Error in BOR Method
Hi Experts,
I need to update Infotype 2002 (Employee Attendance) in travel request approval work flow.
For that I am using set of standard BAPI 's
"BAPI_EMPLOYEE_ENQUEUE"
"HR_INFOTYPE_OPERATION"
"BAPI_EMPLOYEE_DEQUEUE"
But I am getting the error
The exception 'CX_HRPA_INVALID_PARAMETER' was raised, but it was not caught
anywhere along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_HRPA_RESOLVE_EXCEPTION=====CP' has to be
terminated.
When I am using same code in program, It's working fine without any error.
can anyone suggest me , why this error is in BOR method and how to solve it.
Thanks in advance.
Regards,
Priya
Dear Vimal,
I checked Note 1087428.
That note says :
You try to use transaction PA30 to create infotype 0706. In the run up, you did not use transaction PA40 to plan for the relevant personnel number. Therefore, infotype 0710 does not exist.
Upto my understanding, transaction PA40 is for employee action, PA30 for employee master data maintainance and PA20 for employee master data display. so i have to use PA30 transaction for master data maintanance.
For master data maintainance there is group of SAP standard function modules,
BAPI_EMPLOYEE_ENQUEUE
HR_INFOTYPE_OPERATION
BAPI_EMPLOYEE_DEQUEUE
If we use these function modules, they are same as PA30 transaction.
When I used these FMs in my report program, they are working fine as their behaviour.
But when i used these FMs in BOR method in Work Flow, FM 'HR_INFOTYPE_OPERATION' is throwing dump.
I asked this to SAP, they reply that they didn't release FM 'HR_INFOTYPE_OPERATION' for custom programs, so they will provide any support on this problem.
So I did work around for the same : I created one FM and inside FM i m calling BDC. That's working fine.
Thanx to all for help.
Regards,
Priya
Similar Messages
-
How to raise exception in bor method without showing runtime error
I want to raise custom exception in the bor method like below. However, it will show runtime error when executing codes below. Any knows how to raise custom exception in the bor method without runtime error?
raise 9021.Hi Nick
You need to define the exception 9021 for the method and then you use the macro EXIT_RETURN as below
exit_return 9021 sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
Regards
Ravi -
Error using a method call in the starting conditions of a Workflow
Hi,
In SRM 4, I have a doubt about a start condition with WFWS14000109 I need to trigger the WF depending on organizational unit of the requester (not purchase group or purchase organization).
I have seen in the editor, in SWB_COND in the part of requisitionerUser the Method ReadOrgUnit.
I change to traditional mode of the editor and when I select the method I get in Express1. field
&_EVT_OBJECT.REQUISITIONERUSER.READORGUNIT(_RESULT='OBEG';ACTORGUNIT= )&
If I use = and the organizational unit in express2 field I get error
Partial expression expected (expression '&_EVT_OBJECT_REQUISITIONERUSER.READORGUNIT(_RESULT',position 76)
Can anybody say me where is the error? how I should express the condition.
Thanks
Best RegardsI don't think you can use a BOR method in a condition. At least not as far as I know. I think it would be better to create a virtual attribute in your delegated subtype of BUS2121 and use that in the condition.
Regards,
Martin -
Using the transaction launcher to call a BOR method to display a PDF
Hello gurus,
I have created a PDF icon and an onclick action to open a pdf, that displays on every row of an assignment block in the actions column, but I do not know the technical process to determine how to get a PDF from the IXOS system from the line selected. (even if I know it depends on an ID attribute of that assignment block) I want to to call a transaction launcher with the url for the pdf in the IXOS that has an ID that identifies which line in the assignment block the user has clicked the pdf icon for (does that make sense?)
In CRM 4, in the collection factsheet assignment block, the link was coded into an XSLT which is then displayed in the GUI and you would have a clickable link for a pdf file in a row in a table. That link would be as follows:
<xsl:variable name="ev_key">SAPEVENT:?OBJTYPE=<xsl:value-of select="attributes/OBJTYPE"/>&OBJKEY=<xsl:value-of select="@KEY"/>&LOGSYS=<xsl:value-of select="attributes/LOGSYS"/></xsl:variable>
<a href="{$ev_key}"></a>
This will get the file in IXOS and display it, in CRM 4. In CRM 7, the link is an icon in every line of an assignment block.
Here are some questions I have now for the functional side in the meantime:
1) Can we fetch the PDF in IXOS for each line of an assignment block and have it open? If so, how? Transaction launcher, function modules (like ARCHIVOBJECT_DISPLAY) in the OPTA package? (the package for all IXOS related function modules..)
2) Which URL should I call with the transaction launcher? a URL link to the PDF on the IXOS system?? or sapevent:xxx?
3) Do we have to configure a transaction in the IMG to be launched with the attributes listed there? Do we have to link it to any classes/ objects?
4) Do we have to have the code to the logical link dynamically to call the right PDF for each table line? Is it right to put this code in my event handler?? Usually transaction launchers are just in the nav bar.....
5) Are there any existing examples of this or a similar functionality/ logic that I could refer to, preferably in CRM 7 WebUI?
6) Do you have any code to just display a PDF in a new window? Or prompt a download?
One possible way I thought of would be for me to have a logical link defined in the IMG for the transaction launcher, and have the attributes defined for my BOR object that I would call, and pass it different attributes (eg. objtype, objkey, logsys...) and then return the PDF and display it in the UI in a new browser window by itself. (There is a BOR method for my BOR object named 'display_pdf'!!!!)
What do you think would be the optimal solution here? Does my theory of calling a BOR object with a transaction launcher to display a PDF make ANY sense whatsoever???
Please do not hesitate to propose any potential solution. Any partial answers/ links to wikis/ other threads, anything would be much appreciated.
Thank you in advance.
Best regards,
Jonathan Laplante
Edited by: Jonathan Laplante on Jul 2, 2011 4:50 AMHi Any help on this....I am still awaiting the response.
Requirement: My requirement is to launch the SE38 transaction on WEBUI using transaction luncher tool and set the parameter on the selection screen.
Issue: The issue is that I am able to lunch the transaction but unable to set the parameter
Steps Performed:
I want to list down all the steps I performed to launch an SE38 transaction using transaction launcher on the WEBUI
1) Defined logical system in tcode CRMS_IC_CROSS_SYS
-The logical link looks like this
http://<server>:<port>/sap/bc/gui/sap/its/webgui/!?transaction=IC_LTXE&okcode=ICEXECUTE ?sap-client=300
2) Defined URL & paratemeter wherein the request method is "GET", opted for NON-BSP URL
URL link here is
http://<server>:<port>/sap/bc/gui/sap/its/webgui/!?transaction=SE38&okcode=ONLI
-Note: My selection screen okcode os ONLI*
-The logical system ref is provided here
3) Defined the parameter by giving the screen name like for SE38 selection screen name is "RS38M-PROGRAMM"
4) Configured the transaction launcher of type B - URL type and provided the reference of the URL ID, choose the relevant parameter from the drop down and have hardcoded the value, cheked the box "Save Data in Activity Clipboard
5) Added this in the NAvlink/Bus Role etc
6) Now in the handler class of the TL the code looks like this:
IF_CRM_IC_ACTION_HANDLER~PREPARE_DATA_FLOW
__gdc ?=
cl_crm_ui_data_context_srv=>get_instance( gv_view_controller ).
__value
=
'ZC_TEST'.
add_parameter(
iv_name =
'RS38M-PROGRAMM'
iv_value = __value ).
However, after performing the above steps I am unable to set the parameter. Please suggest where am I missing out on. An early response would really be appreciated. -
Hi , when i try to run my program, i keep getting the error msg:
Error(23,19): method getName(java.lang.String) not found in class javax.swing.JTextField
I have checked the java API and it inherits from the awt.Component class and should be accessible via the jtextfield.
I have tried the following:
trying to initailise the JTextField at the start.
Using getName works if i use it within the loop after setting the name.
Does anybody know what i am doing wrong please?
public class clsMember extends JPanel implements ActionListener {
private JButton jbtnLog;
private String surname;
private JTextField txtItem;
public clsMember() {
super(new SpringLayout());
makeInterface();
surname = txtItem.getName("Surname").toString();
private void makeInterface() {
//code omitted
for (int i = 0; i < numpairs; i++) {
JLabel l = new JLabel(strLabels, JLabel.LEADING);
this.add(l);
//if the array item is salutation create a combobox
if (strLabels[i] == "Salutation") {
jcomSalutation = new JComboBox(strSalutation);
jcomSalutation.setSelectedIndex(0);
this.add(jcomSalutation);
} else {
txtItem = new JTextField(10);
l.setLabelFor(txtItem);
txtItem.setName(strLabels[i].replaceAll(" ", "")); //this is where the label is set and if i do a system.out it shows fine. getName works here too.
this.add(txtItem);
//code omittedIf i have a loop that creates the jtextfields such as
txtItem = new JTextField(10);
l.setLabelFor(txtItem);
txtItem.setName(strLabels.replaceAll(" ", ""));
this.add(txtItem);How is it then possible to assign to a string the value of a *specific jtextfield*. Lets say that one of these JTextfields has the name surname.
How is it possible for me to writeString surname = surnamejtextfield.getText(); -
How to call a standard BOR method in a program.
Hi All,
How to call a standard BOR method in a program. For example I have to call BOR method ISUSMORDER.Release in my program but don't know how to call.
Also, plz tell me how to capture the Exceptions in case of BOR method.
Plz help me out in this.
Thanks,
MithileshWould be easier (however not always possible), to determine the functionality of this method and call that in your program. I mean, normally this method calls a BAPI, or function module (or a transaction). Have a look at the coding inside of the method, and try and use this.
-
Error: "Function or method not supported." when using RF List Mode on NI 5673E
Hi,
I am trying to use the RF List Mode in NI RFSG 5673E. I tried running the sample code "RFSG Configuration List Frequency and Power Sweep.vi" but an error would show up:
"Error: niRFSGCreateConfigurationList.VI <ERR> The LO reported the following error: Function or method not supported." with the error code: BFFA4239.
I also tried running other sample codes that contain the Configuration List VI's but the same error appeared. I am using NI RFSG 1.8.5.
I would really appreciate any help on this. Thanks!Hello jdlabrador,
I setup a 5673E here and tried to run the same example. I did not encounter an error.
Other reports I've found pertaining to this error usually involved a large number of steps - there was not enough space on the hardware to accommodate them. The error text you're seeing is a little different in that it states that the Create Configuration List method isn't supported for the LO.
Do each of the modules in your 5673E (5450, 5611, 5652) pass a self-test in MAX?
Have you associated the 5450 and 5652 with the 5611?
Could you post a screenshot of the fully-expanded Devices and Interfaces tree from MAX?
Since RFSG 1.9.5 is available, it may be a good first-step to upgrade to it.
Best regards,
Matthew H.
Applications Engineer
National Instruments -
Unexpected error occurred in method 'Put' , usage 'SPViewStateCache' - Exception
I am getting below error when I am trying to upload a document to SP 2013 using CSOM (Of BizTalk)
Unexpected error occurred in method 'Put' , usage 'SPViewStateCache' - Exception 'Microsoft.ApplicationServer.Caching.DataCacheException: ErrorCode<ERRCA0018>:SubStatus<ES0001>:
The request timed out.. Additional Information : The client was trying to communicate with the server :net.tcp://XXXX:22233
at Microsoft.ApplicationServer.Caching.DataCache.ThrowException(ResponseBody respBody, RequestBody reqBody)
at Microsoft.ApplicationServer.Caching.DataCache.InternalPut(String key, Object value, DataCacheItemVersion oldVersion, TimeSpan timeout,
DataCacheTag[] tags, String region, IMonitoringListener listener)
Somewhere down the logs then another following error is recorded:
<TraceRecord xmlns="http://schemas.microsoft.com/2004/10/E2ETraceEvent/TraceRecord" Severity="Warning"><TraceIdentifier>http://msdn.microsoft.com/en-US/library/System.ServiceModel.Channels.SocketConnectionAbort.aspx</TraceIdentifier><Description>SocketConnection
aborted</Description><AppDomain>/LM/W3SVC/2/ROOT/81d12ab944d94c29a629fae7508ad28b-1-130481510403888701</AppDomain><Source>System.ServiceModel.Channels.SocketConnection/15268232</Source></TraceRecord>
06/25/2014 08:29:23.88 w3wp.exe (0x1A24)
0x1600 SharePoint Foundation
Service Connections
ev2x Verbose
System.ServiceModel Error: 131075 :
06/25/2014 08:29:23.88 w3wp.exe (0x1A24)
0x1600 SharePoint Foundation
Service Connections
ev2x Verbose
<TraceRecord xmlns="http://schemas.microsoft.com/2004/10/E2ETraceEvent/TraceRecord" Severity="Error"><TraceIdentifier>http://msdn.microsoft.com/en-US/library/System.ServiceModel.Diagnostics.ThrowingException.aspx</TraceIdentifier><Description>Throwing
an exception.</Description><AppDomain>/LM/W3SVC/2/ROOT/81d12ab944d94c29a629fae7508ad28b-1-130481510403888701</AppDomain><Exception><ExceptionType>System.Net.Sockets.SocketException, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</ExceptionType><Message>The
I/O operation has been aborted because of either a thread exit or an application request</Message><StackTrace> at System.ServiceModel.Channels.SocketConnection.HandleReceiveAsyncCompleted() at System.ServiceModel.Channels.SocketConnection.OnReceiveAsync(Obje...
06/25/2014 08:29:23.88* w3wp.exe (0x1A24)
0x1600 SharePoint Foundation
Service Connections
ev2x Verbose
...ct sender, SocketAsyncEventArgs eventArgs) at System.Net.Sockets.SocketAsyncEventArgs.FinishOperationAsyncFailure(SocketError socketError, Int32 bytesTransferred, SocketFlags flags) at System.Net.Sockets.SocketAsyncEventArgs.CompletionPortCallback(UInt32
errorCode, UInt32 numBytes, NativeOverlapped* nativeOverlapped) at System.Threading._IOCompletionCallback.PerformIOCompletionCallback(UInt32 errorCode, UInt32 numBytes, NativeOverlapped* pOVERLAP) </StackTrace><ExceptionString>System.Net.Sockets.SocketException
(0x80004005): The I/O operation has been aborted because of either a thread exit or an application request</ExceptionString><NativeErrorCode>3E3</NativeErrorCode></Exception></TraceRecord>
06/25/2014 08:29:23.88 w3wp.exe (0x1A24)
0x1600 SharePoint Foundation
Service Connections
ev2x Verbose
System.ServiceModel Error: 131075 :
06/25/2014 08:29:23.88 w3wp.exe (0x1A24)
0x1600 SharePoint Foundation
Service Connections
ev2x Verbose
<TraceRecord xmlns="http://schemas.microsoft.com/2004/10/E2ETraceEvent/TraceRecord" Severity="Error"><TraceIdentifier>http://msdn.microsoft.com/en-US/library/System.ServiceModel.Diagnostics.ThrowingException.aspx</TraceIdentifier><Description>Throwing
an exception.</Description><AppDomain>/LM/W3SVC/2/ROOT/81d12ab944d94c29a629fae7508ad28b-1-130481510403888701</AppDomain><Exception><ExceptionType>System.TimeoutException, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</ExceptionType><Message>The
socket was aborted because an asynchronous receive from the socket did not complete within the allotted timeout of 00:01:00. The time allotted to this operation may have been a portion of a longer timeout.</Message><StackTrace> at System.ServiceModel.Channels.SocketConne...
06/25/2014 08:29:23.88* w3wp.exe (0x1A24)
0x1600 SharePoint Foundation
Service Connections
ev2x Verbose
...ction.EndRead() at System.ServiceModel.Channels.ConnectionStream.ReadAsyncResult.HandleIO(IConnection connection) at System.ServiceModel.Channels.ConnectionStream.IOAsyncResult.OnAsyncIOComplete(Object state)
at System.ServiceModel.Channels.SocketConnection.OnReceiveAsync(Object sender, SocketAsyncEventArgs eventArgs) at System.Net.Sockets.SocketAsyncEventArgs.FinishOperationAsyncFailure(SocketError socketError, Int32 bytesTransferred, SocketFlags
flags) at System.Net.Sockets.SocketAsyncEventArgs.CompletionPortCallback(UInt32 errorCode, UInt32 numBytes, NativeOverlapped* nativeOverlapped) at System.Threading._IOCompletionCallback.PerformIOCompletionCallback(UInt32 errorCode,
UInt32 numBytes, NativeOverlapped* pOVERLAP) </StackTrace><ExceptionString>System.TimeoutEx...
06/25/2014 08:29:23.88* w3wp.exe (0x1A24)
0x1600 SharePoint Foundation
Service Connections
ev2x Verbose
...ception: The socket was aborted because an asynchronous receive from the socket did not complete within the allotted timeout of 00:01:00. The time allotted to this operation may have been a portion of a longer timeout. ---&gt; System.Net.Sockets.SocketException:
The I/O operation has been aborted because of either a thread exit or an application request at System.ServiceModel.Channels.SocketConnection.HandleReceiveAsyncCompleted() at System.ServiceModel.Channels.SocketConnection.OnReceiveAsync(Object
sender, SocketAsyncEventArgs eventArgs) --- End of inner exception stack trace ---</ExceptionString><InnerException><ExceptionType>System.Net.Sockets.SocketException, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</ExceptionType><Message>The
I/O opera...
06/25/2014 08:29:23.88* w3wp.exe (0x1A24)
0x1600 SharePoint Foundation
Service Connections
ev2x Verbose
...tion has been aborted because of either a thread exit or an application request</Message><StackTrace> at System.ServiceModel.Channels.SocketConnection.HandleReceiveAsyncCompleted() at System.ServiceModel.Channels.SocketConnection.OnReceiveAsync(Object
sender, SocketAsyncEventArgs eventArgs)</StackTrace><ExceptionString>System.Net.Sockets.SocketException (0x80004005): The I/O operation has been aborted because of either a thread exit or an application request at System.ServiceModel.Channels.SocketConnection.HandleReceiveAsyncCompleted()
at System.ServiceModel.Channels.SocketConnection.OnReceiveAsync(Object sender, SocketAsyncEventArgs eventArgs)</ExceptionString><NativeErrorCode>3E3</NativeErrorCode></InnerException></Exception></TraceRecord>
06/25/2014 08:29:23.88 w3wp.exe (0x1A24)
0x1600 SharePoint Foundation
Service Connections
ev2x Verbose
System.ServiceModel Error: 131075 :
06/25/2014 08:29:23.88 w3wp.exe (0x1A24)
0x1600 SharePoint Foundation
Service Connections
ev2x Verbose
<TraceRecord xmlns="http://schemas.microsoft.com/2004/10/E2ETraceEvent/TraceRecord" Severity="Error"><TraceIdentifier>http://msdn.microsoft.com/en-US/library/System.ServiceModel.Diagnostics.ThrowingException.aspx</TraceIdentifier><Description>Throwing
an exception.</Description><AppDomain>/LM/W3SVC/2/ROOT/81d12ab944d94c29a629fae7508ad28b-1-130481510403888701</AppDomain><Exception><ExceptionType>System.TimeoutException, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</ExceptionType><Message>The
socket was aborted because an asynchronous receive from the socket did not complete within the allotted timeout of 00:01:00. The time allotted to this operation may have been a portion of a longer timeout.</Message><StackTrace> at System.ServiceModel.Channels.StreamConne...
06/25/2014 08:29:23.88* w3wp.exe (0x1A24)
0x1600 SharePoint Foundation
Service Connections
ev2x Verbose
...ction.EndRead() at System.ServiceModel.Channels.SessionConnectionReader.OnAsyncReadComplete(Object state) at System.Runtime.Fx.AsyncThunk.UnhandledExceptionFrame(IAsyncResult result) at System.Net.LazyAsyncResult.Complete(IntPtr
userToken) at System.Net.FixedSizeReader.ReadCallback(IAsyncResult transportResult) at System.Runtime.AsyncResult.Complete(Boolean completedSynchronously) at System.ServiceModel.Channels.ConnectionStream.IOAsyncResult.OnAsyncIOComplete(Object
state) at System.ServiceModel.Channels.SocketConnection.OnReceiveAsync(Object sender, SocketAsyncEventArgs eventArgs) at System.Net.Sockets.SocketAsyncEventArgs.FinishOperationAsyncFailure(SocketError socketError, Int32 bytesTransferred,
SocketFlags flags) at System.Net.Sockets.SocketAsyncEv...
06/25/2014 08:29:23.88* w3wp.exe (0x1A24)
0x1600 SharePoint Foundation
Service Connections
ev2x Verbose
...entArgs.CompletionPortCallback(UInt32 errorCode, UInt32 numBytes, NativeOverlapped* nativeOverlapped) at System.Threading._IOCompletionCallback.PerformIOCompletionCallback(UInt32 errorCode, UInt32 numBytes, NativeOverlapped* pOVERLAP)
</StackTrace><ExceptionString>System.TimeoutException: The socket was aborted because an asynchronous receive from the socket did not complete within the allotted timeout of 00:01:00. The time allotted to this operation may have been a portion
of a longer timeout. ---&gt; System.IO.IOException: The read operation failed, see inner exception. ---&gt; System.TimeoutException: The socket was aborted because an asynchronous receive from the socket did not complete within the allotted
timeout of 00:01:00. The time allotted to this operation may have b...
06/25/2014 08:29:23.88* w3wp.exe (0x1A24)
0x1600 SharePoint Foundation
Service Connections
ev2x Verbose
...een a portion of a longer timeout. ---&gt; System.Net.Sockets.SocketException: The I/O operation has been aborted because of either a thread exit or an application request at System.ServiceModel.Channels.SocketConnection.HandleReceiveAsyncCompleted()
at System.ServiceModel.Channels.SocketConnection.OnReceiveAsync(Object sender, SocketAsyncEventArgs eventArgs) --- End of inner exception stack trace --- at System.Runtime.AsyncResult.End[TAsyncResult](IAsyncResult
result) at System.ServiceModel.Channels.ConnectionStream.ReadAsyncResult.End(IAsyncResult result) at System.Net.FixedSizeReader.ReadCallback(IAsyncResult transportResult) --- End of inner exception stack trace ---
at System.Net.Security.NegotiateStream.EndRead(IAsyncResult asyncResult) at Syst...
06/25/2014 08:29:23.88* w3wp.exe (0x1A24)
0x1600 SharePoint Foundation
Service Connections
ev2x Verbose
...em.ServiceModel.Channels.StreamConnection.EndRead() --- End of inner exception stack trace ---</ExceptionString><InnerException><ExceptionType>System.IO.IOException, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</ExceptionType><Message>The
read operation failed, see inner exception.</Message><StackTrace> at System.Net.Security.NegotiateStream.EndRead(IAsyncResult asyncResult) at System.ServiceModel.Channels.StreamConnection.EndRead()</StackTrace><ExceptionString>System.IO.IOException:
The read operation failed, see inner exception. ---&gt; System.TimeoutException: The socket was aborted because an asynchronous receive from the socket did not complete within the allotted timeout of 00:01:00. The time allotted to this operation may
have been a port...
06/25/2014 08:29:23.88* w3wp.exe (0x1A24)
0x1600 SharePoint Foundation
Service Connections
ev2x Verbose
...ion of a longer timeout. ---&gt; System.Net.Sockets.SocketException: The I/O operation has been aborted because of either a thread exit or an application request at System.ServiceModel.Channels.SocketConnection.HandleReceiveAsyncCompleted()
at System.ServiceModel.Channels.SocketConnection.OnReceiveAsync(Object sender, SocketAsyncEventArgs eventArgs) --- End of inner exception stack trace --- at System.Runtime.AsyncResult.End[TAsyncResult](IAsyncResult
result) at System.ServiceModel.Channels.ConnectionStream.ReadAsyncResult.End(IAsyncResult result) at System.Net.FixedSizeReader.ReadCallback(IAsyncResult transportResult) --- End of inner exception stack trace ---
at System.Net.Security.NegotiateStream.EndRead(IAsyncResult asyncResult) at System.Service...
06/25/2014 08:29:23.88* w3wp.exe (0x1A24)
0x1600 SharePoint Foundation
Service Connections
ev2x Verbose
...Model.Channels.StreamConnection.EndRead()</ExceptionString><InnerException><ExceptionType>System.TimeoutException, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</ExceptionType><Message>The
socket was aborted because an asynchronous receive from the socket did not complete within the allotted timeout of 00:01:00. The time allotted to this operation may have been a portion of a longer timeout.</Message><StackTrace> at System.Runtime.AsyncResult.End[TAsyncResult](IAsyncResult
result) at System.ServiceModel.Channels.ConnectionStream.ReadAsyncResult.End(IAsyncResult result) at System.Net.FixedSizeReader.ReadCallback(IAsyncResult transportResult)</StackTrace><ExceptionString>System.TimeoutException:
The socket was aborted because an asynchronous receive fr...
06/25/2014 08:29:23.88* w3wp.exe (0x1A24)
0x1600 SharePoint Foundation
Service Connections
ev2x Verbose
...om the socket did not complete within the allotted timeout of 00:01:00. The time allotted to this operation may have been a portion of a longer timeout. ---&gt; System.Net.Sockets.SocketException: The I/O operation has been aborted because
of either a thread exit or an application request at System.ServiceModel.Channels.SocketConnection.HandleReceiveAsyncCompleted() at System.ServiceModel.Channels.SocketConnection.OnReceiveAsync(Object sender, SocketAsyncEventArgs
eventArgs) --- End of inner exception stack trace --- at System.Runtime.AsyncResult.End[TAsyncResult](IAsyncResult result) at System.ServiceModel.Channels.ConnectionStream.ReadAsyncResult.End(IAsyncResult result)
at System.Net.FixedSizeReader.ReadCallback(IAsyncResult transportResult)</ExceptionString>...
06/25/2014 08:29:23.88* w3wp.exe (0x1A24)
0x1600 SharePoint Foundation
Service Connections
ev2x Verbose
...<InnerException><ExceptionType>System.Net.Sockets.SocketException, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</ExceptionType><Message>The I/O operation has been aborted because of either a thread
exit or an application request</Message><StackTrace> at System.ServiceModel.Channels.SocketConnection.HandleReceiveAsyncCompleted() at System.ServiceModel.Channels.SocketConnection.OnReceiveAsync(Object sender, SocketAsyncEventArgs
eventArgs)</StackTrace><ExceptionString>System.Net.Sockets.SocketException (0x80004005): The I/O operation has been aborted because of either a thread exit or an application request at System.ServiceModel.Channels.SocketConnection.HandleReceiveAsyncCompleted()
at System.ServiceModel.Channels.SocketConnection.OnReceiveAsync(Ob...
06/25/2014 08:29:23.88* w3wp.exe (0x1A24)
0x1600 SharePoint Foundation
Service Connections
ev2x Verbose
...ject sender, SocketAsyncEventArgs eventArgs)</ExceptionString><NativeErrorCode>3E3</NativeErrorCode></InnerException></InnerException></InnerException></Exception></TraceRecord>
06/25/2014 08:29:23.88 w3wp.exe (0x1A24)
0x1600 SharePoint Foundation
Service Connections
ev2x Verbose
System.ServiceModel Error: 131075 :
06/25/2014 08:29:23.88 w3wp.exe (0x1A24)
0x1600 SharePoint Foundation
Service Connections
ev2x Verbose
<TraceRecord xmlns="http://schemas.microsoft.com/2004/10/E2ETraceEvent/TraceRecord" Severity="Error"><TraceIdentifier>http://msdn.microsoft.com/en-US/library/System.ServiceModel.Diagnostics.ThrowingException.aspx</TraceIdentifier><Description>Throwing
an exception.</Description><AppDomain>/LM/W3SVC/2/ROOT/81d12ab944d94c29a629fae7508ad28b-1-130481510403888701</AppDomain><Exception><ExceptionType>System.TimeoutException, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</ExceptionType><Message>The
socket was aborted because an asynchronous receive from the socket did not complete within the allotted timeout of 00:01:00. The time allotted to this operation may have been a portion of a longer timeout.</Message><StackTrace> at System.ServiceModel.Channels.StreamConne...
06/25/2014 08:29:23.88* w3wp.exe (0x1A24)
0x1600 SharePoint Foundation
Service Connections
ev2x Verbose
...ction.EndRead() at System.ServiceModel.Channels.SessionConnectionReader.OnAsyncReadComplete(Object state)</StackTrace><ExceptionString>System.TimeoutException: The socket was aborted because an asynchronous receive from the
socket did not complete within the allotted timeout of 00:01:00. The time allotted to this operation may have been a portion of a longer timeout. ---&gt; System.IO.IOException: The read operation failed, see inner exception. ---&gt; System.TimeoutException:
The socket was aborted because an asynchronous receive from the socket did not complete within the allotted timeout of 00:01:00. The time allotted to this operation may have been a portion of a longer timeout. ---&gt; System.Net.Sockets.SocketException:
The I/O operation has been aborted because of ei...
06/25/2014 08:29:23.88* w3wp.exe (0x1A24)
0x1600 SharePoint Foundation
Service Connections
ev2x Verbose
...ther a thread exit or an application request at System.ServiceModel.Channels.SocketConnection.HandleReceiveAsyncCompleted() at System.ServiceModel.Channels.SocketConnection.OnReceiveAsync(Object sender, SocketAsyncEventArgs
eventArgs) --- End of inner exception stack trace --- at System.Runtime.AsyncResult.End[TAsyncResult](IAsyncResult result) at System.ServiceModel.Channels.ConnectionStream.ReadAsyncResult.End(IAsyncResult result)
at System.Net.FixedSizeReader.ReadCallback(IAsyncResult transportResult) --- End of inner exception stack trace --- at System.Net.Security.NegotiateStream.EndRead(IAsyncResult asyncResult) at System.ServiceModel.Channels.StreamConnection.EndRead()
--- End of inner exception stack trace --- at System.ServiceModel.Chann...
06/25/2014 08:29:23.88* w3wp.exe (0x1A24)
0x1600 SharePoint Foundation
Service Connections
ev2x Verbose
...els.StreamConnection.EndRead() at System.ServiceModel.Channels.SessionConnectionReader.OnAsyncReadComplete(Object state)</ExceptionString><InnerException><ExceptionType>System.IO.IOException, mscorlib, Version=4.0.0.0,
Culture=neutral, PublicKeyToken=b77a5c561934e089</ExceptionType><Message>The read operation failed, see inner exception.</Message><StackTrace> at System.Net.Security.NegotiateStream.EndRead(IAsyncResult asyncResult)
at System.ServiceModel.Channels.StreamConnection.EndRead()</StackTrace><ExceptionString>System.IO.IOException: The read operation failed, see inner exception. ---&gt; System.TimeoutException: The socket was aborted because an asynchronous
receive from the socket did not complete within the allotted timeout of 00:01:00. The time allotted to this oper...
06/25/2014 08:29:23.88* w3wp.exe (0x1A24)
0x1600 SharePoint Foundation
Service Connections
ev2x Verbose
...ation may have been a portion of a longer timeout. ---&gt; System.Net.Sockets.SocketException: The I/O operation has been aborted because of either a thread exit or an application request at System.ServiceModel.Channels.SocketConnection.HandleReceiveAsyncCompleted()
at System.ServiceModel.Channels.SocketConnection.OnReceiveAsync(Object sender, SocketAsyncEventArgs eventArgs) --- End of inner exception stack trace --- at System.Runtime.AsyncResult.End[TAsyncResult](IAsyncResult
result) at System.ServiceModel.Channels.ConnectionStream.ReadAsyncResult.End(IAsyncResult result) at System.Net.FixedSizeReader.ReadCallback(IAsyncResult transportResult) --- End of inner exception stack trace ---
at System.Net.Security.NegotiateStream.EndRead(IAsyncResult asyncRes...
06/25/2014 08:29:23.88* w3wp.exe (0x1A24)
0x1600 SharePoint Foundation
Service Connections
ev2x Verbose
...ult) at System.ServiceModel.Channels.StreamConnection.EndRead()</ExceptionString><InnerException><ExceptionType>System.TimeoutException, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</ExceptionType><Message>The
socket was aborted because an asynchronous receive from the socket did not complete within the allotted timeout of 00:01:00. The time allotted to this operation may have been a portion of a longer timeout.</Message><StackTrace> at System.Runtime.AsyncResult.End[TAsyncResult](IAsyncResult
result) at System.ServiceModel.Channels.ConnectionStream.ReadAsyncResult.End(IAsyncResult result) at System.Net.FixedSizeReader.ReadCallback(IAsyncResult transportResult)</StackTrace><ExceptionString>System.TimeoutException:
The socket was aborted because ...
06/25/2014 08:29:23.88* w3wp.exe (0x1A24)
0x1600 SharePoint Foundation
Service Connections
ev2x Verbose
...an asynchronous receive from the socket did not complete within the allotted timeout of 00:01:00. The time allotted to this operation may have been a portion of a longer timeout. ---&gt; System.Net.Sockets.SocketException: The I/O operation
has been aborted because of either a thread exit or an application request at System.ServiceModel.Channels.SocketConnection.HandleReceiveAsyncCompleted() at System.ServiceModel.Channels.SocketConnection.OnReceiveAsync(Object sender,
SocketAsyncEventArgs eventArgs) --- End of inner exception stack trace --- at System.Runtime.AsyncResult.End[TAsyncResult](IAsyncResult result) at System.ServiceModel.Channels.ConnectionStream.ReadAsyncResult.End(IAsyncResult
result) at System.Net.FixedSizeReader.ReadCallback(IAsyncResult transpor...
06/25/2014 08:29:23.88* w3wp.exe (0x1A24)
0x1600 SharePoint Foundation
Service Connections
ev2x Verbose
...tResult)</ExceptionString><InnerException><ExceptionType>System.Net.Sockets.SocketException, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</ExceptionType><Message>The I/O operation has been
aborted because of either a thread exit or an application request</Message><StackTrace> at System.ServiceModel.Channels.SocketConnection.HandleReceiveAsyncCompleted() at System.ServiceModel.Channels.SocketConnection.OnReceiveAsync(Object
sender, SocketAsyncEventArgs eventArgs)</StackTrace><ExceptionString>System.Net.Sockets.SocketException (0x80004005): The I/O operation has been aborted because of either a thread exit or an application request at System.ServiceModel.Channels.SocketConnection.HandleReceiveAsyncCompleted()
at System.ServiceModel.Channels.SocketCo...
06/25/2014 08:29:23.88* w3wp.exe (0x1A24)
0x1600 SharePoint Foundation
Service Connections
ev2x Verbose
...nnection.OnReceiveAsync(Object sender, SocketAsyncEventArgs eventArgs)</ExceptionString><NativeErrorCode>3E3</NativeErrorCode></InnerException></InnerException></InnerException></Exception></TraceRecord>
06/25/2014 08:29:23.88 w3wp.exe (0x2308)
0x20BC SharePoint Foundation
Monitoring
nasq Verbose
Entering monitored scope (SPFileStreamManager.GetStreamInfo). Parent SPSqlClient
183e9e9c-5ed6-e0aa-f49d-829231a7c856
06/25/2014 08:29:23.88 w3wp.exe (0x2308)
0x20BC SharePoint Foundation
Monitoring
b4ly Verbose
Regards
Ritu Raj
When you see answers and helpful posts,
please click Vote As Helpful, Propose As Answer, and/or Mark As AnswerProblem with distributed cache connection, Check below
http://www.dmcinfo.com/latest-thinking/blog/id/8657/fix-sharepoint-2013-distributed-cache-timeouts
http://habaneroconsulting.com/insights/SharePoint-2013-Distributed-Cache-Bug#.U6p506Nn01s
http://social.technet.microsoft.com/forums/sharepoint/en-US/fd3bca97-5d75-4a67-87ca-aac7bb5f6352/setup-spn-for-appfabric-distributed-cache-in-sharepoint-2013
http://social.msdn.microsoft.com/Forums/en-US/317ef084-1174-4c4e-8d23-d1c56bd0db73/sharepoint-2013-workflows-keep-crashing-due-to-distributed-logon-token-cache-timeouts-cache-keeps?forum=sharepointadmin
If this helped you resolve your issue, please mark it Answered -
Portal runtime error exception ID: error in init method
Hi Experts
I am getting the portal runtime error http://<fqdn>:<port>/irj/portal, can anybody suggest me what to do.
"Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 02:27_06/09/10_68650050"
Here is the log file
02:27_06/09/10_68650050
[EXCEPTION]
com.sapportals.portal.prt.component.PortalComponentException: Error in init method
Component : com.sap.netweaver.coll.appl.ui.room.CollaborationDetailedNavigation
at com.sapportals.portal.prt.component.PortalComponentContext.init(PortalComponentContext.java:251)
at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.refresh(PortalComponentContextItem.java:271)
at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.getContext(PortalComponentContextItem.java:316)
at com.sapportals.portal.prt.component.PortalComponentRequest.getComponentContext(PortalComponentRequest.java:387)
at com.sapportals.portal.pb.PageBuilder.createIviewProfile(PageBuilder.java:443)
at com.sapportals.portal.pb.PageBuilder.createiView(PageBuilder.java:391)
at com.sapportals.portal.pb.PageBuilder.createAndAddiViews(PageBuilder.java:233)
at com.sapportals.portal.pb.PageBuilder.doOnNodeReady(PageBuilder.java:635)
at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:388)
at com.sapportals.portal.pb.PageBuilder.handleEvent(PageBuilder.java:815)
at com.sapportals.portal.prt.component.CachablePortalComponent.handleEvent(CachablePortalComponent.java:703)
at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:252)
at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:368)
at com.sapportals.portal.prt.pom.AbstractNode.addChildNode(AbstractNode.java:340)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:642)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:235)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:523)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:412)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Caused by: com.sapportals.portal.prt.core.broker.PortalComponentInstantiationException: Could not instantiate implementation class com.sapportals.portal.navigation.CollaborationNavTree of Portal Component com.sap.netweaver.coll.appl.ui.room.CollaborationDetailedNavigation because: Could not instantiate implementation class
at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getInstanceInternal(PortalComponentItemFacade.java:269)
at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getComponentInstance(PortalComponentItemFacade.java:160)
at com.sapportals.portal.prt.core.broker.PortalComponentItem.getComponentInstance(PortalComponentItem.java:732)
at com.sapportals.portal.prt.component.PortalComponentContext.getComponent(PortalComponentContext.java:103)
at com.sapportals.portal.prt.component.PortalComponentContext.init(PortalComponentContext.java:242)
... 35 more
Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: [PortalApplicationItem._prepare]: com.sap.netweaver.coll.appl.ui.room
at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:427)
at com.sapportals.portal.prt.core.broker.PortalApplicationItem._refresh(PortalApplicationItem.java:507)
at com.sapportals.portal.prt.core.broker.PortalApplicationItem.getCoreLoader(PortalApplicationItem.java:1360)
at com.sapportals.portal.prt.core.broker.PortalComponentItem.getClassLoader(PortalComponentItem.java:569)
at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getClassLoader(PortalComponentItemFacade.java:102)
at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getInstanceInternal(PortalComponentItemFacade.java:228)
... 39 more
Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: [PortalApplicationItem._prepare]: com.sap.netweaver.bc.rf.service
at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:427)
at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:387)
... 44 more
Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception during start of application: SAPJ2EE::library:signature_lib
at com.sapportals.portal.prt.core.broker.SAPJ2EEApplicationItem.prepare(SAPJ2EEApplicationItem.java:323)
at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:387)
... 45 more
Caused by: com.sapportals.portal.prt.core.broker.SAPJ2EELibraryNotFoundException: Could not find Library SAPJ2EE::library:signature_lib
at com.sapportals.portal.prt.core.broker.SAPJ2EEApplicationItem.prepare(SAPJ2EEApplicationItem.java:277)
... 46 more. . .
Thanks in advance
UdayHi Tobias
Thanks for your response, i can able to access /nwa. The trace file while is posted got from /nwa.
I have restarted the portal. Can you please tell me where can we check the errors when portal started?
Thanks in advance
Uday -
I have a SSIS project that I am newly running on the SQL server (2005) . It was previously run on my PC. I am importing data from a DB2 server to the SQL server.
I am in the SA group on the server
My connection to DB2 works
When open the package and run it in preview mode, I can retrieve the data.
When I execute the package I get the below errors:
[MIDAS OLE DB Source [1]] Error: The AcquireConnection method call to the connection manager "NGMDSPA.alharris" failed with error code 0xC0202009.
[DTS.Pipeline] Error: component "MIDAS OLE DB Source" (1) failed validation and returned error code 0xC020801C.
What I have already done that has not worked:
The original Protection level was set to EncryptSensitiveWithPassword.
I have reset the Package Password.
I have set the protection level to DontSaveSensitive
I saved the package on the server and set a Package Password.
I created a new package, set the Protection level to DontSaveSensitive, set a package password in a configuration file using the Package Configuration Wizard.
Error continuesYes. The Drivers are installed and I have a successfull connection. I am trouble shooting the issue on the server in BIDS. I can connect to the DB2 server via the Connectionmanager. I can also preview the data in the OLE
DB source connection. Therefore I know that I have a proper connection
If you're setting option as DontSaveSensitive then you need to pass the connection information from configuration file/ config table. Otherwise it wont be able to use it for connecting to your source/destination servers. This is the recommended way as it
will enable you to change connection info at runtime.
If you want connection info to persist you need to use protection level as EncryptSensitiveUsingUserKey or EncryptSensitiveUsingPassword and set a password.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
Error calling a method of the tree control in BDC
I'm connecting two systems Iplan(project management tool) with SAP PS using SAP XI.
I've written an BDC(RFC) to assign people for the activity in an project(cj20n) it works fine in the foreground. But it doesn't work in the background.It doesn't give me error also.I've sap all authorization.
When I connect with XI its throwing me an error "Error calling a method of the tree control" message type A (using the same user to connect r3). I believe something we should do prior handling the tree control in a BDC. IF any body come across this situation please let me know. your help is appreciated.
Regards
AnandBDCs over enjoy transactions do not get along together. The containers and controls is more of a gui thing, and in background sometimes the BDC has a hard time with them. I would suggest using the non-enjoy tcode instead, CJ20.
Regards,
Rich Heilman -
How to Attach a Smartform to a BOR method
Hi Friends,
I had a query How to Attach a Smartform to BOR method.To attach a customized Smartform to a Customized BOR Object.Hi,
In the BOR object, create a method say display_SF. Now in the ABAP properties for that method give "OTHER" option.
Now in the BOR object, you can find the program which is used. Inside that program, You need to write the code to fetch the required data (ONLY BASIC REQUIRED DATA WILL BE ENOUGH) and call the smartform by passing all the print parameters and all the required data for that smartform.
Now inside the smartform, with imported required data, you can write all the logic and data fetch etc for the printouts.
The following sysntax can be used to fetch the required data into the method and can use to pass the same while calling the smartform.
SWC_GET_ELEMENT CONTAINER 'Plant' PLANT.
Regards,
Harish -
BDC - How we can identify errors in Transaction method?.
Hi ,
How we can identify errors in Transaction method?.
Regards
Nikhil V KumarHI
CALL TRANSACTION 'FK01' USING IT_BDCDATA MODE 'A'
UPDATE 'S'
MESSAGES INTO IT_MESSAGES.
IF SY-SUBRC <> 0.
PERFORM FORMAT_MESSAGES.
form FORMAT_MESSAGES .
DATA: L_MSG(100).
LOOP AT IT_MESSAGES.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = IT_MESSAGES-MSGID
LANG = SY-LANGU
NO = IT_MESSAGES-MSGNR
V1 = IT_MESSAGES-MSGV1
V2 = IT_MESSAGES-MSGV2
V3 = IT_MESSAGES-MSGV3
V4 = IT_MESSAGES-MSGV4
IMPORTING
MSG = L_MSG
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2
write:/ l_msg.
endloop.
endform. " FORMAT_MESSAGES
HOPE THIS HELPS,
PRIYA. -
SAP workflow -SAP error WL210 -Error triggering default method for object &
Hi Experts,
User is encountered with the error message "Error triggering default method for object &" when he is performing approval action in SES workitem .
Could you please advise me how to avoid this issue.
Thanks in advance for your valuable help.
Rajani
Edited by: Rajani SAPABAP on Sep 13, 2011 4:50 PMHi Rajani,
I think that it's an authorization issue.
Please check if u find which authorization object is violated in SU53.
Regards,
Asit -
ERROR TRIGGERING DEFAULT METHOD FOR OBJECT (INCOMING INVOICE).
When trying to open invoices in my ERP inbox to authorise I get the following message.
ERROR TRIGGERING DEFAULT METHOD FOR OBJECT (INCOMING INVOICE).
. There might be an authorisation issue. but i am not confirm.
I have checked the authorisation in SU53 also.
is it possible that there is some other reason for it.
If so then what are they?
please help.Hi Naval,
Is it a custom business object....make sure that the status of all object components are set to Implemented or released..and regenerate the Object...
Thanks
Srinivas
Maybe you are looking for
-
Display of Month and year in Y-axis of horizontal bar chart
Hi, We are using Webi XI R2 version. Could you please let me know how we can display date in chart. I am having objects as Month name (July, Aug etc) and year (2009). I want to display on the Y-axis as Jul-09, Aug-09 Please advise. Kindly let me kno
-
Trouble with Frame Size of AE Composition in Premiere CS6
I'm trying to add a name-bar (name-tag) from After Effects to my sequence in Premiere Pro. I built the name-tag in Illustrator according to the frame size in Premiere. All of my name tags for a 640x480 frame fit perfectly. However, the tags I built f
-
How to modify the database by Oracle-ridc-client
How to modify the database by Oracle-ridc-client
-
Customize appraisal notifications from the Self-Service HRMS
I have a requirement to customize some appraisal notifications from the Self-Service HRMS. I copied the HRSSA workflow, renamed it and changes some of the messages. I then went to AMS (Approval Management System) and changed the mandatory item WORKFL
-
XA transactions in ATMI java server
hello I've found out that XA support in Java ATMI servers (tuxedo12, patch level004, linux/x86_64) is limited to: ORACLEXA DERBYXA DB2XA SQLSERVERXA MYSQLXA. is there a documentation that describes list of Java/XA enabled databases? what about inform