Error in BO Webi using Authorization analysis in Bex with hierarchy display

Hi Experts ,
When we run the WEBI report created on bex query which has 0comp_code restricted with characteristic variable  of processing type Authorization and Not ready for input.
The hierarchy display is active in Bex (as we want to see L01, L02.... in webi)
The authorization analysis is working perfectly when I test in Bex analyser (at any drill down level).
But in BO webi, I get below error
The database error text is: The supplied XML is not valid. [char name & Level].
I dont get this error when I deactivate hierarchy display in Bex.
Also I dont get this error for user ids having 0BI_ALL
Please help me to resolve this.
Thanks
Savio

Hi Atul,
You can achieve this by dragging these two fields in the filter bar section of the webi. then apply variables on these fields.
hope it helps
Regards,
Rathy

Similar Messages

  • I can no longer shoot directly into phaseone software since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?

    i can no longer shoot directly into phaseone software - neihter version 6 or 7 - since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?

    My eyes just glazed over...Please in the future break down each of your issues with paragraphs separated by two carriage returns. It would be much easier when trying to address your issues.
    Go to Apple menu -> System Preferences -> Keyboard and Mouse -> Mouse
    And edit your mouse settings to do what you want it to do.
    Secondly, this is not the place to vent. If you have a complaint, there is:
    http://www.apple.com/feedback/
    or http://www.apple.com/contact/
    We are just end users here helping other end users.
    Third, from my understanding, it would appear you are concerned about the noise the hard drive makes when it falls asleep? Why not put your machine in screen saver mode instead? Apple menu -> System Preferences -> Energy Saver turn off all Energy Saver settings, or set them to run Never.
    Fourth, if your machine was purchased just a few days ago, you may still be able to get an exchange from the store, quicker than you can get a repair done. You may want to look into that possibility.
    Fifth, it does appear you found the Logic forum. I would persist in asking there how to solve your technical issue with Logic regarding the audio. It may be you don't have to do anything special to the hard drive. Remember audio can be transmitted by wire, avoiding ambient sounds.
    Good luck!

  • What image resolution should use for the new iPad with Retina display?

    What image resolution should use for the new iPad with Retina display?

    http://www.ipadcasereview.com/ipad-3-cases-and-covers-top-of-page/#sthash.hZKnxH ku.dpbs
    these are the best

  • Error "printhead problem please use setup cartidge that came with the printer"

    Hi, I have purchased a HP Deskjet 5525 All in one printer, it was working perfectly till 1 year, then i had not used it about 6 months, now when tried to use it again then it was throwing the error "Printhead is damaged, missing, not installed properly or damaged etc...",  then i cleaned the printhead and reinstalled it in printer then i inserted the cartidge now its generating the error "please use setup cartidge that came with printer" but among the setup cardige "yellow", "magenta", "Cyan" is accessible  by printer but when i use the black then it says "properly not installed, missing cartidge".
    So please tell me  do i need to purchase a new black cartidge, will it work? or what shoud i do ?
    cartidge NO- 685
    Thanks
    Nirmal

    Hi @nirmal007,
    Welcome to the HP Support Forum!  I understand you're having cartridge issues with your HP Deskjet Ink Advantage 5525 e-All-in-One Printer.  I would like to assist you with clearing up that error state and have some troubleshooting steps that may resolve the issue. 
    I recommend you try the following steps before you consider purchasing a new black ink cartridge.  Firstly after you've confirmed that your ink levels are not the problem (example - the level is above 10%), try a 'hard reset':
    Secondly:
    Make sure that the ink cartridges are properly vented and seated correctly
    If the vent on the top of the ink cartridge is clogged or obstructed, the ink cartridge might not work properly. Follow these steps to make sure that the ink cartridges are properly vented and seated correctly.
    Press the Power button to turn on the printer, if it is not already turned on. Wait until the printer is idle and silent before continuing.
    Open the cartridge access door. The carriage moves to the access area.
    Figure : Open the cartridge access door
    Press the tab on the front of the cartridge inward to release it, and then pull up on the cartridge to remove it from the slot.
    Figure : Remove the cartridge from the slot
    Examine the vent area on each cartridge, above the HP logo on the top of the cartridge.
    Figure : Vent area on the top of the cartridge
    If the cartridge still has the orange pull-tab attached, pull to remove it.
    Figure : Orange pull tab
    If the vent is clogged, use a straight pin to gently remove excess adhesive from the vent.
    Figure : Clean the clogged vent with a pin
    Clogged vent
    With a straight pin, gently remove excess adhesive from the vent
    Unclogged vent
    With the nozzle and contacts facing down, slide the cartridge into its slot. Press down on the cartridge until it clicks into place.
     note:Make sure that each cartridge is installed in the correct slot. Match the shape of the icon and the color of the cartridge with the slot that has the same shaped icon and color.
    Figure : Reinsert the cartridge
    Repeat these steps to inspect the vents on each of the cartridges.
    Make sure that each cartridge is firmly in place in its slot. Run your finger along the top of the cartridges to feel for any that are protruding, and if any are, press down firmly until each cartridge snaps into place.
    Close the cartridge access door.
    Figure : Close the cartridge access door
    Source
    Thirdly, try cleaning your cartridge contacts:
    Manually cleaning the print cartridge contacts
    Follow the steps below to manually clean the print cartridge contacts:
    Gather the following items to clean the contacts:
    Distilled water (tap water may contain contaminants that can damage the print cartridge)
    Cotton swabs or other soft, lint-free material that will not stick to the print cartridge
    Open the print cartridge door.
    Remove the print cartridge and place it on a piece of paper with the ink nozzle plate facing up.
     caution:
    Do not to touch the copper-colored contacts or the ink nozzle plate with your fingersFigure : Do not touch copper-colored contacts
     caution:Do not leave the print cartridge outside the printer for more than 30 minutes. Ink nozzles exposed to the air longer than this may dry out and cause printing problems.
    Lightly moisten a cotton swab with distilled water and squeeze any excess water from the swab.
    Gently wipe the copper-colored contacts with the cotton swab.
     caution:Do not touch the ink nozzle plate. Touching the ink nozzle plate will result in clogs, ink failure, and bad electrical connections.
    Repeat steps 4 and 5 until no ink residue or dust appears on a clean swab.
    Insert the print cartridge in the printer, and then close the print cartridge door.
    Source
    If you've tried all of the above noted steps and you're still unable to use the black cartridge, you may need to pick up a new one.  Let me know if this helps.  Best of luck! 
    E-roq
    I work on behalf of HP.
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • WebI issue with hierarchy display and aggregation

    Trying to wrangle what looks like a defect in WebI's handling of hierarchy display and aggregation. We just completed an update cycle and are running BOBJ 4.1 SP4.
    The hierarchy is a standard FM Commitment Item hierarchy in which both the nodes and leaves are Commitment Items (i.e. it uses InfoObject nodes, not text nodes). An example of one of these nodes looks like this in BW:
    Cmmt_Item A - Node
        Cmmt_Item B - Leaf
        Cmmt_Item C - Leaf
    Let's pretend Commitment Item A has $50 posted to it, B has $20 and C has $30. Analysis for OLAP handles this by adding a virtual leaf line to distinguish postings that are on the parent node like so:
    Cmmt_Item A - Node       $100
        Cmmt_Item A - Leaf    $50
        Cmmt_Item B - Leaf    $20
        Cmmt_Item C - Leaf    $30
    So you see both the total for the node ($100) and a line for each Commitment Items with KFs posted to them. Our users like this. They can easily see the aggregation and the breakdown.
    WebI, on the other hand, will display it like this:
    Cmmt_Item A - Node       $150
        Cmmt_Item B - Leaf    $20
        Cmmt_Item C - Leaf    $30
    It doesn't create a separate line for the value of the parent node, but it does add it's value into the aggregate. Twice. Modifying the table with the 'avoid duplicate row aggregation' checkbox yields output like this:
    Cmmt_Item A - Node       $100
    Cmmt_Item A - Node        $50
        Cmmt_Item B - Leaf    $20
        Cmmt_Item C - Leaf    $30
    We're about halfway there. While the top row now shows the correct aggregation and it creates a new line to show the distinct amount on the parent node, that new line appears on the same level as the parent. It's no longer clear that there's an aggregate and a breakdown. And attempting to expand or contract a node will now crash the report with one of those 'Error 16' messages.
    Has anyone encountered this issue with hierarchies in WebI? This report was built from scratch in 4.1, so I'm not sure if this affects older versions or not. Or if it would affect any hierarchy that uses InfoObject nodes instead of text nodes.

    Without a fix, the simplest workaround I can think of would be to restructure the hierarchy. It can't use postable nodes, so Cmmt_Item A  - Node from my example would need to be converted into a text node and the postable characteristic added as a child on the same level as the B and C leaves.
    This looks like it would affect anyone using hierarchies with postable nodes in a WebI report.
    Another oddity in WebI's behavior here - even though the postable nodes show incorrect sums the sum at the root node is correct. So extending my examples from the original post:
    Root Node                    $100
        Cmmt_Item A - Node       $150
            Cmmt_Item B - Leaf    $20
            Cmmt_Item C - Leaf    $30

  • How do I install Adobe creative suite cs6 design and web premium on macbook pro 15 with retina display?

    I have a macbook pro 15 with retina display. It has no disc drive. How do I install my adobe creative suite cs6 design and web premium

    Hi macrouch7,
    Please find the download links in the link given below:
    Download CS6 products
    Regards,
    Sheena

  • Error while building Web Services for Invoking PL/SQL with ANT

    Hello,
    i tried to build the demo- webservice for plsql- stored procedure, but while i want to run the demo with ant i get the following error:
    The same Error occures while Run the Demo with seperate commands: Step 5a(1) Assembly:
    env-check:
    init:
    [mkdir] Created dir: D:\ORAWebServices\webservices_demos\webservices_demos\db\plsql\build\classes\service
    wsa:
    [java] Fehler: oracle.j2ee.ws.tools.wsa.cli.CommandLineMessageBundle_de
    BUILD FAILED
    D:\ORAWebServices\webservices_demos\webservices_demos\db\plsql\build.xml:45: The following error occurred while executing this line:
    D:\ORAWebServices\webservices_demos\webservices_demos\common.xml:74: Java returned: 1
    Total time: 3 seconds
    The Database runs on a remote system and the service-connfig.xml is updated.
    Thanks for Help.

    I assume you have OC4J 10.1.3 webservices installed. Then you should not be using service-config.xml. Check out the 10.1.3 documentation about WebServiceAssembler. I am afraid, you are using 10.1.2 style service-config.xml along with 10.1.3 style WebServiceAssembler.

  • Error when trying to use FaceTime on MacBook Pro with OS X Lion

    I have been trying to use Facetime on my MacBook Pro that has OS X Lion, and I keep on getting an error that reads:
    "The server encountered an error processing registration. Please try again later."
    Can anyone help me out with the fix to this error?
    I already deleted the one key with no author from the keychain access.
    Thank you!

    AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). You can see which Mac you have and which operating system you are using by selecting 'About this Mac' from the Apple menu in the top left corner of your Mac and selecting the 'More Info' button.

  • Error when trying to use (GUI Wizards) on Table with BLOB, CLOB columns.

    I enjoyed watching the demo of ODP.NET/VS 2005 Environment where you can just drag the new command builders, data sets, etc.. but when I try this with a table that contains a BLOB and CLOB column it returns an error and basically cannot build the SQL needed to process these field types.
    I would assume it could do this natively since it is somewhat of a primitive type. I also tried to point it to a Stored Proc that returned a blob and it caused an error when building the SQL.
    So it appears it is not possible to use the GUI data access wizards for these column types. I can use them in code with the ODP.NET with no problems but it would be nice to be able to utilize the GUI Command Builders, etc...

    blob and clob are not supported i guess. oracle is a bit sluggish when it comes to VS and MS products!

  • Using computer in closed clamshell with second display sleep issues

    Hi,
    I'd really appreciate someone's input here - this article (http://support.apple.com/kb/ht3131) guides you through using a macbook pro in closed clamshell with a second display - the trouble is that my machine goes straight back to sleep within seconds of me waking it up?? - I'm using the 'allow bluetooth devices to wake this computer' setting.
    Can you help?
    Thank you.
    Graham

    Is the computer connected to power?

  • How to use percentage functions in BEx with structures

    Hi, I need a help.
    I have a query with a structure in the rows: two characteristics at left then the structure.
    Plant, Year/Month and a structure with 3 lines (Line A = movement type = 1, 2, 3, Line B types 4, 5, 6, Line C types 7, 8, 9).
    In the rows just a quantity.
    I'm trying to use percentage functions CT or GT in the rows, but it's not working.
    The idea is something like:
    Plant 01    07/2010   Line A    30  30%
                                     Line B    20  20%
                                     Line C    50  50%
                     Result                          33%
                     08/2010   Line A    40  20%
                                     Line B    60  30%
                                     Line C   100 50%
                     Result                          66%.
    When I do not use the structure percentage function works well, but with the structure results are completely wrong.
    Any help will be appreciated.
    César Menezes

    You either have to use exception aggregation to give you the total per plant and use that in your percentage calculation, or you could define a formula in the cells. Here you can reference the specific cells you want to use as inputs.

  • Oracle ADF example of use of Single One Choice with Hierarchy Viewer

    I am using JDeveloper Studio 11.1.2.3.0.
    I am looking for a simple example where one can select a value from a Single One Choice component and have it drive a query
    for populating the Hierarchy Viewer.

    You can just use a VO with parameter as the base of your HV - then drag the executeWithParam operation to the page as a parameter form.
    And possibly add a list or LOV to the parameter.
    https://blogs.oracle.com/shay/entry/adding_an_lov_to_a_query_param
    Instead of the table in the video use the HV.

  • Inexpensive ways to use working iPad mini 2 with broken display?

    My iPad Mini 2 display is broken (both glass & display), making the screen unusable, but the iPad itself still works OK. I can't afford a replacement display for several months.  Are solutions available to allow at least limited access to the iPad & its apps. Preferred solution would involve use of another tablet I have to access the iPad, a la TeamViewer-type access.

    My iPad Mini 2 display is broken (both glass & display), making the screen unusable, but the iPad itself still works OK. I can't afford a replacement display for several months.  Are solutions available to allow at least limited access to the iPad & its apps. Preferred solution would involve use of another tablet I have to access the iPad, a la TeamViewer-type access.

  • Problems with hierarchy display when using SAPBEXonRefresh

    Dear all,
    I would like to create dynamic logos in BEx Analyzer. It means I need to change the logo image depending on value of certain free characteristic ("LOGO_ID").
    At the moment, I have achieved that logo pictures (6 in total) are swapped by adding VBA code to SAPBEXonRefresh.
    Unfortunately hierarchy symbols become to act very strange. Basically there are two problems:
    1. They are not refreshed after hierarchy compression; those hierarchy symbols which are outside of result area are not removed
    2. Pressing symbols in order to expand/collapse hierarchy sometimes does not produce any effect.
    Code is show bellow and here is brief explanation of it. First, we are searching for "LOGO_ID" string in document. One cell to the right is value which tells us what logo to make visible. There are six logo pictures  in worksheet with names: "L1", "L2", "L3", "L4", "L5", "L6" and only one should be visible.
    Problem seems to be in working with Shapes (logo pictures are Shapes) since hierarchy expand/collapse symbols are also of the same type.
    Any ideas would be appreciated.
    Sub SAPBEXonRefresh(queryID As String, resultArea As Range)
    Call ShowLogo
    End Sub
    Sub ShowLogo1()
       Dim UniLogo As String
       Dim UniRange As Range
       Dim vaUnis As Variant
        If WorksheetFunction.CountIf(Cells, "LOGO_ID") = 0 Then
           Exit Sub
        End If
        Set UniRange = Cells.Find(What:="ID izvornog sustava", After:=[A1], LookIn:=xlFormulas, _
            LookAt:=xlPart, SearchOrder:=xlByColumns, _
            SearchDirection:=xlNext, MatchCase:=False)
        UniLogo = UniRange.Offset(0, 1).Value
        If UniLogo <> "" Then
           If ActiveSheet.Shapes(UniLogo).Visible = msoTrue Then
             Exit Sub
           End If
        End If
        vaUnis = VBA.Array("L1", "L2", "L3", "L4", "L5", "L6", )
        For i = 0 To 5
            ActiveSheet.Shapes(vaUnis(i)).Visible = msoFalse
        Next i
        If UniLogo <> "" Then
          ActiveSheet.Shapes(UniLogo).Visible = msoTrue
        End If
    Kind regards, Josko.

    Hi Josko,
    Where do you have this problem 3.5 or 7.0 BexAnalyzer.
    When ever heirarchy icons are created in BEx, respective hyperlink is assigned to each of them, Make sure that you dont manipulate with them,,
    If you still have problem then create OSS message.
    Regards,
    Vinay

  • Defining error-page in web.xml

    Hi,
    We are using oracle 9iAS with oc4j container. I have defined error-page for redirecting 404 error-code in web.xml. It works fine with all browsers except internet explorer 5.5 and higher, IE ignores and displays 'page cannot be displayed' page. Can anybody help me on this, but on the otherhand if I send response.sendError(404);, it recognizes and invokes page.
    Thanks for the advice

    Hi,
    Thanks for your reply to me.
    I am doing something wrong but I can't find it.
    I add the following code to my WEB-INF/web.xml file under the web-app tag, using jdeveloper.
    <error-page>
    <error-code>404</error-code>
    <location>notFound.html</location>
    </error-page>
    then all of my jsp's in my project have this error message when I buit them.
    -Error(1): oracle.xml.parser.v2.XMLParseException: Invalid element 'error-page' in content of 'web-app', expected elements '[taglib, resource-ref, security-constraint, login-config, security-role, env-entry, ejb-ref]'.
    Can yo help me???
    thanks in advence...

Maybe you are looking for