PDF
Source Code Extract
Line SourceCde
864 ** i_logo = 'ENJOYSAP_LOGO'
865 * IT_LIST_COMMENTARY = I_LIST_COMMENTS1.
866
867 ENDFORM. "alv_top_of_page1
868 *&---------------------------------------------------------------------*
869 *& Form PDF
870 *&---------------------------------------------------------------------*
871 * text
872 *----------------------------------------------------------------------*
873 * --> p1 text
874 * <-- p2 text
875 *----------------------------------------------------------------------*
876 FORM pdf .
877
878 * *** Smartforms & PDF ***
879
880 ssfctrlop-no_dialog = 'X'.
881 ssfctrlop-preview = 'X'.
882 ssfctrlop-getotf = 'X'.
883 ssfcompop-tddest = 'ERP7'.
884 DATA : mcheck LIKE sy-subrc.
885 CLEAR : fm_name.
886
887 "Get Function module name for given smartform
888 CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
889 EXPORTING
890 formname = 'ZSFDLOS1'
891 IMPORTING
892 fm_name = fm_name.
893
>>>> CALL FUNCTION fm_name
895 EXPORTING
896 control_parameters = ssfctrlop
897 output_options = ssfcompop
898 mrefno = mrefno
899 * P_TITLE = MTITLE
900 IMPORTING
901 document_output_info = st_document_output_info
902 job_output_info = st_job_output_info " IT_OTF_DATA
903 job_output_options = st_job_output_options
904 TABLES
905 it_works_sf = sftworks
906 EXCEPTIONS
907 formatting_error = 1
908 internal_error = 2
909 send_error = 3
910 user_canceled = 4
911 OTHERS = 5.
912
913 IF sy-subrc NE 0.
Advance Thanks -
Another "An error occurred when attempting to change modules" error
Hello all:
After using Adobe Photoshop Lightroom on Mac OSX trouble free for the past 6 months, I opened up Lightroom today and received the following error: "An error occurred when attempting to change modules." I had not made any changes in between when it worked normally and when the error started to occur. I beleive the last thing I did before this error occurred was to go into the Print Module.
Other information--I keep all my RAW .NEF files on an external Firewire (800) 750 GB drive. This is on Mac OS X 10.5 running Adobe Photoshop Lightroom 1.3 and also with 1.4.1. I'm running an iMac 20" with dual-core 2.2 Ghz Intel processors and 4 GB of RAM. I have around 25k images total.
When I noticed this problem, I was on Lightroom 1.3. I immediately upgraded to 1.4.1, which did not solve the problem. I have also tried many suggestions in the forums including uninstalling the application and removing the .plist file.
I thought I had come up with a solution by creating a new catalog, then importing the former into it. While this seems to work immediately after the import process, as soon as I close it, the problem manifests itself again.
More details that may or (likely) may not help:
- Going to the Develop and Print Modules gives me no problems. However, when I click on Library, Slideshow, or Web, I see the error.
- I upgraded my Mac to the latest patch level after observing this error to no avail.
So it looks like my choices are to create a new file and reimport every single time, or lose all of the work I've done for the past 6 months on thousands of images.
Can anyone please help???? I promise to post the solution when we fix this darn thing so others may benefit. I'd be happy to run through any troubleshooting that y'all would suggest outside of switching to a Canon.
Thanks!!!!
MattI'd first check for the existence of a file ending in .lock, which should be present when LR is in use, but if it exists when LR is quit, it can cause problems, and should be deleted.
Please post back your results. -
I have Lightroom 5 installed on my iMac which I downloaded (uploaded?) to my MacBook Air (via wi-fi) but unlike the iMac, I'm unable to use the program on the MacBook Air. When I open the program on the iMac and click 'file', (as people using the program would know) there are 21 options - import pics, export, etc, etc - however, in the version on the MacBook Air, opening 'file' gives me four options - New Catalogue, Open Catalogue, Page Setup and Printer - and with that comes the pop-up message "An error occurred when attempting to change modules". Any ideas please?
A forum thread from 3 years ago talking about LR 1.x which had this problem seems to need permissions fixed or new folders created with the corrected permissions. You might try doing a repair permissions for your user and/or run LR as an administrator user. I am a PC person so cannot tell you exactly how to do that.
https://forums.adobe.com/message/1457020 -
Hi, I've got Creative Cloud, on a Mac Pro late 2010, 6 Core, 3.3 Gz, which has just been emptied and re-set with Yosemite. I've downloaded the Adobe stuff I need, especially Ps, Il, Id, Pp, Ae and Lightroom 5. Everything works find except Lightroom which doesn't open, giving me this message each time: "There has been an error during the modification of the modules." There is no error number attached and the program freezes. I've got a deadline which has been broken because I can't finish the work I've started in Lightroom 5 on my old computer which I deactivated in order to run the new one. Now I don't know what to do nor where to look for the problem. I've placed the Lightroom Library on an external LaCie 4Big 8Tb Raid 5.
Error changing modules | Lightroom
-
HELP! Downloaded LR5 and when open it shows an error message saying error while trying to change from modules and I can not even import photos. Am I doing something wrong?
I have the same problem, and the solutions in Error changing modules | Lightroom do not work. Even uninstalling and reinstalling a new copy did not solve the problem. As anyone got an idea what other lingering files might be causing the problem?
-
Error while determining the form function module
Hi everyone,
We are experiencing problems while displaying one adobe form in ESS. Its the Travel Expense form (PTRV_EXPENSE_FORM). When pressing the button to Display/Print the form we get an error message: "Error while determining the form function module", and no form I shown. The ADS server is configured correctly and there are other forms that are actually working, for example the Travel Request form. We are running WAS 7.0 with SP12.
Anyone has an idea what can cause the problem? Any help is greatly appreciated.
Thanks in advance!
Regards,
SophieViktor,
Thank you for your answer, it solved our problem!
Regards,
Sophie
Maybe you are looking for
-
Hi ive just purchased an IMac and encountered an issue i didnt think of put hopefully someone can help? Ive a apple account and also the wife both with seperate itunes accounts etc. Is it possible to have two profiles with seperate accounts on our sy
-
Pricing after change of delivery date in sales order
Hi, When i change delivery date in a sales order prices are not recalculated automatically . I want the prices to be calculated automatically . thank you. Ashok
-
Hi , I want to call HTTP link from ABAP. On initial research , I found that I can do the task in 2 ways:--- 1. by using class cl_http_client, 2. by using program RSHTTP20 . Is it the correct information I got. Out of the 2 methods, which method can I
-
Need info about Soundfont latenc
I?m thinking about Soundfont as sampler, if I?m correct the samples a loaded on the system RAM. Can?t be use the ROM to load the samples?, what latency can get with Soundfonts? I have seen that the PCMCIA card has latency problems on Soundfonts, what
-
Getting Mocha VNC light to work
The app sounds amazing according to reviewers, and several said it was very easy to set up. However, I haven't been having an easy time setting up the app to work on my computer, can some one help me please?