Error in BPC Load infoprovider Package after upgraded BPC NW 7 to 7.5

Hi,
We upgraded BPC netweaver 7 to version 7.5.When we are trying to load the data from BI cube to BPC cube by using Load Infoprovider Package we got error.Please find the Error details below
/CPMB/MODIFY completed in 0 seconds
/CPMB/INFOPROVIDER_CONVERT completed in 0 seconds
/CPMB/CLEAR completed in 0 seconds
Selection
InforProvide=ZBPC_IG
TRANSFORMATION= DATAMANAGER\TRANSFORMATIONFILES\INFOCUBE_DATA_TRANS.XLS
CLEARDATA= No
RUNLOGIC= Yes
CHECKLCK= Yes
Messages
Task name CONVERT:
No 1 Round:
Cannot find document/directory
Application: CONSOL_IGAAP Package status: ERROR
I request you to guide to clear the issue
Other information
1. We are currently working in BPC 7.5NW SP04.
2. The problem occured while validating data to be uploaded from
Infoprovider.
3. We required to upload data from BI Infoprovider (ZBPC_IG) to BPC
Application.
Thanks
Vikas

Thanx
We upgrade BPC NW SP04.... I check my transformation file its ok because same transformation file file working in production on BPC 7.0 NW.
Regards
Vikash

Similar Messages

Error in BPC Load infoprovider Package

Hi,
We upgraded BPC netweaver 7 to version 7.5.When we are trying to load the data from BI cube to BPC cube by using Load Infoprovider Package we got error.Please find the Error details below
/CPMB/MODIFY completed in 0 seconds
/CPMB/INFOPROVIDER_CONVERT completed in 0 seconds
/CPMB/CLEAR completed in 0 seconds
[Selection]
InforProvide=YBPC_C12
TRANSFORMATION= DATAMANAGER\TRANSFORMATIONFILES\Transformation.xls
CLEARDATA= No
RUNLOGIC= Yes
CHECKLCK= Yes
[Messages]
Task name CONVERT:
No 1 Round:
Cannot find document/directory
Application: CONSOLIDATION Package status: ERROR
I request you to guide to clear the issue
Thanks
Mahesh

Hi Mahesh,
Usually with loads from BI you don't need conversions, so i'd suggest you delete that reference to conversion file unless you have something in it.
If you put something in the conversion file that verify that this file located at the path you specified in your Transformation file.
Hope this helps.
Gersh

After upgrade BPC from 7.0 to 7.5 NW we facing issue in Legal consolidation

Hi
After upgrade BPC from 7.0 to 7.5 NW we facing issue in Legal consolidation where in case of equity knock off the amount is not get balanced even after we run legal consolidation package in group currency.
Regards
Vikash

Hi sandeep ,
Hence the problem was not there with previous versions where the .js files were simply not compressed by default.
Solution :
I believe switching off javascript compression is a suitable option in this case as the script files are usually cached by the browser as well and will not be transmitted every time.
Kindly follow these steps:
1. Enter the J2EE Config tool.
2. drill down: Global Server Configuration->services->http
3. on the right hand side, click on NeverCompressed
4. on the bottom, add at the end: ,*.js
5. Apply the changes
6. restart the J2EE.
After this clear the browser cache and then log onto the portal and check if the issue gets resolve
I hope it will useful to you.
Thanks@ Re grads
G.srinu

An unknown error occurred (-42110) when opening itunes after upgrading

when opening itunes i get "an unknown error occurred (-42110) when opening itunes after upgrading to latest version.

Try the following user tip:
iTunes for Windows 11.0.2.25 and 11.0.2.26: "Unknown error -42110" messages when launching iTunes

[S]Systemd can't start Load Kernel Modules after upgrade to Linux 4.0

After upgrading from linux 3.19.3-3 to 4.0.1-1 I've been having a bit of an issue. At that same time I upgraded readline (6.3.006-1 → 6.3.008-1), linux-firmware (20150206.17657c3-1 → 20150410.ec89525-1), nvidia (349.16-1 → 349.16-2) , wpa_suplican (2.4-1 → 1:2.3-1), and arpack (3.1.5-1 → 3.2.0-1). There may be some typos there since I'm copying by hand. Normally this wouldn't be much of a problem because I have been, priory to a few weeks ago, really good about back ups and would just roll my OS back 15 minutes. But things like that tend to fly out the window when the semester gets heavy. My last snapshot was on May 22nd, which I could still use, but would rather not. Also, it seems like a good idea to try to actual fix things for a change.
[edit] I should mention that this upgrade was run April 30th.[/edit]
When I finished booting the system after the upgrade, I got an error message during boot “systemd[1]: Failed to start Load Kernel Modules.” When it finished booting I run “dmesg -l err” to confirm that I'm not having a bad day dream or something. I'm also still seeing the errors that I described in this thread. Don't know if the two are related. I also noticed, when I was logging in, that it said that my stystem was still using the old kernel. Indeed, according to “uname -r” I'm still using 3.19.3-3-ARCH.
The closest thing to experience I have with this is when I forget to mount /boot before upgrading linux, so I made sure /boot was mounted and rand “sudo pacman -S linux” to reinstall, but this didn't help. Just to check I ran “ls /lib/modules” and see the directorys “4.0.1-1-ARCH” and “extramodules-4.0-ARCH” as I would expect after a succesful upgrade of the kernel.
Running “systemctl –failed, shows that in addition to systemd-modules-load.service, lm_sensors.service has also failed. I somehow expect lm_sensors depends on systemd-modules-load. I tried “systemctl restart systemd-modules-load”, but was rewarded with a message telling me that it failed. The “journalctl -xe” log has the lines
systemd[1]: system-modules-load[1799]: Failed to look up alias 'sg': Function not implemented
systemd[1]: system-modules-load[1799]: Failed to look up alias 'nfs': Function not implemented
Looking at the Wiki for Systemd under troubleshooting it actually has an example of trying to work through this exact issue. Following that I tried
journalctl _PID=1799
systemd[1]: system-modules-load[1799]: Failed to look up alias 'sg': Function not implemented
systemd[1]: system-modules-load[1799]: Failed to look up alias 'nfs': Function not implemented
which I already mentioned. At this point that bit of the Wiki stopped being useful.
Looking up on Google Failed to look up alias 'nfs': Function not implemented returned this thread from two years ago. Running “lsmod |grep sg” or $lsmod |grep nfs” returns nothing, but it also returns nothing on this laptop I'm using as well, so I don't imagine that is useful. Also, “# grep nfs /lib/modules/4.0.1-1-ARCH/modules.alias” returns a “Nosuch file or directory” error.
Searching for something on 'sg' turned up https://bbs.archlinux.org/viewtopic.php?id=165361, which was also not useful.
As a sort of last resort I tried https://wiki.archlinux.org/index.php/Do … the_kernel
I reboot and boot into my fallback installation, running 3.19.3-3, mount the partition with my main Arch on it, and arch-chroot into it.
I downgraded linux, and nvidia, exited chroot, and rebooted hoping to the Great Bacon that I didn't do anything too damaging. After all, my back ups are more than a week out of date.
This worked. I'm still getting those annyoing (they are only annoying right?) error messages I mentioned earlier. My system seems fine, if somewhat out of date.
Still, the question remains, “why did that happen, and how do I actually fix it?”
[edit2=solution]
There were two problems. First, my grub.cfg entry was pointing to the wrong UUID. I fixed this by regenerating it. Then I noticed the UUID in the grub menu itself (during the boot prosses) did not match what was in grub.cfg. To fix this I reinstalled grub.
Last edited by nstgc (2015-05-05 12:07:30)

Well, I took snapshots, not back ups but they work well enough for this, and rsynced /boot/ to where it use to be, moved/renamed the subvolume boot, and commented out the appropriate line in fstab. I also deleted that other /boot from before. I unmount /boot, and regenerate my grub.cfg. If my machine still boots, I'll try for an upgrade.
grub.cfg now looks like
# DO NOT EDIT THIS FILE
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod part_msdos
insmod part_msdos
insmod btrfs
set root='hd4,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos1 --hint-efi=hd4,msdos1 --hint-baremetal=ahci4,msdos1 --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 --hint-bios=hd5,msdos4 --hint-efi=hd5,msdos4 --hint-baremetal=ahci5,msdos4 3873d8ba-9472-4d92-ab0d-e94574bd0eae
else
search --no-floppy --fs-uuid --set=root 3873d8ba-9472-4d92-ab0d-e94574bd0eae
fi
font="/arch/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_input console
terminal_output gfxterm
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=5
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=5
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch Linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-3873d8ba-9472-4d92-ab0d-e94574bd0eae' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod part_msdos
insmod part_msdos
insmod btrfs
set root='hd4,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos1 --hint-efi=hd4,msdos1 --hint-baremetal=ahci4,msdos1 --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 --hint-bios=hd5,msdos4 --hint-efi=hd5,msdos4 --hint-baremetal=ahci5,msdos4 3873d8ba-9472-4d92-ab0d-e94574bd0eae
else
search --no-floppy --fs-uuid --set=root 3873d8ba-9472-4d92-ab0d-e94574bd0eae
fi
echo 'Loading Linux linux ...'
linux /arch/boot/vmlinuz-linux root=UUID=3873d8ba-9472-4d92-ab0d-e94574bd0eae rw rootflags=subvol=arch quiet
echo 'Loading initial ramdisk ...'
initrd /arch/boot/intel-ucode.img /arch/boot/initramfs-linux.img
submenu 'Advanced options for Arch Linux' $menuentry_id_option 'gnulinux-advanced-3873d8ba-9472-4d92-ab0d-e94574bd0eae' {
menuentry 'Arch Linux, with Linux linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-advanced-3873d8ba-9472-4d92-ab0d-e94574bd0eae' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod part_msdos
insmod part_msdos
insmod btrfs
set root='hd4,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos1 --hint-efi=hd4,msdos1 --hint-baremetal=ahci4,msdos1 --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 --hint-bios=hd5,msdos4 --hint-efi=hd5,msdos4 --hint-baremetal=ahci5,msdos4 3873d8ba-9472-4d92-ab0d-e94574bd0eae
else
search --no-floppy --fs-uuid --set=root 3873d8ba-9472-4d92-ab0d-e94574bd0eae
fi
echo 'Loading Linux linux ...'
linux /arch/boot/vmlinuz-linux root=UUID=3873d8ba-9472-4d92-ab0d-e94574bd0eae rw rootflags=subvol=arch quiet
echo 'Loading initial ramdisk ...'
initrd /arch/boot/intel-ucode.img /arch/boot/initramfs-linux.img
menuentry 'Arch Linux, with Linux linux (fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-fallback-3873d8ba-9472-4d92-ab0d-e94574bd0eae' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod part_msdos
insmod part_msdos
insmod btrfs
set root='hd4,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos1 --hint-efi=hd4,msdos1 --hint-baremetal=ahci4,msdos1 --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 --hint-bios=hd5,msdos4 --hint-efi=hd5,msdos4 --hint-baremetal=ahci5,msdos4 3873d8ba-9472-4d92-ab0d-e94574bd0eae
else
search --no-floppy --fs-uuid --set=root 3873d8ba-9472-4d92-ab0d-e94574bd0eae
fi
echo 'Loading Linux linux ...'
linux /arch/boot/vmlinuz-linux root=UUID=3873d8ba-9472-4d92-ab0d-e94574bd0eae rw rootflags=subvol=arch quiet
echo 'Loading initial ramdisk ...'
initrd /arch/boot/intel-ucode.img /arch/boot/initramfs-linux-fallback.img
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Vista (loader) (on /dev/sdd2)' --class windows --class os $menuentry_id_option 'osprober-chain-30F403F0F403B75E' {
insmod part_gpt
insmod ntfs
set root='hd3,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd3,gpt2 --hint-efi=hd3,gpt2 --hint-baremetal=ahci3,gpt2 30F403F0F403B75E
else
search --no-floppy --fs-uuid --set=root 30F403F0F403B75E
fi
chainloader +1
menuentry 'Windows Vista (loader) (on /dev/sdd4)' --class windows --class os $menuentry_id_option 'osprober-chain-FE2648382647EFE7' {
insmod part_gpt
insmod ntfs
set root='hd3,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd3,gpt4 --hint-efi=hd3,gpt4 --hint-baremetal=ahci3,gpt4 FE2648382647EFE7
else
search --no-floppy --fs-uuid --set=root FE2648382647EFE7
fi
chainloader +1
menuentry 'Arch (on /dev/sdd5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd' {
insmod part_gpt
insmod ext2
set root='hd3,gpt5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd3,gpt5 --hint-efi=hd3,gpt5 --hint-baremetal=ahci3,gpt5 832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd
else
search --no-floppy --fs-uuid --set=root 832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd
fi
linux /boot/vmlinuz-linux root=/dev/sdd5
initrd /boot/initramfs-linux.img
submenu 'Advanced options for Arch (on /dev/sdd5)' $menuentry_id_option 'osprober-gnulinux-advanced-832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd' {
menuentry 'Arch (on /dev/sdd5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-linux--832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd' {
insmod part_gpt
insmod ext2
set root='hd3,gpt5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd3,gpt5 --hint-efi=hd3,gpt5 --hint-baremetal=ahci3,gpt5 832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd
else
search --no-floppy --fs-uuid --set=root 832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd
fi
linux /boot/vmlinuz-linux root=/dev/sdd5
initrd /boot/initramfs-linux.img
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
### BEGIN /etc/grub.d/60_memtest86+ ###
if [ "${grub_platform}" == "pc" ]; then
menuentry "Memory Tester (memtest86+)" --class memtest86 --class gnu --class tool {
search --fs-uuid --no-floppy --set=root --hint-bios=hd4,msdos1 --hint-efi=hd4,msdos1 --hint-baremetal=ahci4,msdos1 --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 --hint-bios=hd5,msdos4 --hint-efi=hd5,msdos4 --hint-baremetal=ahci5,msdos4 3873d8ba-9472-4d92-ab0d-e94574bd0eae
linux16 /arch/boot/memtest86+/memtest.bin
fi
### END /etc/grub.d/60_memtest86+ ###
It seems as if the lines you mentioned, Scimmia, have changed. I'll take that as a good sign.
[edit] System still boots. Trying for the upgrade.
[edit2] Still can't use Linux 4.0. I'm getting the same errors as before.
[edit3] Successfully downgraded.
[edit4] I looked through /etc/mkinitcpio.conf and there isn't anything in there that isn't in my laptop's. I don't know if this will help, but here is the output of "pacman -Q"
a52dec 0.7.4-8
aalib 1.4rc5-10
abs 2.4.4-2
accountsservice 0.6.40-1
acl 2.2.52-2
adobe-source-han-sans-jp-fonts 1.002-1
adwaita-icon-theme 3.16.0-1
alsa-lib 1.0.29-1
alsa-plugins 1.0.29-2
alsa-utils 1.0.29-1
alsi 0.4.7-1
arch-install-scripts 15-1
arch-wiki-docs 20150219-1
arch-wiki-lite 20150219-2
archlinux-keyring 20150212-1
arpack 3.2.0-1
aspell 0.60.6.1-2
asunder 2.7-1
at-spi2-atk 2.16.0-1
at-spi2-core 2.16.0-1
atk 2.16.0-1
atkmm 2.22.7-1
attr 2.4.47-1
autoconf 2.69-2
automake 1.15-1
avahi 0.6.31-15
awesome 3.5.6-1
bash 4.3.033-1
bash-completion 2.1-5
bc 1.06.95-1
bcache-tools 1.0.8-1
bigpkg 0.4.0-2
binutils 2.25-2
bison 3.0.4-1
blas 3.5.0-1
bluez 5.30-1
bluez-libs 5.30-1
bonnie++ 1.97-1
boost 1.58.0-1
boost-libs 1.58.0-1
btrfs-progs 3.19.1-1
bullet 2.82-1
bzip2 1.0.6-5
ca-certificates 20150402-1
ca-certificates-cacert 20140824-2
ca-certificates-mozilla 3.18-3
ca-certificates-utils 20150402-1
cabextract 1.4-3
cairo 1.14.2-1
cairo-clock 0.3.4-4
cairo-dock 3.4.1-1
cairo-dock-plug-ins 3.4.1-1
cairomm 1.10.0-3
calibre 2.27.0-1
cantarell-fonts 0.0.16-2
caribou 0.4.18.1-1
cddb-py 1.4-7
cdparanoia 10.2-5
cdrdao 1.2.3-7
cdrtools 3.01a28-1
celt 0.11.3-2
cfv 1.18.3-6
cheese 3.16.1-1
chmlib 0.40-4
chromaprint 1.1-2
chromium 42.0.2311.135-1
chromium-pepper-flash 1:17.0.0.169-3
cifs-utils 6.4-1
cinnamon-desktop 2.4.2-1
cinnamon-translations 2.4.4-1
clementine 1.2.3-5
clucene 2.3.3.4-8
clutter 1.22.0-2
clutter-gst2 2.0.14-1
clutter-gtk 1.6.0-2
cmus 2.6.0-4
cogl 1.20.0-1
colord 1.2.9-2
colord-gtk 0.1.26-2
compositeproto 0.4.2-3
confuse 2.7-3
coreutils 8.23-1
cracklib 2.9.4-1
cryptsetup 1.6.6-1
cups 2.0.2-4
cups-filters 1.0.68-1
cups-pk-helper 0.2.5-1
curl 7.42.0-1
damageproto 1.2.1-3
db 5.3.28-2
dbus 1.8.16-2
dbus-glib 0.102-2
dconf 0.24.0-1
desktop-file-utils 0.22-1
device-mapper 2.02.116-1
dhclient 4.3.2-1
dhcpcd 6.8.1-1
dia 0.97.3-1
dialog 1:1.2_20150225-1
dictd 1.12.1-4
diffutils 3.3-2
ding-libs 0.4.0-3
djvulibre 3.5.27-1
dnssec-anchors 20150403-1
dotconf 1.3-4
dri2proto 2.8-2
dri3proto 1.0-1
dvd+rw-tools 7.1-5
dvdisaster 0.72.6-1
e2fsprogs 1.42.12-2
ecryptfs-utils 106-1
ed 1.11-1
efl 1.13.2-1
elementary 1.13.2-1
elfutils 0.161-3
enca 1.16-1
enchant 1.6.0-5
enlightenment 0.19.4-1
evas_generic_loaders 1.13.2-1
evince 3.16.0-1
exempi 2.2.2-1
exfat-utils 1.1.1-1
exif-py 1.2.0-1
exiv2 0.24-1
expac 4-3
expat 2.1.0-4
extcalc 0.9.3_1-3
faac 1.28-5
faad2 2.7-4
fakeroot 1.20.2-1
fbreader 0.99.4-4
ffmpeg 1:2.6.2-1
fftw 3.3.4-1
file 5.22-1
file-roller 3.16.1-1
filesystem 2015.02-1
findutils 4.4.2-6
firefox 37.0.2-1
fixesproto 5.0-3
flac 1.3.1-1
flashplugin 11.2.202.457-1
flex 2.5.39-1
fltk 1.3.3-4
fluidsynth 1.1.6-4
fontconfig 2.11.1-1
fontsproto 2.1.3-1
foomatic-db 3:20150308-1
foomatic-db-engine 3:20150308-1
freetype2 2.5.5-1
fribidi 0.19.6-2
fsarchiver 0.6.19-1
fuse 2.9.3-2
fuse-exfat 1.1.0-1
gawk 4.1.2-1
gc 7.4.2-2
gcc-fortran 4.9.2-4
gcc-libs-multilib 4.9.2-4
gcc-multilib 4.9.2-4
gconf 3.2.6-3
gcr 3.15.92-1
gd 2.1.1-2
gdb 7.9-1
gdbm 1.11-1
gdk-pixbuf2 2.31.3-1
geany 1.24.1-1
gemrb 0.8.2-1
geoclue 0.12.99-2
geoclue2 2.2.0-2
geocode-glib 3.16.0-1
gettext 0.19.4-1
ghostscript 9.16-1
giflib 5.1.1-1
git 2.3.7-1
gjs 1.43.3-1
glew 1.12.0-1
glib-networking 2.44.0-2
glib2 2.44.0-1
glibc 2.21-3
glibmm 2.44.0-1
glproto 1.4.17-1
glu 9.0.0-3
gmime 2.6.20-2
gmp 6.0.0-2
gnome-bluetooth 3.16.1-1
gnome-color-manager 3.16.0-1
gnome-control-center 3.16.1-2
gnome-desktop 1:3.16.1-1
gnome-dictionary 3.16.1-1
gnome-disk-utility 3.16.0-1
gnome-menus 3.13.3-1
gnome-online-accounts 3.16.0-2
gnome-session 3.16.0-1
gnome-settings-daemon 3.16.1-1
gnome-shell 3.16.1-2
gnome-shell-extensions 3.16.1-1
gnome-system-monitor 3.16.0-1
gnome-themes-standard 3.16.0-1
gnome-tweak-tool 3.16.1-1
gnome-video-effects 0.4.1-1
gnupg 2.1.3-3
gnuplot 5.0.0-2
gnutls 3.4.0-1
gobject-introspection 1.44.0-1
gobject-introspection-runtime 1.44.0-1
google-chrome 42.0.2311.135-1
gparted 0.22.0-1
gpgme 1.5.4-1
gpm 1.20.7-4
graphite 1:1.2.4-1
grep 2.21-2
grilo 0.2.12-1
groff 1.22.3-3
grsync 1.2.5-1
grub 1:2.02.beta2-5
gsettings-desktop-schemas 3.16.1-1
gsfonts 20150122-1
gsm 1.0.13-8
gssproxy 0.4.1-1
gst-libav 1.4.5-1
gst-plugins-bad 1.4.5-2
gst-plugins-base 1.4.5-1
gst-plugins-base-libs 1.4.5-1
gst-plugins-good 1.4.5-2
gst-plugins-ugly 1.4.5-2
gstreamer 1.4.5-1
gstreamer0.10 0.10.36-4
gstreamer0.10-base 0.10.36-3
gstreamer0.10-base-plugins 0.10.36-3
gstreamer0.10-good 0.10.31-6
gstreamer0.10-good-plugins 0.10.31-6
gstreamer0.10-python 0.10.22-2
gstreamer0.10-ugly 0.10.19-14
gstreamer0.10-ugly-plugins 0.10.19-14
gthumb 3.4.0-1
gtk-update-icon-cache 2.24.27-1
gtk2 2.24.27-1
gtk3 3.16.2-1
gtkmm 2.24.4-1
gtkmm3 3.16.0-1
guile 2.0.11-2
gvfs 1.24.1-1
gvfs-mtp 1.24.1-1
gzip 1.6-1
hal-info 0.20091130-2
harfbuzz 0.9.40-2
harfbuzz-icu 0.9.40-2
haveged 1.9.1-2
hdparm 9.45-1
hdsentinel 0.8-2
help2man 1.46.4-1
hicolor-icon-theme 0.13-1
hplip 3.15.4-1
hspell 1.2-2
htmlcxx 0.85-4
htop 1.0.3-2
hunspell 1.3.3-1
hwids 20150129-1
hwinfo 21.10.1.1-1
hwloc 1.10.1-1
hyphen 2.8.8-1
i3-wm 4.10.2-1
i3lock 2.6-1
i3status 2.9-1
i7z 0.27.2.git1-1
iana-etc 2.30-4
icedtea-web 1.5.2-1
icu 55.1-1
imagemagick 6.9.1.0-1
imagewriter 1.10.1420800585.134a9b3-1
imlib2 1.4.7-1
inetutils 1.9.2-2
innoextract 1.4-0
inputproto 2.3.1-1
intel-tbb 4.3_20150209-1
intel-ucode 20150121-1
inxi 2.2.19-1
iproute2 3.19.0-1
iptables 1.4.21-3
iputils 20121221-3
ipython 3.1.0-1
iso-codes 3.57-1
jack 0.124.1-3
jansson 2.7-1
jasper 1.900.1-13
java-environment-common 2-2
java-runtime-common 2-2
jdk7-openjdk 7.u79_2.5.5-1
jfsutils 1.1.15-4
jmtpfs 0.5-1
jre7-openjdk 7.u79_2.5.5-1
jre7-openjdk-headless 7.u79_2.5.5-1
js 24.2.0-1
js17 17.0.0-1
json-c 0.12-2
json-glib 1.0.2-1
jsoncpp 1.4.4-1
julia 2:0.3.7-1
julia-docs 2:0.3.7-1
kbd 2.0.2-1
kbproto 1.0.7-1
keyutils 1.5.9-1
kmod 20-1
krb5 1.13.1-1
kvirc 4.2.0-4
lame 3.99.5-2
lapack 3.5.0-1
lcms 1.19-5
lcms2 2.6-1
ldb 1.1.20-1
ldns 1.6.17-2
less 471-1
lgogdownloader-git 20150310-1
lib32-acl 2.2.52-2
lib32-alsa-lib 1.0.29-1
lib32-alsa-plugins 1.0.29-2
lib32-atk 2.16.0-1
lib32-attr 2.4.47-1
lib32-bzip2 1.0.6-2
lib32-cairo 1.14.2-1
lib32-curl 7.41.0-1
lib32-db 5.3.28-2
lib32-e2fsprogs 1.42.12-1
lib32-elfutils 0.161-2
lib32-expat 2.1.0-2
lib32-fakeroot 1.20.2-1
lib32-flac 1.3.1-1
lib32-flashplugin 11.2.202.457-1
lib32-fontconfig 2.11.1-1
lib32-freetype2 2.5.5-1
lib32-gcc-libs 4.9.2-4
lib32-gdk-pixbuf2 2.31.3-2
lib32-gettext 0.19.4-1
lib32-giflib 5.1.1-1
lib32-glew 1.12.0-1
lib32-glib2 2.44.0-1
lib32-glibc 2.21-2
lib32-glu 9.0.0-2
lib32-gmp 6.0.0-1
lib32-gnutls 3.4.0-2
lib32-gsm 1.0.13-9
lib32-gtk2 2.24.27-1
lib32-harfbuzz 0.9.40-2
lib32-icu 55.1-1
lib32-jack 0.124.1-1
lib32-json-c 0.12-1
lib32-keyutils 1.5.9-1
lib32-krb5 1.13.1-1
lib32-lcms2 2.6-1
lib32-libaio 0.3.110-1
lib32-libasyncns 0.8-7
lib32-libcanberra 0.30-4
lib32-libcap 2.24-1
lib32-libcl 1.1-1
lib32-libcups 2.0.2-2
lib32-libdbus 1.8.16-1
lib32-libdrm 2.4.60-1
lib32-libffi 3.2.1-1
lib32-libgcrypt 1.6.3-1
lib32-libgpg-error 1.18-1
lib32-libice 1.0.9-1
lib32-libidn 1.30-1
lib32-libjpeg-turbo 1.4.0-1
lib32-libldap 2.4.40-1
lib32-libltdl 2.4.5-1
lib32-libnl 3.2.25-1
lib32-libogg 1.3.2-1
lib32-libpcap 1.6.2-1
lib32-libpciaccess 0.13.4-1
lib32-libpng 1.6.16-1
lib32-libpulse 6.0-1
lib32-libsamplerate 0.1.8-2
lib32-libsm 1.2.2-1
lib32-libsndfile 1.0.25-3
lib32-libssh2 1.5.0-1
lib32-libtasn1 4.4-1
lib32-libtiff 4.0.3-3
lib32-libtxc_dxtn 1.0.1-5
lib32-libusb 1.0.19-1
lib32-libvorbis 1.3.5-1
lib32-libx11 1.6.3-1
lib32-libxau 1.0.8-1
lib32-libxcb 1.11-1
lib32-libxcomposite 0.4.4-2
lib32-libxcursor 1.1.14-1
lib32-libxdamage 1.1.4-2
lib32-libxdmcp 1.1.2-1
lib32-libxext 1.3.3-1
lib32-libxfixes 5.0.1-1
lib32-libxft 2.3.2-1
lib32-libxi 1.7.4-1
lib32-libxinerama 1.1.3-1
lib32-libxml2 2.9.2-1
lib32-libxmu 1.1.2-1
lib32-libxrandr 1.4.2-1
lib32-libxrender 0.9.8-1
lib32-libxshmfence 1.2-1
lib32-libxslt 1.1.28-2
lib32-libxt 1.1.4-1
lib32-libxtst 1.2.2-1
lib32-libxxf86vm 1.1.4-1
lib32-llvm-libs 3.6.0-1
lib32-mesa 10.5.4-1
lib32-mpg123 1.22.1-1
lib32-ncurses 5.9-3
lib32-nettle 3.1.1-1
lib32-nspr 4.10.8-1
lib32-nss 3.18-1
lib32-nvidia-libgl 349.16-1
lib32-nvidia-utils 349.16-1
lib32-openal 1.16.0-1
lib32-openssl 1.0.2.a-1
lib32-p11-kit 0.23.1-2
lib32-pango 1.36.8-1
lib32-pcre 8.36-1
lib32-pixman 0.32.6-1
lib32-portaudio 19_20140130-1
lib32-readline 6.3.008-1
lib32-sdl 1.2.15-6
lib32-soundtouch 1.8.0-1
lib32-sqlite 3.8.9-1
lib32-systemd 219-1
lib32-tdb 1.3.4-1
lib32-util-linux 2.26.1-1
lib32-v4l-utils 1.6.0-1
lib32-wayland 1.7.0-1
lib32-wxgtk 3.0.2-4
lib32-xz 5.2.1-1
lib32-zlib 1.2.8-1
libabw 0.1.1-1
libaio 0.3.110-1
libao 1.2.0-1
libarchive 3.1.2-8
libart-lgpl 2.3.21-3
libass 0.12.1-1
libassuan 2.2.0-1
libasyncns 0.8-5
libatasmart 0.19-3
libatomic_ops 7.4.2-1
libavc1394 0.5.4-2
libbluray 0.8.0-1
libbsd 0.7.0-1
libcaca 0.99.beta18-2
libcanberra 0.30-5
libcanberra-pulse 0.30-5
libcap 2.24-2
libcap-ng 0.7.4-1
libcddb 1.3.2-4
libcdio 0.93-1
libcdio-paranoia 10.2+0.93+1-1
libcdr 0.1.1-2
libcl 1.1-4
libcroco 0.6.8-2
libcue 1.4.0-4
libcups 2.0.2-4
libdaemon 0.14-3
libdatrie 0.2.8-1
libdbus 1.8.16-2
libdca 0.0.5-4
libdrm 2.4.60-2
libdv 1.0.0-6
libdvbpsi 1:1.1.2-1
libdvdcss 1.3.0-1
libdvdnav 5.0.2-1
libdvdread 5.0.1-1
libe-book 0.1.2-2
libebml 1.3.1-1
libedit 20150325_3.1-1
libepoxy 1.2-2
libetonyek 0.1.1-1
libev 4.19-1
libevdev 1.4.2-1
libevent 2.0.22-1
libexif 0.6.21-2
libffi 3.2.1-1
libfontenc 1.1.3-1
libftdi-compat 0.20-1
libgcrypt 1.6.3-2
libgcrypt15 1.5.4-4
libgdm 3.16.1.1-1
libgee 0.18.0-1
libglade 2.6.4-5
libgme 0.6.0-3
libgnome-keyring 3.12.0-2
libgnomekbd 3.6.0-2
libgpg-error 1.19-1
libgpod 0.8.3-4
libgssglue 0.4-2
libgsystem 2015.1-1
libgtop 2.30.0-1
libgusb 0.2.4-1
libgweather 3.16.1-1
libgxps 0.2.2-3
libibus 1.5.10-1
libical 1.0.1-2
libice 1.0.9-1
libid3tag 0.15.1b-8
libidn 1.30-1
libiec61883 1.2.0-4
libimobiledevice 1.2.0-1
libinput 0.14.1-1
libirman 0.4.5-4
libjpeg-turbo 1.4.0-1
libkate 0.4.1-5
libksba 1.3.3-1
liblastfm 1.0.9-1
libldap 2.4.40-2
liblqr 0.4.2-1
libmaa 1.3.2-2
libmad 0.15.1b-7
libmatroska 1.4.2-1
libmediainfo 0.7.73-1
libmikmod 3.3.7-1
libmm-glib 1.4.6-1
libmms 0.6.4-1
libmng 2.0.2-3
libmodplug 0.8.8.5-1
libmp4v2 2.0.0-3
libmpc 1.0.3-1
libmpcdec 1.2.6-4
libmpeg2 0.5.1-5
libmspub 0.1.2-2
libmtp 1.1.8-1
libmwaw 0.3.4-1
libmygpo-qt 1.0.8-1
libndp 1.4-1
libnewt 0.52.18-2
libnl 3.2.25-1
libnm-glib 1.0.0-2
libnotify 0.7.6-1
liboauth 1.0.3-1
libodfgen 0.1.3-1
libofa 0.9.3-5
libogg 1.3.2-1
libomxil-bellagio 0.9.3-1
libpagemaker 0.0.2-1
libpaper 1.1.24-7
libpcap 1.6.2-1
libpciaccess 0.13.4-1
libpipeline 1.4.0-1
libplist 1.12-1
libpng 1.6.16-1
libproxy 0.4.11-5
libpulse 6.0-1
libpwquality 1.2.3-1
libquvi 0.9.4-3
libquvi-scripts 0.9.20131130-2
libqzeitgeist 0.8.0-4
libraw 0.16.0-3
libraw1394 2.1.0-2
libreoffice-fresh 4.4.2-1
librevenge 0.0.2-1
librpcsecgss 0.19-8
librsvg 1:2.40.9-1
libsamplerate 0.1.8-3
libsasl 2.1.26-7
libseccomp 2.2.0-1
libsecret 0.18-1
libshout 1:2.3.1-2
libsidplay 1.36.59-6
libsigc++ 2.4.1-1
libsigsegv 2.10-2
libsm 1.2.2-2
libsndfile 1.0.25-3
libsodium 1.0.2-1
libsoup 2.50.0-1
libspectre 0.2.7-2
libsrtp 15.1c9bd90-3
libssh 0.6.5-1
libssh2 1.5.0-1
libsystemd 219-6
libtar 1.2.20-2
libtasn1 4.4-1
libteam 1.14-2
libthai 0.1.21-1
libtheora 1.1.1-3
libtiff 4.0.3-5
libtiger 0.3.4-4
libtirpc 0.2.5-1
libtool 2.4.6-1
libtxc_dxtn 1.0.1-6
libunibreak 1.1-1
libunistring 0.9.5-1
libunwind 1.1-2
libupnp 1.6.19-1
libusb 1.0.19-1
libusb-compat 0.1.5-1
libusbmuxd 1.0.10-1
libutempter 1.1.6-2
libutil-linux 2.26.1-3
libva 1.5.1-1
libvdpau 1.1-1
libvisio 0.1.1-2
libvisual 0.4.0-5
libvorbis 1.3.5-1
libvpx 1.4.0-2
libwacom 0.11-1
libwbclient 4.2.1-1
libwebp 0.4.3-1
libwmf 0.2.8.4-12
libwpd 0.10.0-1
libwpg 0.3.0-1
libwps 0.3.1-1
libx11 1.6.3-1
libx264 2:144.20150223-1
libx86 1.1-4
libx86emu 1.1.23.1-1
libxau 1.0.8-2
libxaw 1.0.13-1
libxcb 1.11-1
libxcomposite 0.4.4-2
libxcursor 1.1.14-2
libxdamage 1.1.4-2
libxdg-basedir 1.2.0-3
libxdmcp 1.1.2-1
libxext 1.3.3-1
libxfixes 5.0.1-1
libxfont 1.5.1-1
libxft 2.3.2-1
libxi 1.7.4-1
libxinerama 1.1.3-2
libxkbcommon 0.5.0-1
libxkbcommon-x11 0.5.0-1
libxkbfile 1.0.9-1
libxklavier 5.4-1
libxml2 2.9.2-2
libxmu 1.1.2-1
libxp 1.0.3-1
libxpm 3.5.11-1
libxrandr 1.4.2-2
libxrender 0.9.9-1
libxshmfence 1.2-1
libxslt 1.1.28-3
libxss 1.2.2-2
libxt 1.1.5-1
libxtst 1.2.2-1
libxv 1.0.10-1
libxvmc 1.0.9-1
libxxf86dga 1.1.4-1
libxxf86vm 1.1.4-1
libyaml 0.1.6-1
libzen 0.4.31-1
libzip 0.11.2-1
licenses 20140629-1
links 2.9-1
linux 3.19.3-3
linux-api-headers 3.18.5-1
linux-firmware 20150410.ec89525-1
lirc 1:0.9.2.a-1
llvm-libs 3.6.0-5
lm_sensors 3.3.5-1
logrotate 3.8.9-1
lpsolve 5.5.2.0-3
lrzip 0.621-1
lua 5.2.4-1
lua-bitop 1.0.2-5
lua-expat 1.3.0-1
lua-lgi 0.8.0-2
lua-socket 3.0rc1-4
lua51 5.1.5-4
luajit 2.0.3-3
lvm2 2.02.116-1
lxdream 0.9.1-3
lz4 128-1
lzo 2.09-1
m4 1.4.17-1
make 4.1-1
man-db 2.7.1-1
man-pages 3.83-1
mcomix 1.01-1
mcpp 2.7.2-5
mdadm 3.3.2-1
memtest86+ 5.01-1
mencoder 37379-3
mesa 10.5.4-1
metamorphose2 0.8.3-2
mime-types 9-1
minitube 2.4-1
mjpegtools 2.1.0-1
mkinitcpio 18-2
mkinitcpio-busybox 1.21.1-2
mkvtoolnix-cli 7.8.0-3
mobile-broadband-provider-info 20120614-2
morituri-git 0.2.3.r3.gb1d685f-1
mozilla-common 1.4-4
mpfr 3.1.2.p11-1
mpg123 1.22.1-1
mplayer 37379-3
mtdev 1.1.5-1
mutagen 1.28-1
mutter 3.16.1.1-1
ncurses 5.9-7
nemo 2.4.5-1
neon 0.30.1-1
net-snmp 5.7.3-1
netctl 1.10-2
nettle 3.1.1-1
network-manager-applet 1.0.0-2
networkmanager 1.0.0-2
nfs-utils 1.3.2-6
nfsidmap 0.26-1
nm-connection-editor 1.0.0-2
npth 1.2-1
nspr 4.10.8-1
nss 3.18-3
ntfs-3g 2015.3.14-1
nvidia 349.16-1
nvidia-libgl 349.16-1
nvidia-utils 349.16-1
ogmtools 1.5-5
openal 1.16.0-1
opencore-amr 0.1.3-2
openjpeg 1.5.2-1
openmpi 1.8.4-1
openresolv 3.6.1-1
openssh 6.8p1-2
openssl 1.0.2.a-1
opus 1.1-1
orc 0.4.23-1
os-prober 1.64-1
p11-kit 0.23.1-2
p7zip 9.38.1-3
package-query 1.5-2
pacman 4.2.1-1
pacman-mirrorlist 20150315-1
pacmatic 20150126-1
pam 1.1.8-5
pambase 20130928-1
pango 1.36.8-1
pangomm 2.36.0-1
par2cmdline-tbb 20141125-1
parallel 20150322-1
parted 3.2-2
patch 2.7.5-1
pciutils 3.3.1-1
pcmciautils 018-7
pcre 8.36-2
pcsx2-git 1.3.1.r978.1aebca3-1
perl 5.20.2-1
perl-clone 0.37-2
perl-data-dump 1.22-1
perl-dbi 1.633-1
perl-encode-locale 1.04-1
perl-error 0.17023-1
perl-file-basedir 0.07-1
perl-file-listing 6.04-2
perl-file-which 1.09-4
perl-html-parser 3.71-3
perl-html-tagset 3.20-4
perl-http-cookies 6.01-2
perl-http-daemon 6.01-2
perl-http-date 6.02-2
perl-http-message 6.06-2
perl-http-negotiate 6.01-2
perl-ipc-system-simple 1.25-1
perl-libwww 6.08-1
perl-locale-gettext 1.05-11
perl-lwp-mediatypes 6.02-2
perl-net-http 6.07-1
perl-uri 1.67-1
perl-www-robotrules 6.02-2
perl-xml-libxml 2.0121-1
perl-xml-namespacesupport 1.11-3
perl-xml-sax 0.99-4
perl-xml-sax-base 1.08-3
phonon-qt4 4.8.3-1
phonon-qt4-gstreamer 4.8.2-1
phoronix-test-suite 5.6.0-1
php 5.6.8-2
pinentry 0.9.1-1
pixman 0.32.6-1
pkg-config 0.28-2
pkgfile 15-1
pms 1.90.1-1
podofo 0.9.3-1
polkit 0.112-2
poppler 0.32.0-1
poppler-glib 0.32.0-1
poppler-qt5 0.32.0-1
popt 1.16-7
portaudio 19_20140130-1
presentproto 1.0-1
printproto 1.0.5-3
procps-ng 3.3.10-2
protobuf 2.6.1-1
psmisc 22.21-2
pth 2.0.7-5
pulseaudio 6.0-1
pulseaudio-alsa 2-3
pv 1.6.0-1
pygobject-devel 3.16.1-1
pygobject2-devel 2.28.6-11
pygtk 2.24.0-5
pyqt4-common 4.11.3-4
pyqt5-common 5.4.1-2
python 3.4.3-2
python-dateutil 2.4.1-1
python-dbus 1.2.0-4
python-dbus-common 1.2.0-4
python-gmpy2 2.0.5-2
python-gobject 3.16.1-1
python-html2text 2015.4.14-1
python-matplotlib 1.4.3-2
python-mpmath 0.19-1
python-nose 1.3.6-1
python-numexpr 2.4.3-1
python-numpy 1.9.2-2
python-pandas 0.16.0-2
python-pygments 2.0.2-2
python-pyparsing 2.0.3-1
python-pyqt4 4.11.3-4
python-pyqt5 5.4.1-2
python-pytz 2015.2-1
python-pyzmq 14.5.0-2
python-scipy 0.15.1-2
python-setuptools 1:15.2-1
python-sip 4.16.7-1
python-six 1.9.0-1
python-sympy 0.7.6-2
python-tornado 4.1.0-2
python-xdg 0.25-2
python2 2.7.9-1
python2-apsw 3.8.9-1
python2-atspi 2.16.0-1
python2-beaker 1.7.0-1
python2-cairo 1.10.0-2
python2-chardet 2.3.0-1
python2-cherrypy 3.6.0-1
python2-cssselect 0.9.1-2
python2-cssutils 1.0-2
python2-dateutil 2.4.1-1
python2-dbus 1.2.0-4
python2-dnspython 1.12.0-1
python2-gobject 3.16.1-1
python2-gobject2 2.28.6-11
python2-html5lib 0.999-5
python2-lxml 3.4.4-1
python2-mako 1.0.1-1
python2-markupsafe 0.23-2
python2-mechanize 0.2.5-4
python2-netifaces 0.10.4-1
python2-pillow 2.8.1-1
python2-psutil 2.2.1-2
python2-pycdio 0.20-3
python2-pygments 2.0.2-2
python2-pyqt5 5.4.1-2
python2-setuptools 1:15.2-1
python2-sip 4.16.7-1
python2-six 1.9.0-1
python2-xdg 0.25-2
qca 2.0.3-5
qca-ossl 2.0.0-7
qjson 0.8.1-3
qpdf 5.1.2-1
qt4 4.8.6-5
qt5-base 5.4.1-4
qt5-declarative 5.4.1-4
qt5-location 5.4.1-4
qt5-script 5.4.1-4
qt5-sensors 5.4.1-4
qt5-svg 5.4.1-4
qt5-tools 5.4.1-4
qt5-translations 5.4.1-4
qt5-webchannel 5.4.1-4
qt5-webkit 5.4.1-4
qt5-xmlpatterns 5.4.1-4
qtchooser 48-1
qtwebkit 2.3.4-1
randrproto 1.4.1-1
raptor 2.0.15-2
rasqal 1:0.9.32-1
readline 6.3.008-1
recode 3.6-8
recordproto 1.14.2-2
redland 1:1.0.17-2
reflector 2014.11-1
reiserfsprogs 3.6.24-1
renderproto 0.11.1-3
resourceproto 1.2.0-3
rest 0.7.93-1
rhash 1.3.3-1
rng-tools 5-3
rpcbind 0.2.3-1
rsync 3.1.1-2
rtkit 0.11-5
rtmpdump 20140918-2
ruby 2.2.2-1
s-nail 14.8.0-1
sbc 1.3-1
schroedinger 1.0.11-2
scrnsaverproto 1.2.2-2
sdcv 0.4.2-8
sdl 1.2.15-7
sdl_image 1.2.12-3
sdl_mixer 1.2.12-4
sdl_net 1.2.8-2
sdl_ttf 2.0.11-3
sed 4.2.2-3
sg3_utils 1.40-1
shadow 4.2.1-3
shared-color-targets 0.1.5-1
shared-mime-info 1.4-1
sip 4.16.7-1
slang 2.3.0-1
smartmontools 6.3-2
smbclient 4.2.1-1
smpeg 0.4.5-1
snappy 1.1.1-1
sound-theme-freedesktop 0.8-2
soundtouch 1.8.0-1
spandsp 0.0.6-1
speech-dispatcher 0.8.1-1
speedtest-cli 0.3.1-1
speex 1.2rc2-1
speexdsp 1.2rc3-1
spotify 0.9.17.1-1
spotify-gnome-git 20141010-1
sqlite 3.8.9-1
startup-notification 0.12-4
steam 1.0.0.49-3
sudo 1.8.13-1
suitesparse 4.4.4-1
sysfsutils 2.1.0-9
systemd 219-6
systemd-sysvcompat 219-6
t1lib 5.1.2-5
taglib 1.9.1-1
talloc 2.1.2-1
tar 1.28-1
tdb 1.3.4-1
telepathy-glib 0.24.1-1
telepathy-logger 0.8.1-1
telepathy-mission-control 5.16.3-1
terminology 0.8.0-1
tevent 0.9.24-1
texinfo 5.2-3
texlive-bin 2014.34260-7
texlive-core 2014.36709-1
texlive-langchinese 2014.35921-1
texlive-langcjk 2014.0-1
texlive-langjapanese 2014.36466-1
texlive-langkorean 2014.36573-1
texlive-latexextra 2014.36706-1
texlive-pictures 2014.36605-1
texlive-science 2014.36659-1
texmaker 4.4.1-1
thin-provisioning-tools 0.4.1-1
thunderbird 31.6.0-2
tinyxml 2.6.2-3
tmux 1.9_a-2
totem-plparser 3.10.4-1
transmission-gtk 2.84-1
tsmuxer 1.10.6-14
ttf-dejavu 2.34-2
ttf-ms-fonts 2.0-10
tzdata 2015d-1
udisks2 2.1.5-1
unrar 1:5.2.7-1
unzip 6.0-10
upower 0.99.2-2
usbutils 008-1
util-linux 2.26.1-3
v4l-utils 1.6.2-1
vi 1:050325-4
videoproto 2.3.2-1
vim 7.4.712-1
vim-latexsuite 20130126-2
vim-runtime 7.4.712-1
vlc 2.2.1-2
vte-common 0.40.0-2
vte3 0.40.0-2
wavpack 4.70.0-2
wayland 1.7.0-1
webkit2gtk 2.8.1-1
webkitgtk 2.4.8-2
webrtc-audio-processing 0.1-2
wesnoth 1.12.2-2
wesnoth-data 1.12.2-1
wget 1.16.3-1
which 2.21-1
wildmidi 0.3.8-1
wine 1.7.42-2
winetricks 20141130-1
wireless_tools 30.pre9-1
wpa_supplicant 1:2.3-1
wxgtk 3.0.2-4
wxgtk2.8 2.8.12.1-3
wxpython 3.0.2.0-1
wxpython2.8 2.8.12.1-1
x265 1.6-1
xboxdrv 0.8.5-3
xcb-proto 1.11-1
xcb-util 0.4.0-1
xcb-util-cursor 0.1.2-1
xcb-util-image 0.4.0-1
xcb-util-keysyms 0.4.0-1
xcb-util-renderutil 0.3.9-1
xcb-util-wm 0.4.1-1
xdg-su 1.2.3-1
xdg-utils 1.1.0.git20150323-1
xdiskusage 1.51-1
xextproto 7.3.0-1
xf86-input-evdev 2.9.2-1
xf86dgaproto 2.1-3
xf86driproto 2.1.1-3
xf86vidmodeproto 2.3.1-3
xfsprogs 3.2.2-1
xineramaproto 1.2.1-3
xkeyboard-config 2.14-1
xorg-appres 1.0.4-1
xorg-bdftopcf 1.0.5-1
xorg-font-util 1.3.1-1
xorg-font-utils 7.6-4
xorg-fonts-alias 1.0.3-1
xorg-fonts-encodings 1.0.4-4
xorg-fonts-misc 1.0.3-3
xorg-iceauth 1.0.7-1
xorg-mkfontdir 1.0.7-2
xorg-mkfontscale 1.1.2-1
xorg-server 1.17.1-5
xorg-server-common 1.17.1-5
xorg-server-devel 1.17.1-5
xorg-server-utils 7.6-4
xorg-sessreg 1.1.0-1
xorg-setxkbmap 1.3.1-1
xorg-util-macros 1.19.0-1
xorg-xauth 1.0.9-1
xorg-xbacklight 1.2.1-1
xorg-xcmsdb 1.0.5-1
xorg-xgamma 1.0.6-1
xorg-xhost 1.0.7-1
xorg-xinit 1.3.4-2
xorg-xinput 1.6.1-1
xorg-xkbcomp 1.3.0-1
xorg-xmessage 1.0.4-2
xorg-xmodmap 1.0.9-1
xorg-xrandr 1.4.3-1
xorg-xrdb 1.1.0-1
xorg-xrefresh 1.0.5-1
xorg-xset 1.2.3-1
xorg-xsetroot 1.1.1-2
xproto 7.0.27-1
xscreensaver 5.32-1
xvidcore 1.3.3-1
xz 5.2.1-1
yajl 2.1.0-1
yaourt 1.5-1
zenity 3.14.0-1
zeromq 4.0.5-1
zita-alsa-pcmi 0.2.0-2
zita-resampler 1.3.0-3
zlib 1.2.8-3
zvbi 0.2.35-1
zziplib 0.13.62-2
[edit5] My /etc/modules-load.d directory is empty by the way, and "sudo /usr/lib/systemd/systemd-modules-load" returns nothing. Note, this is all while running Linux 3.19, but I believe it should demonstrate that I don't have any special modules running. Or so I believe.
Last edited by nstgc (2015-05-04 13:16:09)

I can't update packages after upgrading pacman to 4.0.3

I know this was already treated broadly about two months ago, but I can't update after upgrading pacman because of continuous problems with certain signatures (at least one).
I have already tried this:
rm -rf /etc/pacman.d/gnupg
pacman -Scc
pacman-key --init
pacman-key --populate archlinux
But I still get this error when trying to upgrade the system:
error: virtuoso: signature from "Andrea Scarpino (Arch Linux) <[email protected]>" is invalid
error: failed to commit transaction (invalid or corrupted package)
Errors occurred, no packages were upgraded.
Could anybody help me? I'm pretty devastated with this.
Thanks!
My /etc/pacman.conf
# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
#GPGDir = /etc/pacman.d/gnupg/
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/curl -C - -f %u > %o
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#CleanMethod = KeepInstalled
Architecture = auto
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options
#UseSyslog
#UseDelta
#TotalDownload
CheckSpace
#VerbosePkgLists
# By default, pacman accepts packages signed by keys that its local keyring
# trusts (see pacman-key and its man page), as well as unsigned packages.
#SigLevel = Optional TrustedOnly
# NOTE: You must run `pacman-key --init` before first using pacman; the local
# keyring can then be populated with the keys of all official Arch Linux
# packagers with `pacman-key --populate archlinux`.
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# - URLs will have $arch replaced by the name of the architecture
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# The testing repositories are disabled by default. To enable, uncomment the
# repo name header and Include lines. You can add preferred servers immediately
# after the header, and they will be used before the default mirrors.
#[testing]
#SigLevel = PackageRequired
#Include = /etc/pacman.d/mirrorlist
[core]
SigLevel = PackageRequired
Include = /etc/pacman.d/mirrorlist
[extra]
SigLevel = PackageRequired
Include = /etc/pacman.d/mirrorlist
#[community-testing]
#SigLevel = PackageRequired
#Include = /etc/pacman.d/mirrorlist
[community]
SigLevel = PackageRequired
Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#SigLevel = Optional TrustAll
#Server = file:///home/custompkgs
Last edited by [DoodoM] (2012-08-03 23:39:56)

Thanks everyone! I guess it was a faulty mirror.
I also had problems upgrading glibc because /lib had to be linked to /usr/lib, but I fixed it seeking for helpful tips on the forum. What I did was move everything from /lib to /usr/lib, shutdown, start adding break=postmount to kernel line, mount the filesystem, remove /lib folder, link /usr/lib to /lib and reboot. Then I reinstalled glibc and everything went well.
Now some fonts look half-cutted in Gnome Shell when the window or panel which contains them is in background and I don't know why. But it is not the first time I have "graphical artifacts" with Arch Linux on this laptop. I think has something to do with the compositing.

Error in TFS Release Management Server after Upgrading to Update 3

Some weird and unexplained error logged in InRelease aka (Release Management) server event log after upgrading Release Management Update 1 to update 3.
Below error started getting logged only after upgrading to Update 3.
Even though we started the Inrelease Server and all agents but no luck.
Any immediate help would be much helpful.
----------------------------------- EVENT LOG ERROR ------------------------------------
Timestamp: 12/15/2014 10:22:18 AM
Message: 'LambdaValue>' is not of type 'ServerActivity'. When loading this instance you must ensure that the activity with name 'LambdaValue>' implements
'ServerActivity'.: \r\n\r\n at
System.Activities.ActivityInstance.System.Activities.Runtime.ActivityInstanceMap.IActivityReference.Load(Activity activity, ActivityInstanceMap instanceMap) at System.Activities.Runtime.ActivityInstanceMap.InstanceList.Load(Activity activity, ActivityInstanceMap
instanceMap) at System.Activities.Runtime.ActivityInstanceMap.LoadActivityTree(Activity rootActivity, ActivityInstance rootInstance, List1
secondaryRootInstances, ActivityExecutor executor) at System.Activities.Runtime.ActivityExecutor.OnDeserialized(Activity workflow, WorkflowInstance workflowInstance) at System.Activities.Hosting.WorkflowInstance.InitializeCore(IDictionary2 workflowArgumentValues,
IList1
workflowExecutionProperties) at System.Activities.Hosting.WorkflowInstance.Initialize(Object deserializedRuntimeState, DynamicUpdateMap updateMap) at System.Activities.WorkflowApplication.LoadCore(DynamicUpdateMap updateMap, TimeoutHelper timeoutHelper, Boolean
loadAny, IDictionary2 values) at System.Activities.WorkflowApplication.Load(Guid instanceId, TimeSpan timeout) at System.Activities.WorkflowApplication.Load(Guid instanceId) at Microsoft.TeamFoundation.Release.ServiceProcessor.Processor.WorkflowInstance.WorkflowInstanceCacheSingleton.<.cctor>b__1(WorkflowApplication
app, Guid id) at
Microsoft.TeamFoundation.Release.ServiceProcessor.Processor.WorkflowInstance.WorkflowInstanceCache.CreateApplicationInCache(CreateParameters createParameters, Guid id) at Microsoft.TeamFoundation.Release.ServiceProcessor.Processor.WorkflowInstance.WorkflowInstanceCache.GetInstance(CreateParameters
createParameters, Guid id) at Microsoft.TeamFoundation.Release.ServiceProcessor.Processor.WorkflowInstance.CachedWorkflowInstanceLoader.GetInstance(DeploymentLog log, CreateParameters createParams) at Microsoft.TeamFoundation.Release.ServiceProcessor.Processor.DeploymentControllerServiceProcessor.ContinueDeploymentWithFinalComponentState(DeploymentLog
log) at Microsoft.TeamFoundation.Release.ServiceProcessor.Processor.DeploymentControllerServiceProcessor.ContinueDeployment(String log)
Category: General
Priority: -1
EventId: 0
Severity: Error
Title:
Machine: **********
Application Domain: /LM/W3SVC/1/ROOT-1-130630102320068767
Process Id: 6628
Process Name: C:\Windows\SysWOW64\inetsrv\w3wp.exe
Win32 Thread Id: 1344
Thread Name:
Extended Properties:

Dear Charles-Li,
Thank you so much for your reply.
we started using Release Management Update 1 and it was worked perfectly fine. then we move to upgrade existing Release Management(server,
Database and agent) with Update 3, which we did, and its working fine except lots of error as mentioned in above thread, are getting logged in server event log at regular interval till now(3-4 errors every second).
even though lots of error are getting logged but we are not facing any issue while using Release Management with update 3.
But i am bit curious to know out reason for getting those error.
<<clean
the cache folder and restrat Release Management and try again>>
already tried but no luck.
Thanks!!

[SOLVED] Trying to load old kernel after upgrade

Hi, apologies in advance for asking this if it's a repeating situation but I searched and read for the better part of the day with no avail.
I updated to kernel 3.1.9 today and everything compiles fine, with no errors. After reboot is when it fails to load user specific modules, which I think I narrowed down to /lib/modules/3.1.8. That would make sense because with uname -r it is still showing 3.1.8 after -Syu and reboot but everything else is configured for 3.1.9. I checked the menu.lst and it is pointed to initramfs and the build of that was reported successful. I don't have any kernel .deps from AUR and I was updating with packer anyways. There is one error being reported in xorg.conf that Nvidia driver fails to load and no driver available even though it compiled without issue. Anyways I'm not sure what info to post for you to help me out, but I'll be glad to if you let me know.
Thank guys.
Oh and for the meantime I just downgraded the kernel and everything works fine. I know I could just stay on this setup and be good but I installed Arch specifically to challenge myself and learn.
Last edited by quantumfunk (2012-01-14 21:58:58)

Hi thanks for your response. I made sure to have /boot mounted during the upgrade but it did not alter the outcome.
It is in fact failing to load ACPI modules after the update. If that might be of some assistance.
I'm still reading as much as I can find, maybe you can point me in the direction of a thread that could help?
So far I'm following this one https://bbs.archlinux.org/viewtopic.php?id=114003 to no avail.
Last edited by quantumfunk (2012-01-14 20:02:26)

Firefox will lot load web pages after upgrading to version 3.6.6

After loading 3.6.6 I can no longer access the internet. Norton Internet Security 2010 has quarantined 3 Firefox files: nssdbm3.dll, freebl3.dll, softokn3.dll
== This happened ==
Every time Firefox opened
== I upgraded to 3.6.6. Firefox worked fine prior to upgrade. After upgrade, Norton told me there was a security incident and I needed to reboot. I have not been able to use Firefox since rebooting.

Thanks for the reply. It doesn't have to process the php, it just has to show the HTML content. It did that just fine before the last upgrade but won't now.
I've seen that page you referenced: http://kb.mozillazine.org/File_types_and_download_actions.
It doesn't help. The things it says to look for aren't there for me, specifically:
browser.download.pluginOverrideTypes
plugin.disable_full_page_plugin_for_types
I followed the rest of the instructions but it didn't help.
I did get it to quit opening tabs, instead it prompts me what it should do with the file every time now. What it should do, and used to do, is open the php page and display the HTML content.
Any other ideas?

Will not load any page after upgrading to latest vesion.

After upgrading to the latest version of firefox, my browser no longer loads any pages.

Hopefully one of these articles will help you resolve the issue:
[https://support.mozilla.com/en-US/kb/cannot+connect+after+upgrading+Firefox Cannot connect after upgrading Firefox]
[https://support.mozilla.com/en-US/kb/Firefox+cannot+load+websites+but+other+programs+can Firefox cannot load websites but other programs can]

Error "EPCF Undefined" in URL Iview after upgrading portal from 7.0 to 7.3

Hi All,
We have upgraded our portal from 7.0 to 7.3 recently. After upgrade when we are trying to open URL iviews(which will open a page in a sesparate window) it is giving some error in left bottom corner of browser. The error is as follows
Message: 'EPCM' is undefined
Line: 463
Char: 1
Code: 0
URI: http://<host>:50100/irj/portal?NavigationTarget=navurl://25fd58cd6bc575491c6b9c692e5debd6&InitialNodeFirstLevel=true&windowId=WID1318828789495
Please let me know the solution to solve this issue.
Thanks & regards,
Sandeep

Hi sandeep ,
Hence the problem was not there with previous versions where the .js files were simply not compressed by default.
Solution :
I believe switching off javascript compression is a suitable option in this case as the script files are usually cached by the browser as well and will not be transmitted every time.
Kindly follow these steps:
1. Enter the J2EE Config tool.
2. drill down: Global Server Configuration->services->http
3. on the right hand side, click on NeverCompressed
4. on the bottom, add at the end: ,*.js
5. Apply the changes
6. restart the J2EE.
After this clear the browser cache and then log onto the portal and check if the issue gets resolve
I hope it will useful to you.
Thanks@ Re grads
G.srinu

Error validating process flow VLD-10010 after upgrade from 9i to 11gR2

Upgraded OWB from 9i to 11g, and after upgrade all the process flows where throwing the below error while validating
VLD-10010: DIM_COUNTRY_UI's bound object DIM_COUNTRY_UI of type PLSQL Map has been deleted.
After synchronizing the mapping to itself, this error goes off, but synchroinzing in GUI for more than 300 mapping is huge task.
Anyway to sychronizing in bulk in OMBPlus?
Thank for help
Regrds
Samuel.

Hi
Plz, check /etc/hosts
is IP and computer name valid?

My iphoto library, located on time capsule ( +/- 50G) does not load at all after upgrade to OSX to Yosemite ?

Dear all,
I am guessing, this is not the end for accessing to my iphoto (last update) library, my life memories, but after upgrade to OSX Yosemite, my iphoto library, located on time capsule (+/- 50G) does not load at all. I have sent the report to Apple.
I am, worried to save or see my pictures back.
Thanks fo your help.
Clémentine

eurclem wrote:
Hi Larry,
Sorry, for the delay, in the meantime I have restored my previous OS.
But to answer you, basically , I use the time capsule as both a backup volume and an external drive.
It's a 1 To Capacity.
Best Regards,
Clémentine
That is a bad idea
1 - since you have files on the same disk as your backup you have no backup for those files which apparently includes you photos - having no b means it is just a matter of time until you lose them
2 - The TimeMachine backup grows until it fills the volume it is on - when the TC is full iphoto (and maybe other programs) will stop workig due to lack of space
You need at least two external hard drives - one for the iPhoto library (this one needs to be directly connected with a fast wired connection like Thungrbolt, Firewire or USB and be formatted Mac OS extended (journaled) ) and a separate EHD for you TM backup
LN

'Filter' failed printing error with Quark and Xerox 7800 after upgrading to 10.9.2

After upgrading to MAC OS X 10.9.2 from 10.8 I can no longer print from Quark 9.5.4 to a networked Xerox 7800 printer.
Get 'Filter' failed error.
Have deleted the printer and added it back several times but nothing has worked so far. Thanks for your help!!!
Process:         pstoxrps [668]
Path:            /Library/Printers/Xerox/Filters/pstoxrps
Identifier:      pstoxrps
Version:         ???
Code Type:       X86-64 (Native)
Parent Process: cupsd [350]
Responsible:     cupsd [350]
User ID:         26
Date/Time:       2014-04-01 12:39:57.100 -0500
OS Version:      Mac OS X 10.9.2 (13C64)
Report Version: 11
Anonymous UUID: 93027AFA-1CB5-0869-2634-CD8D5D806DDD
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000000
VM Regions Near 0:
-->
    __TEXT                 00000001016c0000-0000000101718000 [ 352K] r-x/rwx SM=COW /Library/Printers/Xerox/Filters/pstoxrps

Hope this helps:
https://discussions.apple.com/message/25353260#25353260
You can always try using the generic postscript and Generic PCL drivers as possible options

Having a protocol error and can't view sites after upgrading to iOS 8 on a iPad 2?

I can't access multiple sites on my iPad after upgrading is anyone else having this problem? Any way to fix it?

There are 2 ways to fix the issue:
1) Disable mod_spdy
2) Push Apple to fix Safari 8, b/c the problem exists in both iOS and desktop versions

Error in BPC Load infoprovider Package after upgraded BPC NW 7 to 7.5

Similar Messages

Maybe you are looking for