Error in Biller Direct

Hi All,
I am getting following error in biller direct after log in.
"Your user master has not been created correctly. Contact your system administrator."
My observation In the ECC side is:
In RFC RFC EBPP_GET_ACTIVITI
I_PARTNER-PARTNERTYPE
and
I_PARTNER-PARTNERKEY
is blank.
Thanks in advance.
Raktim

Hi Eli,
Thanks for your answer.
I have checked. This note is not applicable for us. We are in ECC 6.0.
In the code it is using following logic:
FI uses only 14 characters - cocd(4) + account(10)
objectkey-cocd = L_objkey+0(4). "C101
objectkey-account = L_objkey+4(10). "2
Then it is firing the follwoing SQL
SELECT SINGLE * FROM LFB1
WHERE LIFNR = objectkey-account
AND BUKRS = objectkey-cocd.
I am not using vendor but customer. Again it has its own logic for company code.
Thanks
Raktim

Similar Messages

Connection Management Error in Biller Direct Application

Hi Experts,
We are in the process of implementing Biller Direct Solution for the Suppliers/Vendor!
All the XCM Settings , Backend Settings , Portal Settings have been in place and we were able to run the application without any difficulties but all of a sudden now , when we run the Biller Direct Application , an error appears which says "Error" (Thats it) .
In NWA , i get the below errors but not sure what can be the issue or how can i resolve it. I am sure it relates to Connection Management Pool but not sure what settings does it requires.
Errors in NWA:
1) The Standard Pool Connection BillerDirect_#bd" for language "EN" could not be created. There is an existing connection with this name.
2) Recurring Error in the initialization of the application "ConnectionManager.initdefaultpool failed
3) Could not create Connection Manager Scenario-Biller Direct
4) Java Exception "java.lang.NullPointerException has occurred". Check the trace for location "com.sap.fin.webbase.taglib.LogExceptionTag"
Much appreciate the Prompt Responses , Thanks!
Just to highlight , I have reverted all my code modifications and now have deployed the original .sca , Still have the same Error

hi,
Check your XCM connection settings...Goto your custom xcm configuration page and check if pool details are mentioned properly.
Also, check this link for help - http://scn.sap.com/thread/1881735
cheers,
sen

Biller Direct Agent Mode error

I am currently trying to setup Biller Direct to show the Agent Mode. Below are the steps i haven taken:
1. Changed the XCM mode settings to Agent Mode: epbbmode = OA
2. Rebooted the Java Instance
2. Added the security to SAP User ID - We have giving the user all authorizations for Biller Direct
3. The user logs in to through the standard Biller Direct Login page and they are logged in successfully
4. The user is then displayed the standard "You have successfully logged on Select your account" page.
5. When the user selects one of the accounts listed on the page, they receive the following error message, "The service is not available at the moment. Try again later"
Has any successfully launched the agent mode for Biller Direct. If you have could you please help us determine why we are receiving this error message after logging in.
We were able to successfully use the Standard and Caller Center Search Modes for Biller Direct.
Thanks

Hallo
1) someone wiser than I please correct me but I believe you do not need to restart the java engine after XCM changes nor Visual Admin changes but you do after UME changes.
2) "The service is not available at the moment" is a general error message kept simple to not worry the user. If you go into NW Admin and set the level of logging to "debug" then you see real messages and can diagnose, perhaps in conjunction with ST01 on R3.
3) I did set OA and accessed my customers.
I am on BD 6.00 and NW 7.00 SP18
Best wishes

SAP Biller Direct PDF Retrieval Error

Hi All,
We are getting error while opening PDF on Biller Direct portal. The error comes in pop-up as follows->
Adobe Reader could not open "XXX.pdf" because it is either not a supported file type or because the file has been damaged or wasn't correctly decoded.
The original PDF document is stored in FileNet server and we are using a ABAP Function module GEN_EBPP_GET_INVOIVE_DETAIL to retrieve the PDF content from FileNet server and display it in Biller Direct application.
Note: The same PDF is getting opened from ABAP.
Pls let me know if there is any settings to be done in either ABAP side or in Visual Admin. I've checked VA entries in HTTP Provider and it is set MIME type as {.pdf,application/pdf}.
Is there any other information that i'm missing here. Pls give me a hint.Thanks in advance.
Thanks, Venkat

Hi
I also get something similar which I need to solve.
When going to biller direct via a url like http://<host>:<port>/bd/public/frameset_top_html.jsp?ebppMode=S I see my pdf icon next to the open bill in the open bills list and clicking the icon displays my pdf correctly.
When going via a portal and clicking the same icon for the same invoice I get the same first popup asking if I want to open the pdf file (as in the case above with the same identifier name for the pdf file) but this time when I click Open then Adobe Reader opens a window with the message "There was an error opening this document. This file cannot be found."
Thus the portal connection cannot find the existing pdf file.
DL

Biller Direct Error "We regret the service is not currently available"

Hi,
We have installed Biller Direct software (604 SP10) on our Java server (701 SP8) and it is connected to R/3 backend system (702 SP5). After Biller Direct software installation, we ran the following steps
1. Login to biller direct url
2. Leave blank in all fields (Customer No, Name and City) then click Find Customer
3. It lists few customers list, then when we click any of description for CustomerNo it displayed the following error.
"We regret the service is not currently available. Please try again later."
In the default traces we have seen the following error details:
#1.#1E99367F6302001B00000000000DF0D20004B38BAD09A298#1323312391758#com.sap.fin.webbase.framework.RequestProcessor#sap.com/fscm~bd#com.sap.fin.webbase.framework.RequestProcessor.processRequest#USER1#10588##n/a##775189f4214611e193e400000053dbc6#SAPEngine_Application_Thread[impl:3]_15##0#0#Error##Java###No screen-name mapped! path= ;result=#2#/startEBPP#customerSearch#
Could some one please advise what could be issue? Please let me know how to fix the issue, if you already went through the above error.
Thanks in advance.
Regads
Sri

Hi Sri
Please logoff the system and restart the system again and then check.Also check what is the CRM package that you are using.Check wheather CRM 4.0 60.2.3 package is there or not.
The following tables should be configured,or you will get this sort of errors.This configuration should be done in the backend by FI
-> BCONTCD
-> BCONTT
-> BCONTA
-> TFKEBP
Regards
Srinaath

What is the meaning of the following Biller Direct Error messages?

We have just installed the Biller Direct application in our QA box and after doing all the necessary set-ups (Simmilar to our working model in Dev). We are geting the following error message when we select a Customer to pull up the line items to be paid. What is causing this error?
Error Message - We regret the service is not currently available. Please try again later.
Sample Trace file error messages-
RequestProcessor.processRequest#JGITAU#38430##n/a##14500a43108e11e1981600000053d bc6#SAPEngine_Application_Thread[impl:3]_36##0#0#Error##Java###No screen-name ma pped! path= ;result=#2#/startEBPP#customerSearch#
#1.#1E99367F6302001F0000003E000DE0580004B1DFC4CF3772#1321474544580#com.sap.fin.w ebbase.framework.RequestProcessor#sap.com/fscm~bd#com.sap.fin.webbase.framework.
Your help will be appreciated.
Regards,
John

Error -3150, normally mean there is no Internet connection or the connection is erratic and keeps dropping.
So you are in the wrong forum, I think iTunes forum would be more helpful.
Here is the support link for home-sharing, go through it step by step.
http://support.apple.com/kb/TS2972
Good Luck!

Biller Direct sporadically not posting Credit Card Payments to the backend

Hope someone has experience this issue before. While we are part of the Public Sector - Higher Ed group, I believe others may have experience this issue. I have spoken with the other Higher Ed customers and we have all experienced this, some more than others. We have students who are trying to pay by Credit Card on Biller Direct. While their payment is validated and their Credit Card debited the payment does not feed to the ERP FICA system. This can happen to one student and a second later another student can pay successfully then the student in error tries again and it does not work. Some of these student have a lock that has been released. We can post the payment successfully using Cash Desk at the same time the student can not post through Biller Direct. Any help is appreciated.

Hi,
Have a look to below blog, it is regarding e-payment, but you can refer this for your approach.
/people/aashish.sinha/blog/2011/02/24/e-payment-a-customized-solution-other-than-sap-integration-package-swift-150-part-1
Regards
Aashish Sinha

Biller Direct: Incomplete Customizing

Hi guruz,
I'm trying to configure the connection between biller direct and FI-CA using UME as repository for the users. I made all the steps described in the configuration guide but I still have an issue that I can't understand. Here is the exception:
#1.5 #0016E67877AE0072000001340000203400043AF2500118A9#1190712305664#com.sap.fin.webbase.ConnectionManager#sap.com/com.sap.isu.ebpp#com.sap.fin.webbase.ConnectionManager.executeFunction#zwebmaster#42098##septest.ae45ew.it_EPD_5459050#zwebmaster#2acf85206b4911dcc2110016e67877ae#SAPEngine_Application_Thread[impl:3]_39##0#0#Error#1#/Applications/Common/Infrastructure#Java#logmsg.cm.executing.err#com.sap.fin.fscmbase.resources.system#When you executed function "" an internal error occurred. You can find additional information in the trace file under location com.sap.fin.webbase.ConnectionManager. See also SAP Note 787373.#1#GEN_EBPP_CUSTOMER_INIT#
#1.5 #0016E67877AE0072000001350000203400043AF250011E88#1190712305664#com.sap.fin.webbase.ConnectionManager#sap.com/com.sap.isu.ebpp#com.sap.fin.webbase.ConnectionManager.executeFunction#zwebmaster#42098##septest.ae45ew.it_EPD_5459050#zwebmaster#2acf85206b4911dcc2110016e67877ae#SAPEngine_Application_Thread[impl:3]_39##0#0#Error##Java###Executing function failed: #2#GEN_EBPP_CUSTOMER_INIT#com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Biller Direct: Incomplete Customizing
It refers to an RFC exception during a Jco Connection and says that the customizing of biller direct is incomplete but I'm not able to understand where do I have to setup this rfc connection..
Can you help me?
Thank you
Mattia

Hi Mattia - We are facing the same issue and error message is exactly same.
I would appreciate if you can post the resolution.
Thanks,
Suhas

Biller Direct and CRM billing

Dear Experts,
Could anyone kindly help to tell me how to deploy Biller Direct? If my company has the license of FSCM, does it mean Biller Direct has been deployed already?
Also, I want to make fully use of CRM billing function. I have seen a demo of biller Direct usage on ISA website, any expert knows how biller direct and CRM billing can interact with each other?
Thanks

Williams,
We are also getting the same error, could you please share the fix.
Rao.

Biller Direct Issue BP not released

We have performed the configuartion for Biller Direct.
When we log on we get the following error message
You are not authorized to execute this function, as your business partner has not released it for you.
Has anyone seen this before, if so how do you resolve this.
We have given the user in R/3 access to all FSCM delivered roles.

Hi Nrisimhanadh,
Can you please confirm whether you had performed following steps.
1) for the SC FSCM_BD, you had defined it's build-time dependencies in SLD.
2) After that you have updated the CMS.
3) Then, you added the FSCM_BD to your Track and Saved the Track. And while saving the track you had chosen "Save & Reimport" options.
4) Make sure you have placed the FSCM_BD sca into CMS/inbox folder at OS level.
5) Then, from the CMS Transport Studio you had you had checked-In those Components from Check-In Tab.
6) And then, imported the Components into Development and Consolidation Tabs.
7) Now, if you import the Track configuration into your developer studio, it must bring all your Build time dependecies as well all ther DCs that you need to modify.
If you have missed any of the above mentioned steps, then correct it.
One more input, also check whether the Developer ID that you are working with has the "NWDI.Developer" UME role assigned to it.
Let me know about your findings.
Regards,
Shreyas Pandya

EP 6.0 and Biller Direct

We will be implementing Biller Direct soon and want to provide it via an Enterprise Portal that uses SSO.
Has anyone done this yet? If so, did you have BD open in a new browser window, or is it part of your portal user interface?
What is the name of the Biller Direct component to call in an iView?
Thanks,
Donna Maupin

Hi Maik,
I am facing an issue with SAP Biller Direct. We made the initial setting through Extended Configuration Management (XCM) wherein we created a new Customer in Application Settings. We made some Application settings and Connection Manager settings. Once we try logging into the Biller direct application using our Host http://HostName:port/bdisu we are prompted with Login Id and password. We tried logging in using the default userid which was provided during Biller Direct Installation but we are getting the error "A general problem has occurred within the logon. The error message is: ".
Please provide us some thoughts on how to rectify this error. Let us know if we need to make some User Management Configs. Also any documentation of how to implement UCES would be very helpful.
Thanks,
Yuvaraj.

Biller Direct Integration with FI-CA

Hi everyone,
I have a problem with the integration with biller direct. The connection test says that everything is okay. But when I'm trying to logon the following message appears:
"A general problem has occurred within the logon. The error message is: . "
Any ideas how to solve this problem?
I think the XCM configuration is okay. The connection between the application and the SAP system is okay as well. I already made some customizing in FI-CA. Is there something I missed?
Regards,
Rainer

I created an example user in the sap system ECC 6.0 linked with an business partner (Object1006). So the user data are stored in the backend (FI-CA).
With FI-AR I had no problems, it works fine. So it seems that there is really a customizing or something missing in FI-CA.
Edited by: Rainer on Jul 30, 2008 9:27 AM

Getting blank invoice pdf in Biller direct

Hi,
We are using Biller Direct functionality just to view open and paid invoices.For some invoices if we try to open the PDF we are getting blank PDF.I checked in Lof files I discovered below error.
PDF download error. Could not find EOF in document GL1048098092008088301SD 0094646471
Can you please comment!
Regards
Imran

Hi Imran,
Did you get the solution of that? Please share.
Regards,
Simar

Biller direct confi

hi experts,
I am trying to confi UCES ,for tht I have configured all the basic settin in background in ISU. Its runnin fine in background but when i try to pull the data in Biller direct(UCES),its throughing error : <b>Company Code not defined</b>.
Can any body help.
Regards
Arvind

Hi Arvind,
Pls look at Note 1092023.

XCM Biller Direct url issue

Hi,
The following error will occured while opening the biller direct url.
"Internal system Error (connection manager lost ), contact your system administrator .
Even though configured the settings in XCM, getting above error.
How to overcome this ?
Best Regards
Srikanth

Hi , Thanks for your reply,
Applied latest SCA file from market place but problem still persists , giving error message
"correct the XCM configuration".
Configure the xcm settings correctly but still getting same error message "correct xcm settings"
Thanks
Srikanth

Error in Biller Direct

Similar Messages

Maybe you are looking for