Error in BPC 10 NW Master data attributes/text and hierarchy loading

Hi Experts
I have this Error
*MAPPING
NODENAME=*IF(NODENAME(1:3)=*STR(I00) then NODENAME; NODENAME(4:7))
HIER_NAME=HIER_NAME
PARENT=PARENT
ORDER=ORDER
*CONVERSION
ID=CF_NODENAME.XLS
ID=CF_PARENT.XLS
ID=CF_HIER_NAME.XLS
Regards

Hellow Bishwajit
In SAP BPC, we have created two hierarchy, I001 and I002, but in the moment of created the hierarchy in BPC, i have error, the I002 and I001 hierarchy does not exist in BPC.
I do not know what to do.
Regards

Similar Messages

Loading GL Master Data -- Attributes, Text, Hier ; and Transaction Data

Hi all,
Could any one give me the steps individually to load the following type of data in BI 7.0:
1. Master Data with Attributes
2. Master Data with Text
3. Master Data with Hierarchy
4. Transaction Data
Do I have to create the Transformation and DTP's individually to load all the above kind of Data?
Please give me the information as much as you can.
Thanks,

For master data when you create tranformation it will prompt infoobject to act as infoprovider, and then you create DTP to schedule data to it. It works fine with attribute and Texts, though hierarchy dosn;t support much features of 2004s at my side. Like i am not able to migrate Hierarchy datasource to 2004s, and even when i replicate it, it comes as 3.5 datasource only.
For transaction data follow Gokuls step, or try to find on forums you will get lot of discussion on it.

Master data, attributes, texts: ETL process

Hi,
I am new to SAP BW and have a question concerning the difference between master data attributes and texts. I am currently learning with the "sflight" example provided by SAP. There I have, e.g., a table like this:
CARRID CARRNAME          CURRCODE
AA      American Airline   USD
AB      Air Berlin         EUR
AC      Air Canada         CAD
These are my master data because these data won't change often - correct?
What are then my attributes and texts?
Thanks!

Thanks Choudhary.
I am Karthik, new to both, the community and SAP BI. I have a doubt similar to the main question, that goes like this.
CARRID CARRNAME          CURRCODE   TIME             COUNTRIES_OPERATION
AA          American Airline     USD               9:00 AM       America
AB          Air Berlin                EUR             10:00 AM       Germany
AC          Air Canada             CAD             11:00 AM       Canada
Similar to the above table, if suppose there are two other columns TIME and COUNTRIES_OPERATION,
1. Will TIME be included as "attributes" or "time characteristics" as TIME is an additional information of the master data key and there is dimension table where we can define TIME ?
2. Will COUNTRIES_OPERATION be included as "attributes" or can this be included in "hierarchy"
3. If not what can be used into "hierarchy" from the above table.
Kindly excuse if my question is silly or if it does not make sense. I am very new to these terms and still in the learning curve.
Thanking you in advance,
Karthik.

BPC 7.5 : Master Data Attribute mapping to PARENTH1

Hi,
I loaded G/L account master data attr/text and maintained some members manually. G/L account has the attribute G/L account group.
Can I populate the G/L account group data into PARENTH1 column? Please advise me whether it is possible or not.If it is possible please provide the steps.
Note : In ECC system G/L account hierarchy is not properly maintained.
Thanks
Prasad

Hi Nilanjan,
   Thanks for your inputs.
I'm working on BPC 7.5 and SP04.
I have G/L account hierarchy in BI system. I tried to load G/L account master data attr/text into BPC and successfully loaded but hierarchy node ID's and description are missed. I followed the below steps.
1) Loaded master attr,text and hierarchy data from ECC to BI and activated the master data.
2) Used the below transformation and conversion file.
3) Selected the hierarchy in selecetion in data package while loading data into BPC.
Transformation File:
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = TAB
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF = 177000
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT=
ROUNDAMOUNT=*MAPPING
*MAPPING
ID=ID
*CONVERSION
ID=ACCT_ID_MD.xls
G/L Account compounded to chart of accounts (10+4) and has total length 14 and hierarchy node ID's have length 32.
I used the below conversion file.
External                                                         Internal
01000000??????                               ??????
0100000???????                               ???????
010000????????                               ????????
0000000000000000000000000000????         ????
000000000000000000000000000?????         ?????
00000000000000000000000000??????         ??????
0000000000000000000000000???????         ???????
*                                                      js:%external%;
Please suggest anyone how can I load node ID's and description.
Note: I followed the same above process for 0PROFIT_CTR and 0COSTCETER and successfully loaded master, text and hierarchy data.
Thanks
Prasad

Master data medium text

Hi,
Master data medium text and long text is not appearing eventhough i checked Medium and long texts in the master data /texts tab page.Plz let me know the solution.
Thanks,
Sr

Hi,
Where is it not appearing...in the reports??
Just check the business explorer tab for this infoobject and see what is the text maintaned there...if it is short text then you will have to change it to long or medium...the way you want.
Check in the tables and do the mappings and load the data in these two fields...you will get an option to map them in trnasformation.
once loaded and activating the master data and making the settings in the business explorer...you should be able to see it in reports.
Thanks
Ajeet

Master data attributes declaration in update rules

Hi Everyone,
can any one tell me, How do we use attributes of master data in update rules..need syntax for using attributes of customer.... like comm_structure-/bic/......etc
post code is attribute of customer, How do I use it in update rule
thanks
Siri

Hi!
if you have customer as attribute in your Infosource and Postcode as acharecteristic in your data target then you just need to select ther 3rd type of update rule "MAster data attribute of" and specifxy 0Cusotomer beside
with regards
ashwin

Webi error for master data attributes if universe is on top of BI query

Hi All,
We are using BO XI R2 SP5 integrated with SAP BI 7.0.
We have built a universe on top of a BI query and when we try to build a web intelligence report that includes master data attributes like Customer City,Customer Region etc BO throws the following error:
Error 1:
Database error: [SOFA Driver] : Error getting members for hierarchy (level=ZFI_I03/ZFI_I03_Q0003, member=[ZFI_I03___F172], opcode=[ZFI_I03___F172]) . System error in program CL_RSDM_READ_MASTER_DATA and form VALUEREAD-02- (see long text). Contact your Business Objects administrator or database supplier for more information. (Error: WIS 10901)
For a universe built on a different BI query with master data attributes mentioned above,a different error occuring.
Error 2:
Your Web Intelligence session has timed out. Log out and log in again to InfoView. (Error: WIJ 77778)
We have tried:
1) We have executed the function module BAPI_MDPROVIDER_GET_DIMENSIONS with necessary inputs query/cube and we got correct output, like members, optional properties, selected properties and restrictions.But, still our problem remains same.
2) Transaction u201CRSRTu201D and executed the query,transaction RSRV to check SID-tables and the related masterdata.
Above steps we performed in response to SAP tickets 541052 / 2009,541131 / 2009 based on logs generated,but still the error persists.
What is working:
If a universe is built on top af an infocube directly, then there is no problem with master data attributes in webi report.
Please let us know if you need more details to help us resolve this issue.

Hi Naresh,
based on the MDX you can identify that those are navigational attributes and thats why the issue is not happening when talking to the cube directly because when you connect to the cube directly the navigational attributes are not available.
Take a look at note : 996197
not sure if it will solve the problem because there are other notes when you search for the error message but this was most of the times the one that resolved the issue.
the issue is in the BAPI functions
Ingo

Error while uploading master data attributes thru flat file

while uploading master data attributes thru flat file i am facing the below errow. can nyone let me know plz.
Error 8 when compiling the upload program: row 227, message: Data type /BIC/CCDEIO_MAT5_ATTR was found in a new

This just means that you changed the transfer rules/transfer structure and have not refreshed the workbench yet. The infopackage data hasn't been updated ... this is similar to a datasource update, where you need to replicate to make sure BW knows the latest version.
The best way to correct this error is to reload RSA1. Every time I make a change to the tr/ts, I always run /nrsa1 to refresh the workbench.
Brian

Error while loading to Master data attribute 0product

Hi experts,
While loading the data from 0material to 0product master data attribute i am getting a error ' 0MATERIAL : Data record 2421 (''300000072 '):Version '300000072 ' is not valid. I request u all to help me to solve this error.
Diagnosis
    Data record 2421 & with the key '300000072 &' is invalid in value
    '300000072 &' of the attribute/characteristic 0MATERIAL &.
System Response
    The system has recognized that the value mentioned above is invalid, and
    has processed this general error message. A subsequent message may give
    you more information on the error. This message refers to the same
    value, even though it does not state this explicitly.
Procedure
    If this message appears during a data load, maintain the attribute in
    the PSA maintenance screens. If this message appears in the master data
    maintenance screens, leave the transaction and call it again. This
    allows you to maintain your master data.
Please let me know what could be the problem....
Regards,
Prashanth
Edited by: Prashanth Shetty on Jul 16, 2008 7:42 AM

Hi,
   The issue is due to errorneous record.
Delete the request in Master data and Try the following.
1) Goto PSA --> filter the Status (Red or Green)
Select the Red records and correct the data in which error is throwm.
After correcting the data, save and Right click PSA and give Start update immediately.
2) Load via Infopackage only to PSA and later update from PSA and check.
Any one of the above 2 methods will solve the issue.
Regards,
Balaji V

Error when scheduling the infopackage for loading Master data attributes

Hi,
Iam getting the following error message when scheduling this Master data Attributes ZIP_0PLANT_ATTR_FULL..( Flexible update of Master data info objects)..
In Data load monitor error i got this following error message.
Error message when processing in the Business Warehouse
Diagnosis
An error occurred in the SAP BW when processing the data. The error is documented in an error message.
System response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Update rules
Thanks

HI,
A caller 01, 02 or equal to or greater than 20 contains an error meesage This is an Idoc error. Please check the Idocs :
1) SM37 job log (In source system if load is from R/3 or in BW if its a datamart load) (give request name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
Also see if there is any 'sysfail' for any datapacket in SM37.
2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. (In source system if load is from R/3 or in BW if its a datamart load). See if its accessing/updating some tables or is not doing anything at all.
3) RSMO see what is available in details tab. It may be in update rules.
4) ST22 check if any short dump has occured.(In source system if load is from R/3 or in BW if its a datamart load)
5) Check in SM58 and BD87 for pending tRFCs and IDOCS.
Once you identify you can rectify the error.
If all the records are in PSA you can pull it from the PSA to target. Else you may have to pull it again from source infoprovider.
If its running and if you are able to see it active in SM66 you can wait for some time to let it finish. You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
If you feel its active and running you can verify by checking if the number of records has increased in the data tables.
SM21 - System log can also be helpful.
Thanks,....
Shambhu

Error while creating Data Source for master data attributes

Hi BI Experts,
Well its been some time for me that I have been part of Extraction in BI.I primarily handled reporting in my last assignments.
I was trying extraction with flat files in SAP BI 7(new to sap bi 7 but very much familiar with BW3.5) but failed in the activity during master data attributes and text upload in infoobject (say IOSP_Mat).
Here is the procedure that I did after creation of characteristic IOSP_Mat.I created a source system for flat file followed by data source for Master data attributes, i selected all the parameters correctly.i.e. csv file format, data seperator as ,
and other settings, now when i am trying to look at the proposed data in the next tab using Load example data.its not showing the desired result.The columns that I have maintained in Flat File is MAT_NUMBER and MAT_NAME (with say 100 data in the file)
same is the result when I am trying to load the text data too columns maintained are
(LANGUAGE MAT_NUMBER Short Description)(same 100 data).
now i used to rsa1old transaction to upload the file using 3.5 version.i created info source for master data/text/hierarchies for IOSP_Mat
now when trying to upload it using info package for master and text data,I observe its(the data) not maintained in the characteristic IOSP_Mat.
When I monitored ,I figured the data has not been even uploaded to the PSA level.
Can you BI experts tell me the answer for this.
Thanks,
Srijith

apologies to all of you for late response,
was busy with some other activities.
I don't remember the exact message,but I remember it was not loaded to even the PSA level.I will try it again and post the exact message.
Thanks again for your quick response.
Once again sorry to all of you for my late response
Thanks,
Sri

Error when reading master data attribute in transformation

Hi All,
I have 0employee in source DSO and it is mapped to Cube transformation correctly.. There are other objects in cube which are the attribute of 0employee master... I map 0employee to these objects and in transformation i select read from master data then it throws up an error...
bold S:RSTRAN:556 39 0EMPLGROUP 01 Standard Group 0EMPLOYEE
Dont know why this error is popping up ...
Any pointers on this...
Thanks & Regards,
Anup
Edited by: Anup Chaudhari on Feb 20, 2012 1:29 PM
Edited by: Anup Chaudhari on Feb 20, 2012 1:30 PM

Hi,
This is a strange error that everybody faces but you can try this way.
1) select the target object Employee attribute in the transformation
2) assign the source field in the transformation. the source field should be 0EMPID
3) In this source field there is a coulmn called IOASSIGNMENT. Type 0EMPID at that point
4) change the rule type from direct assignment to master data attribute. Now you can select the field 0EMPID.
Regards,
Siva

Error in Master data attribute

Hi Gurus,
I Have got the following error while iam loading master data attribute
Data record 5238 & with the key '000000000030022055 &' is invalid i
value '4902430016629 &' of the attribute/characteristic 0EANUPC &.
Regards

Hi,
Please perform the data load with the option via PSA (in infopackage). Right click on data source- > manage. Click on the request and edit the record in error.
Hope this help. Let me know if you further queries.
Viren

Read error when reading the master data of 0EMPLOYEE on demand, attribute 0

Hello All,
While loading data for HR data source 0HR_PA_OS_1 i am getting the below error message..
Error 1 in update.
Read error when reading the master data of 0EMPLOYEE on demand, attribute 0COMP_CODE
Please let me know how can it be resolved.
Regards
Rohit Parti

The problem occurs during data load from R/3. It was not occuring before. When I go to check the PSA contents I get a runtime error - GETWA_NOT_ASSIGNED.
Error analysis
    You attempted to access an unassigned field symbol
    (data segment 32821).
This error may occur if
    - You address a typed field symbol before it has been set with
      ASSIGN
    - You address a field symbol that pointed to the line of an
      internal table that was deleted
    - You address a field symbol that was previously reset using
      UNASSIGN or that pointed to a local field that no
      longer exists
    - You address a global function interface, although the
      respective function module is not active - that is, is
      not in the list of active calls. The list of active calls
      can be taken from this short dump.

InfoProvider: infoObject (master data attribute and text)

I saw info Object of master data attribute and text in InfoProvider.
are infoObject act like a table when we do query on them.

Hi
Refer to this as down
Custome Infoobjects Tabels:
/BIC/M -- View of Master data Tables
/BIC/P -- Master data Table, Time Independent attributes
/BIC/Q -- Master data Table, Time Dependent attributes
/BIC/X -- SID Table, Time Independent
/BIC/Y -- SID Tabel, Time Dependent
/BIC/T -- Text Table
/BIC/H -- Heirarchy Table
/BIC/K -- Heirarchy SID Table
Standard Infoobjects Tabels(Buss. Content):
Replace "C" with "0" in above tables.
Ex: /BI0/M -- View of Master data Tables

Error in BPC 10 NW Master data attributes/text and hierarchy loading

Similar Messages

Maybe you are looking for