Error in Bulk Report Generation using SSIS and SSRS 2008 R2

Hello,
upon having solved development issues via this forum I am facing problem in practice. Namely, there are suppose to be created  200 .PDF files. I am facing "strange" outcome because, sometimes I am getting all the files created, sometimes less
then 200 (different number of files produced) upon which I face this error related to DS2:
System.Web.Services.Protocols.SoapException: An error has occurred during report processing. ---> Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException:
Cannot read the next data row for the dataset DataSet2. ---> System.Data.SqlClient.SqlException: Internal Query Processor Error: The query processor encountered an unexpected error during execution.
   at Microsoft.ReportingServices.WebServer.ReportExecution2005Impl.InternalRender(String Format, String DeviceInfo, PageCountMode pageCountMode, Stream& Result, String& Extension, String& MimeType, String& Encoding, Warning[]&
Warnings, String[]& StreamIds)
   at Microsoft.ReportingServices.WebServer.ReportExecution2005Impl.Render(String Format, String DeviceInfo, PageCountMode pageCountMode, Byte[]& Result, String& Extension, String& MimeType, String& Encoding, Warning[]& Warnings,
String[]& StreamIds)
   at Microsoft.ReportingServices.WebServer.ReportExecutionService.Render(String Format, String DeviceInfo, Byte[]& Result, String& Extension, String& MimeType, String& Encoding, Warning[]& Warnings, String[]& StreamIds).
Please, how to cope with this? Normally, run query (DataSet2) within either Report Builder or SSMS retrieves the data with no troubles. But, when I run it from SSIS (script component), it produces error as above.

Thanks,
I did both, went through the proposed thread and found problem in DS2. The problem was my VIEW which was providing values for the row grouping in my SSRS report. Namely, upon replacing it with corresponding table, I tried to set PK on mentioned column but
with no success due to double values! Upon correcting i.e., removing duplicate values, it works well. I only wonder why SSIS did not create these, actually, duplicate .PDF output files and let the Windows explorer to ask me: There is already such file. Would
you like to replace it etc......etc...
Instead of that, SSIS Script Component just went RED coloured and stopped processing PDF output files...
Thanks for reply
bye

Similar Messages

  • Using SSIS and SSRS with Essbase

    In Essbase, is it possible to do your ETL function using Sql Server Integration Services? And generate reports from the cube using SQL Server Reporting Services?
    TIA

    Yes on the first, then output to a table or view for Essbase to pick up through data load rules, ODI, DIM, EIS, or Studio. I'm sure I've forgotten something else, but there are a lot (too many, actually) of ways to get data into Essbase.
    No on the second as Essbase would need to be a supported data source to SQL Server Reporting Services. I don't believe there's an out of the box solution for that. There is always the Java API but now the level of complexity has gotten very high.
    Regards,
    Cameron Lackpour

  • Error 7 with Report Generation Toolkit

    Hello Everyone,
    I'm trying to generate an Excel sheet report for some readings using "Report Generation toolkit" But when trying to generate the report, the report generation part of code is executed and gives Error(7) and there is no report is generated.
    The Code I use is atached in the following Link:
    https://www.dropbox.com/s/9n4brimucsd0xts/Report%2​0Generation.rar
    Can I get help please?
    Thanks in advance
    Solved!
    Go to Solution.

    I was able to download and open your compressed file.  I unpacked it into a folder.
    There are numerous peculiarities that lead me to ask "Are you trying to learn LabVIEW on your own, without a mentor and without training and guidance"?  Here are some of the things that I noticed:
    Although a Report Generation .lvproj, .aliases, and .lvlps file, the Project, when opened, was empty!  Since Projects were added to LabVIEW, almost all development should take place in a Project, but you do not appear to be doing so.
    You have an Event Loop (good) to handle pressing Start, Stop, and Report buttons.  But instead of using Boolean controls with a Latch property and using a "Value Changed" event, you use Switch Until Released (which, so far, I've never used) and a Mouse Down Event.  I suppose this could work, but I've never seen this pattern.
    You are writing an Excel Report, but are not using the Excel-specific VIs (such as Excel Easy Table).  Why (or Why Not)?  The basic idea of an Excel Report is that you create the 2D text data you want to write into Excel, then with a few simple VIs, you open Excel, write the Table, and save the Report.  In particular, you don't write out something that resembles the columns of the first few rows of a Spreadsheet (Date, Time, Test, etc.).
    Now to your specific question, Error 7.  Do you know what this error means?  If you click on Help, choose Explain Error, and put in 7, you will see this means "File Not Found".  Well, there is an obvious place where a File is used, right when your program starts.  I recommend that you put a Probe (do you know about Probes?) or an Indicator on the path going into the main For loop and see what File you are trying to open (hint -- there's an error in the way you build the path, but you should be able to figure out how to fix it).
    Good luck.  Hope these suggestions get you on a Better Path.

  • Error message when importing data using Import and export wizard

    Getting below error message when importing data using IMPORT and EXPORT WIZARD
    Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.
    <dir>
    <dir>
    Messages
    Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.
    An OLE DB record is available.  Source: "Microsoft SQL Server Native Client 11.0"  Hresult: 0x80004005  Description: "Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'.
    Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.".
    (SQL Server Import and Export Wizard)
    Error 0xc0209029: Data Flow Task 1: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR.  The "Destination - Buyer_.Inputs[Destination Input]" failed because error code 0xC020907B occurred, and the error row disposition on "Destination
    - Buyer_First_Qtr.Inputs[Destination Input]" specifies failure on error. An error occurred on the specified object of the specified component.  There may be error messages posted before this with more information about the failure.
    (SQL Server Import and Export Wizard)
    Error 0xc0047022: Data Flow Task 1: SSIS Error Code DTS_E_PROCESSINPUTFAILED.  The ProcessInput method on component "Destination - Buyer" (28) failed with error code 0xC0209029 while processing input "Destination Input" (41). The
    identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.  There may be error messages posted before this with more information
    about the failure.
    (SQL Server Import and Export Wizard)
    Error 0xc02020c4: Data Flow Task 1: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
    (SQL Server Import and Export Wizard)
    </dir>
    </dir>
    Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED.  The PrimeOutput method on Source - Buyer_First_Qtr returned error code 0xC02020C4.  The component returned a failure code when the pipeline engine called PrimeOutput().
    The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.  There may be error messages posted before this with more information about the failure.
    (SQL Server Import and Export Wizard)
    Smash126

    Hi Smash126,
    Based on the error message” Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'. Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting
    autogrowth on for existing files in the filegroup”, we can know that the issue is caused by the there is no sufficient disk space in filegroup 'PRIMARY' for the ‘REPORTING’ database.
    To fix this issue, we can add additional files to the filegroup by add a new file to the PRIMARY filegroup on Files page, or setting Autogrowth on for existing files in the filegroup to increase the necessary space.
    The following document about Add Data or Log Files to a Database is for your reference:
    http://msdn.microsoft.com/en-us/library/ms189253.aspx
    If there are any other questions, please feel free to ask.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Is it possible to load multiple .xlsx files into a SQL Server Table using SSIS and a Foreach Loop Container when each Excel spreadsheet is comprised of two different worksheets

    So we have an Invoice .xlsx File from a 3rd party vendor. It contains two worksheets..."Enrolled" and "Engaged". The data and data columns in each worksheet is different. Is it possible to loop through multiple .xlsx files using SSIS
    and a Foreach Loop Container for each spreadsheet, and then another Foreach Loop Container to control each worksheet, and pump the Excel data into a SQL Server Table first for "Enrolled" and then for "Engaged"? How can I control the Foreach
    Loop Container in SSIS to process ONLY the "Enrolled" worksheet first? And then the "Engaged" worksheet next?
    I know I have multiples out here and I apologize for that...but right now it seems as though I take three steps forward and then two back.
    Any help would be GREATLY appreciated!
    Thanks in advance!

    If the structure of the Excel sheets does not change from file to file then you can by having one ForEach Loop processing always the "Enrolled" sheet and another always the "Engaged" this is doable because the Excel OLEDB connector allows
    to pick individual sheets, it is problematic therefore when sheet names themselves change.
    MSDN has an example: https://msdn.microsoft.com/en-ca/library/ms345182.aspx
    Arthur
    MyBlog
    Twitter

  • I Need some Itractive Reports not using alvs and any other advanced

    I Need some Itractive Reports not using alvs and any other advanced topics like include and any other i need simple Intractive reports.

    Hello,
    Check this sample reports:
    Program name                   Report title
    DEMO_LIST_INTERACTIVE_1        Creating Detail Lists
    DEMO_LIST_INTERACTIVE_2        List Administration
    DEMO_LIST_INTERACTIVE_3        Page Headers in Detail Lists
    DEMO_LIST_INTERACTIVE_4        Messages in Lists
    If useful reward,
    Vasanth

  • Error building .EXE Report Generation Toolkit

    Whenever i try to build my application this error message shows up.... Error 1502 ocurred at AB_source_VI.lvclass:Close_Reference.vi -> AB_Build.lvclass: Save.vi
    it says the possible reason is Word_Open_Document.vi
       I'm using the report generation toolkit for office.... I really need to build this application soon!! 
    Please Help!!!
    Thx in advance
    Wong

    I finally made it work... As a reference, i upgraded from labview 2011 due to windows 8 incompatibility, and found that the installer kept showing these error messages. 
    I read in another post that if you opened the troubled VI and just clicked on the property nodes to browse and then ok, you just saved the VI, restarted labview and the error message disappeared. To my surprise IT WORKED!!!  I had to do it on several excell.llb VI's too. 
    Maybe you could report this bug in the report generation toolkit as a part of the NI team.
    thanks!!!
    Wong

  • Error -2146827284 with report generation 1.1.4

    Hi. Im working with Report Generation 1.1.4 and I was testing it for exporting data to an excel book. I was making some vi's to learn how to use it and do what I need it for. I need to take two non constant numeric values and save them in an excel table of two columns and graph them. The error comes when I transpose the original matrix, so i can have 2 columns instead of 2 rows in excel. In the picture you can also see that no graph is displayed. If anyone knows has experience doing this kind of activities between labview and excel I would appreciate some help! Thanks!
    Attachments:
    2 columns table xcel report generation test.vi ‏11 KB
    test.JPG ‏165 KB

    Why are you turning your array into a matrix?  A matrix is not the same thing as an array.  (They are related, but are not truly the same thing.)
    Turn on context help and read about all the inputs into the charting function.  You want to have a 2-D array.  You are actually only starting off with a 1-D array.  (Which you can't transpose if you wanted to because it is only 1 dimensional).  Create a 2-D array of data to feed into the charting function.  If you need to transpose that you can.  Don't play with matrix transformations, they are rarely used and only for special math operations when they are.  Wire up any other inputs to the charting function as needed.  The default chart type is xlColumnClustered which I am going to guess is not truly the graph you want.  You probably want an XYscatter.

  • Report Generation using Citadel & Excel in VB

    I want to generate report using citadel sql server, i,am using excel for report viewing. I have written a Visual Basic code for fetching data from srq to excel. The problem is when i fetch all the fields from sql it generate report, but when i gave a single variable name like Mycomputername/process/pot1@value it give a error column:Mycomputer not exsist.
    Given below is the code wriiten to get the value.Please suggest ASAP
    '****** GET HEPTANE RECORDS ******
    Sub GetHEPTANERecords(ByVal rNumber As Integer, ByVal dDate As Date, ByVal sTime As Date, ByVal eTime As Date)
        Dim ReadHEPTANE As ADODB.Recordset
        Set ReadHEPTANE = GetConnection.Execute("SELECT TRANSTECH34/SRS/LVL_GALL_TK1  FROM IntData WHERE [LOCALTIME] BETWEEN '" &
    sTime & "' AND '" & eTime & "'")
    Thanks & regards
    Mantosh

    Mantosh,
    Have you seen this developer zone article which details accessing Citadel Data using COM+ and ADO?
    http://zone.ni.com/devzone/conceptd.nsf/webmain/725A6C3843F13C8786256EA600633724#6
    Also, this KB article provides more detail on how to access Citadel data using SQL commands and I think will help answer your question:
    http://digital.ni.com/public.nsf/websearch/C7D32F9A59D4637086256A7200692F30?OpenDocument
    --Paul Mandeltort
    Automotive and Industrial Communications Product Marketing

  • Help needed for report generation using java technologies

    May i get some idea about report generation api available. some report generation tools that can be downloadble. can you please suggest how to use scheduling the printers or report generation by scheduling.

    e.g. for one of my school project which generate reconciliation report (banking project) we add in a letterheader and the rest of the information presented below.
    but there is some problem here.
    either you "catch" no. x row where the printing will be trancated then prevented it from trancated by formatting your pages such that data will not be printed in that region.

  • Error on WWI report generation

    Dear all,
    for our new ECC 6.00 EhP5 system we set up a new WWI server on Windows Server 2008 R2, everything has been set up accordingly and the RFC calls are working fine.
    When we tried to generate the first report with a dummy template (only ph value is included and "Report from Value" runs fine) we receive the following error:
    17.11.2011 09:50:41 Job started
    17.11.2011 09:50:41 Step 001 started (program RC1WWIWP, variant , user ID DE_BTC_BUS)
    17.11.2011 09:50:41 Problem occurred during report generation; check the report log
    17.11.2011 09:50:42 Generation error on WWI server SV001
    17.11.2011 09:50:42 Internal program error; (SAPLC1F3 C1F3_GEN_RAWREPORT_CB API_READ 0120)
    17.11.2011 09:50:42 Job finished
    Unfortunately I was not abel to find something assigned to this in OSS.
    Does anybody have faced something similar before?
    Any hint is more than welcome!!!
    Best regards,
    Christoph
    Add. information: I don´t know whether this is important but the process is creating a document SBR that you can see in CV04N.
    Edited by: Christoph Giehl on Nov 18, 2011 12:27 PM
    Problem was fixed - missing authorizations with the batch user.
    Edited by: Christoph Giehl on Nov 18, 2011 2:11 PM

    Problem occured due to missing authorizations of batch user.

  • Problem-Report generation using shell script

    Hi
    We have the Production database and the Reporting database (copy of Production database),
    both on Oracle 9.2.0.5 and Solaris 5.8. There is a package inside the Oracle database, which extracts some data from inside the
    database, and would generate a report. A shell script has been created in Solaris which would
    send in the parameters and call the pakage to generate the report. The parameters it is sending is
    the name of report to be generated, and the location where it is to be generated, both hard-coded into
    the script. The script is scheduled to run through crontab.
    The problem we are facing is that, if we run the script for Reporting database, it successfully
    generates the report. But if we use that script for Production database, it gives the error
    "Invalid directory Path". I have tried using various other directory paths, even '/tmp'
    and '/', but it still gives the same error when executed for Production dataabse.
    Could somebody provide any ideas what might be going wrong.
    The reasons it is to be executed on Prod db and not the Reporting database are unavoidable.
    It anyway runs in off business hours and takes about 10secs to execute.
    Please do let me know if there is any other info that I missed to provide here.
    Thanks in advance...

    I will be just guessing because you didn't provide contents of script and package.
    The "Invalid directory path" as you said could be ORA-29280 due non existent directory.
    Try execute (as sys or system) select * from dba_directories; (or select * from all_directories; as user which the script is login to) on both databases and compare the results. If there is missing your important directory then create it using create directory <dirname>; (from sqlplus and don't forget to grant rights for user).
    This error could come from shell script. In that case you should find resolution yourself because you didn't provide script source.

  • Report generation using jsp

    I am developing a website using jsp on tomcat.The site required a number of online report generation option from database(mysql).
    My problem is-
    1.how to generate different types of report other than simple html tag embedded within jsp .
    2.How to store all those reports in a file(.txt or .doc).
    N.B I dont want to use any reporting tool.

    Mantosh,
    Have you seen this developer zone article which details accessing Citadel Data using COM+ and ADO?
    http://zone.ni.com/devzone/conceptd.nsf/webmain/725A6C3843F13C8786256EA600633724#6
    Also, this KB article provides more detail on how to access Citadel data using SQL commands and I think will help answer your question:
    http://digital.ni.com/public.nsf/websearch/C7D32F9A59D4637086256A7200692F30?OpenDocument
    --Paul Mandeltort
    Automotive and Industrial Communications Product Marketing

  • Error while accessing a library using content and structure

    I have a library having document and folder inside it. When I open the library using content and structure I get an error with a correlation ID. When checked the the logs with Correlation ID got an error message "View 'All Document' does not exist."
    'All Document' is name of default view on the library.
    When I open the library from view all site content the library is being opened.
    Please help!!!

    Hello Victoria,
    Thanks for  the response.
    I have tried troubleshooting steps given by you. 
    Check if the issue occurs with other users. Use another user to access the library in Content and Structure and then compare the results. --
    I tried with different users but no luck
    Make sure that the user account with issue has permission to view the All Documents view of the library. --
    Yes, user Account have the permission
    Check if the issue occurs with other libraries in the Content and Structure. If not, I recommend to save the library as
    a template including contents and then create a new library based on this template. After that use the new library instead of the old library. --
    No other library have this problem. I cannot save the library as template including the contents as the it has many folders and  files. The current size of library is 786 MB
    Clear cache in the browser or use another browser to see if the issue still occurs. --
    tries but issue persists.
    Best regards,
    Ratnesh

  • Crystal Report generation using XML

    I have some reports that were created using XML and as I recall when I created them using CR v. 9 I used a connections called ADO (Xml) or something like that. On one of my machines I have CR XI and the only option available is XML and when I add a field from this connection it inserts: "{NewDataSet\TableName.FieldName}" however, previously when I used the ADO XML connections it only inserted {TableName.FieldName}. In the version 9 CR i was using the professsional version and in the version 11 CR it is still the professional version but I can't seem to create an XML connector that doesn't prefix the table/field with "NewDataSet". My request is two fold, first, can you please direct me to some articles that I can read to better understand how to generate  CR from XML? My project is to generate the XML and then set the xml during runtime into the report using SetDataSource and then display the report using the CR viewing that I package and redist with my app. Secondly, why does the ADO XML connector not available in CR XI professional version and is there any way to get the CR v. 9 behaviour back?
    Thanks,
    Marcus

    Hi, Markus
    If you are planning to run reports from a .NET application, you need to have the Developer edition, not the professional.
    The ADO.NET Driver is not installed by default. Go into Control Panel - Add / Remove programs, and chose Crystal Reports, and change. You can expand the Database drivers, and you should see the ADO.NET driver there. Note: you need to have the .NET framework installed for this to work.
    Regards,
    Jonathan

Maybe you are looking for

  • Wait Activity Problem in OBPM 10GR3

    Hi all, We have a recent problem with our Wait Activity. We have a definite interval of 5 mins to the wait activity passed on through a business parameter. But for some reason, the Wait activity is behaving awkwardly. It sometimes, waits for less tha

  • Camera app problem after updating to 8.0.2

    FFacing hanging up of the cameri app while opening through locked screen and even through normal way wwhat to do

  • Install error for Adobe flash 11.8

    I work at a school that uses Smart Tech (smartboard interactive). With the new version of Adobe Flash, the animation will not work. I need to downgrade Adobe Flash to 11.8 version in order for the Smarttech (smartboard) to use the animation portion o

  • Group policy of Trusted Sites don't update on some machines

    We have some machines which the trusted sites policy don't update anymore. Where all the other computer do update their list of trusted websites. They are in the same OU and receive the same policies. But when I compare an export of the registry of t

  • Error running old programs

    IE: java xxxx gives me a class not found error. OK, restart. Same error. The programs I'm running I've run hundreds of times before. Java doesn't recognize any java classes actually. I'm going to reinstall, but has anyone run into this before? Oh yea