Error in BPM 1:N scenario

Copy the XML message from Runtime (SXMB_MONI), test it in Design time (mapping editor -> Test tab).. Check if mapping is successful..
-Siva Maranani

Hi Vshabir,
Problem is not with the scenario but with your payload.
We need to remove all the parent nodes like ns0:messages and ns1:Message1/2 from the Input files to avoid the mapping Error
For Example we have to send files as below.
<?xml version="1.0" encoding="UTF-8"?>
 <ns0:MT_SND xmlns:ns0="http://sumit_testing">
 <Name>Sumit</Name>
 <Location>Seepz</Location>
 <SALCODE>3070</SALCODE>
 </ns0:MT_SND>
Same thing is explained by me in
https://wiki.sdn.sap.com/wiki/display/XI/StepbyStepApproachforN-MMappingthroughBPM
Regards,
Sumit Gupta

Similar Messages

How to catch SAP application errors in BPM.

Hi,
I have a IDOC to Soap Sync Scenario where I send the message to a Webservice. I have used a BPM since we need to catch the resposne of this message and map it to a RFC. For ex if I get a success resposne I need to map success if not than I need to catch the error and map it to the RFC. Now here in some cases like if the target system (webservice) is down than XI raises a sap application error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: Connection refused (errno:239)</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Normally XI stops the process in these cases and does not proceed to the next step but I need to catch this message and map the content in the AdditionalText to the target RFC. Can anyone let me know how to catch this SAP Application Error in BPM and map it to the RFC.
Thanks,
Bhargav

Hi Gaurav,
As I have mentioned I need to catch the application error in the BPM. If you see the discussion that is mentioned after the blog you have mentioned it is stated that the fault messages or the application error cannot be caught in BPM.
In the blog that you stated we can catch the fault message and map it to a message structure but only to that extent after that it would stop the BPM process at that step but would not proceed further as shown in the screenshot given in the blog it would fail as "application error restart not possible".
I need to proceed further and capture this error to an RFC Structure and call a proxy.
Here after the error it does not proceed to the next step.
Thanks,
Bhargav

Sync/Async brdige error in BPM

Hi,
I am working on RFC-TO-Webservice scenario(Synchronous) and I am using the BPM in this scenario.
In BPM just I have used 2 steps.
Receive - Opened Sync/Async bridge
Send - Synchrouns step
Send - Cloase the Receive step
Send - Asynchrous send step (to send the response to the file...).
When I sent my RFC message from R/3 I am getting following error.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">PL_TIMEOUT</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Timeout condition of pipeline reached</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
I am using PI 7.0 SP13 is why I am not able to receive the Sync message in BPM...I have created the abstract interface based on RFC...getting the first message itself Timeout error.
I am trying to use Sync/Asnc bridge in BPM. First message itself PL_TIMEOUT error..bpm is not able to receive my rfc request...
I need help on this...do I need to do any settings in WEBAS level..I did Timeout setting in SXMB_ADM.
Regards,
Venu.

hi,
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken]
check this blog..and same thing I did in my scenario
my scenario is RFC-TO-Webservice.
Sync/Async bridge can't we use like this ...Receiver step(open sync/async)-> Send(Synchronous)-Send(Close sync bridge)....that way can't we use ...
I am not able to receive the RFC request itself inside my BPM first step...getting the Timeout error.
But when I use the RECEIVE STEP with Asynchronous mode..I am able to receive the message inside my bpm.Incase of Synchronous I am not able to receive the message..
I am working PI 7.0 and SP13..did any body worked this version...
Thanks,
venu.

BPM n:1 scenario(file-file). everything is fine.output file not genarating

Hi friends,
I am doing a BPM N:1 scenario,
1.my ip(integration process) is at status 0 in sxi_cache.
2.No problem with SWF_XI_CUSTOMIZING.
3.after running my 2 commumication channels for 2 input files the flag is correct(black n white) in MONI.
But when i see the file in destination directory , it's not appearing there.
Any suggestions???

Hello,
Check all the queues SM58, SMQ1, SMQ2. Check the RWB for the messages on the adapter engine.
Also, you will have to check the workflow log. Go thru the following steps.
Scroll the successful message in the monitor to the right to see columns like Inbound or Outbound. You will see a value PE in one of the column. On clicking it, you will go into the workflow log. Then, goto the technical details. You will see all the steps configured in the BPM and various tabs below which gives minute details about each step. Look for errors in any of the step bu going thru the details.
There might be the case that the mapping itself might have gone into error. Or some step inside the BPE is in a waiting mode.
Regards,
Akshay

Error in mapping program in scenario

Hi all,
here i am facing an issue which is to be fixed very urgently. please help me masters.
here i am having a single source structure and multiple receiver structures. after confirming many sources i finally started my work with the help of this blog.
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
But now i am facing a problem that my mapping program and interface mapping are executing the file successfully when i tested in the test tab of both of them.
When i tried to test my scenario in TOOLS-----TEST CONFIGURATION . there it is showing error in the interface determination/mapping step.
here on the receiver side we are going to use proxies. for that we used XI adapter.
please check the above blog and let me know whether my total procedure is perfect or not
THANKS in advance to all .
HELPFUL ANSWERS WILL BE REWARDED.

Hi Ramana !
Could you take a screenshot of your error and put it in www.imageshack.us, then give us the link to see exactly which error are you getting. Please expand the node of the error message.
Does the scenario works actually?? I've noticed some cases where the test tool gives errors but once the scenario is running everything works fine.
Regards,
Matias
Message was edited by:
Matias Denker

Permenant error in bpm inbound processing error in inbound queue of pi7.1

Hi Experts,
In E filling scenario in SAPPI7.1, iam facing a problem. i.e In sxmb_moni message monitoring, the message was schedule at outbound side.when i extend that, the message was stuck in smq2 with "permenant error in bpm inbound processing".can any one please tell me how to relove this issue.
Thanks & Regards,
Giri.

Hello
Check the note #1126656 BPE-TS: Permanent errors in the BPE inbound processing. This describes some possible causes and solutions for this error.
Regards
Mark

BPM problems on PI (XI 7.0) - internal error - Does BPM work in PI for you?

Hi guys!
This is the 2nd time I get into the troubles with BPM on PI. On XI 3.0 I had never problems. But on PI when I use BPM I get following error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">SYSTEM_FAILURE_INTERNAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Es ist ein interner Fehler aufgetreten</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
SAP:Stack tag means in english: An internal error has occured.
My scenario is:
Idoc sent from R/3
Mapping to Integration Process (BPM) inbound interface format
Message receiver in Int Proc (start of BPM)
sync call to web service (inside Int Proc)
web service response sent out from BPM (end of BPM)
mapping of ws response to target structure (idoc)
Idoc sent to r/3
I don't know, what could be wrong. In SXI_CACHE I have return code 0 for this Integration Process, so it should be ok.
Any ideas? Does BPM work in your PI environment?
Thanx a lot foro help!
Olian.

hi,
>>>>Any ideas? Does BPM work in your PI environment?
of course it does
it might mean that your installation was not done properly (or XI configuration during installation) but it has nothing to do with BPM
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Block1 (No agent) Error in BPM ?

Hi friends ,
 I am trying the the BPM scenario using Integration Process
BpmPatternCollectTime
from SAP BASIS ® SAP BASIS 7.00 in the namespace http://sap.com/xi/XI/System/Patterns
I have done the scenario like the above . I have followed all the Steps which are used in above scenario.
I am using a File Sender Adapter and Receiver Adapter .
It is Successfully picked up the File but nothing is happening after that .
I am using two receiver Determination one from Ob to IP and other from IP to FIleReceiver ( IB) .
But, I am Getting error as Block1 (No agent) Error in the PE graphical diagram
I have checked in SWWL my Integration Process Return code is "0"
Can you please tell tell me how to solve this ?
Can you please tell me this scenario is like Multiple Purchase Order Items to One Purchase Order
Here they have given ID adn OverAllNumber . For ex. In one xml file I am sending
ID as A100
OverAllNumber as 120
next 5 minutes putting the another file with contents
ID as A100
OverAllNumber as 130
My Question is
Will TWO files wiil come as Output in File Receiver ?
 I am Clear in this please give some suggestions
Best Regards.,
V.Rangarajan
Best Regards.,
V.Rangarajan

Hi,
 Thanks for your reply.
 once the files are connected in the transformation step you will use a N:1 mappping.
 Yes , i have done as same . I have set deadline as 15 minutes .
My doubt is
 if N:1 
First File
ID as A100
OverAllNumber as 120
next 5 minutes putting the another file with contents
SecondFile
ID as A100
OverAllNumber as 130
 Then what will be the output ?
 will it be like this
 ID as A100
 OverAllNumber as 130
 I am not clear in this Please tell me !
 If possible please give some suggestion to clear this Block1 (No agent) Error in BPM ?
Regards.,
V.Rangarajan

Error in BPM: FIle to RFC

Hi friends,
   I am working on File --> RFC ---> File Scenario using BPM ...
Here I am getting system error in BPM and showing broken red brick in workflow at sender1 ...
I have given like this...
Start --> Receiver ->sender1>Sender2 ---> Stop.
I have given properties... for each
C2 = Abstractinterface FIleResponse_Abs
Recevier
1)Step Name = Receiver
Message   = C1 (I defiend in container Category =Abstact interface type = FileRequest_Abs)
Start process = (Selected)
Mode = Asynchronous
2)Sender1
Step name = Sender1
Mode =Synchronous
Synchronous Interface = FileRequest_AI
Request Message= C1
Response Message=C2
3)Sender2
Step Name =Send2
Mode = Asynchronous
Message = C2
After Configartion,I have placed the sender sample XML in Server ...it is picking up properly.But
it showing error while it was executing in the BPM. Please suggest me what i have to do.
If you didnt understand I ll give some more details.
Pls help me in this regard.
With Regards,
Raju.

I am getting error in Integration Engine.....
Attribute     Value
Engine     Integration Engine
Status     System Error
Repeatable     No
Cancelable     No
Start     20.06.2007 06:25:22
End     20.06.2007 06:25:22
Sender Party
Sender Service     BPM_FILE_RFC_SAGAR
Sender Interface     http://File2RFC_Syn
FileRequest_AI
Receiver Party
Receiver Service     ECCIDOC800
Receiver Interface     urn:sap-com:document:sap:rfc:functions
BAPI_SALESORDER_GETLIST
Quality of Service     Best Effort
Error Category
Error Code
Message     9BA7365DDBC0FE49B9F512F7308DDA53
Reference

Hi, In a IDOC --- XI(BPM)--- SOAP Sync Scenario failrure.

Hi, In an IDOC ->XI(BPM)->SOAP Sync Scenario I observed recently messages are failing in SXMB_MONI with an error as:
com.sap.aii.af.ra.ms.api.DeliveryException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: System.Web.Services.Protocols.SoapException: Server did not recognize the value of HTTP Header SOAPAction: http://172.16.209.162/esdryrun/ContractData_Push. at System.Web.Services.Protocols.Soap11ServerProtocolHelper.RouteRequest() at System.Web.Services.Protocols.SoapServerProtocol.Initialize() at System.Web.Services.Protocols.ServerProtocol.SetContext(Type type, HttpContext context, HttpRequest request, HttpResponse response) at System.Web.Services.Protocols.ServerProtocolFactory.Create(Type type, HttpContext context, HttpRequest request, HttpResponse response, Boolean& abortProcessing)
friends, could u plz help on this.
Thanks,
satya.

Hello,
This indicates a configuration issue with this SOAP receiver adapter. Please check the on line help for the configuration of the SOAP adapter (the link is below). Please set the indicator in the "SOAP Action" field.
Configuring the Receiver SOAP Adapter
http://help.sap.com/saphelp_nw70/helpdata/EN/29/5bd93f130f9215e10000000a155106/frameset.htm
(Below is the extract from the link)
SOAP Action
Specify the SOAP action. The action specifies the value for the
SOAPAction in Web service messages; set the indicator.
Regards,
Sarah

Catch Mapping Error in File to IDoc scenario

Configured BPM and now learning Error Handling. I know that through BPM we can handle system Errors, but I doubt whether Mapping error is a system error.
I am interested to know the classification of errors with examples, preferably listing out all types of errors.
Please provide some weblogs or explain briefly how to handle system and application errors through BPM.
Thanks,
Raja

Hi Raja,
You will need CCMS if you want to send the Alerts to external system or you want to access the ALerts from the transaction. You can capture your alerts without this also.
When you go to Alert Configuration in the Runtime Workbench you can see Create Alert Rules. These rules are pertaining to the error generated in your AF,AE or IE.
Once you have completed the whole config. The error happening in the AE, IE or AF would trigger the alert. you can see this in your Alert Inbox.
The best would be if you go through the URL I have mentioned below.
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/content.htm
You have to use BPM only if you want to do an activity after the alerts are raised.
Regards
Vijaya
Message was edited by: vijaya kumari

Mapping Errors in BPM

Hi All,
How can the mapping errors in BPM be handeld implicitly (without the use of Exception Handling Branch)
Regards,
Anurag

Hi Anurag.
Handling the mapping exceptions in BPM could be possible using the Alerts.
Go through this blog for Alert Configuration:
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
And also go through this thread:
alert in BPM
Hope this helps you.
Regards,
Hari.

Configuration Scenario for BPM Using Integration Scenario

hi All,
I Have an Scenario where i am using BPM. Most of the blog tells about manually creating all Configuration objects. I had created an Integration Scenario for this scenario by referring to the earlier threads available for same.
Hoe to Create Integration Scenario for BPM Scenario
Integration Scenario in BPM and few more.
My IS looks like
Sender App Component - Integration Process - Receiver App Component
Now when i am trying to create Configuration scenario for same using model configurator, i am getting Model as "Not Configurable"
And when i click "Configurability Check" Button, i am getting below as status:
Component view IS_POC_BPM: Connection from receivePayload to getABSPayload does not have an inbound service interface
Component view IS_POC_BPM : Connection from sendABSPayload to getPayload has no outbound interface
getABSPayload and sendABSPayload are actions for Abstract interfaces.
IS_POC_BPM is the Integration Process Name.
Also in Integration Scenario, when i create connection between sender action to BPM action there is no inbound interface coming. And viceversa.
Please help me in identifying if i am doing any thing wrong in creating this scenario.
Is it possible to create Configuration Scenario for BPM Using Integration Scenario?
Thanks,
Mayank
Edited by: Mayank Gupta on Apr 21, 2010 6:35 AM

I think you shoudl refer the available Integration Scenarios created for BPMs in IR --> SAP BASIS --> http://sap.com/xi/XI/System/Patterns
Sender template will have the Action with Outbound Service Interface and then in the BPM Template the action will have Inbound Interface.....then within the BPM itself this inbound will be mapped to Action with Abstract Interface
may be after looking the Integration scenarios you will get more idea
Regards,
Abhishek.

BPM Collect Pattern Scenario :Container is empty for the loop at run time

Hi Friends,
I am working on BPM Collect Pattern Scenario after looking into the example delivered by SAP in namespace http://sap.com/xi/XI/System/Patterns and IP name as BpmPatternCollectPayload.
After configuring the same and when it is run, I see strange behaviour as illustrated below
1. Container step is empty and not able to see the counter for which it needs to be incremented at runtime
2. I understand that Loop should start and it need to be incremented as when we get a new message into the same BPM.
But I observe that it is creating a new message and loop never stops and completes the condition and comes out to go to next step.
Request your help.
Regards,
Hussain

Hi,
define or declare a variable with name counter and type as integer in Container where you define abstarct variables...
Thanks,
Madhu

BPM in Integration Scenario

Hi Everybody,
I have some queries on BPM in Integration Scenario.
In the BPM i will be using
1.A Receive step to collect the data from database.
2.A synchronous send step to send a request and get the response from the same database.
3.Finally a send step to send the data out of BPM to another system.
Somebody can guide me about how to incorporate BPM in the integration scenario(how many actions i need to create for the BPM).
Expecting your replies.
Thanks,
Zabiulla

Hey Mohammed,
you'll have 3 application components:
1. database;
2. BPM;
3. the 3rd system.
The actions you need are:
1. sending action (outbound async interface) @ database;
2. receiving action (abstract async interface) @ bpm;
3. sending action (abstract sync interface) @ bpm;
4. receiving action (inbound sync interface) @ database;
5. sending action (abstract async interface) @ bpm;
6. receiving action (inbound async interface) @ 3rd system.
The connections you need are:
1. async connection between database & BPM;
2. sync connection between BPM & database;
3. async connection between BPM & 3rd system.
Regards,
Henrique.

Error in BPM 1:N scenario

Similar Messages

Maybe you are looking for